Related
Hi, i have a problem, I need some help solving it.
I have branded Hero (G2 Touch) on T-Mobile. Being tired of waiting for T-Mobile to release their branded 2.1, I followed some instruction on this board and installed generic 2.1. Sadly, the instruction used the RUU for directly installing 2.1 and I did this^^
When I try to install an old 1.5 RUU (t-mobile or generic) I always get the error 140 bootloader version.
I then tried the rooting method, now I managed to install the Amon Ra's Hero Recovery and that works quite good, as I now can use nandroid again (I couldn't do since the 2.73 update).
I managed to restore some backups that were on 1.76, and I had android 1.5 installed again, but still I couldn't install the 2.73 RUU, still getting the bootloader error.
Now, either somebody can tell me how to install the RUU, so I can get back to original t-mobile ROMs and can use OTA to get from 2.73 to android 2.1,
or, somebody could send me a nandroid backup with 2.73 installed.
there might be another possibility: I extracted the rom.zip from the T-mobile 2.73 RUU and tried installing it via recovery... I got an error while opening the file (bad).
has anybody an idea how to solve my problem? pls don't tell me 'install custom roms' i heard that often enough and simply don't want to (though I might give it a try as soon as working sense 2.2 ROMs are ready)... i want to get back to official T-Mobile ROMs
thanks
JW 301 said:
Hi, i have a problem, I need some help solving it.
I have branded Hero (G2 Touch) on T-Mobile. Being tired of waiting for T-Mobile to release their branded 2.1, I followed some instruction on this board and installed generic 2.1. Sadly, the instruction used the RUU for directly installing 2.1 and I did this^^
When I try to install an old 1.5 RUU (t-mobile or generic) I always get the error 140 bootloader version.
I then tried the rooting method, now I managed to install the Amon Ra's Hero Recovery and that works quite good, as I now can use nandroid again (I couldn't do since the 2.73 update).
I managed to restore some backups that were on 1.76, and I had android 1.5 installed again, but still I couldn't install the 2.73 RUU, still getting the bootloader error.
Now, either somebody can tell me how to install the RUU, so I can get back to original t-mobile ROMs and can use OTA to get from 2.73 to android 2.1,
or, somebody could send me a nandroid backup with 2.73 installed.
there might be another possibility: I extracted the rom.zip from the T-mobile 2.73 RUU and tried installing it via recovery... I got an error while opening the file (bad).
has anybody an idea how to solve my problem? pls don't tell me 'install custom roms' i heard that often enough and simply don't want to (though I might give it a try as soon as working sense 2.2 ROMs are ready)... i want to get back to official T-Mobile ROMs
thanks
Click to expand...
Click to collapse
You'll need to use this guide (http://villainrom.co.uk/viewtopic.php?f=46&t=375) to make a goldcard, and downgrade using the HEROIMG.zip method (google it)
it doesn't work... I took the rom.zip, renamed it HEROIMG.zip and put it on my sdcard.
hboot finds it, loads it and then says "Main Version is older! Update Fail! Do you want to reboot device?"
what can I do now?
Have you checked to see if your goldcard has definitely worked?
it definitively is a goldcard, as I used it to install generic ROM on T-Mob device... still doesn't work now... but the problem is not that I try to install a ROM that's not meant for my device (thats what I understood goldcard does), but the problem seems to bee the bootloader-version the 2.1 RUU brought.
what can I do now?
Same thing happened t me a while back, I just re-tried every step from scratch and it worked the third time...!
what exactly did you do then? I tried so many things, at least I want to know, which steps to repeat over and over again
Just going to have a look at it for you, I am going through the processes as we speak so if I find a solution I will post back.
@JW 301 post the info in settings > About Phone
- Model number
- Firmware version
- Baseband version
- Kernel version
- Build numbr
- Software version
- Model number: HTC Hero
- Firmware version: 2.1-update1
- Baseband version 63.18.55.06PU_6.35.15.11
- Kernel version: 2.6.29-063c4d24 [email protected] #1
- Build number: 3.32.405.1 CL191507 release-keys
- Software version: 3.32.405.1
I want to get back to 2.73.111.26 (that is a T-Mobile ROM) so I can apply official T-Mobile OTA updates (by the way, I managed to get to VillainROM 12.0 yesterday, but went back. I want to use official ROMs...)
See new post here;
http://forum.xda-developers.com/showthread.php?p=7600524#post7600524
Had the same problem, I mean, EXACTLY the same.
This is what sorted it for me:
http://forum.xda-developers.com/showthread.php?t=726118
1. DOWNGRADE to 1.31 using this tutorial.
You do this by copying the RUU on your Goldcard and executing it.
2. Keep your Goldcard in, install this RUU.
Maybe other RUU files work too, I tried this one only. After successful install, check for updates on your phone, upgrade to 2.1-update1 and then again to FroYo!
It didnt work for me without step #1.
Edit: Instead of the RUU mentioned above under #2, you may install other Vodafone RUUs adapted to your country. Haven't tried them out though, but the UK Vodafone RUU seemed to work according to macnpaul.
this will give you vodaphone firmware with branded apps/etc? does the vodaphone froyo not have the CID check?
this gave me froyo with a boot screen from A1 and as far as I can tell no vodafone apps.
did you use the RUU_Legend_Vodafone_AT_GER_Mobilkom_1.31.177.3.. instead of the RUU mentioned in the tutorial or after downgrading to 1.31. as explained in the tutorial?
does this involve rooting ?
cos that tutorial seems to be for rooting :\
no, I don´t think this involves routing,
I think this changes the version number for you get no error 140 when loading an older RUU
This method does NOT involve rooting.
Do one step after the other. First you install the first ROM (non-Vodafone), then you install the second ROM and then the upgrade path to froyo is available to you. This avoids the [140] error.
did you use the RUU_Legend_Vodafone_AT_GER_Mobilkom_1.31.177.3.. instead of the RUU mentioned in the tutorial or after downgrading to 1.31. as explained in the tutorial?
Click to expand...
Click to collapse
After downgrading as explained in the tutorial.
RunSeven said:
This method does NOT involve rooting.
Do one step after the other. First you install the first ROM (non-Vodafone), then you install the second ROM and then the upgrade path to froyo is available to you. This avoids the [140] error.
After downgrading as explained in the tutorial.
Click to expand...
Click to collapse
HELP!!
I did exactly as described in the tutorial, i.e. downgraded my debranded Voadafone Legend from 2.05 to 1.31 and then installed the German 1.31 rom. No problems. I then used the phone to upgrade OTA to german vodafone 2.05, again no problem. Finally I then used OTA to get Froyo. The update downloaded OK and seemed to install OK. However, when the phone rebooted the touchscreen doesn't work and I can't unlock the phone to use it. I've tried rebooting several times by removing the battery and also clearing the cache and doing a factory reset - all to no avail. The phone works as a can call it but I can't answer it as tghe screen doesn't work.
As I can't get into the phone at all I can't even set debugging mode to downgrade back to something that works.
Can anybody help me?
Thanks in anicipation.
RunSeven said:
This method does NOT involve rooting.
Do one step after the other. First you install the first ROM (non-Vodafone), then you install the second ROM and then the upgrade path to froyo is available to you. This avoids the [140] error.
After downgrading as explained in the tutorial.
Click to expand...
Click to collapse
HELP!!
I did exactly as described in the tutorial, i.e. downgraded my debranded Voadafone Legend from 2.05 to 1.31 and then installed the German 1.31 rom. No problems. I then used the phone to upgrade OTA to german vodafone 2.05, again no problem. Finally I then used OTA to get Froyo. The update downloaded OK and seemed to install OK. However, when the phone rebooted the touchscreen doesn't work and I can't unlock the phone to use it. I've tried rebooting several times by removing the battery and also clearing the cache and doing a factory reset - all to no avail. The phone works as a can call it but I can't answer it as tghe screen doesn't work.
As I can't get into the phone at all I can't even set debugging mode to downgrade back to something that works.
Can anybody help me?
Thanks in anicipation.
Look here, this might help... others have experienced it too, it does not seem to relate to the update method.
RunSeven said:
Look here, this might help... others have experienced it too, it does not seem to relate to the update method.
Click to expand...
Click to collapse
Yeh, I had a look at that earlier. He managed to get into the phone though so he could make changes. Mine is just stuck solid on the lock screen. I did just notice that when it is starting up the language on the lock screen goes from german to english and then back to german. Weird.
Any other suggestions would be greatly appreciated
you can´t get into bootloader?
nikst4 said:
you can´t get into bootloader?
Click to expand...
Click to collapse
Yes I can. Will that help?
Another thing I tried that didn't help was renaming the German Froyo update file as update.zip and then installing from the SD though recovery. The full intallation seemed to happen but the screen still stays locked.
I also tried extracting firmware.zip from the update, renaming it to legeimg.zip and then puting it on the SD card. With a standard SD card fastboot says incorrect CID or something similar. With a goldcard it says no image or wrong image.
If it's of any use to anybody the Hboot version is on the phone 0.43.0001.
Probably a stupid question, I got a debranded vodafone legend with all the latests updates (apart from 2.2 obviously) and my hboot is 0.43.0001. But where can I check my rom version? Or is it 2.1 as shown under settings - software?
its something like 2.05.405.2 a little bit further down the menu.
Thanks that is what I ment. So I do need to downgrade first. Does anybody happen to have a mirror for the ruu file? Because shipped roms doesn't seem to work atm. All downloads get cut off.
Massive thanks to RunSeven
I followed the link to downgrade but used a vodafone UK rom (instead of the one mentioned) to put my Legend back to how it was before I debranded it. That allowed me to upgrade to FroYo using the OTA updates.
Obviously I now have the branding back, but I can live with that.
Worked for me!!
thanks !
Basically i'm after any advce please.
I debranded my Legend a few weeks ago (was UK Voda) its now on 2.03.405.3
I have an option ota to go to 2.05 then pressumably to froyo.
Do i give it a go, has anybody been able to get debranded to froyo via ota.
Or do i re-create a goldcard and go back to Voda 1.32 which i have downloaded ready.
If i stick with debranded and try froyo will it be any harder to go back to branded Vodafone after?
Or option 3 should i stick where i am and wait for a 2.2 RUU?
mancrunch said:
If i stick with debranded and try froyo will it be any harder to go back to branded Vodafone after?
Click to expand...
Click to collapse
No, it won't be harder, I think. Probably the update to Froyo will fail with debranded rom, that is all.
mancrunch said:
Or option 3 should i stick where i am and wait for a 2.2 RUU?
Click to expand...
Click to collapse
Don't know if that will ever arrive.
Hi
I've been hammering at this problem for weeks now and its really frustrating. I'm hoping someone can help me out here.
I cant get my phone to update to Froyo. I'm dying to see if the update wil fix my missing wifi issue that I picked up with the last update.
Currently I'm at:
Firmware version: 2.1-update1
Baseband version: 47.26.35.04u_7.05.35.26L
Kernel version: 2.6.v29-e3993620 htc-kernel(at)and18-2 #1
Build number: 2.06.709.3 CL193617 release-keys
Software number 2.06.709.3
The phone is unbranded, bought in China. I'm not sure if it was tampered with.
My phone picks up the OTA update:
OTA_Legend_Froyo_s_hTC_Asia_TW_3.15.709.3-2.06.709.3_release_160364d6o5a2er5k3kbifl
this fails on install, red triangle at about 25%
Tried doing it manually:
renamed above file to update.zip and copied to root of SD card
In HBOOT there is an error something about "legedimg" missing flashes up
Selecting recovery mode gets me a red triangle
pressed (power+vol up)
gets me into system recovery, there is a warning at the bottom "Can't open >cache >recovery>command
selected apply sdcard:update.zip, it works for a little while
get a bunch of stuff about "ro.cid" and and finally "HTC__621". "error in >sdcard >update.zip" (status 7)
Also fails.
Can anyone tell me what's going on here? HTC support has been useless. I'm now really stumped. Do I need a goldcard?
Hi! Yes, you need a goldcard because of the different CID you have and the update.
You may look for an update for your CID.
Why not root it while you're at it?
Thanks!
What is a CID? Is this not the correct update for my phone?
Are you suggesting that if I find the correct update I wont need goldcard or root?Where might I look for an update that matches my CID?
Since I'm on a mac, and dont have easy access to a PC rooting and goldcarding is a bit of a pain...
CID is Carrier ID, a number that locks your phone to carrier-specific firmware...
And yes, you need an update for your CID, then you don't need GC...
thanks. so do I have this straight:
1. My phone is locked to take only carrier specific firmware (even though its not actually sim-locked since I can use any sim I want) Sooo... "debranding" wont actually help
2. an update with the correct CID would work - though I dont know which one I need.
3. a goldcard would let me install the latest update via update.zip despite the CID issue
When I spoke to HTC support they said something about my phone originally belonging to Vodafone Germany. It was strange since I definitely have the chinese version loaded. I could try loading the vodafone germany update but then wont my phone become sim-locked again?
Am I getting this right? Thanks you have been a great help!
1. SIM lock and CID lock are two different things...
2. Yes, if the HTC said Voda Germandy, they're probably right...I presume you have purchased it from someone who used it before?
3. Of this I'm not sure, but It wil definitely help you root your Phone...
If you don't want to root, you can try to find an RUU upgrade - that's and app that will upgrade your phone from PC - try www.shipped-roms.com. But again, you need one that matches your CID.
edit: If you flash the RUU, rooting will be harder
Dr.Romca said:
1. SIM lock and CID lock are two different things...
2. Yes, if the HTC said Voda Germandy, they're probably right...I presume you have purchased it from someone who used it before?
Click to expand...
Click to collapse
Eemm, no. It was "new". They probably did something dodgy to keep the price down. Somehow, despite the CID issue, they were able to install the chinese firmware. It doesn't make much sense.
Dr.Romca said:
3. Of this I'm not sure, but It wil definitely help you root your Phone...
If you don't want to root, you can try to find an RUU upgrade - that's and app that will upgrade your phone from PC - try www.shipped-roms.com. But again, you need one that matches your CID.
Click to expand...
Click to collapse
As far as I can see the latest for Vodafone Germany is "RUU_Legend_Vodafone_AT_GER_Mobilkom_1.31.177.3_Radio_47.26.35.04_7.05.35.26L_release_126862_signed.exe"
I dont think this is actually Froyo?
That might mean that a goldcard is the only option. I take it the goldcard would essentially allow me to bypass the CID check and install whatever update I wanted?
I tried to install the latest vodafone version via update.zip on the SDcard, no luck, "assert failed"... status 7...
Sorted!
Well, I managed to sort mine out and upgrade to Froyo. And I got my WIFI back too!
Very simple...
1. Create Goldcard: Droid Den - Android Guide: How To Create a Gold Card
2. Install RUU (Legend Froyo WWE): Index of /shipped/Legend/
Worked a treat and was actually very simple using the goldcard helper app they recommend on that post. You need access to PC.
I tried updating using update.zip through recovery but that didnt work.
Phone is now working 100%.
I suppose issues might come up when I try to update next time OTA (if there is another OTA for legend), but worse case scenario I will have to use another RUU.
glad it worked out for you... can't imagine going trhough the stress
that's why im waiting for the Official OTA
Good it worked
@Qksi1ver: why are you waiting for OTA?If you root now, you have a shot at S-OFF, If you update your HBOOT, you wont be able to S-OFF...just sayin...
Sent from my HTC Legend using XDA App
Hi,
I try to downgrade from Mango to Nodo but I have a problem:
When running restore.bat the batch file keeps saying that I dont have zune 4.8 installed ... but I did .... I de-installed and re-installed again ... but no luck ...
Suggestions ?
btw I used:
http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11
I think I have the same problem. I have a US Verizon HTC Trophy updated now to Mango 7720 and I'm looking to restore it back to NoDo.
I used the method posted on windowsphonehacker (How to get Mango Beta 2 for non-developers) to update my phone 7712.
It made a backup for me which is in my C drive folder.
Then I recently updated my phone from 7712 to 7720 with the Mango RTM flash that was just released.
So I wanted to see if I could restore back to Nodo and I'm running into problems.
With Zune 4.8 installed, I ran the restore.bat file from the windowsphonehacker post and it said that the version of the windows phone update tool did not match Zune. So I unintalled Zune 4.8, re installed the original Zune 4.7 and ran the restore.bat again. This time, it runs but says "No restore point found."
Anyone have any ideas? If not, is there a stable Verizon US Nodo ROM I can flash to my phone?
Thanks.
Step away from the phone...
I have a similar problem. I successfully updated my Trophy to the first Mango beta, but I'm having a slew of issues getting it up to the latest (final?) Mango release. I can't seem to restore back to anything below 7401... and I'm afraid I won't get the official release in September. I'm generally down a rabbit hole and would just prefer to flash and get back to 7932 as if none of this ever happened.
Any advice for a noob would be appreciated.
thx
Hi, must turn off ur phone n switch to 3 colour page
downgrade problem
Yeah, I did that. It wouldn't flash the phone correctly.... maybe I had the wrong ROM. If anyone can point me to the Verizon Trophy 7392 US ROM I would appreciate it.
666todd666 said:
Yeah, I did that. It wouldn't flash the phone correctly.... maybe I had the wrong ROM. If anyone can point me to the Verizon Trophy 7392 US ROM I would appreciate it.
Click to expand...
Click to collapse
My understanding is that you will not be able to accomplish your task. The multi-color screen on the Verizon Trophy does not allow loading of ROMs since it cannot be unlock. Unless I am misunderstanding this. Shouldn't you be able to restore to a previous point in the Zune software?
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?