Well, I bought a new SD card, the problem is that I can't use it. In any custom ROM, the Sdcard, when mounted via USB appears in "safe mode" and I can't write/delete on it. If I use it via Card reader it works well.
So I back to official ELISA rom and the USB mounting works good, and with that I can write and delete files in SD via USB mouting on PC. So back up to MIUI and the problem is on again. Try Oxygen and same thing... With CWM 4 and 5 ... Don't no what to do...
Regards
Related
So, i had a rooted mytouch with a custom rom.. Pretty familiar with the android OS. LOVING my nexus, except for this stupid problem. (its no my SD card btw, works fine in my girlfriends droid)
Anyways, i cannot mount my SD card when i am plugged in my computer... I am out of ideas. Anybody have the same problem?
what happens when you try to mount it? please provide more info!
i have the same problem, the only time where it'll let me mount my SD Card is when i put it in developers mode.
If I recall correctly from the user guide, you have to pull down the notification area on the phone and tell it to connect via USB. After this you should be able to mount the SD card. Again, if I recall right.
I wish i can tell you more but.. thats it.
You connect the phone via USB. Pull down the notification menu and there is NOTHING there. I cant try to mount it, i don't even have the option to mount it.
Should i record a video of it?
It should at least recognize that it is connected through USB, it does not. I put my SD card in another phone, hooked it up via usb, transfered all my stuff, then put the SD card back into my phone and EVERYTHING works, it reads it fine. I just cant mount my card from my notification menu. Its empty.
*edit* I have also installed the latest USB drivers from the SDK update, still cannot mount my SD card... I am starting to think the problem is deeper for some reason.
I think I'm having the same issue as the op. I downloaded the latest driver and the computer recognize my Nexus One, but oddly the drive the SD card is suppose to show up in is saying I have no SD card. Whenever I try to open up the F Drive(Nexus One SD card) it tells me to no media. Not sure if I'm explaining good enough.
piggie916 said:
I wish i can tell you more but.. thats it.
You connect the phone via USB. Pull down the notification menu and there is NOTHING there. I cant try to mount it, i don't even have the option to mount it.
Should i record a video of it?
It should at least recognize that it is connected through USB, it does not. I put my SD card in another phone, hooked it up via usb, transfered all my stuff, then put the SD card back into my phone and EVERYTHING works, it reads it fine. I just cant mount my card from my notification menu. Its empty.
*edit* I have also installed the latest USB drivers from the SDK update, still cannot mount my SD card... I am starting to think the problem is deeper for some reason.
Click to expand...
Click to collapse
are you connecting it directly into the computer? if not try doing so. If you are connecting it to the computer try a different USB port.
Hello,
Today I've flashed MAGLDR+CWM and then flashed Android. All worked perfectly until I decided to flash another build and tried to copy the ZIP package to my SD card, which I couldn't. When booting to MAGLDR usb mass storage option the computer "sees" the SD, but as soon as file copy starts the computer "loses" the SD and MAGLDR freezes (had to take battery out). When I boot the build I flashed, connect USB cable and select USB Mass storage, the computer sees the drive but claims there's no disk in it. What is wrong here?
TIA
Don't use magldr mass storage, it has bugs. Boot into cwm, go to mounts and storage and select mount usb storage. Works perfectly.
MAGDLR work for me... CWM not...
Anyway, the best is to just slot your SD in a card reader.
NB: If you're under Android, do not forget to "unmount" the SD before removing it.
[SOLVED][Q] Can't copy files to SD
It now looks like the problem is PC-related, as I was able to successfully copy files to SD from another computer. Thank you for your help.
Help.
Half way through a transfer through USB onto the external SD card,I got an IO error. Now the U8800 wont detect the SD card at all through any file manager or through Clock Work Recovery.
I've tried another SD card with no luck,
Ideas?
It is not even being detected anymore? You cannot format it, via phone or via computer? It should still show up in the storage-settings.
I suggest reapplying the ROM-update, so you can check if the problem was related to your ROM. If no other SD-card is being detected then, your device clearly is faulty.
Hi Guys,
Ik played with my Htc HD2, and wanted to install android on it (not the first time, installed more than 10 roms before)
But this time it went bad.
I dont know what i did but my pc doesnt recognize my htc hd2, so i cant acces my sd storage, so that means i cant put an rom on my sd card so that i cant install a rom.
i can still acces the magdlr menu and also the clockworkmod menu. but when i go to the mounts and storage menu in clockworkdmod and want to mount usb storage it gives me this error
E:Unable to write to ums lunfile (No such file or directory)
What can i do. pleaseeeee i have been searching for a solutions for 2 full days.
If you're just looking to get the rom.zip onto your sd card, and don't need to flash a new recovery or anything, you could just install dropbox on your phone and on your computer. Download the rom on your computer, and the put it in your dropbox folder, then download the rom from dropbox on your phone.
I've had to do this to get roms onto my sd card for quite a while, since my usb port on my phone is broken, it works fine, just takes a little longer than transferring via usb.
huggs said:
If you're just looking to get the rom.zip onto your sd card, and don't need to flash a new recovery or anything, you could just install dropbox on your phone and on your computer. Download the rom on your computer, and the put it in your dropbox folder, then download the rom from dropbox on your phone.
I've had to do this to get roms onto my sd card for quite a while, since my usb port on my phone is broken, it works fine, just takes a little longer than transferring via usb.
Click to expand...
Click to collapse
yeah but i cant get the rom on my sd card because i have no rom, i only have magldr and clockworkmod recovery on my phone, and when i choose mass storage in the magldr menu. my pc doesnt recognize the phone.
what is problem here you thing, my hd2, the micro sd card or the windows 7?
Not knowing anything about it, I would have to say it could be any one of the three things you mentioned is wrong. Or it could be your USB cable.
Maybe you could try another cable, try plugging into a different USB pot on your computer, or better yet, try a different computer if available.
Isn't there also a way in CWM to connect your comp to your SD card? I've always hears that transfering files to your card via USB in MAGLDR was unreliable and could corrupt files anyway. Maybe you could put your card in a friend's phone and plug that phone into your computer and transfer the file.
Iirc thats linked to the sd card, so it may be faulty or just need reformatting
I have had to follow this proccess a few times when I've had issues with my sd and I have the 4th new csrd in the phone after about 20 months
First I would check out the sd card, and delete all partitions on it - format as primary partition and fat 32 use EASEUS free version
Then task 29 the phone
Then I would reinsert the sd card and then follow the instructions running magldr and cwm before flashing your rom again
the thread for the rom should provide help if not try the CoreDroid rom V1.7 the thead is very active with lots of online support
http://forum.xda-developers.com/showthread.php?t=926507
I would have a look
Ok, I have CWM and I can access it. I cannot read from my External SD Card to install a rom. I can access my Internal SD but I do not have a rom in there.
I cannot boot into the previous ROM since I erased everything and when restarting I get boot loops. I need the tablet to get back to work tomorrow.
Any help would be greatly apreciated.
I have a ROM downloaded in my PC but when I connect the A500 to the PC (via USB) I cannot mount it to copy it there and flash.
HELP please!!!
What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.
shin lucifer said:
What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.
Click to expand...
Click to collapse
I was able to put the SD Card from my phone and flashed the new rom. The tablet is sill not recognizing the SD Card though. I put it on my PC and it wont detect it (cant format it that way). I put it on my printer and I am able to read from it but I cannot format it. It tells me that is right protected.
I need to find another way of formatting it.
Thanks for your help.
I suggest you get a new sd card. Clearly the one you're trying to use is not working.
I'm not even sure if you can "write protect" an SD. Maybe something on the micro SD adapter perhaps (switch)? Or an option in Windows Explorer (check the sd's "properties". If it says "write protected", then turn it off.