1st post here, did look around to see if i could find an answer first. Has anyone utilized the TRansformer Dock (with its USB Port) to connect to a 3G or 4G network. I'm in Canada and might pick up a USB Data Stick if I know that I'd be able to use it for those times that wifi is unavailable.
I've tried with a Huawei usb stick provided by Vodafone but as expected it doesn't work.
On the other hand you can get a wifi 3G modem, so that you share the 3G connection via wifi. This works just great.
I use a wifi modem all day in the office, and use my EVO as a wifi hotspot when I am mobile. Both work great.
http://androidforums.com/evo-3d-all...t-android-tether-doesnt-work.html#post3029214
Using the above app and having root on the phone, you can wifi tether asus transformer that is not rooted. There are a few errors, but all and all it does work.
It depends on the phone's hotspot. When I first got my TF and non root, I tether to my N1 jsut fine. The TF just see my N1's hot spot as another wifi AP.
curious.. why would you want to tether your ASUS TF101?
the TF101 only has WIFI unless yuo habve the TF101G with the simcard slot.
the only time i could see you tethering your TF101 is if you had a mobile data service plan on it and you coudl share that with other devices and laptops.
if you just have the standard TF101 with wifi only and you tether it that seems like waste sharing the Wifi connection that other devices could easily just connect to anyways with out connecting through the TF101.
now since i have a samsung vibrant from Tmobile i do enable tethering on my phone and thne i connect my TF101 to my Samsung vibrant so that i can use it on the road but i jst dont see why anyone would want to enable tethering on a wifi only device.
i do notice that in wireless setup it has the option to enable hotspot but that makes no sense. why would i want to enable people to connect to my wifi only device that i am already getting wifi from somewhere else?
seems like an option that was meant to be on the TF101G but they left it enabled on the standard TF101
If I recall correctly, tethering is built in to Froyo and later as long as your carrier hasn't disabled it in their build for your phone. Or are you talking about something different?
I have a Nexus 1 also, tethering is not a problem with it because it simply acts as a regular wifi hotspot, the problem is if you have a phone that will only send out an adhoc wifi spot (like a symbian phone for example). The non-rooted transformer and other Android devices can not pick up an adhoc connection, unlike laptops and iOS devices which have no problem with them.
Add me to the don't understand list. I tether all sorts of device including unrooted transformer, iPad2, etc. to my rooted Evo.
my nexus tethers without root
This is an issue? My TF works perfectly with my Vision/DesireZ/G2 no problem.
What I'd REALLY like to see is a working USB tether. It seems dumb that I have to setup a Wifi hotspot then plug my phone into my TF in order to charge (since using the hotspot gobbles battery)
Does anyone use one? Any ideas what one to use? Any suggestions?
Don't answer all at once!
Something like this will do. It broadcasts as WiFi so your Nexus will see it yet in essence it's a 3G dongle. Not sure about the price plans or whats available in your country of choice but thought I'd show you whats available.
Manc.
Questions go in the Q&A section
can i use my huwavi ui53 3g dongle with google nexus 7 tab to connect internet?
hi
can i use my huwavi ui53 3g dongle with google nexus 7 tab to connect internet?
becoz i'm planning to buy this tab..but my area has not wifi...
pls help me...
One could get a MiFi router, where it's basically a 3G/4G dongle with WiFi capabilities in-box. Or get a WiFi 3G Router that is an adapter for existing 3G/4G dongles, like this:
http://usb3gvn.com/router-wifi-3g/tp-link-tl-wr703n.html
750k VND = 36.50 CAD/[moreorless] USD
I'm also interested to know if Android's USB host could support an internet stick...
dknotty said:
Does anyone use one? Any ideas what one to use? Any suggestions?
Click to expand...
Click to collapse
I tether from my phone. I would imaging those Clear wireless internet hotspot devices would do the job as well.
Hello everyone!
So where I am living I cannot get reliable internet service and currently have Hughesnet (satellite isp) that I want to stray from. I have picked up a prepaid true unlimited data plan from Metropcs and want to use it as my default isp as the speeds are astronomical compared to Hughesnet. They are of course limited in usage for tethering and I would have to use a masking application and have chosen Clockworkmod Tether. What I want to do is run a USB dongle to my router (ASUS RT-N56U), connected to my phone (SAMSUNG-SM-G900A), running Android 5.0 with Clockworkmod Tether. Is this possible to do as the router doesn't have a sister application with the phone i.e Pdanet+ needs a windows application running to work?
All feedback is welcome!
So I found a video that kind of explains how to do so but I still have questions. With the process he is demonstrating the phone is using the wifi hotspot option to broadcast signal to the router. My question is.. with all the tether masking apps (PDAnet, FoxFi, Clockwork) you need to connect via USB to work. How would I get around this?
https://www.youtube.com/watch?v=4ykqFgJi-ZE
II would like to USB tether my PH-1 to my router using an ethernet to USB adapter. To use USB tether you apparently need a powered USB connection. Is there a way around this so I can tether to an ethernet adapter?
I'm not sure what you mean by tether, but if you're just trying to get an Ethernet connection for your PH-1, I got a simple, unpowered USB-C to Ethernet adapter off scamazon for about $10. It works great. Much faster D/Ls than any wifi.
AyUaxe said:
I'm not sure what you mean by tether, but if you're just trying to get an Ethernet connection for your PH-1, I got a simple, unpowered USB-C to Ethernet adapter off scamazon for about $10. It works great. Much faster D/Ls than any wifi.
Click to expand...
Click to collapse
AyUaxa, can you tell be the exact procedure you use to connect your USB-C ethernet adapter? It sounds like you use a different method than Hotspot & Tethering -> USB Tethering.
Garvinr said:
AyUaxa, can you tell be the exact procedure you use to connect your USB-C ethernet adapter? It sounds like you use a different method than Hotspot & Tethering -> USB Tethering.
Click to expand...
Click to collapse
1. buy one of these, using scamazon smile to benefit a charity: https://www.amazon.com/gp/aw/d/B00M77HMU0/ref=sspa_mw_detail_5?ie=UTF8&psc=1&pldnSite=1&th=1
2. plug dongle's male USB C into PH1s female USB C. maybe carry them around in the same pocket for a while, go for coffee or dinner or something, so they get to know each other first. if either isn't cisgendered, make appropriate apologies.
3. plug a good ethernet cable into an open port on your router and the other end into the female ethernet port on the dongle. at this point, don't worry about the niceties--routers are easy and the dongle's already committed.
4. Use pulldown on PH1 to turn off wifi and 4G to confirm internet connection through ethernet. There should be a <--> icon in the status bar.
5. Surf internet at high, wired speed until battery dies. I don't think it's necessary to turn off wifi and 4G to get the ethernet connection to work, but since battery life is an issue, unless you've got a USB C splitter that allows you to charge while connected to the dongle, I turn those off to conserve battery.
QED!
AyUaxe said:
I'm not sure what you mean by tether
Click to expand...
Click to collapse
I am pretty sure the OP wants to do the opposite of what you are suggesting... Tethering usually means using the data connection of the phone to provide the internet access to the other device(s). Typically, this is done by setting up the phone as a WiFi hotspot, but the idea here is to use the wired Ethernet connection to the router instead, so all devices connecting to the router would use the internet connection shared by the phone.
kt-Froggy said:
I am pretty sure the OP wants to do the opposite of what you are suggesting... Tethering usually means using the data connection of the phone to provide the internet access to the other device(s). Typically, this is done by setting up the phone as a WiFi hotspot, but the idea here is to use the wired Ethernet connection to the router instead, so all devices connecting to the router would use the internet connection shared by the phone.
Click to expand...
Click to collapse
kt-Froggy is correct, I want to share my phone internet connection with my router. Thanks
You figure out a way to hook up to router
Wanting to do the same thing, and that is, provide internet service to router through cell phone.
Any suggestions on how it may be done
Garvinr said:
kt-Froggy is correct, I want to share my phone internet connection with my router. Thanks
Click to expand...
Click to collapse
gramicko said:
Wanting to do the same thing, and that is, provide internet service to router through cell phone.
Any suggestions on how it may be done
Click to expand...
Click to collapse
A USB-c to ethernet cable... Then plugged into the incoming port on the router...
Use my mobile data plan for home
Since I have true unlimited data plan with carrier I plan to use Essential exclusively as a hotspot phone to provide internet through a router AP for the house. Looking for an adapter to hardwire to router -act as access point- and that the phone is charged while in use. I've tested through wifi and it works through an Asus router, but I want to see if I get better speed if hardwire to router.
Thanks for the information I'll look into it.
You might also consider getting a USB splitter that allows your ph-1 to charge while USB Ethernet tethering.
I did this for a period of time with a different phone and having it plugged in continuously for a few months, it wrecked the battery and not sure if it was related, but the screen got all funky.
My alternate plan to remedy that was to use my phone's wifi hotspot, installed Open-WRT on a spare rPi I had laying around (maybe you can install it on your router if you check out their compatibility list?) and then I set up a Tasker event to automatically turn on a WiFi-enabled plug when my phone got down to 20% battery.
I suppose you could do the wired Ethernet adapter with a USB splitter and a WiFi-enabled smartplug if you're die-hard about having it wired.
I might also recommend putting your router in bridge mode (or at least disable the DHCP server) so your phone is giving out IP addresses, so you don't have a bunch of extra translation. LTE and WiFi have enough latency, adding another layer of NAT probably won't help if you're doing anything time-sensitive like gaming.
Just my 2¢.
Good luck!
(Might I inquire what service you're using that provides unlimited data? I was grandfathered in to an old Verizon contract with true unlimited data but unfortunately the contract owner was swindled by a sales rep to "upgrade to a new plan that would save [you] $15 a month" ? so I'm in the market for a new contract (or even prepaid if such a data option exists. I'm currently testing Google Fi, but the PH-1, being a compatible phone, not "Designed for Fi" I'm stuck on TMO which has almost no service in my area so unfortunately I don't think I'm going to be able to stick with Fi))
I have "Sprint Unlimited Family" supposedly true unlimited until 50gigs then may be throttled down based on congestion of network.
Tried Asus RT-AC68U router as AP through USB 3.0 cable and it worked perfectly. Need to look into tasker to see if it works so phone is not always charging
jake5253 said:
You might also consider getting a USB splitter that allows your ph-1 to charge while USB Ethernet tethering.
I did this for a period of time with a different phone and having it plugged in continuously for a few months, it wrecked the battery and not sure if it was related, but the screen got all funky.
My alternate plan to remedy that was to use my phone's wifi hotspot, installed Open-WRT on a spare rPi I had laying around (maybe you can install it on your router if you check out their compatibility list?) and then I set up a Tasker event to automatically turn on a WiFi-enabled plug when my phone got down to 20% battery.
I suppose you could do the wired Ethernet adapter with a USB splitter and a WiFi-enabled smartplug if you're die-hard about having it wired.
I might also recommend putting your router in bridge mode (or at least disable the DHCP server) so your phone is giving out IP addresses, so you don't have a bunch of extra translation. LTE and WiFi have enough latency, adding another layer of NAT probably won't help if you're doing anything time-sensitive like gaming.
Just my 2¢.
Good luck!
(Might I inquire what service you're using that provides unlimited data? I was grandfathered in to an old Verizon contract with true unlimited data but unfortunately the contract owner was swindled by a sales rep to "upgrade to a new plan that would save [you] $15 a month" so I'm in the market for a new contract (or even prepaid if such a data option exists. I'm currently testing Google Fi, but the PH-1, being a compatible phone, not "Designed for Fi" I'm stuck on TMO which has almost no service in my area so unfortunately I don't think I'm going to be able to stick with Fi))
Click to expand...
Click to collapse
Garvinr said:
II would like to USB tether my PH-1 to my router using an ethernet to USB adapter. To use USB tether you apparently need a powered USB connection. Is there a way around this so I can tether to an ethernet adapter?
Click to expand...
Click to collapse
Since some time there is an ethernet therthering option on my note 10+ 5G.
I use it to as an uplink on my router.
I initialy used an old usb A ethernet dongle with an adapter.
I recenly got some poe to usb c pd adapter from aliexpress, about 80$ a pice.
This way my phone gets power and can sharw its ethernet connection over just one cable.
Because my router is just a vm, and all ports to it are just v-lans i can easy configure 1 ore more of the ports of my poe switch to be wan.
Side note: i use openmptcprouter for wan bonding, i get near 100mb/s dl and ul in the country side, just using 3 lte modems and my phone in ethernet therthering mode.