Database Users

Finding out the name of patch automatically sent to phone?

Hi everyone,
I have just purchased a Vodafone-branded Magic/Sapphire. Android prompts me to install an 4.2 MB large update called "Android Update 1.5" with this message:
Please install this update from Google. It contains a security fix.
Now, what really confuses me is that Android 1.5 is already installed - at least according to the settings menu, where this information is shown:
Model number: HTC Magic
Firmware version: 1.5
Kernel version: 2.6.27-00392-g8312baf [email protected] #72
Build number: CRB17
Accordingly, I have three questions:
The phone says that the update as already been downloaded (most likely in the background), but not yet installed. Is it possible, using a terminal program/shell-prompt, to browse the phone's filesystem and check the filename of the update before you install it on an un-rooted phone? If so, where do I look for the update package?
Why does the phone want to install an Android 1.5-update? According to the phone Android 1.5 is already installed?
Can someone please tell me what the 4.2 MB update does? I have been googling for Android OTA Update "4.2 MB", but it seems that nothing is known about this update anywhere (there are, however, other updates within the 4 MB-range but none of them are precisely 4.2 MB in size).
I'd very much appreciate any help to sort this out (moderators, I hope I havn't created this thread in the wrong subforum; if I have, I apologize).

1. Run ddms/logcat to see the URL of the update.
2. 1.5 is the OS version.
3. It's most probably a security patch (of 1.5).

Its CRC1 and already "leaked"

Amon_RA said:
1. Run ddms/logcat to see the URL of the update.
Click to expand...
Click to collapse
Thank you. I'll do it as soon as the phone is fully charged again (as the manual says the battery will perform at its best after completing a few full charge/recharge cycles, I don't want to disturb it - pseudo-science, I know ).
Is the ddms/logcat stored locally on the Magic/Sapphire by default, or is it just part of the SDK-package?

maxisma said:
Its CRC1 and already "leaked"
Click to expand...
Click to collapse
Woah, one step at a time mister . I'm a total Android-newbie (although trying to catch up browsing various forums).
What is "CRC1"?
Will installing this patch prevent me to root the phone at some later stage?
Is there a proper changelog available somewhere?

Focusyn said:
Woah, one step at a time mister . I'm a total Android-newbie (although trying to catch up browsing various forums).
What is "CRC1"?
Will installing this patch prevent me to root the phone at some later stage?
Is there a proper changelog available somewhere?
Click to expand...
Click to collapse
It's security updates. I'd recommend getting the update from here (xda) rather than attempting to install it from the carrier.

Is anyone else getting a 4.0 OTA notification?

This may be a known issue but my wife's (non-rooted, completely stock) A500 has been getting a 4.0 OTA notification since yesterday. It says it's invalid, after downloading it, so I ASSUME it's not actually for this device but is that the case? If it is for the A500, do I need to do a factory reset to get it to update?
Thanks, and Merry Christmas!

What version is it running currently? 7.014.02
I have not seen anything since the 7.014.01/02 releases a few days back.
It would be nice to see Acer taking the lead on releases but I will believe it when it happens. The. 02 release did have a new to me update screen when it installed....
Wowsher

I think I know what one of the issues is- This must have been some really old stock (bestbuy.com) because it's running 3.0.1 and the kernal version is 26.36.3-00001-g9b3ce2b. Is it possible that it's somehow "skipping" the OTA updates in the correct order (or maybe they aren't available OTA anymore?) and thus giving me the "invalid" message?

yep would not surprise me at all... you should be able to download from a thread in the rom area a thread by vache has links to almost all of them.
You should probably change the thread title if you can.
Wowsher

There have been others with similar issues.Seems like acer did not and is not pushing the updates to some devices.
I would first call acer if you. Not likely to help but would atleast let them know they have issue.
For a right now fix.
Get iconiaroot. Root tablet.
Get acer recovery installer. Install custom recovery.
Look on forums for a stock 3.1 or 3.2 rom.
You can get a ore rooted rom if you wish but would kill all updates in future.
There are lots of information in the dev forums on step by step instructions and downloads.
Be careful fallow instructions.
Good luck.

The 4.0.xxxx update, is an update for UI. It should come in 2 notifications for stock tablets.
The first, is a preparatory update. The second, is the actual update.
Note, if you have a rooted tab, as some people can tell, it is not advisable to take any OTA update from acer.
In the forum, if you want to take the update, there is a thread which has rooted versions of these updates.

[Q] OTA update not working

Unrooted my tab and trying to get it back to the latest official version, but I'm having loads of trouble. Please help. Thanks!
My model number is A500, Android version is 3.0.1, kernel version is 2.6.36.3-00001-g44a8bac and build number is Acer_A500_1.145.01_COM_GEN2
This is the tab that best buy had on sale a few weeks/months on sale. Only 8GB of on board storage.
I have found threads with official updates, but don't know which is safe to install. They are all the same version but have different build numbers so I don't know which build number corresponds with my tab
I think I know the answer to this already, but can I jump from 3.0.1 to 3.2.1?
Anyways please help. I do appreciate it.
Thanks!
EDIT: 99 views and no replys? Do you guys not know the answer or are just being jerky? This is seriously my first post let alone question on the acer threads. I usually get things pretty easily, but I am having trouble on this one so it's not like I'm being lazy or asking a stupid question. Can someone help either by providing some answers or let me they don't know how to fix this??
Thanks
EDIT 2: Close mods

Not sure if you're still with us -
interested in knowing why you have not rec'd any OTA before now -unless you've been rooted from the start like i was when i got mine!!!
you also have to be stock, as in factory stock! the update checks a whole lotta stuff before it will install . If the system doesnt stack up the update will fail. So if you have deleted or frozen bloatware apps they will need to be restored, along with modded build props etc. factory data reset and full wipe fixes that problem, but Most people want to keep their data if they can and isn't an option. The update itself should leave everything in place. Mine did.
u need a Gen_2 build. I'm not familiar with your build number or upgrade path for 1.145, but you should receive an OTA for 3.1, 3.2 and the latest 2 for 3.2.1.
if u just wanna install one of the updated custom stock roms with root or cwm, you should be fine with any build and yes you can go straight to 3.2.1 from 3.0.1, but no OTA with these roms

ACis0014 said:
Unrooted my tab and trying to get it back to the latest official version, but I'm having loads of trouble. Please help. Thanks!
My model number is A500, Android version is 3.0.1, kernel version is 2.6.36.3-00001-g44a8bac and build number is Acer_A500_1.145.01_COM_GEN2
This is the tab that best buy had on sale a few weeks/months on sale. Only 8GB of on board storage.
I have found threads with official updates, but don't know which is safe to install. They are all the same version but have different build numbers so I don't know which build number corresponds with my tab
I think I know the answer to this already, but can I jump from 3.0.1 to 3.2.1?
Anyways please help. I do appreciate it.
Thanks!
EDIT: 99 views and no replys? Do you guys not know the answer or are just being jerky? This is seriously my first post let alone question on the acer threads. I usually get things pretty easily, but I am having trouble on this one so it's not like I'm being lazy or asking a stupid question. Can someone help either by providing some answers or let me they don't know how to fix this??
Thanks
EDIT 2: Close mods
Click to expand...
Click to collapse
This is a known issue and too many reasons to list. But, basically you are not 100% or it thinks that (checksums different) etc.
So, just flash directly to 3.2.1 GEN2

Mods please close. I was able to fix the issue
I was rooted and had to flash to 3.0.1 or 3.1 before unrooting with the iconia apk. Then I used the acer recovery tool to flash stock recovery. But after flashing stock recovery and unrooting I couldn't get any OTA updates. I re-read some the posts and manually updated to 3.2 after decrypting the zip. After updating I checked for new OTA updates and sure enough found both. Now I'm back to stock 3.2.1. Patiently waiting for ICS

Glad you got it working.

[Q] OTA Update Issue

Hi to all,
i've buy this tablet used from a collegue of my friend.
He give it to me with a modify rom with 3.1 firmware (if i don't wrong, tha name of the rom are "Picasso-ROM" but i'm not sure about it).
I wanna restore the original firmware on it to take the last firmware 3.2.1 (Acer_A500_7.014.14_COM_GEN1) but I can not seem to update to that version of the tablet !
At the moment with the EUUs_SBK_Acer_A500_1.016.05_COM_GEN1 i was able to restore the original Acer recovery (lost with old custom rom) and with OTA now i've the follow update : "A500_7.006.01_COM_GEN1" but the version of Android still 3.2 !
I would not like that when ICS comes out I will not be able to update !
How can i force it ? There is a link where i can download the OTA update ?
Thanks for your support !!

There is no way to force OTA unfortunately - if you've managed to receive the OTA 3.2 then there should be no reason you shouldn't receive 3.2.1 just give it a few days more, some here have had to wait 2-3 weeks for it so I wouldn't panic just yet

Hi,
Did you receive the 3.2.1 yet? I had the same problem yesterday...
tks.
LainX said:
Hi to all,
i've buy this tablet used from a collegue of my friend.
He give it to me with a modify rom with 3.1 firmware (if i don't wrong, tha name of the rom are "Picasso-ROM" but i'm not sure about it).
I wanna restore the original firmware on it to take the last firmware 3.2.1 (Acer_A500_7.014.14_COM_GEN1) but I can not seem to update to that version of the tablet !
At the moment with the EUUs_SBK_Acer_A500_1.016.05_COM_GEN1 i was able to restore the original Acer recovery (lost with old custom rom) and with OTA now i've the follow update : "A500_7.006.01_COM_GEN1" but the version of Android still 3.2 !
I would not like that when ICS comes out I will not be able to update !
How can i force it ? There is a link where i can download the OTA update ?
Thanks for your support !!
Click to expand...
Click to collapse

I recently reverted from the leaked ICS 4.0.3 using ATX to flash back to stock 3.0.1. Once I did that, I tried to OTA update to 3.2, without success. So I downloaded the 3.2 update from Vache's thread, renamed it update.zip and threw it on my sdcard. Rebooted into stock recovery and updated. Once I did that, I went into settings and checked for OTA update, and it worked. So I had the same problem with OTA updates, but running 3.0.1. Perhaps downloading the 3.2.1 update will allow you to get OTA updates in the future (it should).
If you want to make sure, try downgrading to 3.0.1, then downloading the 3.2 update from Vache's thread. Then doing OTA update from your tablet and it should work. Hope that at least gives you some inspiration to try some things!

The above post is a viable way..
But also if i remember right.. You can Take any full complete rom pushed by acer.Flash it with the stock recovery.. With the catch the update rom version has to be region matched and a NEWER ROM VERSION.
Hope this makes sense. Its the procedure i have used in the past to test out a OTA.
People are doing this same thing to get the ICS LEAK. FULL ROM. acer will let you move forword as each full push from them added fixes for previous root ability and so on..
That brings me back to thinking ACER Leaked this ics rom just to see how easly it can be broken.

i want to upgrade my andriod version from 3.0.1 to 3.2 or 3.2.1
build number is acer a500 1.016.05_com_gen1
i can't get it viia normal update so if anyone can help me by link that can upgrade it i will be grateful

US Tablet User - Can I get to Nougat?

Hi all, I'm a US user with W09 and would like to get it to Nougat - I have read the entire "Update to EMUI 5.0" thread and there appeared to be several possible routes, but most were regarding the European version.
I have a US Wi-Fi model and have no allegiance in keeping it a US one, if there's a way to remove the regional aspect to gain access to the update (BETA or otherwise).
I would greatly appreciate if someone who has some experience with or is very confident of the correct path would shed some light for me.
Thank you!

Have you tried update via Firmware Finder? Witch firmware version do you have now?
Sent from my Nexus 6 using Tapatalk

33adi said:
Have you tried update via Firmware Finder? Witch firmware version do you have now?
Click to expand...
Click to collapse
I've just finished reading the entire thread linked above that mentions that method a number of times, so I'm certainly familiar with it, but haven't tried it because sprinkled throughout that thread are plenty of issues encountered. Also, there's no mention of US hardware/firmware specific instructions.
I'm on W09 as mentioned in the OP - thanks for the reply!

Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Sent from my Nexus 6 using Tapatalk

33adi said:
Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Click to expand...
Click to collapse
I'm away from my tablet at the moment but will do later on when I get home.

We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Sent from my Nexus 6 using Tapatalk

33adi said:
We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Click to expand...
Click to collapse
Here's what's in firmware finder @33adi

What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Sent from my BTV-W09 using Tapatalk

gaidin43 said:
What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Click to expand...
Click to collapse
The advantage of removing the US stock rom is that the European one has a beta available that is very stable. My thread is seeking someone who's confident of the steps to 1st going European & 2nd installing nougat once there, as there was some debate of complexity to doing even that.

I've been through exactly what you are wanting to do @dutchdoggs54 . Unfortunately I can't tell you step by step how I got to where I'm at.
I was on W09128BXXX out of the box . Read the topic that you have linked in your first post and decided to do it using firmware finder to force the update to Nougat as they described. It actually went very well and Nougat worked great with the exception of Bluetooth not working.
I have to say during the upgrade when it booted into recovery and it was TWRP I was concerned. Believe it had an error but it worked and replaced TWRP as I recall with a stock recovery.
So after all that I decided I wanted my tablet branded as a BTV-W09C100B006. Below is the topic where a member thought they bricked their tablet.
https://forum.xda-developers.com/mediapad-m3/how-to/bricked-m3-btv-w09-t3612699
They were given directions to download the Full update package for the version I just mentioned.
This member got their tablet working again and in the process found that 5Ghz wifi is enabled on C100B006 by default.
That was the main reason I rooted my tablet.
I followed the directions knowing I force install a different version of Nougat from your link.
Downloaded the full version software and dropped it in the dload folder on my US tablet and did the upgrade.
Tablet rebooted and shortly after it rebooted again going to recovery (I tried may times to boot). Don't recall the error but after I unlocked my bootloader again it reset the tablet and I was able to access it again. I did relock the bootloader so I can see updates without any problems after that.
In the end I got what I was after. My tablet shows as a BTV-W09C100B006 and can check for updates.
5Ghz wifi is enabled by default. As I said I relocked the bootloader so I'm not rooted. Overall it's works so well I'll wait for Nougat to get released and then do the official upgrade. After the scare of booting to recovery it was worth every nervous minute of it.

Try to talk to OP from this thread:
https://forum.xda-developers.com/p9/...-root-t3374068
Maybe he can make this app available to Mediapad M3, then changing OEMINFO will be easy.
I posted a question there.

No luck
Ok, so I tried following @Samavb's great instructions and guidance in the other thread last night. Made it all the way to the point where he says to install 009 from the Huawei website - got it downloaded and loaded up on the tablet only to find that it wouldn't install because the 009 file on the website is BTV-DL09 not the BTV-W09 version a US tablet would need.
So I got frustrated and tried installing the B301 build that appeared on firmware finder when I was on the W09-006 build...this was nougat and was cool but no keyboard and the play store wouldn't install anything, so I was forced to revert back to 006.
So, long story short, hours of work have confirmed that there doesn't appear to be a way to get a US tablet to fully functional Nougat at the moment. If there was a 009 or 010 build like Samavb mentions for the US model, maybe it would work, but those aren't anywhere to be found - firmware finder, russian site he mentions or otherwise.
So, I'll happily sit on 006 and wait for a US OTA update. That is unless anyone can tell me exactly how to make this US model into a European model.

Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.

dr_pepper said:
Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.
Click to expand...
Click to collapse
In Firmware Finder select the menu in the top left corner. (3 bars)
Right below your model number, select change model and enter BTV-W09C100 and then search.
You should see B301 and it's a full OTA. However, as I understand it this is just a beta/test release.
Only issue I had with it, bluetooth didn't work. Seeing as how I don't use it, didn't bother me.
I highly recommend you fall back to the other topic about forcing the upgrade to Nougat.
Only difference from my tablet and yours. I was on C128B002. I had already rooted and couldn't get that update.

Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.

johninsf said:
Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.
Click to expand...
Click to collapse
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.

purple lady said:
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.
Click to expand...
Click to collapse
Excellent and great news! Are you in the US and have the wifi only version?

johninsf said:
Excellent and great news! Are you in the US and have the wifi only version?
Click to expand...
Click to collapse
Yep.

Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.

johninsf said:
Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.
Click to expand...
Click to collapse
from what i gather. if you're going from MM to Nougat, you need to install the Full OTA. for that, there are 2 files, you will need both of them. from there, i'm not sure.