plzz help - XPERIA X8 General

i have an xpreria x8 with free xperia project BOOTLOADER and cm7.1 installed
i dont know if its rooted or not...(most prob it is rooted)
and cwm-based recovery v5.0.2.6
AND I WANT TO INSTALL ROMS
but whenever i go to the zip file it shows:
finding update package...
opening update package...
installing update...
this baseband is not compatible with ROM update to baseband: M76XX-TSNCJOLYM-53404015 first
cannot install
but when i go to the settings>about
it shows the same baseband i.e M76XX-TSNCJOLYM-53404015
plz help
i have tried many roms but all have the same problem

Maybe you flash FXP kernel? You need to use stock I think ..
Sent from my E15i using Tapatalk

Can you explain the step that you followed? I think that you have do anything wrong
Sent from my X8 using xda premium

I had the same problem when I tried to install a custom ROM. So I updated to the latest stock ROM first (using xRecovery) and then I could install GingerDX.
Try to do that.

dhruvdangi said:
i have an xpreria x8 with free xperia project BOOTLOADER and cm7.1 installed
i dont know if its rooted or not...(most prob it is rooted)
and cwm-based recovery v5.0.2.6
AND I WANT TO INSTALL ROMS
but whenever i go to the zip file it shows:
finding update package...
opening update package...
installing update...
this baseband is not compatible with ROM update to baseband: M76XX-TSNCJOLYM-53404015 first
cannot install
but when i go to the settings>about
it shows the same baseband i.e M76XX-TSNCJOLYM-53404015
plz help
i have tried many roms but all have the same problem
Click to expand...
Click to collapse
Hey buddy,
Try with seus repair first or with flashtool.
U must rooting ur set with superonclick or x8toolbox-beta.4.......
reboot with CWM Recovery by tapping screen or back button for Xrecovery...
flash gingerDX rom with update.zip(CWM Recovery) then flash linuxDX kernel with flashtool....
Should Be fine afterthat....
Reboot N Enjoy !!!!
Press THANX Button If I Helped .............

i m not getting any thing. . . .. . .can any one plzzz give me step by step procidure to do it. .. [with dwnld links plzz] . . . . mainly how to flash kerels ?
---------- Post added at 10:12 AM ---------- Previous post was at 10:07 AM ----------
flash gingerDX rom with update.zip(CWM Recovery) then flash linuxDX kernel with flashtool.... did not get it

[[[ Guide for x8 | Flashing | Recovery | Bootloader ]]]
Just Follow With This Tutorial and should be fine
1. Update Xperia X8 with official firmwares or custom firmwares
2. x8 Toolbox beta.4 | Dual Mode Recovery
3. Unlock bootloader & relock bootloader | X8 | W8 | X10 mini | X10 mini pro |
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit the THANKS button if I helped you
Using GingerDX rom (CURRENTLY) on my Xperia X8, OC at 787 MHz, Dalvik2sd, Data2sd,tweaks,Chainfire3D, Sd card cache 4096 KB, Undervolt, MDDI lag fix, Dalvik vm heap size 40 MB, Odexed /system/app, Bravia engine, xLoud engine, BOOTLOADER UNLOCKED (Kernel Alfs 04)....​

Thx brother !! :d

Related

[Q] Cannot install custom ROMS

Hello,
I have been an owner of an x8 for 3 months. I have rooted it and xrecovery installed and would love to get froyo/gingerbread on it. However, I have tried multiple roms, including floyo 2.2.1, and CM7 hackdroid. When I try to install floyo I get MD5 mismatch error and when installing CM7 I get stuck at the boot. Please help!
Remove overclock if you get boot loops. Check minicm thread for no-oc.zip.
Folders can not have spaces. Remove spaces and try again
Sent from my X8 using Tapatalk
How do I remove overclocking? I have fixed the MD5 Mismatch problem however floyo is also stuck on boot loop. Please help!
Have you tried to do full wipe (factory reset) in xrecovery before installing?
Yes, I have tried that.
To remove OC flash this using xrecovery -> custom zip.
For md5 mismatch error, remove any spaces from folder name.
What's your baseband version? I know that floyo 0.25 (what i'm running) required a 015 version, for example. If you would try it on an older version it would result in boot loops.
Sent from my Xperia X8
my baseband version is . Could you suggest either a ROM that will work with my baseband or a way of changing my baseband. Thanks in advance!
deasuin said:
my baseband version is . Could you suggest either a ROM that will work with my baseband or a way of changing my baseband. Thanks in advance!
Click to expand...
Click to collapse
Is there something wrong with my phone or haven't you typed your baseband version? You can find it here: (sorry, it's in Dutch) under "smalbandversie" you can read your version. You have to look for the last 3 numbers. On my system it's 015
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And if yours is older than 015, you can flash it somehow. Otherwise you could install floyo 0.20 (if i haven't it wrong it's compatible with older basebands)
Sent from my Xperia X8
Sorry my baseband is ends in 006. but I have floyo 0.20
What we need is a video guide showing what to do, like a visual one (not just text) - On the lines of videos, a video guide showing how to change a rom would be nice.
Isn't something like that available on youtube? I recently watched a video where someone was explaining for example how to install xrecovery, busybox and then a custom rom on a droid
Sent from my Xperia X8
Hello, I do not have the latest baseband, I have the 006 baseband. Do you know any roms that will work with basebands other than 015? If so please post!
Maybe this link would be of some use for you:
forum.xda-developers.com/showthread.php?t=914513
Sent from my Xperia X8
Sorry, all those roms need the 015 baseband!
Are there any ROMS that will work with the older baseband i.e ending in 006.
Maybe it's better to flash to 015 ?
Because you cant find one easily. And 015 versions should normally be more recent, thus more stable.
Sent from my Xperia X8
No, all ROMs need 015 baseband

i want install gingerDX v19 on xperia x8 E15i

Hello,
i got xperia x8 E15i
i want to install gingerDX v19 on it
but basically i don't know what i have to do
can anyone tell me in short what i have to do
all told me you may install alfs kernel
but i dont know how to do this
and i don know if it have CID lock like htc or what
please in short give me what i must do step by step and i will continue by me self
thanks
Just Follow With This Tutorial and should be fine
1. Update Xperia X8 with official firmwares or custom firmwares
2. x8 Toolbox beta.4 | Dual Mode Recovery
3. Unlock bootloader & relock bootloader | X8 | W8 | X10 mini | X10 mini pro |
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit the THANKS button if I helped you
Using GingerDX rom (CURRENTLY) on my Xperia X8, OC at 787 MHz, Dalvik2sd, Data2sd,tweaks,Chainfire3D, Sd card cache 4096 KB, Undervolt, MDDI lag fix, Dalvik vm heap size 40 MB, Odexed /system/app, Bravia engine, xLoud engine, BOOTLOADER UNLOCKED (Kernel Alfs 04)....​
successful install
pomen said:
successful install
Click to expand...
Click to collapse
Well Done Bro !!!
help me with my wifi
i'm using x8 with gingerDx updated to v19 but after update my wifi gone crazy.....
1- Cant detect any wifi wep n wpa
2- cannot connect to wifi that i choose
fazrin said:
i'm using x8 with gingerDx updated to v19 but after update my wifi gone crazy.....
1- Cant detect any wifi wep n wpa
2- cannot connect to wifi that i choose
Click to expand...
Click to collapse
just try full wipe mostly everything works, if fullwipe
kenel
Hello i have gingerdx20.i try to install another kernel.but when try to flush with flashtool :Flashing aborted:Now unplug the device and power it on-Then go to application settings-turn on Unknown Sources and Debugging.i do all of this things but same problem.i try linuxxd and alf kernel.
please HELP
thank dude
((( RedDeviL ))) said:
Well Done Bro !!!
Click to expand...
Click to collapse
tima kasih RedDeviL...

Pre-rooted system.img of ICS 4.0.4 (.431)

Hi
Here you have the pre-rooted system.img
WHAT IS IT?
It´s the system Folder of ICS 4.0.4 with "su" in "xbin" Folder and "SuperSU 0.94" in app folder.
GREAT! HOW CAN I USE IT?
Install via fastboot using:
Code:
fastboot flash system system_arcS_by_papayayoghurt.img
I COOL, WHERE CAN I DOWNLOAD IT?
Here:
http://www.mediafire.com/download.php?a92p5oocsfek6zo
MIRROR COMING IN 2 WEEKS!
ANY BAD THING?
Yes, sorry. It´s only for arc S(LT18). I will also work on arc(LT15), but it will show LT18 in Settings. I will make it for arc(LT15) in 2 weeks, after holidays.
Regards
Alexander aka "papayayoghurt"
PS: Always remember to press the
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:highfive:
Nobody interested?
thanks for your hard work but i think that flashing RootXperia.zip might be easier:silly:
but thanks anyway:good:
This is more for people who want to restore system partition e.g. because they deleted something, but don't want to loose root.
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
Hi thanks, One request, can you please make pre-rooted image for xperia pro(mk16i) as well ??
If you give me the ftf, yes!
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
hi, thanks for the reply:-
ftf can be found here :-
http://www.mediafire.com/?2f2luvq722ae53v
or
https://rapidshare.com/#!download|928p2|97181409|MK16i_4.1.B.0.431_Baltic.rar|222008|0|0
discussion thread:-
[ROM]Official Android 4.0.4 FW 4.1.B.0.431 for Sony Ericsson XPERIA Pro MK16i (ftf)
Here you have:
Pre-rooted system.img from XPERIA Pro.
Download HERE
I compressed the file to 65 MB.
Warning: The file is only 122 MB big, while arc´s is 177. Please can anyone who have XPERIA Pro make a Nandroid Backup, then flash my img and post here, if the device boots.
Hey,
thanks a lot .. :good:
I will flash it soon.
(pressed thanks as well)
Hi tried this,
Does not boot up, stuck at boot logo.
Btw I have Arc knight Kernel for Pro (stock based), it works with stock based roms, so should work here as well.
cshegde said:
Hi tried this,
Does not boot up, stuck at boot logo.
Btw I have Arc knight Kernel for Pro (stock based), it works with stock based roms, so should work here as well.
Click to expand...
Click to collapse
My file for Pro has 0 Downloads. Can it be that you downloaded that one from arc?
Hi,
I had used the "Pre-rooted system.img of XPERIA Pro.rar" from the link you provided in the below post..
Not sure how your download count is not updated, anyway its not booting up for me
papayayoghurt said:
Here you have:
Pre-rooted system.img from XPERIA Pro.
Download HERE
I compressed the file to 65 MB.
Warning: The file is only 122 MB big, while arc´s is 177. Please can anyone who have XPERIA Pro make a Nandroid Backup, then flash my img and post here, if the device boots.
Click to expand...
Click to collapse
Sorry for reborn the thread, but i have been searching and I don't have anything... How can I make a prerooted ftf file? I would like to create a "custom firmware"
Thank u!!

Recovery | TWRP 2.5.0 | Xolo Q700/Q700i

Finally, Here is TWRP v2.5.0 Recovery for XOLO Q700​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bugs: None found
Flashing Instructions:
1. Extract Recovery.img and MT6589 Scatter file in a folder.
2. Open SP Flash Tool and Choose Scatter file from the folder you extracted in.
3. Click on Download and ignore message which Came.
4. Connect Your Phone by USB after Switching Off
5.You Will See Green Ring after Process get Completed.
You Can also Use Mobile Uncle tools to flash recovery Without PC
Download : https://db.tt/JMcW7Lnh
Note : Don't make mirror of download link without My Permission​
Credits : Michfood for MTK Repack tool, Sikhar Arvind for giving me idea of removing adb to decrease Recovery size, Javum for Making TWRP possible for mtk devices, TWRP dev teams and Me Offcourse.​
XDA: DevDB Information
TWRP V2.5.0, A Custom Recovery for the Xolo Q700, Q700i
Contributors
abhinav2hd
Version Information
Status: Stable
Current Stable Version: 2.5.0
Hey how can I replace my clockworkmod with twrp if I flash it will it be replaced... And if it does get replaced what should I use..... cwm or mobile uncle tools to flash it.... Pls help...
thecoolster said:
Hey how can I replace my clockworkmod with twrp if I flash it will it be replaced... And if it does get replaced what should I use..... cwm or mobile uncle tools to flash it.... Pls help...
Click to expand...
Click to collapse
you can flash it via mobile uncle tools or Sp flash tool and yes it will replace any other recovery which is installed in recovery partition.
Can't I flash it with cwm
Dude one more question when I open the file it says bad zip file.....
---------- Post added at 09:19 AM ---------- Previous post was at 08:53 AM ----------
I am unable to flash it...
---------- Post added at 09:46 AM ---------- Previous post was at 09:19 AM ----------
Wait it worked... Thanks
Dude when I used the twrp recovery to check it out and then rebooted my battery drained 10 percent..... MAJOR BUG... it has never happened before.....
thecoolster said:
Dude when I used the twrp recovery to check it out and then rebooted my battery drained 10 percent..... MAJOR BUG... it has never happened before.....
Click to expand...
Click to collapse
dude, there is no bug like that in TWRP, it is tested by Many Q700 Users. It must be a Problem with your battery. Try to Calliberate your Battery.
The two files are proof enough.......
This is a q700 problem not the recovery problem .. Whenever we reboot our phone battery drains
Sent from my C2305 using XDA Premium 4 mobile app
I hv xolo q700i and it has never happened before
thecoolster said:
I hv xolo q700i and it has never happened before
Click to expand...
Click to collapse
Replace your Battery, it's not connected to Recovery at all and please no more spamming in this thread anymore.
Hi,
The download link is giving 404 not found and I could not find mobileuncletools in google playstore. Please help to flash TWRP on XOLO Q700.
guys plz help me i cant flsh costom recovery or costom rom on Xolo Q700 club plzzzzzzzzzzzzzzzz help me frnd

MIUI 9 - 7.9.14 [BETA] [4.4.2] for HTC DESIRE 816G [MT6592]

MIUI9_BETA For HTC Desire 816G_MT6592
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
==================================
VERSION: 7.9.14
Full Changelog
Highlights
Optimization - Updated Peach blossom and Asphalt themes (09-14)
Themes
Optimization - Updated Peach blossom and Asphalt themes (09-14)
Smart Assistant
Fix - Issues with SMS containing bills (09-12)
==================================
WHATS WORKING :-
Wifi
BT
Hotspot*
Mtp
Torch
Smart Assistant
Storage*
Flash
Usb (mounting in all apps)
Camera
Video recording
Miui Themes
Added Dolby atmos
Xposed
Root
App force close fixed
Ril
Screen Recorder
And much more ...
BUGS :--
Offline charging animation (fixed)
Mi Account Sign-in (app fc)
Download Rom :-
https://mega.nz/#!WlsHADbJ!NBGVOMt5G9eHinGi2jD3OAsJ_IXJlOvXMYvulbDgpfY
==================================​
Version Information
Status: Testing​
How to install
INSTALLATION
Install Twrp from Here :-
Reboot to recovery
Wipe - Dalvik/Art cache,system,Data - then reboot to recovery !
Then flash the rom !
_________Regards - TEAM NOOBS________
Link not working..
How is the ram management?
Cuz in almost all the marshmallow roms ram usage is very high and can't even use Chrome smoothly
Ram management is good , no lags at all.. And the rom is based on android 4.4 , so no lags because of the 3.4.67 kernal ..
Download link checked , and working !
I ask the official to reply. When I install the rom, this error happens..(updater process ended with error)
.. what is the solution?
INSTALLATION
Install Twrp from Here :-
Reboot to recovery
Wipe - Dalvik/Art cache,system,Data - then reboot to recovery !
Then flash the rom !
hi there nice work any chance port it for dug ?
can flash this rom on htc desire 816g [MT6582]..?????
Look please
My antivirus app say have problem look please... ransom lockscreen!rfn
error 7
error 7! this is rom for [lcsh92_wet_jb9] not for htc816g.....
Adhnanafrz said:
INSTALLATION
Install Twrp from Here :-
Reboot to recovery
Wipe - Dalvik/Art cache,system,Data - then reboot to recovery !
Then flash the rom !
_________Regards - TEAM NOOBS________
Click to expand...
Click to collapse
Can you please tell me how to install twrp in htc desire 820g plus
Chipset = mediatek m6592
Kernel number=3.4.67
Build number=1.12.720.1
Android version= 4.4.2
Please help me to install twrp recovery on my device i tried every single form but can't successful...... [emoji17] [emoji17]
Sent from my [device_name] using XDA-Developers Legacy app
I need rom for htc desire 628
Link is dead please help!
Tohru0920 said:
Link is dead please help!
Click to expand...
Click to collapse
Hi
I don't have this device or rom file anymore.

Categories

Resources