Rooted Nook Not Turning On At All - Nook Color Q&A, Help & Troubleshooting

Ive got cyanogen 7.1.0 on my emmc. it was getting a little buggy so i decided to format data,cache,system and boot in mounts and storage. i did that then i rebooted it. the cynogen7 logo came up and with the little neon blue writing under it that says "loading...". so then when it came time for the animated cyanogen logo thing to show up, it doesn't. the screen just stays blank but its still on cause the screen back light was on. so i held down the power button till it turned off and turned it on again. the same thing happened only this time i let it stay on. about 10 mins later i go to check it and its powered off. i try turning it on but it doesn't power up. please help me out.
EDIT: Found this http://forum.xda-developers.com/showthread.php?t=949699 and it fixed my nook.

This is the same thing that is happening for me. I have actually purchased a new Tablet, and want to just put the normal Nook OS back on the device so I can give it to my parents as an eReader for X-Mas.
Please help!!

Bump....Can anyone help me out with this?

Read the 1st post again bud.....he said he fixed his and gave a link.

Related

Nexus does not go past boot screen

First of all, hi to all of you.
Me being a noob with the Nexus, something VERY messed up has just happened to me.
Let me explain from the beginning:
I received the nexus yesterday as a gift from a friend of mine who works at Google (yes, it is the one with the android waving a banner on the back of the phone)
Used it yesterday perfectly, even updated to 2.1.update perfectly fine.
Today, as the batter was dying out, I finally got home and started to charge it (the battery icon was white, with a red outline and a red slash across the battery icon)
Then, the Nexus stopped responding and turned off.
When I tried to turn it back on, it just stays on the boot screen and does nothing.
Now, I have tried the volume down + power button to get to the reset, chose "recovery" and it went right back to the frozen boot screen.
To my knowledge, it is not rooted (although I have read that the Nexus' that employees receive are rooted, I have no idea)
Now, I am stuck with a Nexus paperweight , it doesn't turn on and cant seem to get it out of the boot screen.
Any one here can lend a hand???
P.S. I hope I posted in the correct forum and want to thank anyone that can help ahead of time!
Update:
I did the volume down + trackball + power on thingy and I connected the Nexus to my laptop.
It comes out FASTBOOT USB in red, so it seems it is not totally bricked.
Found the USB drivers and...that's where I am stuck.
I know there is a way to recuperate the Nexus, but I have no idea how...any ideas?

[Q] Need help asap

I recently upgraded my phone to Froyo. Shortly I decided to root my new 2.2 captivate. Everything was going fine until today. I wanted to see if I could sideload apps. So I downloaded sideload wonder machine. When i went to try to use it, my phone started acting laggy. Next, the time in the upper right corner went away. At first, I was running it on debug and my phone wasnt mounted. I decided to unmount it but when i did My phone stopped working completely. So i decided to turn it off. When i turned it back on it went to the att screen and the galaxy s screen. Then my phone started vibrating. Now its pulsing! it vibrates in intervals of about 10-15 seconds. After the galaxy screen the screen goes black but the bottom four keys stay lit up. and it continues to pulse. Ive tried to pull out the battery give it a min n put it back on. ive tried to get to the reboot menu but wont let me get to it. Any suggestions? Is it bricked? thanks in advance
sorry for the confusion. I had an app saved on my internal sd card, so i mounted my phone to get it from phone to pc. Thats when it started acting sluggish, so i tried unmount and it froze the phone.
sounds like you soft bricked it. do a search, there are a few post that will help get you going again.
thank you. will do

Amazing Unbricking Story

On my second HD2, I had missed flashed the it, forgetting to flash it with HSLP first, so not surprisingly, It bricked. 1st the LED wouldn't even come on when plugged in. After accidentally leaving it plugged in for about 2 days, I noticed the light cam back on.
After trying to boot it, It only stayed at the Tmo splash screen over and over...so I decided to just leave it at the screen, Hours went by, and it stay a that horrible pink stick together screen. Then I fail asleep.
This morning I mistakenly picked it up thinking it was my other one, and to my surprise, I hit the power button, and it was working normally, even had the custom ROM. So I re-flashed everything correctly this time, and BAM, another HD2 up and running.
Maybe this set and forget technique will work for others sometime. IDK...lol

Nook -completely- unresponsive/truebrick,full battery,unrelated to Rooted Forever scr

Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
i don't know. i just know my dog ate mine and i'm now in the market for a new screen, so if you don't get it working sell me the unit and get some money for yourself to purchase a new one =D
or you could google the disassembly instructions and try unplugging the battery, not very hard to do. could be of .. some help perhaps?
I would definitely take you up on your offer, but i'm still under warranty.
However, I would still like to have my original, and figure out what is going on and why it happened.
Ideas?
Thank you.
similar problem were solved
Hi! I might have read about similar problem solved on USB host mode here http://forum.xda-developers.com/showpost.php?p=23475998&postcount=131
That's it, thanks so much.
if it help
if it helps let them know in the tread that you had same problem. they are wondering whether it is due to host mode
[N2E]: After automatic update to 1.1, Nook Touch Screen absolutely DEAD--Nothing Work
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Identical problem.... and no fix..
It is a shame you got no solution for this. and the worst, you are not the only one... it happened exactly the same with my Nook ST....
Hopeless...
Machiavelli_The_Man said:
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Click to expand...
Click to collapse
The factory restore does not actually fix every possible problem with your Nook.
If your Nook responds at all, try to boot it up on an SD card like ClockworkMod or noogie.
At least that way you can see what is happening.
The partitioning might have become corrupted which the "factory restore" does not touch.
If no response with anything, try disconnecting the battery.
You might also try booting over USB using the techniques in rooting the new white glow.
Hello I was wondering if I'm just screwed I bought 2 nook simple touch, one for me and one for a present to my mother for her birthday on march 16. I bought them at best buy for $40 a piece on January 30. I used mine and was perfect but when I tried to set up my mom it wouldn't load the license agreement, always got stuck or reboot or something, so I loaded cwm on an sd card just to play around, tested on my nook and was fine, then put it on my moms nook booted once then I didn't press anything and turn it off then I load the image but when I tried to boot again it got stuck on the load screen and wont do anything, no reset sequence will work with the sd card on or off the other nook boots with this sd card. at the end I exchanged with my mom she is happy with her nook an I have a useless unit do you think they will exchange it I didn't rooted it or did anything to it but has the n cwm splash on screen forever. I'm in Costa Rica right now and wont return home until May do you think I'll might be able to exchange it or should I just try to repair it.
I'm glad that your mother got the working one!
You say that that one will boot on your CWM SD card, but yours won't?
It may be hard to get your unit exchanged with a conspicuous screen on it, even if it's not your fault.
When you plug it into your desktop is there any indication of a new USB device found?
If it's charged and no amount of the power button gets a reaction, I'd open it up.
any news???
Hi endor43, same problem here, have been able to find any solution?
endor43 said:
Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
Click to expand...
Click to collapse
There are times when a Nook gets in a mode where it won't accept a charge.
Opening it up and disconnecting the battery for a minute might fix this.
endor43 said:
That's it, thanks so much.
Click to expand...
Click to collapse
When this worked for you did the light turn orange right when you plugged the battery back in? I just took the battery out, plugged the nook into a charger, and with it plugged in plugged the battery back in and the light stays green the whole time yet I'm not able to use the nook at all.
My nook second generation is not responding to my touch I tried everything to get it to work and I eventually got it to completely power of what if it does not work when I turn it on what should I do
It could be power/battery problems.
Check to see if it makes itself known when the USB is plugged in.
If it reacts at all, that's an indication of life.

Display shows Samsung title then goes black same when going into download mode.

First off I am running 4.2.2 on MF3 with root. I have no custom ROM, recovery or any other modules. This literally just happened 30 minutes ago. I've tried searching everything to no avail. My screen randomly went black (after setting it down for 15 seconds) and now it won't work. When I take out the battery and stick it back in the initial pop up is the Samsung name with an unlocked lock that says custom, this will pop up regardless if I press and hold the power button or do anything, which hasn't happened before. After that screen nothing happens as normal. I have tried to boot into download mode and I can get to the initial "WARNING" screen and then get into the download screen with the Android alien and before anything can happen it will go black. So this leads me to believe that is it either crashing or failing after the initial 20-30 seconds of boot sequence. I will also mention that when I have the USB cable plugged into both a computer and a wall outlet that it wont do anything even after i take out the battery and put it back in, try to boot into download, or just hold the power button. The computer won't even recognize that a device has been connected. When it is unplugged I can do what I previously mentioned. Please if someone can help me I would greatly appreciate it. I am really worried that because I have my device rooted I won't be able to take it in for warranty and get it replaced. Any help is greatly appreciated! Thanks in advanced!
Same happened to my phone
The exact same thing seems to be happening with my phone, however, my phone was not rooted. After installing KitKat (4.4.2) the phone was acting a bit weird and, all of a sudden, the screen went black. Can't turn it back on since then. The welcome screen comes up only after I put the battery in. After that it is completely unresponsive. I am also able to see the download mode warning before the phone goes off on its own, and the same thing happens for the recovery mode. I see the 'recovery booting' message, but then the phone turns off.
AT&T is has replaced my phone, but I wanted to get my data before sending the damaged phone back. As stated above, the phone is not recognized by my computer, so I can't access the data through USB. The guys at AT&T could not help me with the data recovery. If anyone could help me with this, I would greatly appreciate it.
D

Resources