Insert sim notification? - Acer Iconia A500

i'm running a rooted 3.2 rom but on the lockscreen it says insert sim card. I have a wifi only model therefore no sim card slot. Anyway to remove this? I tried doing that build.prop thing but it doesn't have the #carrier=wifi only thing. The only thing closely related is a part that says something about the sim=1

Crimson Ghoul said:
i'm running a rooted 3.2 rom but on the lockscreen it says insert sim card. I have a wifi only model therefore no sim card slot. Anyway to remove this? I tried doing that build.prop thing but it doesn't have the #carrier=wifi only thing. The only thing closely related is a part that says something about the sim=1
Click to expand...
Click to collapse
It would help to know which ROM you're using.
http://forum.xda-developers.com/showthread.php?t=1230744&highlight=ro+carrier

I'm using this one: http://forum.xda-developers.com/showthread.php?t=1290318
I fixed it though. I just imported the build.prop from a different rom

Crimson Ghoul said:
I'm using this one: http://forum.xda-developers.com/showthread.php?t=1290318
I fixed it though. I just imported the build.prop from a different rom
Click to expand...
Click to collapse
No sh!t, on the link I posted

Lmfao! Don't no sh!t me! I did it before I saw your post. It was 2 A.M. and I just wanted it fixed before school in the morning. Thanks anyways

for the sim card message to go away you need the ADD the line "ro.carrier=wifi-only " in the build.prop and save it .

query
im grateful you helped on that, but i found that it didnt go away.
using taboonay 2.0 with stock build.prop + the line you mensioned.
nothing changed,
even when i had taboonays build.prop with said line, it still was there
so im thinking, what else could change this? e.g another file to modify/edit etc
any help would be great,
cheers

supermorph said:
im grateful you helped on that, but i found that it didnt go away.
using taboonay 2.0 with stock build.prop + the line you mensioned.
nothing changed,
even when i had taboonays build.prop with said line, it still was there
so im thinking, what else could change this? e.g another file to modify/edit etc
any help would be great,
cheers
Click to expand...
Click to collapse
Just had a look at the thread for Taboonay and it states that his ROM is based on both the A500 & A501 ROMs (not certain why someone would do that instead of putting out two different iterations of said ROM).
Be that as it may, you'd probably get a quicker and more complete answer asking at the source here:
http://forum.xda-developers.com/showthread.php?t=1138051

Related

[Theme/Morph] Gala S Theme Alpha 0.3 CM6

It's hard for me to keep track of a thread for each so go here and updates will be posted there too...
http://forum.xda-developers.com/show...16#post6939216
This theme looks awesome!
Any ideas how I can install it on a Motorola Milestone?
great work hex you always do good stuff to a droid!!!!!thanks been missing mods by hex
just thought id let ya know i lost root installing this as a rom for the droid...it keeps trying to reformat my sd card, it says i have a error on my sd card , i cant run rom manager because it says there is no su app found in /system/xbin but i do see theres a su app in system bin i thinnk? im going to try this once it gets a little further along i like it!! oh yeah one more thing facebook widget is broken once you sign in. its there and ok before you sign in but the second you sign in and go back to the home screen it says problem loading widget.
Theme is awesome! New links would be appreciated. And this does work on CM 6 RC1, correct?
Thx
You mind sharing the icon set?
Wifi doesn't work worth a damn, and I lost root access. Also, the links for the Metamorph versions are dead. This is very promising and I'd like to see it working better.
Hell, if even the WiFi worked, I'd keep using it..but it doesn't seem to.. unless flashing a different kernel will work? I should try that..
EDIT: Flashed a different kernel..didn't work. Still no WiFi, and no root access.
Great work, still buggy though, but it's gettin there.
Anyone can provide mirror to the link
Sent from my Milestone using XDA App
Seriously if you're not going to post an update on any progress, it'd be awesome if you'd at least fix your dead links.
Lesiroth said:
This theme looks awesome!
Any ideas how I can install it on a Motorola Milestone?
Click to expand...
Click to collapse
dont think it will work =( this is a rom and roms CANT be installed on the milestone because of the locked bootloader =(
I put every thing in one thread cause it was getting confusing! So go there in the nexus section or click link in this OP
Link doesn't work buddy, you copy and pasted it wrong.
hookerdj said:
just thought id let ya know i lost root installing this as a rom for the droid...it keeps trying to reformat my sd card, it says i have a error on my sd card , i cant run rom manager because it says there is no su app found in /system/xbin but i do see theres a su app in system bin i thinnk? im going to try this once it gets a little further along i like it!! oh yeah one more thing facebook widget is broken once you sign in. its there and ok before you sign in but the second you sign in and go back to the home screen it says problem loading widget.
Click to expand...
Click to collapse
I am thinking this isn't a ROM, but a theme that goes over a ROM. Although some do not all themes contain ROMS. I D/L'd I did see a specific link for a Droid Ported version. However, I am not sure that the Milestone is included in that.
ataranine said:
Seriously if you're not going to post an update on any progress, it'd be awesome if you'd at least fix your dead links.
Click to expand...
Click to collapse
I noticed the dead link as well check out CM forums, got mine there and it works like a charm however there is still some more development going into this as the one I d/l'd for CM6 RC2 is a beta version. However this theme looks SHARP!! Another good place to look is on ROM manager Premium. This is probably the best I've D/L'd for sure. It has to be 'sup'ah dope,' to add to the already natural dope'ness Cyan6 RC2.
Can you specific the url for cm forum?
Sent from my Milestone using XDA App
404 Not Found
nginx​

froyo x red not working

downloaded this android http://www.multiupload.com/KOY1IS2G8L
when i run haret i get these error messages
line 8: Expected <varname>
unknown keyword: 'INITRD_OFFSET'
unknown keyword: 'rel_path'
unknown keyword: 'INITRD_OFFSET'
but then android starts up normally?!
i get the sprint and 4g animations
then its asks me to launch using either launcher which or zeam, i used both and they both are different in layout, i normally use launcher,
and my WIFI DOESNT WORK, i go to settings turn wifi on but it just says ERROR.
My MAIN PROBLEM IS WIFI SOlVED
Main problem now is that android keeps freeezing, carry on reading this thread
Okay I've edited it, try it now! Should work!
nasko_spasko said:
Try with another haret. Post or attach your startup.txt. ops sorry i didn'saw your startup
Click to expand...
Click to collapse
another haret? do u mean different android version, because if so i dont want 2.1 or 2.2 ive tried them and their not great, want to use froyo red
mickeystar said:
another haret? do u mean different android version, because if so i dont want 2.1 or 2.2 ive tried them and their not great, want to use froyo red
Click to expand...
Click to collapse
NONO forget it
just look the post above^^^^^^
I've attached the startup.txt and put the androit files to the root of sd, not to andboot
nasko_spasko said:
NONO forget it
just look the post above^^^^^^
I've attached the startup.txt and put the androit files to the root of sd, not to andboot
Click to expand...
Click to collapse
but my android still works i want wifi to work
Why are you using FROYO X RED 2011.02.06,
there is a newer release: FROYO X RED CAMERA 2011.02.24 FOR BLACKSTONE
mickeystar said:
but my android still works i want wifi to work
Click to expand...
Click to collapse
The startup, you have posted is very complicated and wrong! Try with that I've posted and download the latest kernel and modules from here
nasko_spasko said:
The startup, you have posted is very complicated and wrong! Try with that I've posted and download the latest kernel and modules from here
Click to expand...
Click to collapse
kk, im busy at the moment check this thread in like a few days times
what kernels do i use the link u posted has loads?
mickeystar said:
what kernels do i use?
Click to expand...
Click to collapse
Well, use the latest(first in list) htc-msm-linux. After the download completes, copy and rename zImage**** to zImage(replace the old zImage) the modules don't need rename, just delete the old modules. I've already posted that in the gingerbread thread, you can read it, take a look at the video, you will like it, I like it
more than FROYO X (I'm talking about the Gingerbread)
nasko_spasko said:
Well, use the latest(first in list) htc-msm-linux. After the download completes, copy and rename zImage**** to zImage(replace the old zImage) the modules don't need rename, just delete the old modules. I've already posted that in the gingerbread thread, you can read it, take a look at the video, you will like it, I like it
more than FROYO X (I'm talking about the Gingerbread)
Click to expand...
Click to collapse
are u telling me to use gingerbread instead of froyo x?
also do i launch using zeam or lanucher. ive been using launcher but my android keeps freezing so that nothing works and i have to restart my phone, ive using the latest modules and zimage but my phone still froze. ive not been able to use my android for more than 10 mins without it freezing
mickeystar said:
are u telling me to use gingerbread instead of froyo x?
also do i launch using zeam or lanucher. ive been using launcher but my android keeps freezing so that nothing works and i have to restart my phone, ive using the latest modules and zimage but my phone still froze. ive not been able to use my android for more than 10 mins without it freezing
Click to expand...
Click to collapse
There is something you mess up! Mine runs with Launcher Pro
Gingerbread is much better than froyo in general, but as I say there is a lot of work to do (the developers)!
i installed froyo red x camera but i don have txt input, i keep getting acore has stopped unexpectedly.....cant therefore sync contacts, sms or make calls as error keeps poppin up
nasko_spasko said:
There is something you mess up! Mine runs with Launcher Pro
Gingerbread is much better than froyo in general, but as I say there is a lot of work to do (the developers)!
Click to expand...
Click to collapse
So how do I stop android from freezing?
mickeystar said:
So how do I stop android from freezing?
Click to expand...
Click to collapse
I'll tell you how I'm doing it. I've just downloaded the gingerbread image, I used to boot it
with the pack(haret+startup) of froyo x, and I've updated the kernel, and modules ofcourse, and rootfs optionally! And it works for me.
BTW, try to put the device into 'Airplane Mode' and tell us if it freezes.
I'm really tired now, I'm coming back from work, so bye!
This should be kept inside the Froyo X Red Camera test thread
This should be kept inside the Froyo X Red Camera test thread
Read that thread and follow the instructions there.
If you cant solve it with those instructions your are much more likely to get an answer from someone with experience with the build or even the creator of the build. Any complaint of a crash or nonstart should come hand in hand with a log.
Search.
Read.
Write.(If this related to an existing thread then ask there)
magfal said:
This should be kept inside the Froyo X Red Camera test thread
Read that thread and follow the instructions there.
If you cant solve it with those instructions your are much more likely to get an answer from someone with experience with the build or even the creator of the build. Any complaint of a crash or nonstart should come hand in hand with a log.
Search.
Read.
Write.(If this related to an existing thread then ask there)
Click to expand...
Click to collapse
u have 9 posts dont tell me what to do. lol
well seriously thanks for the advice
Follow this guide to the letter
http://forum.xda-developers.com/showthread.php?t=959831
I have run x red setup exactly as this thread said and have had no problems whatsoever for the last few days.
I would also suggest flashing one of the newer roms like this one.
http://forum.xda-developers.com/showthread.php?t=616294
Try running this combo for at least an hour before trying to add new apps so we can exclude as many possible sources of failiure
hey there
followed the instructions... managed to run haret on my blackstone however it just can reboot to the froyo... changed the startup.tx file but to no avail.. any help?
Wait a bit will upload the files i am using
Did you unpack all the files at the root of your memorycard (not in a folder)?
If so i will upload an allready set up dump of my system that you can try.
magfal said:
Did you unpack all the files at the root of your memorycard (not in a folder)?
If so i will upload an allready set up dump of my system that you can try.
Click to expand...
Click to collapse
problem solved i replaced my froyo user config with the gingerbread.userconfig
also in airplane mode

MultiWindow Mod working P6200!

multi window mod is now working for P6800 users...see the link below
http://forum.xda-developers.com/showthread.php?t=2346827
Thanks for offering your time here.
The P6810 is STILL waiting for 4.1.2 update. Samsung need to pull their finger out.....
Sent from my GT-I9500 using xda premium
Reserved........ -_- Don't question.
UpInTheAir said:
Thanks for offering your time here.
The P6810 is STILL waiting for 4.1.2 update. Samsung need to pull their finger out.....
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
That would probably explain why i didn't see any then...lol. Sorry to get your hopes up guys...BUT they do have a rom called "erobot" that claims to be touchwiz 4.1.2(may be a port) but that just might work if some one is willing to try it
http://forum.xda-developers.com/showthread.php?t=2276509
^this is a link to the thread about the rom although the actual file is on another site & seems to be in THAI
THEDEVIOUS1 said:
That would probably explain why i didn't see any then...lol. Sorry to get your hopes up guys...BUT they do have a rom called "erobot" that claims to be touchwiz 4.1.2(may be a port) but that just might work if some one is willing to try it
http://forum.xda-developers.com/showthread.php?t=2276509
^this is a link to the thread about the rom although the actual file is on another site & seems to be in THAI
Click to expand...
Click to collapse
Thanks. They have it posted on this 7.7 forum for P6800.
OT,
I built a P6800 JB 4.1.2 ROM for my P6810 (correct mounts etc).. compiled P6810 JB kernel from P6800 JB sources using a P6810 config......didn't boot. Suspect kernel fault or need to flash new P6800 JB bootloader. Have since deleted my work and got other things going.
Sent from my GT-I9500 using xda premium
we did have official 4.1.2 on 6800... I have already upload the android.policy.jar on the [email protected]
with the help of THEDEVIOUS1... we have multiwindows icon now... still not working well but its a starttt.....
edan1979 said:
we did have official 4.1.2 on 6800... I have already upload the android.policy.jar on the [email protected]
with the help of THEDEVIOUS1... we have multiwindows icon now... still not working well but its a starttt.....
Click to expand...
Click to collapse
are u saying the buttons located at the bottom on the status bar are not working because if so thats a known issue. What happens when u hit the maximize/restore icon in the top/lower right corner? Does the app float or does the icon even appear at all? What happens when u drag an app from the tray then drag another app from the tray?
as i replied on the 6200 post... the apps only open as usual apps... the resize or switch icon does not appear anywhere...
edan1979 said:
as i replied on the 6200 post... the apps only open as usual apps... the resize or switch icon does not appear anywhere...
Click to expand...
Click to collapse
apparently i just got really lucky that these combination of files just happen to work on our device *shrugs*
if u are rooted try to replace the "multiwindow.tablet.xml" file in "system - etc - permissions" with this "multiwindow.phone.xml"(dont forget to set permissions & reboot) attached below & see if that makes a difference(floating windows shouldn't work but dual panel might)
i'm also a lil concerned since this isnt a pure stock rom but since its mixed with plus & note 8 files it seems like it should work
View attachment com.sec.feature.multiwindow.phone.rar
still the same... nvm then... will experiment on it... got to go back to work now... thanks for the great start... ^_^
edan1979 said:
still the same... nvm then... will experiment on it... got to go back to work now... thanks for the great start... ^_^
Click to expand...
Click to collapse
i just got finishing comparing the code in the "phonewindowmanager.smali" and it's literally like 4 numbers from being identical...lol if you're not bothered by boot looping i actually would try the p6200 zip from the post in our forum. If it boots but still doesnt work then at least we can rule out what it isn't...so whenever u find time give that a try but of course backup before u do
hahaha... actually i had already test it before you even request for the android.policy.jar
it bootloop alright...
going to test it with the stock firmware... but i need to find time to complete the deodexed stock firmware... its being pending for a while as i need to figure out how to deodexed JB... kind of little bit different from ICS
here is the file from stock deodex Thai ROM P6800DXMD3
Maybe it will help if something was modified in eRobot ROM
has go back to stock... but still... the same... but the minibar icon is missing...
new version
edan1979 said:
has go back to stock... but still... the same... but the minibar icon is missing...
Click to expand...
Click to collapse
i just created a new version for the Tab Plus with the pin & window resize functions working. I made 2 new zips for u guys to try but again no promises so be sure to backup...the files are a lot larger this time(around 42MB) so i had to upload to another site. Before u flash u MUST enable a live wallpaper for your lockscreen background due to a freezing issue with the ripple effect option(please read the update section of my original post in the p6200 forums)
http://www.filedropper.com/p6800stockmd3multiwindowv2
^stock version
http://www.filedropper.com/p6800erobotmultiwindowv2
^ ERobot version
If neither one of these works then swap out the "services.jar" file i've attached below which is located in the "system - framework" folder
View attachment services.jar
double post...please delete
Flashed stock version and after Samsung logo I have a window like when apps are updating but its name is %1$s, %2$s and content is Noon
After 1or 2 minutes - bootloop
yup showing the same symptom...
i check the file you upload and there were systemui and framework as well... it might not be the same with the one use int the system hence crash occur... i'll upload the files from e-robot
http://www.mediafire.com/download/lktyml3dz2scjy9/erobotfiles.rar
edan1979 said:
yup showing the same symptom...
i check the file you upload and there were systemui and framework as well... it might not be the same with the one use int the system hence crash occur... i'll upload the files from e-robot
http://www.mediafire.com/download/lktyml3dz2scjy9/erobotfiles.rar
Click to expand...
Click to collapse
One more idea...pull your systemui.apk from the rom your using, replace the one in the zip & try again
still the same

Sprint DataFix for Note7 Roms Finally.

First of all. This is buggy. I have not had the time to debug it all. it makes the phone, and messaging a little slow when you first open it. Also when you go into Connections, and Mobile networks for the first time it takes an extra 5 seconds. that will come when I have time to mess with it.
I have used this on my PH4 N910P:
Aurora (latest and the previous versions)
Norma V5,6,8
But for Nemesis Rom.. I can't get it to function 100% so I gave up on it.
1. Wipe your stuff like you do your butt. Clean.. Multiple times..
2. Flash your precious ROM
3. Flash RamKernel Note7 (search the forum)
4. Flash data fix step 1
5. let it boot I recommend skipping all the Samsung/google setup for now (you can probably do it but in case you don't follow directions like my kids and have to redo step 1-4 then you are wasting your time)
6. go into connections/mobile networks/apn settings (They should be editable) click on the LTE one to edit it and then just click on the top right and save it (this puts that in your personal saved APNS.** IMPORTANT)
**Edit Just to clarify the LTE one should be "Sprint LTE Internet" then under that is "n.ispsn" you don't need to change anything just click save.
7. Restart go into TWRP flash Data fix 2 (For devs this just copies others.xml as before it locks the apns from being edited)
8. Now setup play store so you can download Network Mode (thanks shadowcliff your a lifesaver! ) in network mode you need to go about half way down select CDMA AUTO (PRL), wait a few seconds it should say under Cellinfo mRegistered=YES. if not play with changing to different networks like EvDo, GSM auto (PRL), LTE/GSM/CDMA Auto (PRL) until it does. it will eventually.
9. set it back to LTE/CDMA Auto (PRL), go to connections in settings and make sure it also says LTE/CDMA then reboot.
10. Enjoy SMS, MMS,Phone calls all working.
Keep in mind when you first send a MMS it may take 30 seconds. I think it has to register you on the network. but it will work. and it will all be LTE speed. I get about 12-15 meg down and 12 up or something.
Like I said this is a fix but it makes the phone in some parts sluggish. but it works. and there are no errors so far that I have noticed.
*****Devs.. if you have questions on what are the main things that make up the fix let me know.
*****EDIT Updated fix to include fixes by tx_dbs_tx
Thanks @shadowcliffs, @XeoNoX, @aaron74! you guys helped me more then you know!
@tx_dbs_tx for the fixes so our phones don't act like a real Note 7
This might work on the Nemesis rom. However I have had too many issues with it sticking. so I gave up.
Thanks for sharing. I will look at all of this and try to pinpoint exactly what needs to be done to get data working on the Sprint N7 rom i'm working on.
OMG Jesus Christ And The saints Off Heaven !! I just Do The Steps and My Note Its Working with A Note 7 Rom
I Almost Cry When I Saw The Setup Process XD XD
Dude Seriously Were The Hell Its The Button To Donate Some McNuggets to you Bro
Thanks So Much For This
Lol i am glad it worked like i said it gets a bit sluggish when u first open stuff but i will work on that enjoy
:good: Awesome, Glad to here, you guys got it going.
Tomorrow i think i will post the flash file i use to get messaging so it doesnt have the chinese letters in it
Before you do that the build.prop needs a few edits. I found a few problems with the arm versions.
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=kryo
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
Needs to be changed to the correct version to support our N4 architecture like this...
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.variant=krait
dalvik.vm.isa.arm.features=default
Simply replace those five entries with the three lines above. Look at the original
N4 build.prop for reference. the cortex chip is the Exynos variant which the Sprint N4 is not.
I have not noticed anything else that sticks out but these lines alone can cause some significant problems. I also noticed some different RIL entries that don't exist in the original sprint N4 build.prop. I'm wondering if these lines come from a different cdma N7 rom perhaps? We'll get it sorted out if we work together. thanks again for sharing your setup. :highfive:
Edit: Another issue in build.prop that must be changed...
ro.vendor.extension_library=libqti-perfd-client.so
change the line above to... ro.vendor.extension_library=libqc-opt.so
this is the correct opt code for the art compiler and you will also need to make sure "libqc-opt.so" from the Sprint N4 is placed in system/vendor/lib directory so that ART can optimize correctly during first boot. The current line in your build.prop is for 64 bit cortex chipset. No good on our N4. There are many many other things that would need to be done to the N7 rom in order to have it optimized to run on our qualcomm snapdragon N4 but I will hopefully have my rom finished soon. but in the meantime you can do these few things to get the rom smoothed out some more.
Congrats!
Sent from my N910P PH4 on Nemesis N7 Port Rom, H-Vitamin Kernel
shadowcliffs said:
Congrats, mind telling wha the major changes are compared to my files posted here http://forum.xda-developers.com/showthread.php?p=69193310?
Sent from my N910P PH4 on Nemesis N7 Port Rom, H-Vitamin Kernel
Click to expand...
Click to collapse
the main items that are included in the fix zips is build.prop and multiple libs as well as csc items. I won't go into specifics but this is the main things that these zips contain. However there are still more keys to this puzzle for the Sprint network. framework is the main one and some system apps as well. When using a rom from a different network there will be many thing missing so this should be considered a temporary workaround until we get it lined out for the real sprint N7 rom.
tx_dbs_tx said:
Before you do that the build.prop needs a few edits. I found a few problems with the arm versions.
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=kryo
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
Needs to be changed to the correct version to support our N4 architecture like this...
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.variant=krait
dalvik.vm.isa.arm.features=default
Simply replace those five entries with the three lines above. Look at the original
N4 build.prop for reference. the cortex chip is the Exynos variant which the Sprint N4 is not.
I have not noticed anything else that sticks out but these lines alone can cause some significant problems. I also noticed some different RIL entries that don't exist in the original sprint N4 build.prop. I'm wondering if these lines come from a different cdma N7 rom perhaps? We'll get it sorted out if we work together. thanks again for sharing your setup. :highfive:
Edit: Another issue in build.prop that must be changed...
ro.vendor.extension_library=libqti-perfd-client.so
change the line above to... ro.vendor.extension_library=libqc-opt.so
this is the correct opt code for the art compiler and you will also need to make sure "libqc-opt.so" from the Sprint N4 is placed in system/vendor/lib directory so that ART can optimize correctly during first boot. The current line in your build.prop is for 64 bit cortex chipset. No good on our N4. There are many many other things that would need to be done to the N7 rom in order to have it optimized to run on our qualcomm snapdragon N4 but I will hopefully have my rom finished soon. but in the meantime you can do these few things to get the rom smoothed out some more.
Click to expand...
Click to collapse
Looking forward to your N7 port.
Yeah this more of a bandaid for now as there was nothing before that worked. I am going to make those changes in a few hours and upload a new version.
I am looking forward to tx_dbs_tx rom as well. He knows his stuff.
Does the 910P have a slot for a GSM SIM card?
wantedman76 said:
Yeah this more of a bandaid for now as there was nothing before that worked. I am going to make those changes in a few hours and upload a new version.
I am looking forward to tx_dbs_tx rom as well. He knows his stuff.
Click to expand...
Click to collapse
Thank you for your time & thinking trying to get something done!!!.... so far data & sms wise its working great....But may I ask, what rom do you prefer Aurora or Norma?
Sent from my SM-N930P using XDA-Developers mobile app
XeoNoX said:
Does the 910P have a slot for a GSM SIM card?
Click to expand...
Click to collapse
We do have sim card slot.. It is a global phone
XeoNoX said:
Does the 910P have a slot for a GSM SIM card?
Click to expand...
Click to collapse
Yes, I use mine with cricket(at't). You have to sim unlock it first.
XeoNoX said:
Does the 910P have a slot for a GSM SIM card?
Click to expand...
Click to collapse
There is one and only one SIM slot on my N910P. A Sprint SIM card is needed for LTE or phone to work. I havn't tried a GSM SIM card in my N910P yet, I have an impression that the phone is locked to Sprint's sim unless unlocked first.
N910P PH4, Norma N7 V6, H-Vitamin Kernel
---------- Post added at 09:24 PM ---------- Previous post was at 09:18 PM ----------
wantedman76 said:
Yeah this more of a bandaid for now as there was nothing before that worked. I am going to make those changes in a few hours and upload a new version.
I am looking forward to tx_dbs_tx rom as well. He knows his stuff.
Click to expand...
Click to collapse
I just tested your datafix file on Aurora v3.1. It successfully converted the phone from GSM to CDMA, which has not been achieved by other datafix before. Kudos to you! How come it's not working well with Nemesis? Can we just swap the phone apps, or it's the framework of Nemesis that prevent the phone from being converted to a CDMA one?
N910P PH4, Norma N7 V6, H-Vitamin Kernel
Ram kernel V2 work..
which one did you use?
KLPFL said:
Ram kernel V2 work..
Click to expand...
Click to collapse
wantedman76 said:
which one did you use?
Click to expand...
Click to collapse
F variant which was removed by Ram... I had it awhile back... he removed b/c it said wifi is not working.. but i used it worked..

Nemesis Rom patch for GSM N910P

This thread is dead! Please delete!
aaron74 said:
I tried posting this other night but xda started maintenance that night. And I just started new job and van broke down tonight. So I'm late. But anyhow this is what I wrote that night.
After seeing last few post(pg 85) of Nemesis Rom. I decided to put a patch together for you guys installing on GSM 910P (should also work for N910T also). This is how i installed this on my device and works.
Because this is aroma Rom I didn't want to flash fixes after Rom.(I wasn't sure if it'd cause a problem). So this will help you integrate. This patch already has T Mobile data patch inside and also works for Sprint gsm users like me.(personally cause I use gsm, I prefer it This way). Sorry Sprint users i can't help.
This patch also includes RamV2 kernel for Sprint. But there's also 2 empty folders one for N910T and one that's called Custom. That's where you put your boot.img.
If you need to edit build.prop further for your data it's in there but works for me as is.
Also note I left the 2csc files (features.xml & others.xml) untouched.
Pretty much all I did was add the aurora data fix minus csc edits. Plus options for kernel. I also added Flipboard cause i like it over upday.
How to use.
1. Unpack Rom.
2. Unzip my patch twice (I double zipped it so noobs can't try installing in twrp)
3. Put your boot.img in folder you want.( In /nemesis/kernel/your device)(already has Ram V2 in N910P)
4. Copy all files over to root of Rom zip.
5. Repack Rom and flash.
Choices will be in aroma for your kernel.
Enjoy!
https://mega.nz/#!I1EzQbIJ!LX_bXLwg50WZ9xFmHVmnhbssm3QduZyvEld37KHkl88
Click to expand...
Click to collapse
@aaron74 if I'm able to do this successfully I'll press the thanks button anytime you post anything anywhere.
Just quote my name and it"ll will be done
Fingers crossed
natibongo said:
@aaron74 if I'm able to do this successfully I'll press the thanks button anytime you post anything anywhere.
Just quote my name and it"ll will be done
Fingers crossed
Click to expand...
Click to collapse
Thanks , just let me know if any problems. I work all day so I check in more at night.
aaron74 said:
Thanks , just let me know if any problems. I work all day so I check in more at night.
Click to expand...
Click to collapse
Unfortunately I couldn't get it to work on my N910P
Aroma ROM didn't recognise my kernel.
It showed kernel for only N910F and N910G
I later put my boot.img into in both folders on two different times but ended in bootloop and intermittent vibrations.
Thanks again for your guide
I'm grateful
natibongo said:
Unfortunately I couldn't get it to work on my N910P
Aroma ROM didn't recognise my kernel.
It showed kernel for only N910F and N910G
I later put my boot.img into in both folders on two different times but ended in bootloop and intermittent vibrations.
Thanks again for your guide
I'm grateful
Click to expand...
Click to collapse
I installed mine this way and worked. But when I made script to share I added the other options. So let me check, maybe i typo in my script.
natibongo said:
Unfortunately I couldn't get it to work on my N910P
Aroma ROM didn't recognise my kernel.
It showed kernel for only N910F and N910G
I later put my boot.img into in both folders on two different times but ended in bootloop and intermittent vibrations.
Thanks again for your guide
I'm grateful
Click to expand...
Click to collapse
So sorry for that. When I built the patch I put the wrong build.prop in it. I was testing different settings on my device and that was a bad one. :crying:
I fixed link and updated post. Everything should be fine now. It is identical to the Rom I packed that I installed. :good:
Haste makes waste!
aaron74 said:
So sorry for that. When I built the patch I put the wrong build.prop in it. I was testing different settings on my device and that was a bad one. :crying:
I fixed link and updated post. Everything should be fine now. It is identical to the Rom I packed that I installed. :good:
Haste makes waste!
Click to expand...
Click to collapse
Ok @aaron74 I'm going to give one more try.
But can you give a detalid guide as to the kind of files to be copied to which destination?
The last time I copied only the boot.img file to the nemesis/device name folder in the original Rom.
I see META-INF in your patch, do I have to copy that as well and overwrite it since folders with same name are found in the original Rom?
Thanks
aaron74 said:
So sorry for that. When I built the patch I put the wrong build.prop in it. I was testing different settings on my device and that was a bad one. :crying:
I fixed link and updated post. Everything should be fine now. It is identical to the Rom I packed that I installed. :good:
Haste makes waste!
Click to expand...
Click to collapse
@aaron74 I have finally got it working on my N910P.
Maybe you can ask @anggara08 to update his post so that other N910P users could also benefit from it.
You are a genius!
natibongo said:
@aaron74 I have finally got it working on my N910P.
Maybe you can ask @anggara08 to update his post so that other N910P users could also benefit from it.
You are a genius!
Click to expand...
Click to collapse
Sorry but my time is limited to a few hours at night, to get on here. I use to get on all the time, was self employed, but now working for someone.
But you copy the whole folders over to root of Rom. But you obviously got it working.
I made a post already on devs thread. Told him he could post it there if he wants. I didn't post it there cause it's just for our device and didn't want to disrupt his thread.
Glad you got it going. I love this Rom. Runs good, good battery, awesome Rom control app. Other N7 ports run alright to but I hate that bright white boot up screen they have, plus I have to mod them a lot to get running right.
I just hope this dev stays with the project.
And no, I am not a genius. I've just retained a lot of knowledge from tinkering and from all the dev and modders here on xda. But thanks for the vote of confidence. :laugh:
natibongo said:
!
Click to expand...
Click to collapse
Also, Do you use Sprint service? (Cdma)
Or GSM service?
Battery usage.
I've been running Rom for 3 days now. So battery stats should be calibrated ok by now.
Below are some pics of my battery usage. I've been working a lot so you can see I don't have much screen on time. But I think the battery usage of this Rom is very good, especially with the Ram kernel.
Do you have to resign zip for success?
Edit: After having issues attempting to install the rom with this patch, I did the following to successfully install:
1. Unzip Rom
2. Unzip patch twice
3. Take the folders inside of the Nemesis-patch folder and copy them to the inside of the NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON folder.
4. Select everything inside of the NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON folder and zip it up as NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON_PACKED
5. Transfer NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON_PACKED to the root of your sd card
6. Flash packed zip.
Thanks for the patch @aaron74 and thanks for the rom @anggara08
aaron74 said:
Also, Do you use Sprint service? (Cdma)
Or GSM service?
Click to expand...
Click to collapse
I use GSM.
You are a genius because you made it possible for me to install a ROM that I wanted so badly
Only problem is the ambient light sensor.
It doesn't work properly
The screen goes very low even in bright environment.
To get it working I always have to pretend to make a call and put the phone close to my ear and back before it works
But for that and the fingerprint, everything works flawlessly.
natibongo said:
I use GSM.
You are a genius because you made it possible for me to install a ROM that I wanted so badly
Only problem is the ambient light sensor.
It doesn't work properly
The screen goes very low even in bright environment.
To get it working I always have to pretend to make a call and put the phone close to my ear and back before it works
But for that and the fingerprint, everything works flawlessly.
Click to expand...
Click to collapse
That's from AOD. It's buggy on all these N7 ports. Either turn it off. Or what seems to help me, if your screen opens up dark, just relock phone pushing power button, and immediately push it again to unlock it.
It's been working for me, and only takes 5 extra seconds. AOD also flashes for me, which I haven't found a cure for yet.
aaron74 said:
That's from AOD. It's buggy on all these N7 ports. Either turn it off. Or what seems to help me, if your screen opens up dark, just relock phone pushing power button, and immediately push it again to unlock it.
It's been working for me, and only takes 5 extra seconds. AOD also flashes for me, which I haven't found a cure for yet.
Click to expand...
Click to collapse
OK
I'll try your method too and see
reekotubbs said:
Do you have to resign zip for success?
Edit: After having issues attempting to install the rom with this patch, I did the following to successfully install:
1. Unzip Rom
2. Unzip patch twice
3. Take the folders inside of the Nemesis-patch folder and copy them to the inside of the NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON folder.
4. Select everything inside of the NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON folder and zip it up as NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON_PACKED
5. Transfer NEMESIS_V2_NOTE7_PORT_N4_SNAPDRAGON_PACKED to the root of your sd card
6. Flash packed zip.
Thanks for the patch @aaron74 and thanks for the rom @anggara08
Click to expand...
Click to collapse
No, you don't need to resign.
Did you download my current link? When I first posted this, I had wrong build.prop file in zip. And I just fixed it a couple days ago.
What program are you using to zip with? Also are you using Sprint phone with gsm?
aaron74 said:
No, you don't need to resign.
Did you download my current link? When I first posted this, I had wrong build.prop file in zip. And I just fixed it a couple days ago.
What program are you using to zip with? Also are you using Sprint phone with gsm?
Click to expand...
Click to collapse
I figured that you didn't have to zip. And yes, I was working with your newest build.prop. I am on a Sprint phone with gsm for freedompop, but about to use tmobile.
I am seeing some issues with the rom though that I didn't see in Norma v10.
1. NFC is missing
2. Rom Control is different
3. I am unable to titanium backup restore many things which causes FC's all over the place.
4. AOD is horrible.
Is there any way to grab AOD, NFC and Rom Control from Norma v10, since they are fixed on that rom?
reekotubbs said:
I figured that you didn't have to zip. And yes, I was working with your newest build.prop. I am on a Sprint phone with gsm for freedompop, but about to use tmobile.
I am seeing some issues with the rom though that I didn't see in Norma v10.
1. NFC is missing
2. Rom Control is different
3. I am unable to titanium backup restore many things which causes FC's all over the place.
4. AOD is horrible.
Is there any way to grab AOD, NFC and Rom Control from Norma v10, since they are fixed on that rom?
Click to expand...
Click to collapse
You probably can swap. It's just figuring out exactly what to swap and erase. I was gonna look into some of this. But I've been too busy with work.
Good luck!
---------- Post added at 12:28 AM ---------- Previous post was at 12:26 AM ----------
[/COLOR]Please, I'm a little shy in this, I did what I say in the thread, but the truth is I do not understand the process well, there's a way I can explain it easier. Or images. Thank you and good work, greetings from Dominican Republic!
Tsmra said:
---------- Post added at 12:28 AM ---------- Previous post was at 12:26 AM ----------
[/COLOR]Please, I'm a little shy in this, I did what I say in the thread, but the truth is I do not understand the process well, there's a way I can explain it easier. Or images. Thank you and good work, greetings from Dominican Republic!
Click to expand...
Click to collapse
Sorry bud. I haven't had much time to get on here.
Yes I wrote the thread a lil vague, more for people that are use to this stuff.
When I get some time, I can try to walk you through this and make a lil better guide.
This is just bad timing. I got so many things going at once. Just started new job, fuel pump went out on car, just bought a new ssd for my laptop trying to get time to install fresh Linux. Just put new 128gb sd in this phone and all my files are gone. Between all that and Christmas stuff with kids.
I use to be on here hours at a time down to hours per week.
I actually just seen new Ram V3 kernel for our device and was gonna update. I'll get back with ya. :fingers-crossed:

Categories

Resources