Dear all,
Mine device using Softbank X01HT and has been flashed to wm6.
Recently, my device got full signal receiption but can't make any incoming or outgoing call (95% can't), the screen will display wordings like "Operation Failed".
I have tried to
1) Reflash the device to unofficial or official english rom
2) Reflash the radio part to 1.41 or 1.43 or 1.47
3) Change to any other SIM card
but problem still occur.
Do anyone got solution/hints for my problem?
thanks a lot.
Netmon said:
Dear all,
Mine device using Softbank X01HT and has been flashed to wm6.
Recently, my device got full signal receiption but can't make any incoming or outgoing call (95% can't), the screen will display wordings like "Operation Failed".
I have tried to
1) Reflash the device to unofficial or official english rom
2) Reflash the radio part to 1.41 or 1.43 or 1.47
3) Change to any other SIM card
but problem still occur.
Do anyone got solution/hints for my problem?
thanks a lot.
Click to expand...
Click to collapse
I have exactly the same problem and have tried the same solutions and some others. The problem seems to be increasing each day. Every morning, the phone shows No GSM while booting and it gets stucked when I try to make a phone call or establish a data connection (no matter if I just flashed a new radio the night before). The funny part is that some times it works Ok. I need to do several resets to get things going, but the whole thing is getting really annoying.
¿Anyone has any idea? PLEASE!! I´ve read TFW very carefully and haven´t found anything related to this problem.
I posted this in the general forum but after some consideration felt it may get more views/help here so I apologise for the double posting ~ ~
Hi,I have an xda orbit (O2 uk) and I ran the USPL super CID on it which went thru fine. I then did an OS upgrade from the official O2 website to WM6. However my phone wouldnt make calls or accept calls. The signal bars were initially low which made me suspect the radio not being optimum. Tried to upgrade the radio from 3.06.90 to 3.08 or 3.19 but it kept on giving an error 270 - file corruption,tried flashing to another rom and still the same error.I then tried to re -USPL it and even that wont take... Can someone please help me out with this as I am at my wits end to a solution...
ok...update so far...repeated the flash over and over again, Hard reset and moved the enable and cert rapi to the xda and ran them there first after taking out the sd card. finally it took after a few more atempts. I then ran artemis 20273 rom which flashed easily....HOWEVER even though the signal bars are still up I cant call out or receive calls. Dialling out ,the call disconnects immediately even before it rings (like 0.5secs after i hit the send key). If I call the phone I get a message that calls are not currently being connected to that number! (i know the sim cards working as its my main number) Anyways run uspl again and flash radio to 3.18...goes thru easily but still no calls in and out. Is there anyone with an idea as to the problem or solution.
Hello,
First of all,
- I'm on Imilka's GB vivo (ported from mdj vivo for des hd)
- I'm using radio 2.15.50.14
- I live in the netherlands
- My network provider is KPN Hi (no data plan, only using Wi-Fi)
Yes, I've searched for this problem already, found 2 different threads, both with (more or less) the same problem, both without solution, so I thought "let's try this again"
two days ago, I took my phone and started to play some games, listen to music etc. just like I do normally, but then I got a pop-up saying "no service". I tried to connect to my network in settings, but then it said my sim-card didn't allow my to connect to KPN. I tried different roms (all android nand) and radios, but without succes. Yesterday I tried putting winmo on it again, then it worked. SD android also worked for some reason. Well I really want Android, and I really love those sense 3.0 parts like lockscreen and rosie, and I definitely want gingerbread sense, but there aren't any of those SD builds.
Do I really have to go back to winmo with a SD build?
Thanks in advance!
You can try this:
go to Dialer and press: *#*#4636#*#*
Then go to Phone infomation, select: WCDMA preferred
press Refresh than Update and Toggle DNS check (0.0.0.0 allowed)
reboot
Doesn't work either
Sent from my HD2 using XDA App
Do you have a rom that did work? if so you can try this:
Extract the libhtc_ril.so and the libril.so and replace the ones that you have in the rom and then try again. I would replace it by pushing it into the rom and then reboot, you might need to fix permissions if it doesnt work the first time. Thats what controls the communication between the radio and the cell towers.
AngelDeath said:
Do you have a rom that did work? if so you can try this:
Extract the libhtc_ril.so and the libril.so and replace the ones that you have in the rom and then try again. I would replace it by pushing it into the rom and then reboot, you might need to fix permissions if it doesnt work the first time. Thats what controls the communication between the radio and the cell towers.
Click to expand...
Click to collapse
Hmm I don't think this will work...
first because I haven't found a working nand so far (only sd) and second because I'm a NAND Android user since it came out, but this is the first time with this problem...
And I've done fix permissions already about 20-30 times =C
I tried putting the SIM card into my sisters phone too, she had full service. The weird part is that I also put my mothers SIM card in my phone earlier, and I had full service, WEIRD. So I thought at first it was my provider's problem, because Vodafone works perfectly good, but then my sister came with her full service...
Still thanks for reply. I hope someone comes with working solution soon...
anyone?
I really need a solution... stuck with wm now. maybe going to wp7
task 29, reflash radio, MAGLDR then android rom? Might help, iunno. xD
I was experiencing the exact same thing as you describe. Unfortunately.....i prob just forgot to renew my contract :S
You were able to call with your sim in another phone??
I already did task29 and its not because of contract because Im on winmo now, and I do have service all the time..
Hi
i got exactly the same Problem. in Android no Service. WMO works well all the Time. if i set to gsm only i got network connection for 1 minute or so. Any hints???
Phil
So, some Progress....
i flashed a RUU to went Back to WMO Stock. -> Wireless Service works well.
next step i installed MAGLDR113 and ClockWork Recovery
Next i flashes this ROM:
http://forum.xda-developers.com/showthread.php?t=933951
Flashed gApps
Reboot
Can't get wireless Service
Phone *#*#4636#*#*
Phoneinformation
GSM Only
DNS check 0.0.0.0 allowed.
Now i got stable Wireless Service Connection. Only 2g but stable till now.
We should gather some Infos to find simularitys between Phones having this Problem:
HTC HD2 LEO EU-Version
Radio: 2.15.50.14
16GB Micro-SD Card 15GB fat32, 1gb ext4 for App2SD
T-Mobile DE
MAGLDR 1.13
Another thing i see on my Phone. If i deactive the PIN-Code and restart the Phone i got network Connection with 3G for about 5 seconds. So it seems there is something which kills the 3g Connection on Boot.
still no solution... anyone else pls?
I have the same problem. Had it with my phone a while back and sent it in for repairs to HTC (for freezing issue). Got another back and it worked fine for awhile. But now I'm getting the temporary no signal issue. Only solution I have found is to turn on airplane mode and turn it off.
Also, I have been able to receive text messages when I have "no signal" but cannot send them.
Running Magldr 1.13, radio 2.15, miui 1.5.27
Hi All,
I have a Motorola DEFY and i added custom ROM 7, 9 (Ginger bird, Jelly bean) and then restored it back to factory ROM with the help of some online forums and the phone worked perfect. Now, I am facing a weird problem. I am unable to make outgoing calls, when 3G data is enabled. If i try making 10 calls, any one of the call will get connected and other calls just ends with a message "Call Ended". I tried my sim card with other mobiles and it works perfect.
I flashed my mobile with the authorized service center and no use same problem. Can someone help me to fix this?
Note: I am very new to this and sorry if I have used any wrong technical terms.
Try to flash a stock ROM (sbf) according to your device (green or red lens) after you make a factory reset.
Hello.
I got a problem with my N910C. I can't send and receive SMS. It is working only short time after I turn on phone (for example one hour, sometimes it's working longer) and after some time my problem appears. I noticed problem on WanamLite 3.2 firmware and I have that issue on Sixperience v6.0 ROM. But I think that linked with my ROM, because when I started using custom ROMs I didn't have that issue. I'm using U1COJ5 modem. I tried to replace my SIM card for new one and I still got this problem.
Any ideas?
Can't send means, that SMS are sending till I got an error, can't receive means that after somebody send me a text I get that message after I will restart my phone.