hi i am andriodboss7!!
and yesterday i was trying out mur4iks data2system
method.
here it is
http://modmymobile.com/forums/527-lg-androids/561814-gt540-data2system-mur4iks-kdz-method.html
And i couldnt boot into download mode as it says to
do!! (i tried everything and it wouldnt)
But thats not the problem..
ok so if you read the link then you would've known that
you are supposed to put phonemode into cs Emergency mode (i think) (forgot)
But cs Emergency mode is only for download mode..
sooo because i couldn't boot into download mode i put the
phone mode into DIAG. because that puts your phone into
download mode!
Ok soo everything was fine and i don't know how but
during the KDZ update the computer said my device storage was removed..
so i was like what the?? (But i wasn't freaked out because i stuffed up my phone like 7 times using KDZ)
so i pulled out the usb and checked my phone and luckly
it was still turned on!
and it said some weird stuff so i just pulled out battery and tried
booting into recovery and fastboot and some weird words come up
on a blue screen so i just left it there.
then what i did figure out was now i could then download mode
so i was like YAHOO!!
and now i am here to ask will it work if i flash a fastboot rom
then flash another rom??
(yeah and i am going to try data2system again!!)
Thanks!!
(Sorry i know this is a really long post!)
Fastboot has a blue screen with white text with Mur4iks kdz. Are you sure it failed?
Try flashing recovery in fastboot mode.
PS nice to see that Zdune completely copied my guide from XDA http://forum.xda-developers.com/showthread.php?t=1070895 - he just added MY name to my thanks section
Sent from my GT540 using xda premium
fishears said:
Fastboot has a blue screen with white text with Mur4iks kdz. Are you sure it failed?
Try flashing recovery in fastboot mode.
PS nice to see that Zdune completely copied my guide from XDA http://forum.xda-developers.com/showthread.php?t=1070895 - he just added MY name to my thanks section
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
yeah i think it had white text on it!!
but also recovery..
And i am certain that the update wasn't complete when
my usb came out!
because the KDZ said it wasn't complete and also
there was no battery case animation (or whatever it was)
and yeah it doesn't boot it says press vol down to reboot and
i do and the same thing just keeps on happening!!
But thanks 4 ur help!!
(oh yeah and LOL Zdune!! )
I will try posting a pic during the weekends because
i have a lot of tests this week!!
were the sd card is held remove it let it drain out for 2hrs put it back together run europe open kdz then use mur4iks resizer instead of data to system its much safer you can even get pre built ones and flash through fastboot
Sent from my tf101 using xda premium 1.54Ghz
Danzano said:
were the sd card is held remove it let it drain out for 2hrs put it back together run europe open kdz then use mur4iks resizer instead of data to system its much safer you can even get pre built ones and flash through fastboot
Sent from my tf101 using xda premium 1.54Ghz
Click to expand...
Click to collapse
thank you danzano!
do you mean mur4iks bootloader??
and yes i would get a pre-built one but the rom i am
using doesn't have a pre-built version!!
(u just wasted a post!! )
9 left!!
androidboss7 said:
thank you danzano!
do you mean mur4iks bootloader??
and yes i would get a pre-built one but the rom i am
using doesn't have a pre-built version!!
(u just wasted a post!! )
9 left!!
Click to expand...
Click to collapse
Thats why i stopped posting lol
yes use mur4iks boot loader get one of the pre made files flash it through fastboot
So i think its something like
sudo ./fastboot flash 230_120somecrap.appsbn or some other wierd extension cant remember ill hava look for ya
If you can still get into download mode etc flash another kdz try again with pre made file
USE THE BELOW IN ABSOLUTE WORST CASE IT HAS HELPED ME ONCE OR TWICE
If that fails however then use method i stated remove battery remove back cover where the sd is connected with the ribbon disconnect for a few mins let it all drain out put back together flash europe open then try the pre made file from mur4iks bootloader again
Sent from my tf101 using xda premium 1.54Ghz
If the blue screen says
Display initialized
USB init ept @ 0x6b000
fastboot_init()
udc_start()
means it fastboot (well at least mine does)
bs828 said:
If the blue screen says
Display initialized
USB init ept @ 0x6b000
fastboot_init()
udc_start()
means it fastboot (well at least mine does)
Click to expand...
Click to collapse
Didn't read what it said..
I will check
I used the bootloader method to resize partitions, just boot to fastboot, open the program, set system to 150 then flash new bootloader, wipe data, and reboot to recovery to restore your nandroid backup, or flash a new rom and your done.
Exactly same method I never wanted to touch Kdz again
Well i did post a list of alternatives ages ago but no one listens do they kdz is dirty and not rock solid bad things can and do happen
Now you just gotta fix it
Danzano said:
Well i did post a list of alternatives ages ago but no one listens do they kdz is dirty and not rock solid bad things can and do happen
Now you just gotta fix it
Click to expand...
Click to collapse
thank you everyone!!
i will try and fix my phone during the weekends somehow!!
Finally fixed it !!
Sent from my GT540
How? What was wrong?
Sent from my tf101 using xda premium 1.54Ghz
Danzano said:
How? What was wrong?
Sent from my tf101 using xda premium 1.54Ghz
Click to expand...
Click to collapse
Oh I was flashing mur4iks data2system when the USB cord came out during the process and stuffed it up. I couldn't boot can could enter download mode.
Yeah and I fixed it somehow!
I will start soft moding possible today!
Sent from my GT540
not saying its a bad thing but gosh we have i think 4 s-mods already O.O
bs828 said:
not saying its a bad thing but gosh we have i think 4 s-mods already O.O
Click to expand...
Click to collapse
yeah thats why i am thinking of making this soft-mod really good and
releasing it when the GT540 communtiy calms down..
ok good luck
bs828 said:
ok good luck
Click to expand...
Click to collapse
thanks!!
bs828 said:
not saying its a bad thing but gosh we have i think 4 s-mods already O.O
Click to expand...
Click to collapse
Theres about seven and thats why ive advised anyone thinking of softmodding to not release crap like some people have ony release when you know you can contribute or focus on a specific area
Sent from my tf101 using xda premium 1.54Ghz
Related
hi, i was running simply galaxy, and decided to try flashing MIUI. I have all the files and I flashed the CM7 Kernel. Im not sure if its just the way its supposed to be and its taking long, but when i reboot my phone after flashing the kernel, it appears to be stuck at the clockwork mod boot logo. is it just taking long or am i in trouble?
If i am in trouble, please, tell me how i can fix it.
I can get into recovery,
I can NOT GET into download mode
so its stuck at the vibrant splash screen or does it go to the boot animation?
I think its soft bricked. Its stuck at the clockword mod logo screen that comes with the kernel.
OK UPDATE
. I can NOT GET into download mode. please, i need help
You might have to buy a jig :/
Sent from my SGH-T959 using XDA Premium App
Alanrocks15 said:
You might have to buy a jig :/
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
You cant be serious. please, no
If you can't get into recovery to flash or download mode then yes
They're like $8
Sent from my SGH-T959 using XDA Premium App
I can get into recovery though.
Can you flash or select options?
Sent from my SGH-T959 using XDA Premium App
Yea, i can actually mount USB storage.if i found a stable ROM, flash, then factory reset, this could possibly work, right?
by the way, recommend any daily, stable ROMs?
Okay you are at the orange recovery right?
If so then no the only rom you can flash is miui or cm7 okay
Go to mounts and storages then format system .data .and cache then flash miui the. Factory reset and reboot
.
Sent from my SGH-T959 using XDA Premium App
Alanrocks15 said:
Okay you are at the orange recovery right?
If so then no the only rom you can flash is miui or cm7 okay
Go to mounts and storages then format system .data .and cache then flash miui the. Factory reset and reboot
.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
flash the miui ROM or the vibrant-efs backup?
getting into download should work if you can get into recovery. take everything out, the battery, sd card, and sim. now put the battery back in then press down vol up and down while doing that plug in your usb cable.
DaSmittyman said:
getting into download should work if you can get into recovery. take everything out, the battery, sd card, and sim. now put the battery back in then press down vol up and down while doing that plug in your usb cable.
Click to expand...
Click to collapse
I tried that before, it didnt work. I just dont know what Alanrocks15 told me to flash- the rom or the vibrantefs backup. i need the OK to flash either one becasue im very afraid i might brick this.
Ok so at this point you can only get into recovery but not download mode, what have you tried to get into download mode? If nothing is working your only option is going to be to make or buy a usb jig which can be had for 8-15 dollars.
as to flashing you would have to flash the miui ROM from recovery, tho if you have a bad download you will just end up in the same if not worse place. (MIUI or CM7 is a bad idea for your first flash ever).
additionally i suggest reading the noob guide on rescuing your vibrick:
http://forum.xda-developers.com/showthread.php?t=848737
shreddintyres said:
Ok so at this point you can only get into recovery but not download mode, what have you tried to get into download mode? If nothing is working your only option is going to be to make or buy a usb jig which can be had for 8-15 dollars.
as to flashing you would have to flash the miui ROM from recovery, tho if you have a bad download you will just end up in the same if not worse place. (MIUI or CM7 is a bad idea for your first flash ever).
additionally i suggest reading the noob guide on rescuing your vibrick:
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
Believe it or not, I just flashed the ROM (like Alan said) and it worked! I dont know how, but it did! i didnt use odin or anything.
Hello a friend need help he just flashed his phone LG GT540 to stock 2.1 succesfully but then when he tried to n flash to 2.3.3 v1.8 he got a problem when it boots if "it boots" he can't see LG logo and the animation also he can't enter to recovery mode nothing appears. I know i have read about this problem but as you know guys it is very annoying look between many posts so PLEASE if anyone has had this problem and found a solution would be nice if you post it here.
Also i would like to create a thread with all possible errors, problems and fixes, this will be very helpul for new users and even old users if they ever have any problem while flashing. So please think about this i think IT IS VERY NECESARY or a MUST for all of us. If you ever had a heavy problem with your phone you will understand the needing of this.
Support and ideas needed for create a super LIBRARY of all possible problems and fixes found so far.
EDIT: OMG i just see it has created 2 exactly posts please mods remove one, i dont know what happened
THANKS! your friend veronica
try flashing a 2.1 backup then flash to 2.2 then to 2.3
Sent from my GT540 using XDA Premium App
eoghan2t7 said:
try flashing a 2.1 backup then flash to 2.2 then to 2.3
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
hmmm how will he flash a 2.1 backup if he cant enter to recovery
flash via fastboot
Sent from my GT540 using XDA Premium App
eoghan2t7 said:
flash via fastboot
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
Like eoghan said...
Go into fastboot, erease everything, flash 2.2 froyo, maybe the superfastfroyo and a newer clockworkmod.
After that, boot into the OS and check if its working without problems.
Then go into Clockworkmod and install the 2.3.3 over ZIP, not fastboot.
After installation, wipe the system, factory res. and boot into it.
I think its gonna work without any problems !
If that doesent work... just try to install and older version of Clockwork MOD over fastboot:
fastboot -w
fastboot erase recovery
fastboot flash recovery "your_recovery_clockwork"
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
Thank you I hope it works
Sent from my GT540 using XDA App
torq1337 said:
Like eoghan said...
Go into fastboot, erease everything, flash 2.2 froyo, maybe the superfastfroyo and a newer clockworkmod.
After that, boot into the OS and check if its working without problems.
Then go into Clockworkmod and install the 2.3.3 over ZIP, not fastboot.
After installation, wipe the system, factory res. and boot into it.
I think its gonna work without any problems !
If that doesent work... just try to install and older version of Clockwork MOD over fastboot:
Click to expand...
Click to collapse
Hey Vero, You try it??
It worked?
BRONCHAS said:
Hey Vero, You try it??
It worked?
Click to expand...
Click to collapse
No ym friend is scared and doesnt want to try lol but ill let you all know guys if it works, or maybe another user that has the same problem try it and let us know
Oww..
Does it work?
The lg logo at the start is like the bios/motherboard logo some pc's show at boot
if it doesn't show up does that mean that the bootloader didn't get flashed right which again means that he/she has bricked the device :c
Moonystorm said:
Does it work?
The lg logo at the start is like the bios/motherboard logo some pc's show at boot
if it doesn't show up does that mean that the bootloader didn't get flashed right which again means that he/she has bricked the device :c
Click to expand...
Click to collapse
I think you are right :/ if the boot is destroyed, you will need to get it flashed by a pro
Hey, try this one
http://forum.xda-developers.com/showpost.php?p=10238074&postcount=41
A lot of people have this problem. It seems that is the only way to fix it. I followed that solution and I got my LG boot logo back.
Hope this will help you.
It's so hard to brick a GT540. You can always recover using kdz emergency mode if the phone will enter download mode. The link above WILL restore your boot process and then you can flash whatever you want to... Probably a fastboot 2.1 kdz and then recovery and then Mur4ik 2.0
Sent from my GT540 using XDA Premium App
Hi guy's
I have a few questions I'm really hoping someone could help or point me in the right direction..
I have looked for answers for a couple of days now when I had some free time but haven't found anything.
1. My brother's GT5-40 OPTIMUS is stuck on the android screen. Prior to it happening it was sitting idle. Would a hard reset fix this?
2. He would like to upgrade from 2.1 to maybe GB is it possible? And where can I find the correct thread to do this?
3. Is there anything I can do to optimize battery power?
I hate to annoy everyone with my questions but I'm new to this kind of thing I've only just started flashing my xu and exploring these things so don't have much to go on and would be grateful for any help at all.
Thanks for looking.
Sent from my ST25a using xda app-developers app
UPDATE:
I tried a hard reset - didn't work.
Tried phone recovery on kdz updater : nothing.
Not sure what's next.
Sent from my ST25a using xda app-developers app
lismore said:
UPDATE:
I tried a hard reset - didn't work.
Tried phone recovery on kdz updater : nothing.
Not sure what's next.
Sent from my ST25a using xda app-developers app
Click to expand...
Click to collapse
you don't provide much info , but first, can you get phone connected to pc ? (example in download mode)
if you can then flash from kdz update is possible. (use this tutorial : link , if no go then try different phonemodes in kdz updater)
Hi
I can get into download mode but nothing else. I tried to flash in kdz bit didn't work for me all the modems seem to sit idle. What other info would be helpful? Sorry I'm in unknown territory with this.
Sent from my ST25a using xda app-developers app
It's been over a year since I've used KDZ, but if not mistaken you have to use fastboot (power on while holding camera) with KDZ. If you can get into fb mode you can try to get KDZ to work. If the modems remain idle you may need to reinstall drivers. If you can get to fastboot you can resolve your problem. G'luck
Hi
Can't get into fb mode I did try a few times. I guess I've hit a wall with this.
Sent from my ST25a using xda app-developers app
lismore said:
Hi
Can't get into fb mode I did try a few times. I guess I've hit a wall with this.
Sent from my ST25a using xda app-developers app
Click to expand...
Click to collapse
fb is not visible , it apperas as black screen ,, but you can confirm that with cable connected to usb (in androidsdk : "fastboot devices" )
also, try that method : unplug usb from phone,power off device (eg. battery out, to be sure), put kdz updater ready, and then plug usb cable and immedetly start kdz updateing... (i remember, i've had same problem and then somehow i've got it working with that method)
also try several times.
also, i cant understand why kdz updater doesn't work in download mode , are you sure that u have all drivers installed correctly ? tried several modes in kdz updater ? (cs_emurdiance and etc.)
hani93
I'll give it a try and report back. I really appreciate this. Kdz didn't seem to work I will double check all the drivers etc and see if I've missed something.
Sent from my ST25a using xda app-developers app
So I tried fb mode, nothing like what you describe happens when I attempt to get into fb mode. I double check that all kdz drivers were there -one was missing so when I got that I was intact able to flash the phone, but it made no difference, I get the LG logo on start up then it goes to the android screen and no further. When I try fb mode following your instructions I get the boot up as described above, I tried it a few times but always the same result.
Sent from my ST25a using xda app-developers app
did u flash fastboot enabled rom ?
Yes used the French v20b couldn't recover the phone even with that.
Sent from my ST25a using xda app-developers app
Enter the download mode (volume - and power button)and flash the official rom(should be in 7z format)
I tried downloading the official Rom but couldn't get it all the links are not working, well all the ones that I tried. Do you know of any? I'm really grateful of all the help.
Sent from my ST25a using xda app-developers app
lismore said:
I tried downloading the official Rom but couldn't get it all the links are not working, well all the ones that I tried. Do you know of any? I'm really grateful of all the help.
Sent from my ST25a using xda app-developers app
Click to expand...
Click to collapse
Try the links in the following thread, it still valid while I test.
[Q] Soft-brick? ADB sees the phone. - http://forum.xda-developers.com/showthread.php?t=1970651
I will try those and see what happens, I hope I can get it and maybe sort this once and fir all.
Sent from my ST25a using xda app-developers app
with this tutorial I repair my gt540 [ROM][Gingerbread] 2.3.7 | CyanogenMod 7 | SwiftDroid ASIS| Mur4ik after that gets the rom of your choice, Since then I have not stopped trying roms heh, do not fear, it's okay, I encourage
Try my script: http://forum.xda-developers.com/showthread.php?t=1856553
See if the device has fastboot on it, try Volume Up+Search+Power or Volume up+Camera+Power (Let go of power when powered up and let go of other buttons when in black screen or if it says 'Fastboot Mode').
You need to install the drivers, look on google.
If there is no fastboot then your only luck is Hyper Terminal and KDZ Updater. (KDZ Updater for flashing and Hyper Terminal for wiping (That is why the device will not boot))
And of course you need to be in download mode (VolDown+Power)
Sent from my Sony Tablet S using xda premium
Hyperterminal?? Still having no luck with kdz, I can flash stuff on the phone but it makes little or no difference as it still ends up on the android splash screen.
Sent from my ST25a using xda app-developers app
lismore said:
Hyperterminal?? Still having no luck with kdz, I can flash stuff on the phone but it makes little or no difference as it still ends up on the android splash screen.
Sent from my ST25a using xda app-developers app
Click to expand...
Click to collapse
Yes Hyperterminal, you have to use it to wipe the data has KDZ does not help with it.
Sent from my Sony Tablet S using xda premium
Right so use hyperterminal yo wipe the data then go ahead with the rest of it. I will try this method and see what happens, the only other thing is that I can't get into fast boot mode at all, I have tried lots of times and nothing happens, can I safely do this in download mode?
Sent from my ST25a using xda app-developers app
Okay So I unlocked bootloader via NRT..
So after unlocking I got into recovery and earsed the data(as mentioned in the instructions)..
Now basically the tablet doesn't boot up to home.
First. Dont use toolkits. No disrespect to the dev but it is way better to do it manually.
Second which recovery did you use?
Third what exactly did you wipe?
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
First. Dont use toolkits. No disrespect to the dev but it is way better to do it manually.
Second which recovery did you use?
Third what exactly did you wipe?
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
I wiped everything..
There is no OS in my tablet now.. :/
theserpent said:
Okay So I unlocked bootloader via NRT..
So after unlocking I got into recovery and earsed the data(as mentioned in the instructions)..
Now basically the tablet doesn't boot up to home.
Click to expand...
Click to collapse
You can re install the rom by going to https://developers.google.com/android/nexus/images#mantaraykot49h and picking the image you need.
Just hold the power button and the both volume buttons down at the same time to get into the fastboot mode before you run the image restore
program. I hope this helps. Good Luck
Make sure you go down to the Factory Images "mantaray" for Nexus 10.
braider said:
You can re install the rom by going to https://developers.google.com/android/nexus/images#mantaraykot49h and picking the image you need.
Just hold the power button and the both volume buttons down at the same time to get into the fastboot mode before you run the image restore
program. I hope this helps. Good Luck
Make sure you go down to the Factory Images "mantaray" for Nexus 10.
Click to expand...
Click to collapse
I'm sorry im a complete noob in all this..
Sorry to trouble you,but how do I
run the image restore
program
Click to expand...
Click to collapse
You download the file from Google and unzip the *.tgz into a folder on the computer, then you run the flash-all.bat from the folder you unzipped the file in.
Sent from my Nexus 10 using xda app-developers app
Good advice but for a noob needs a bit more about being in command line with the adb and fastboot commands in path. I use Linux desktop. I bricked a n7 last week due to a dodgy connector socket/cable during a flash and had to type the flash-all script commands myself a few times til it worked.
Sent from my Nexus 4 using Tapatalk
braider said:
You download the file from Google and unzip the *.tgz into a folder on the computer, then you run the flash-all.bat from the folder you unzipped the file in.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Okay,Did that But sending system is not completing at all,I waited for like 2-3 hours No USE :/
theserpent said:
Okay,Did that But sending system is not completing at all,I waited for like 2-3 hours No USE :/
Click to expand...
Click to collapse
On my bricked N7 I pulled cable reinserted and retried. Keep retrying each command in the script. Worked eventually for me.
nigelhealy said:
On my bricked N7 I pulled cable reinserted and retried. Keep retrying each command in the script. Worked eventually for me.
Click to expand...
Click to collapse
Will give it a few last trys.
Last option,I'll send my nexus 10 with my uncle back to USA.
Will they charge to fix it?
Hi,
You may want to seek for the guide in the Nexus 10 Q&A regarding flashing stock again.
Can you please go a little further in details about how "bricked" it actually is? What exactly happened? There seem to be missing some important info regarding your issue.
Please be a little more descriptive and maybe I can help you .
~Lord
"All I Ever Needed Was A Little Piece of Hope" - World of Fantasy (Helloween)
Sent from my monstrous Xperia Z1
Thanks for all the help guys,The tablet booted
i'm ok
the same problem, but perfect, i see the reply, and my device is ok new!:good::good:
Hellow guys
Here's my background, I rooted my Tab by using z4root which works fine. I flash zImage using Odin with 20% battery (I think this cause the problem D:
After it says "PASS" I immediately pull it from the pc and boot em up. In the first "Galaxy Tab" logo it has Funky rainbow lines,and on the second logo which is "Samsung'' it stops there and vibrates then it repeats all over again. When I try to boot it on recovery mode rainbow lines appear then go back to First logo screen. Download mode works fine but Odin wont recognize it .
After one week of searching on the internet, I cant find my situation. So, I was thinking to post it here on forums. Thanks in advance!
Weird. I recall reported funky rainbow lines when people who have GB bootloader, which doesn't need to be patched, but people go ahead and patch them.
But you flash zImage, not bootloader.
But since it appears in place of the logo, I would still say your bootloader is the one damaged.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Weird. I recall reported funky rainbow lines when people who have GB bootloader, which doesn't need to be patched, but people go ahead and patch them.
But you flash zImage, not bootloader.
But since it appears in place of the logo, I would still say your bootloader is the one damaged.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Umm, Yea I saw that in forums too. That's why I couldn't find my exact situation, I don't know what exactly I would do
Btw I flash it with my galaxy tab in 10-20% battery,Did it cost the problem? I also immediately pulled it from the usb cable even if not boot up completely, but the odin says PASS. What do you think?
Please give me exact detail what would I do. I appreciate your fast response,Thank you!
I assume you were on froyo?
After z4root, you should immediately check if you have a protected boot loader. And patch it if so.
Now in this state, it is unsure if you have a protected bootloader.
What were you trying to achieve by flashing a zImage?
Actually I can't think of why except to root, but you have already done that?
Anyway, best you can do is charge fully, go to download mode and flash a stock rom.
If on the off chance your bootloader is not protected, you can use overcome method which can be found at my signature.
Sent from my GT-N7100 using xda app-developers app
priyana said:
I assume you were on froyo?
After z4root, you should immediately check if you have a protected boot loader. And patch it if so.
Now in this state, it is unsure if you have a protected bootloader.
What were you trying to achieve by flashing a zImage?
Actually I can't think of why except to root, but you have already done that?
Anyway, best you can do is charge fully, go to download mode and flash a stock rom.
If on the off chance your bootloader is not protected, you can use overcome method which can be found at my signature.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Yes Im on froyo 2.2 (I think)
Btw, I already charge the tab and go to download mode. The odin couldn't detect my device
I always saw you saying to use overcome method, the problem is I don't know how. I only saw some download links there. I don't know what exactly to do and to download.
Do you have a guide which I could follow?
I hope my tab will fix soon. Thanks!
Well. The link is the forum thread.
The thread has all the files including PDF guide.
But all useless without Odin detecting.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Well. The link is the forum thread.
The thread has all the files including PDF guide.
But all useless without Odin detecting.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
What do you mean? Is there no chance of getting it fix?
Do I need to fully charge my device? I charge it maybe only 80-90% battery.
Do I need to wait 20 minutes till Odin will detect it? Please answer :crying:
Btw How do I know if my boot loader is protected or not?
Might be a solution
Karl Legson said:
What do you mean? Is there no chance of getting it fix?
Do I need to fully charge my device? I charge it maybe only 80-90% battery.
Do I need to wait 20 minutes till Odin will detect it? Please answer :crying:
Btw How do I know if my boot loader is protected or not?
Click to expand...
Click to collapse
Hey connect your tab for about 10 minutes or more 25 minutes max it will detect and then load odin with the stock rom files and flash! after it says pass your tab is ready. Make sure your tab has 70- 100% charge :good::good:
please help me, even i tried to update from froyo using odin and now i see rainbow lines.. when i start downloading mode, odin recognizes the tab, what to do?
rainbow lines? I thought that happens to people who upgrade to GB, then tried to patch the bootloader (unnecessarily)?
Is that what you did?