Database Users

Install non-market apps without File Manager: Possible?

Simply put is there a way to get an app onto my phone without the market or file manager?
I ask because I want to use Haykuro's G build but I cant download any apps. I do however have all the ones I use regularly backed up onto my SD card but I cant access them without a File Manager (which I cant download to use). Is there a way?
|Spike|

There's always the option of using AppsInstaller/APKInstaller and putting APK's onto your SD Card. Though, to install AppsInstaller, you have to install it through ADB.

Unicornasaurus said:
There's always the option of using AppsInstaller/APKInstaller and putting APK's onto your SD Card. Though, to install AppsInstaller, you have to install it through ADB.
Click to expand...
Click to collapse
How do I install thru ADB?
|Spike|

Get the android usb drivers, adb.exe and adbwinapi.dll from an Android SDK. Plug the Dream in via USB and point to the location of the drivers when it is installed. Then open your command line, navigate to whatever folder adb.exe is in and type adb install <full path to the apk>. If you run Linux hopefully you can figure it out on your own based on the steps above.
Alternately, upload all the apks you want to the internet somewhere. Check the box to enable installation from Non-market sources in the system settings, then type the full URL of the apk into the browser. The package installer will take over from there.

Here's how you do it. Assuming your G1 is rooted
1. Download the attched files, and copy them into your \system32 folder (Start > Run > %systemroot%\system32)
2. Sure your G1 is enabled for USB Debugging (Settings > Applications > Development > USB debugging) and that your G1 has the appropriate drivers installed. If not, download the USB drivers from HERE
3. Plug your G1 into your computer (Make sure you have USB 2.0 - Click here to find out how to check). When your G1 says "USB Connected" DO NOT click "Mount"..don't do anything
4a. Vista users - Follow these steps. For XP Users, skip to step 5
4b. On your computer, browse to the directory where the APK for your file is located
4c. Once located, hold SHIFT and right click on a blank area of the folder
4d. Click on "Open Command Window Here"
4e. Type "adb install nameofyourapkhere.apk" - without the quotes.
4f. It might say something like "daemon service not started" or something, but it will start it and continue. It'll then say something like 626k/1293k bla bla bla
4g. If it was successful, it will just say "Success". You can close the command window and SHAZAM! Your program will now be installed on your G1, and you can access it like any other program on your phone
5. XP Users - Follow these directions:
a) You can either go Start > Run > type CMD and press enter
OR
Windows Key + R > type CMD and press enter
Navigate to your APK file via the command prompt. For easy usage, put your APK file on your desktop. That way all you have to do is type "CD Desktop" into the command prompt
b)Type "adb install nameofyourapkhere.apk"
c)You may get a couple of messages like in the steps for Vista users
d)If all goes well, you too will get the success message
e)Enjoy your application!
Any confusions, let me know. Hope it helps, and Good Luck!

I've been using a local web server and the android browser.

untermensch:
Thats a possibility, but oddly enough, that requires a http-server
AGx-07_162:
With unicornasaurus's method above, you can install all the apk's you want... you can install apkinstaller and use that through that method, but you can just aswell install your apk's directly through it

I ran into the same problem. Here is the easiest ways to get the appinstaller on your G1. Download this file from your g1 browser or Gmail yourself this file, and download.
http://www.mediafire.com/?egy0mop2qqx

How to push files through ADB

Prerequisites have...
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish

usadevil7193 said:
hi mate...i m new to android..i own a nexus1..hav rooted without unlockin d bootloader..i am tryin to push d track ball to wake mod...evry time i type adb remount it says permission denied..any ideas to get things workin...???????
Click to expand...
Click to collapse
Welcome to XDA and Android! Are you trying to get help for your Nexus One? This forum here is specifically for the HTC Hero CDMA.
You will probably find better and more specific help in the Nexus One forums which are here: http://forum.xda-developers.com/forumdisplay.php?f=556

Great post, very easy to follow, thank you.

yea I'm trying to do this, over and over, but with not luck. i have sdk on my pc and im running the cmd prompt to run adb remount & devices and its not picking up the phone, wth is going on, plz help

this also works for the samsung Galaxy S in recovery mode.

mikeybonez28 said:
yea I'm trying to do this, over and over, but with not luck. i have sdk on my pc and im running the cmd prompt to run adb remount & devices and its not picking up the phone, wth is going on, plz help
Click to expand...
Click to collapse
mine shows up but then says error, device offline

hi, i have adb recognizing my phone, but i still can't seem to push the files over.... every time i try, i get 'cannot stat 'su' : No such file or directory'. i have made sure over and over to put the files in the same folder where adb is.... actually i have tried placing the files in the tools folder, as well as the platform-tools folder, and i keep getting that error when i try to push anything.
any suggestions? thx

yogi2010 said:
hi, i have adb recognizing my phone, but i still can't seem to push the files over.... every time i try, i get 'cannot stat 'su' : No such file or directory'. i have made sure over and over to put the files in the same folder where adb is.... actually i have tried placing the files in the tools folder, as well as the platform-tools folder, and i keep getting that error when i try to push anything.
any suggestions? thx
Click to expand...
Click to collapse
i had the same issue with something i was trying to push. I think you need to make sure you have exactly the same file name like caps and all. i was trying to push rootexplorer.apk and i got the same message but i then changed it to RootExplorer.apk and it work.(notice the difference in caps)

just watch this and it'll explain everything.
http://www.youtube.com/xdadevelopers

Does it matter where sdk is installed my file path is
C:\Program Files\Android\android-sdk\tools
instead of
C:\android-sdk-windows\tools.
I just installed it in the default location.
I type adb remount and get the not recognised command.....
Thanks.
I don't think my phone is being picked up?

{LCD}Stelios said:
Does it matter where sdk is installed my file path is
C:\Program Files\Android\android-sdk\tools
instead of
C:\android-sdk-windows\tools.
I just installed it in the default location.
I type adb remount and get the not recognised command.....
Thanks.
I don't think my phone is being picked up?
Click to expand...
Click to collapse
Make sure your have the drivers for your phone installed first of all.....Then, in your command prompt you have to change directories to the sdk (which you made harder by not installing to C:\
Try: cd Program Files\Android\android-sdk\tools
Then type: adb devices
That should return "xxxxxxdevice" connected....Then you know you have it set up.

Look in kyouko sig he has all the commands for adb
Sent from my HERO200 using XDA App

Bierce22 said:
just watch this and it'll explain everything.
http://www.youtube.com/xdadevelopers
Click to expand...
Click to collapse
great video arse....thanks for the help donkey

Flashing fresh ROM via ADB in Linux
Hello there.
M volumeUp and VolumeDown buttons are broken on my rooted Desire HD, so I cannot go through CWM any longer.
With regard to this post, I would ask the followings:
1) can this method be used to flash a new ROM (i.e. Coredroid, Leedroid..) without the need of those 2 buttons ?
2) My PC runs Linux. How does it work with this O.S. ?
Thanks
paolo

pacut said:
Hello there.
M volumeUp and VolumeDown buttons are broken on my rooted Desire HD, so I cannot go through CWM any longer.
With regard to this post, I would ask the followings:
1) can this method be used to flash a new ROM (i.e. Coredroid, Leedroid..) without the need of those 2 buttons ?
2) My PC runs Linux. How does it work with this O.S. ?
Thanks
paolo
Click to expand...
Click to collapse
There is a thread somewhere on how to flash without a SD card and flashed using adb I believe, but don't take my word for it. Adb works fine with Linux, just have to set it up differently. Look in my sig and select the compile aosp on Ubuntu one and follow instructions on getting the USB set up.
Sent from Dorian's HTC Hero CDMA

Yes, I saw it. It's http://forum.xda-developers.com/showthread.php?t=911228
The fact is...still have to navigate through menu via VolumeUp/volumeDown buttons

Maybe through ROM manager, premium, I can install ROM direclty.
I am gonna trying
YES ! It works !

Hi I need help. I accidentally wipped my phone in CWM and now I'm trying to use adb push to push the update.zip into my phone sd everything seems to work but then in CMW it says there are no files..
any suggestions?
[Edit]
nevermind
I kept trying different locations
not sure which one did the trick but I'll list the one's I tried
so \update.zip /sdcard/
.... /sdcard/update.zip
(note I put "/update.zip" thinking maybe it needed to be reallocated to the same file/destination

Can i use adb push *.apk /system/app to push several files at once, and then repeat but using *.odex instead of *.apk? I keep ending up getting the same error, and i want to find out which app is messing with me...

rulermon said:
Prerequisites have...
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish
Click to expand...
Click to collapse
Hey guys ...
I have also rooted my phone , everything was OK until one day i tried to write something to /system/app and i recieve this error:
in Addition , i am writing "adb shell" and it shows me $
if i am doing adb shell --> $ --> su --> it shows #
Can some1 knows what is the problem?

how to disable light sensor in stock rom

this light sensor is really pissing me off , is there any way to shut it off , i'v found a way that is telling me to chmod 777 the patch file after installing it manually but idon't know what chmod 777 is and how to do this please help me

Is stock eclair there isn't a GUI option to disable it.
About chmod 777, I haven't done it yet... but I guess you have to adb shell something.
To know how to use those commands, just have a click on the search button...

maveloth said:
Is stock eclair there isn't a GUI option to disable it.
About chmod 777, I haven't done it yet... but I guess you have to adb shell something.
To know how to use those commands, just have a click on the search button...
Click to expand...
Click to collapse
i searched and found nothing please help it's pissing me off for real !! se u suck i bought this phone because of it's design but their software update service sux !

I have found what you were looking for [just search in devs forum].
Here it is an explaining link:
http://forum.xda-developers.com/showthread.php?t=888232

maveloth said:
I have found what you were looking for [just search in devs forum].
Here it is an explaining link:
http://forum.xda-developers.com/showthread.php?t=888232
Click to expand...
Click to collapse
thanks i found this thread before but i can't apply this method because i don't know how to chmod777 the file so i can't get this to work ? can you try it and then tell me how to exactly do it please , thanks again m8

First thing, you have to learn how to adb shell.
But you have to make everything ok before using it.
So, let's see how it has to be done..
Download the .zip file posted on the other thread [linked above].
Using root explorer, just copy and paste the content of the .zip file under the /etc/ path of the phone.
After you have done this, let's adb shell.
1. Download this file: http://db.tt/cq44S4v
2. Extract the adb.zip file to C:\adb [there will be a folder named "adb" within the C:\ path, with 3 files within it].
3. On your phone, click Settings > Applications > Development, and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable [it needs to be on]. It should say installing drivers if your phone is plugged for the first time and you are using Windows.
4.1 You'd better install the drivers which comes with X8 software [PC Companion], or just google for them.
5. After it installs the drivers, go to the Start menu and type "cmd" into the search bar to open the command prompt.
6. Type the following into the command prompt window [hitting enter at the end of every line]:
Code:
cd\
cd adb
adb devices
You should see a serial number pop up, it’s the serial number of your phone. This means you are all set.
After all this procedure, you can finally "chmod" your files.
Always from the CMD, type this:
Code:
adb shell
You should see a "#" on the left. That's good.
Now enter the path with the file to chmod:
Code:
cd /etc
Then finally chmod it:
Code:
su chmod 777 hw_config.sh
You're done.
Hope this helps.

maveloth said:
First thing, you have to learn how to adb shell.
But you have to make everything ok before using it.
So, let's see how it has to be done..
Download the .zip file posted on the other thread [linked above].
Using root explorer, just copy and paste the content of the .zip file under the /etc/ path of the phone.
After you have done this, let's adb shell.
1. Download this file: http://db.tt/cq44S4v
2. Extract the adb.zip file to C:\adb [there will be a folder named "adb" within the C:\ path, with 3 files within it].
3. On your phone, click Settings > Applications > Development, and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable [it needs to be on]. It should say installing drivers if your phone is plugged for the first time and you are using Windows.
4.1 You'd better install the drivers which comes with X8 software [PC Companion], or just google for them.
5. After it installs the drivers, go to the Start menu and type "cmd" into the search bar to open the command prompt.
6. Type the following into the command prompt window [hitting enter at the end of every line]:
Code:
cd\
cd adb
adb devices
You should see a serial number pop up, it’s the serial number of your phone. This means you are all set.
After all this procedure, you can finally "chmod" your files.
Always from the CMD, type this:
Code:
adb shell
You should see a "#" on the left. That's good.
Now enter the path with the file to chmod:
Code:
cd /etc
Then finally chmod it:
Code:
su chmod 777 hw_config.sh
You're done.
Hope this helps.
Click to expand...
Click to collapse
lol it's freaking hard , thanks for your help m8 i appreciate it is there any easier way?

Have you tried installing Spare Parts from the market. I know it has light sensor tweak option plus has tons of other useful tweaks and monitors.
Sent from my I7500 using Tapatalk

Master Darko said:
Have you tried installing Spare Parts from the market. I know it has light sensor tweak option plus has tons of other useful tweaks and monitors.
Sent from my I7500 using Tapatalk
Click to expand...
Click to collapse
tried it still no use , the sensor is still working !!

Setting default install path in android

This post is to help you set your phones default install path to your phones sd card on any android device.
so here we go..............>>
1. First you have to enable USB debugging on your Android device from Settings > Applications > Development > USB debugging.
Now you need to download and install the Android SDK on your computer from google....please google it.
Once setup is downloaded and installed you click on Available Packages to the left.
should you get any error message at this point, enable “Force (url) in the Settings then from the list of available packages, select “Usb Driver package”, click on the Install Selected button in the bottom right corner and follow the prompts.
2. Connect your phone to your computer with a USB-cable. Your OS will prompt you to install new drivers.
Choose to install them from
C:\Program Files\Android\android-sdk\extras\google\usb_driver folder
when you are asked to install drivers
(If for some reason you are not asked to install drivers as it happens sometimes in windows 7. Go to device manager and look for your phone under the usb device list..............right click and choose update drivers....navigate to C:\Program Files\Android\android-sdk\extras\google\usb_driver folder" to update) If you do not know how to update then google it.
NOTE: You need not mount your device; you only need to plug-in the cable.
3. Next, run a command prompt and navigate to the Android-SDK/platform-tools folder. In Windows, this is done by selecting Run from the Start Menu (or by pressing Win+R) and typing cmd. You change drives in the command prompt by entering the drive letter followed by a colon ), and change folders with the CD command. For example, to enter the Android-SDK folder, simply type C: cd android-sdk.
4. Whiles in the Android-SDK/platform-tools folder, type in
adb devices
you should get a serial number starting with “H” in return. All you have to do next is enter
adb shell pm setInstallLocation 2
You’re done! Android will now install apps to the SD card by default.
To switch back to storing software on the internal memory,
enter
adb shell pm setInstallLocation 0
With everything done correctly you should not have that "annoying memory getting full" message anymore.

If you have a terminal application installed on your phone you can use also that for entering the commands and you should notice, too, that it works only with 2.x roms.
Sent from my Gingerbread on Dream using XDA App

Or you could use a utility:
http://forum.xda-developers.com/showthread.php?t=1765929

But how do you specify a specific directory?

Getting Error
I am getting error "/data/anr/traces.txt: Permission denied" when I give Command "adb shell pm setInstallLocation 2"
Please Help.....

On some updated SDK version its "set-install-location"

Hi,
I've done this and it worked. however I changed my sd card from 2Gb to 4Gb and now it will not work anymore.
I've redone the steps above and, got confirmation that [external] memory is being used, however when I want to install a new app I get the same error message "not enough space"
Android GT-S5830i
ver 2.3.6
Any suggestions
Thanks

[noob-read] adb and fastboot. What is it? How can it help you?

Please note, I can only speak with any degree of certainty about devices bought from Play / Moto. I cannot attest to the accuracy of this information for US carrier versions etc. Anything you do is at your own risk
Contents / Thread overview
Introduction
What is Fastboot?
What is adb?
How to install adb and fastboot
How to test adb and fastboot work
OK Gimme some useful fastboot commands please!
OK Gimme some useful adb commands please!
A little more about using Windows command prompt
Myth Busters
Introduction
adb and fastboot are very useful command line tools. They can be used from Windows, Linux or Mac to carry out tasks on your android device, such as moving and backing up files, rooting and restoring your phone to it's factory state. Understanding how to use these tools could save your phone when you get yourself in trouble. This is especially true of rooted users. Particularly those of you who are "new to the scene". You definitely should read and understand this thread before you do ANYTHING root related.
This thread is not intended to be a non-exhausted reference. It is merely here to give an overview of the most basic of basics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is fastboot?
Fastboot comprises of 2 components.
1) Fastboot mode on the phone (The Bootloader)
2) Fastboot tool on your computer
Fastboot is a small command line tool that you can use from your computer whilst the phone is connected via USB and you are booted into the bootloader. The most common uses for fastboot are:
Unlocking the bootloader - needed as part of the rooting process
Flashing a custom recovery to the device - needed as part of the rooting process
Flashing factory images - used for saving / trestoring your device back to stock
Being able to do these 3 things are essential before rooting. Many new users skip learning these and use a toolkit to root. As a result, when they mess up and we try to explain what they need to do to fix their issues, it becomes very difficult for us to help as fastboot is not understood. It is YOUR responsibility to understand these things BEFORE you mess up.
What is adb?
adb is another small command line tool that stands for "Android Debugging Bridge". Again, it can be used from a computer connected via USB to your android device. It can be used whilst the device is booted into Android or (if you have a custom recovery), it can be used in recovery too, unlike fastboot (yes, adb and fastboot are NOT the same thing) which can only be used in the bootloader.
adb can be used to push files to (or pull files from) your phone. It can also be used to execute many of the commands available in Linux terminals (Or Android terminal emulators) on the device itself. We're not here to cover all these commands however. We just want to cover the basics.
How to install adb and fastboot
adb and fastboot are very easy to install and can be installed on Windows, Linux and MAC computers. The Windows install can be a little bit more complicated than the other 2 and may need additional drivers installing too.
Windows.
There is a very handy tool that can install adb and fastboot in 15 seconds. It is recommended that you use this to install adb and fastboot. Please see the link immediately below for that tool:
ADB, Fastboot and Drivers - 15 seconds ADB Installer - Really quick and easy way to install adb and fastboot (by @Snoop05). Download links are at the bottom of post 1.
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide .. This is asking to install for all windows users. < 15 second installer needs updating to SDK 23, which is required for latest Android versions.
Download the latest SDK (adb and fastboot) versions here: https://developer.android.com/sdk/index.html (Scroll down to SDK tools only) then download the Windows *Installer*.
Open the installer and select "Platform-tools" and install the packages. This should create "C:\Program Files (x86)\Android\android-sdk\platform-tools"
Now we want to set this path as a Windows Environment variable PATH to make the executables work system wide:
right-click computer > properties > advanced > environment variables.
under system variables click "path" and click "edit"
at the end of the line, add the below:
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools
Please note, the semi-colon ; is VERY important.
You may also need to install drivers.
Here is a link to the Google USB Driver: DOWNLOAD THIS
Code:
To install on Windows 7:
- Ensure existing drivers are uninstalled first*
- Extract the zip to c:\adb (created earlier by the installer)
- Right-click "Computer" > Manage in windows and choose "Device Manager"
- Boot the Nexus 6 to the bootloader (Volume down + Power) and connect the USB Cable
- Watch for any new devices with exclamation marks appearing
- Right-Click the new device > Update driver software
- Choose the "browse" method and browse to c:\adb, find teh folder you extracted then follow the wizard to the end - using amd6 64 if you're on a 64 bit system and i386 if you're on a 32 bit system.
*To uninstall existing drivers, boot into Android and connect the USB cable. Monitor device manager for the device showing up. To uninstall the device, right-click it to uninstall it. At the prompt, ensure you also choose to delete the driver. Repeat this for bootloader and recovery.
Code:
To Install on Windows 8, you may need to additionally disable driver enforcement
- From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the - -- pop-out bar to appear, then click the Gear icon).
- Click ‘More PC Settings’.
- Click ‘General’.
- Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
- Wait a bit.
- Click ‘Troubleshoot’.
- Click ‘Advanced Options’
- Click ‘Windows Startup Settings’
- Click Restart.
Once that is done, your Windows computer is configured for adb and fastboot.
In device manager, the device should show up as below, depending whether you are booted into recovery or bootloader...
Recovery - Android Device > Google Nexus 4 ADB Interface
Bootloader - Android Device > Google Nexus 4 Bootloader Interface
If it shows as something different, either you have existing drivers in the way or something went wrong.
Linux and Mac
Here is a really simple tool to install adb and fastboot on the above OS. The only expectation is you know how to open and run a terminal command. Please see the link immediately below:
Nexus Tools 2.2 (Featured by XDA) - adb and fastboot installer for Linux and Mac (by @corbin052198)
Once you have installed adb and fastboot from the above link, you're ready to go.
How to test adb and fastboot work
As previously mentioned, adb and fastboot are both command line tools. That means you must run these tools from command prompt (cmd in Windows) or Terminal (Linux and Mac).
Remember earlier, I mentioned that fastboot can only be used in bootloader? and adb can only be used in Android (or custom recovery - lets cover that later)? We can use the command "fastboot devices" and "adb devices to see if we have adb and fastboot working correctly.
Lets try it.
Boot your phone into android
Connect it to your computer via USB
Open cmd (start > type "cmd" on Windows) or Terminal (Mac/ Linux
Type in the windows "adb devices" and press enter
Here is what we don't want to see:
Notice how there is nothing underneath where it says "List of attached devices" That means it cannot see any device
Here is what we DO want to see:
We can see that there is now a device listed.
OK lets test fastboot. Unplug the USB and turn off the phone. When it is off, hold down Volume down + power until you feel the vibrate. You will now be in the bootloader. Reconnect the USB cable.
In the same window (cmd or terminal) we're going to now type "fastboot devices".
Again, here is an example of what we don't and do want to see:
If in both modes, you can see your devices "Serial Number", then you know they are both working.
Please note that if you cannot get adb and fastboot to work "system wide", you can open the command prompt to the location of the adb and fastboot executables exist and try from there.
OK Gimme some useful fastboot commands please!
Here are some of the most useful fastboot commands you will come across. Fastboot is used mostly for flashing images to the devices partitions on the internal memory.
Code:
fastboot oem unlock
This unlocks your bootloader and allows you to flash a recovery to root. WARNING, this will wipe your device. Rooting the N6 is essentially unlocking the bootloader, flashing a recovery and then putting the SuperSU zip on your sdcard and flashing it via the recovery. This thread covers rooting: [HOW-TO] The Nexus 6 All-In-One Beginner's Guide by @xBeerdroiDx
Code:
fastboot flash recovery recovery.img
This will flash a recovery.img to the recovery partition. The command is broken down into "fastboot flash" (what to do) "recovery" (where to flash to) "recovery.img" what to flash there. In the terminal or command prompt, you cannot just type "recovery.img" though. It has to be the path to where the recovery image is. For example, if my recovery image is on my desktop, I would have to type:
Code:
fastboot flash recovery c:\users\rootsu\desktop\recovery.img
It is worth noting, that it IS case sensitive, meaning if your file is called Recovery.img, you must type the capital R...
Other things you would flash:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
These will flash the system image (ROM) and boot image (kernel) as you would if you were returning to stock.
A full guide to returning to stock can be found here: [TUTORIAL][GUIDE][HOW TO] Flash Factory Images || Unroot || Relock bootloader by @Mr hOaX
You can also boot into a recovery.img without flashing it...
Code:
fastboot boot c:\users\rootsu\desktop\recovery.img
which is "fastboot boot" (what to do) "c:\users\rootsu\desktop\recovery.img" what to do it with. As you may have noticed, we did not define the recovery partition in this command, that's because we're not flashing it....
OK Gimme some useful adb commands please!
At the moment, we are going to assume you have a custom recovery and you have booted into recovery. The reason for this is using adb in recovery can be much simpler.
Here are some useful scenarios for using adb.
Backup your sdcard to your PC
Code:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
**Please note, some recoveries may "mount data" automatically on boot, so don't be disheartened if you get an error stating device or resource busy. This probably just means you can't mount what is already mounted**
/data/media/0 is the real location of /sdcard for your information. Also referred to as "The mount point". What we have done here is "adb pull" (what to do) "data/media/0" (what to move) "c:\MyBackup" (where to move it to)
Push a zip file from your PC to your sdcard (useful if you wiped your sdcard and rom)
Code:
adb shell
mount data
exit
adb push c:\rom.zip data/media/0
What we have done here is "adb push" (what to do) "c:\rom.zip" (what to move) "data/media/0" (where to move it to)
You can of course also use adb to push and pull files to and from /system too. You just need to:
Code:
adb shell
mount system
exit
I mentioned earlier that using custom recovery is much easier for adb than whilst booted into Android. You need to ensure you have a kernel that allows insecure adb before you do anything with system and data partitions. You also need to ensure that USB debugging has been enabled in developer options.
For example, to mount system to pull files whilst android is running you have to:
Code:
adb root
adb shell
mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system
...which is clearly a little bit more involved, so I recommend you use recovery for adb push and pull. You can find more detailed information on adb here: http://developer.android.com/tools/help/adb.html
A little more about using Windows command prompt
One thing to understand is that like Windows, command prompt (cmd.exe) works with directories (or folders if you like). The Linux and Mac terminals are the same, but most linux users, we expect you would already know this.
Here you will see I have downloaded a recovery image that I want to flash using fastboot.
As you can see, the recovery.img is located in C:\users\rootSU\Desktop
Usually when you open the command prompt from the start menu, or run command, the command prompt will default to your user location as seen below:
So lets try and fastboot flash recovery recovery.img...
It fails with a not-too-accurate error message. It has failed because you have not told it where the recovery image is. It assumes it is in the directory as listed in the prompt
So, how do we deal with this? Well, there are 3 ways.
1) We tell the command prompt where the recovery.img actully is in the command itself
Success! As you can see, we have told the command that the location for the file is Desktop\recovery.img
2) We can change the directory in command prompt to the directory where the file is. In this example, we change directory to "Desktop". The change directory command is "cd " or in this case "cd Desktop"
3) ...and possibly the simplest method. We hold shift whilst we right-click on the folder we want to change directory to, and directly open a command prompt there:
Another point to make with command prompt or terminals, is if you do a particular command, it is "pre-programmed" to "expect" a particular format of that command.
For example, we know that adb push as a command expects after it . This means the command is actually
Code:
adb push
BUT if you put something AFTER , for example -
Code:
adb push somethingelse
, it will assume that the "somethingelse" is a bad parameter, and the command will fail. It will probably display (or "print" which is the technical term in a terminal) a helpful guide of how the command should be used instead of trying to run the command which it does not understand.
You're probably wondering why I am telling you this. Well quite simply, it is a warning about folder names. Imagine you have c:\users\rootSU\My Documents as a folder. You assume the command is then
Code:
adb pull /data/media/0 c:\users\rootSU\My Documents
but it is not... There is a space in between My and Documents. What you have actually done is
Code:
adb pull Documents
because it uses a space to signify the end of a command or parameter. It is best to avoid using folders with spaces in them. Avoid as much as you can. In the event it is unavoidable (Although when is it ever>) then please surround the path with quotation marks,
Code:
adb pull /data/media/0 "c:\users\rootSU\My Documents"
so that way, it sees everything between the " " as a single parameter.
Myth Busters
Myth 1: You need USB debugging on to use adb and fastboot
If you cannot boot into Android, it doesn't matter. You DO NOT need USB Debugging turned on to use adb outside of android. USB Debugging is an Android ONLY setting. Fastboot obviously also does not need debugging either as this too is outside of Android
Myth 2: to adb push or fastboot flash files, they must be in the same folder as adb or fastboot executables. Sorry but this is rubbish. You can pass the full path of the image you're flashing or file you're pushing in the command and fastboot / adb can be called system wide if you've set them as an environment variable or used the 15 second installer

thanks(im out of thanks). but ill be back to leave one here!!!!!

simms22 said:
thanks(im out of thanks). but ill be back to leave one here!!!!!
Click to expand...
Click to collapse
No worries. Just putting it here for info. It's not a new work, just a slightly amended version of my N5 thread. No need for thanks

rootSU said:
No worries. Just putting it here for info. It's not a new work, just a slightly amended version of my N5 thread. No need for thanks
Click to expand...
Click to collapse
it was up in the n5 threads before, and was needed here. but its here now as well, so thank you

Good guide. Needs to be a sticky. In fact, I think every device general forum should have a sticky like this. Would have saved me a lot of grief back when....

Excellent update.

Very good to see. I'm sure lots of people will be sending noobs here for the basics.

Up to your usual helpful, good work I see.

rootSU said:
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide (to which again, you should answer Y)... This then allows you to type adb commands in the command prompt without having to open a particular directory first. You may or may not understand what I mean when I say that, but take it from me, its much more convenient and easier to use this way.
Click to expand...
Click to collapse
Y option = System-wide = install to "C:\adb" and add path for system variable - This mean you can use it by any account on your pc.
N option = Current user only = install to "C:\Users\[YOUR USERNAME]\adb" and add path for user only - Only user account used for installation can actually use it.
So if you say Y or N you will be still able to use it from any directory with cmd.
rootSU said:
It will also ask if you want to install device drivers. Actually, say N to this as we're going to cover that next, using the google USB drivers
Here is a link to the Google USB Driver: DOWNLOAD THIS
Click to expand...
Click to collapse
Drivers in my installer are the one from the link you posted here. I'm not using any modified drivers, just the one that come with SDK. And they are also digitally signed.
I hope you will fix these But still nice work, beginners should understand it :good:

Snoop05 said:
Y option = System-wide = install to "C:\adb" and add path for system variable - This mean you can use it by any account on your pc.
N option = Current user only = install to "C:\Users\[YOUR USERNAME]\adb" and add path for user only - Only user account used for installation can actually use it.
So if you say Y or N you will be still able to use it from any directory with cmd.
Drivers in my installer are the one from the link you posted here. I'm not using any modified drivers, just the one that come with SDK. And they are also digitally signed.
I hope you will fix these But still nice work, beginners should understand it :good:
Click to expand...
Click to collapse
Thanks for the info. I thought system wide meant it was putting it as a path environment variable. Reason I didmt use the drivers from your tool originally is (well I wrote this thread for N5 originally) they didnt work so had to install the universal naked driver. But if yours are the same as the ones linked, I can update that.

rootSU said:
Thanks for the info. I thought system wide meant it was putting it as a path environment variable. Reason I didmt use the drivers from your tool originally is (well I wrote this thread for N5 originally) they didnt work so had to install the universal naked driver. But if yours are the same as the ones linked, I can update that.
Click to expand...
Click to collapse
Path is added in both cases.

Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?

papeshfoo said:
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
Click to expand...
Click to collapse
Can you be very specific with your issue please?

papeshfoo said:
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
Click to expand...
Click to collapse
Android M no like root, you'll either have to live with stock or wait for chainfire to do his thing.

This all worked well until I had to find my device in the cmd prompt. It listed no devices when I typed in "ADB Devices". The issue I found was with the ADB Interface Driver. I uninstalled it and reinstalled it thinking it might've been a driver issue, but it still wouldn't work. I tried the "Uninstall driver" then "scan for hardware changes" but that didn't work. Finally I found the universal ADB driver and tried using that. STILL nothing. I figured that, because I don't have my device's driver installed, it might've been that, so I tried to DL it and yet again, nothing. I have a Kyocera Hydro Life, if that helps. Also, I tried looking through the "update driver manually" in order to update the driver software by looking through the different ADB interfaces that it had but my Kyocera driver wasn't there. Is it supposed to be there or do I just use one of the ones provided?
I checked my programs and apps and it says that the Kyocera usb driver was installed. Did I do something wrong?

ScottyChaos said:
This all worked well until I had to find my device in the cmd prompt. It listed no devices when I typed in "ADB Devices". The issue I found was with the ADB Interface Driver. I uninstalled it and reinstalled it thinking it might've been a driver issue, but it still wouldn't work. I tried the "Uninstall driver" then "scan for hardware changes" but that didn't work. Finally I found the universal ADB driver and tried using that. STILL nothing. I figured that, because I don't have my device's driver installed, it might've been that, so I tried to DL it and yet again, nothing. I have a Kyocera Hydro Life, if that helps. Also, I tried looking through the "update driver manually" in order to update the driver software by looking through the different ADB interfaces that it had but my Kyocera driver wasn't there. Is it supposed to be there or do I just use one of the ones provided?
I checked my programs and apps and it says that the Kyocera usb driver was installed. Did I do something wrong?
Click to expand...
Click to collapse
Try a different USB port. If that doesn't work try a different USB cable. If that also doesn't work, you could try disabling driver signature checking for Windows.
If those don't work, try this thread > http://forum.xda-developers.com/showthread.php?t=1583801

cam30era said:
Try a different USB port. If that doesn't work try a different USB cable. If that also doesn't work, you could try disabling driver signature checking for Windows.
If those don't work, try this thread > http://forum.xda-developers.com/showthread.php?t=1583801
Click to expand...
Click to collapse
EDIT: I also forgot to mention that the error code that came up while I was in the dev manager was compatibility error code (28) when I clicked on "Device ADB interface".

ScottyChaos said:
EDIT: I also forgot to mention that the error code that came up while I was in the dev manager was compatibility error code (28) when I clicked on "Device ADB interface".
Click to expand...
Click to collapse
Error 28 means drivers not installed. Try the driver help thread that I linked above.
---------- Post added at 12:33 PM ---------- Previous post was at 12:04 PM ----------
cam30era said:
Error 28 means drivers not installed. Try the driver help thread that I linked above.
Click to expand...
Click to collapse
@ScottyChaos,
Just a fundamental question: I assume you have enabled "Developer Options" in Settings, and then checked "enable USB debugging"?
---------- Post added at 12:39 PM ---------- Previous post was at 12:33 PM ----------
[/COLOR @ScottyChaos,
Here is a thread that you might find interesting > http://forum.xda-developers.com/android/help/metro-pcs-kyocera-hydro-life-rooted-t2870678

Windows 10 device driver management is even more locked down then windows 8. I got two of the three drivers loaded but when going into adb mode on the phone through recovery it just disappeared out of the device manager. I had to unplug and plug in while in that mode to trigger a unloaded driver in the device manager. Once there I had to force the adb driver manually with the nasty windows driver warning and all. Once I did that I could see the device in adb mode and sideload my marshmallow OTA. woot!

I decided to drop a thanks bomb...
ADB is good.
But that fastboot.
Seriously, its ONE command. OK, a few different arguments to use.... But it is so easy, and so powerful. People are afraid to mess up on command line, but its actually way harder to type the wrong thing out then to click the wrong thing.
LEARN IT. Forget your toolkit.
You can fix almost anything, Its not too hard for you. It may be new... YOU CAN DO IT.
Also, I have to say it... Its not going to help anyone, but it will keep me from punching something. ADB and Fastboot... Not the same. You don't ADB a new system image....