Hi!!!
I was using aura rom on my device, but i flashed back the SBF of FROYO!
After the update, my WebTopMod doesn't work anymore.
I was using this config:
Rom: Aura 1.2.1.3
Kernel: Faux`s 0.2.0 Stock
Baseband: N_01.77.33P
Webtop: WT-1.2.0-110
Now i'm using
Rom: Stock Froyo 2.2
Kernel: Stock
Baseband: N_01.77.07P
Webtop: OSHWT_U1_6.46.0
When i connect the atrix to the dock, the WebTopMod doesn't be show on the list. Why?
if you flashed using SBF method everything was overwritten, there fore you loose any hacks/mods/settings. i am trying to work this outright now, ive tried a couple different sbfs which im sure have webtop, but am experiencing exatly your same problem. you would think if you flashed back to stock then webtop would work.
Ive done a check and the apk files required to show the webtop option when docking are not in the system/app folder this is why the option does not appear.
there probably is a way to manually inject the apk ad change the perms but im after a more natural way to solve this. i wan tto jsut have a stock atrix rooted with webtop at the moment this appears impossible.
the reason for me wanting this set up over some nija mixxed up crazy awesome rom is that battery life. when running any of the other rom avaialble (i mean ANY!) theyre all screwed up an battery life is around 3hrs. stock froyo works like a dream. but as you say no webtop!
hopefully ill find a cure tonight.
edit: nm disregard
I've executed some erase fastboot commands, like CACHE, USERDATA, WEBTOP, PREINSTALL, -W, etc...
If we try to install webtopmod hack to use webtop without dock?
I've not tried any mods at all not really bothered about modding the webtop my ideal setup would be
Stock rooted atrix froyo on latest available build (not 1.3.1 orange uk, I'm currently on 2.1.1 Froyo). With working Webtop. No hacks just regular good old webtop working as it should out of the box.
I think I may have found a rom and fix for the crazy CPU issues but tph I'm more interested in just having a reliable phone with webtop and root for screen shots etc. Pretty low end request really not sure what I'm missing!!
Sent from my MB860 using Tapatalk
I see what your sayin tho filipe. However if I can go a stock as possible with this phone ill be a happy bunny.
Sent from my MB860 using Tapatalk
I remember that i've changed some files in webtop to work with debian disk...
There's a way to CLEAN ALL WEBTOP FILES and install it again?
Thx for the information! By the way what is TPH?
Probl meant to write tbh (to be honest)
Let us know if there is a fresh way to install webtop. And wether its linked to the build of android we run? Would we be able to flash a newer webtop from an gingerbread build to a froyo device?
Sent from my MB860 using Tapatalk
I will wait... if you know a way to correct this, let me know! =]
Stock Froyo 2.2.2
Hi guys
Fenny developed these for me, mine is on stock Froyo 2.2.2 (4.4.80.M860)
I did root my device, and copied the 2 files manually, and rename the other to .odex files to .bat.
Hope it works for you!
All credit to Fenny!
Cheers I'm trying it now, the question still remains why doesn't webtop work out of the box when flashing a stock froyo sbf I even made sure it was the full sbf not the service variaty
Also should I drop in system/app with no permission change
Ok trying now renamed existing .odex-.bat and existing .apk-.odex
Ok nothing happens and renaming the files doesn't put it back to how it should be. Is olyem_u4_2.1.1 (froyo 2.2.2) sbf latest for uk atrix? This is what I'm running ATM. Just flashing it again as we speak. I'll keep looking this is a nice Rom fast and smooth, and contrary to what allot of pol say i think blur is good.
Not great but good.
This works for me too!
Thx Guy!
Solved! =]
ninjalandpirate;[URL="tel:18726482" said:
18726482[/URL]]Ok nothing happens and renaming the files doesn't put it back to how it should be. Is olyem_u4_2.1.1 (froyo 2.2.2) sbf latest for uk atrix? This is what I'm running ATM. Just flashing it again as we speak. I'll keep looking this is a nice Rom fast and smooth, and contrary to what allot of pol say i think blur is good.
Not great but good.
Click to expand...
Click to collapse
Try to rename DockService.apk.bak instead DockService.apk. And PortalApp.apk to PortalApp.apk.bak!
Rename the .obex files to .obex.bak too!
Restart your phone, enter o webtopmod... wait a moment (5 minutes max...) and restart your phone and try again!
Works fine for me, and i'm writting from webtopmod!
Filipeknot said:
Try to rename DockService.apk.bak instead DockService.apk. And PortalApp.apk to PortalApp.apk.bak!
Rename the .obex files to .obex.bak too!
Restart your phone, enter o webtopmod... wait a moment (5 minutes max...) and restart your phone and try again!
Works fine for me, and i'm writting from webtopmod!
Click to expand...
Click to collapse
Cool, glad it helped
Do you mean I should rename the original files or the files I am dropping in there?
Cheers
Sent from my MB860 using Tapatalk
Rename the original files for backup purpose!
First of all, try to reboot your phone and replace files while phone starts.
Reboot, replace and set permissions! Reboot again and enter on webtop. Wait a few seconds and reboot again and enter on webtop!
=]
Ok im deffinatly lost now. Im fine with copying the files in there but how should I change permissions, I've heard of doing it via adb, im guessing thats what u mean when u say doi it before the phone starts up.
Ill have another shot at it this eve. If anyone has any adb comand tips im not sure how.I would change perms. (Im ok with setting up and usin adb (there are flook many threads about adb use on the net.)
Sent from my MB860 using Tapatalk
Related
ok, typically i've had no problems installing custom roms. i put rubix on here last night and really don't like it that much. well, my sd card crashed somehow also so i lost all my backups. so, i went into rom manager and was going to reinstall zapx. it went through all the functions and now i'm stuck on the rubix boot screen. it just keeps reloading... i was rooted with 2.2, so what do i need to do now? please help asap. i really need my phone today!!!!
edit:
ok so from looking around i've found that i need to flash the sbf file using rsd lite 4.8. ok so i dl'd rsd no problem. i dl the sbf file and click to open and it doesn't work. i tried to "use rsd" to open and still nothing... am i missing something on my pc to run this sbf file?
edit #2:
so i got the sbf file to run in rsd... install went good and fast. phone boots up to "welcome to droidx touch the android to begin", i touch it and nothing happens... just flashes. emergency dial won't work, change language does work... thats it... please help!!!
LAST EDIT:
got it figured out... was looking in the wrong place for the file... soooo, nevermind to all help... oh wait....................
brandon2x said:
ok, typically i've had no problems installing custom roms. i put rubix on here last night and really don't like it that much. well, my sd card crashed somehow also so i lost all my backups. so, i went into rom manager and was going to reinstall zapx. it went through all the functions and now i'm stuck on the rubix boot screen. it just keeps reloading... i was rooted with 2.2, so what do i need to do now? please help asap. i really need my phone today!!!!
edit:
ok so from looking around i've found that i need to flash the sbf file using rsd lite 4.8. ok so i dl'd rsd no problem. i dl the sbf file and click to open and it doesn't work. i tried to "use rsd" to open and still nothing... am i missing something on my pc to run this sbf file?
edit #2:
so i got the sbf file to run in rsd... install went good and fast. phone boots up to "welcome to droidx touch the android to begin", i touch it and nothing happens... just flashes. emergency dial won't work, change language does work... thats it... please help!!!
LAST EDIT:
got it figured out... was looking in the wrong place for the file... soooo, nevermind to all help... oh wait....................
Click to expand...
Click to collapse
I personally like it when I get to take both sides of the conversation. I usually agree with myself (usually).
Glad you figured it out.
yeah that was fun. i'm learning sooo much about these things. it actually makes me happy when i figure it all out on my own without having to wait on answers... after all the messing with roms and everything, now that i have the 2.2 ota sbf installed, i re-rooted and its running great. not sure i'll even put a different rom on anymore. no need really. i'm overclocked and i hit a 1665 quadrant score. rubix was great except the camera app. even with the 8mp fix on the cam and 720p fix on camcorder i just hate the way it doesn't use the widescreen effect like on the stock camera... thats my 2 cents about my situation today!
I have got CM7 to boot on my Captivate using some of the same methods used to boot the stock Gingerbread ROM. I have had a lot of questions about it, so I figured I would post what I did in one location and once I (and others) start to play more, findings can be posted here.
I take credit for nothing... All I did was switched around a couple files to boot CM7 instead of GB.
Requirements
You must be root on your phone
Your /data must be converted in Ext4 by Voodoo lagfix or another Ext4 lagfix.
You must have proceed to complete backups before
Some busybox installation is also useful for tar.
Another Important note
Be absolutely 100% sure you have access to the download mode using the 3 buttons combination.
If you don't, it will be extremely difficult (even if in theory not impossible) to to flash another kernel back.
Steps:
1: Download CM7 dump to SDCARD:
2: Run the following via ADB
Code:
adb shell
su
cd /data
mkdir gingerbread
cd gingerbread
busybox tar zxvf /sdcard/CM7.tar.gz
busybox cp -a /efs efs
sync
reboot recovery
3: Flash attached "I9020_reoriented_alpha_1223.zip" via CWM Recovery
Watch CyanogenMod 7 boot on your phone!
How do I get back?
This is a dual-boot setup... Everything is still intact that you were running before this.
All you have to do is download and flash your previous kernel via ODIN. Once you do this, the phone will reboot into Froyo. Simply reinstall the I9020_reoriented_alpha_1223.zip and your back on CM7 again, just like you left it. MAGIC!
What's about this port:
- It uses the Nexus S kernel compiled from sources by supercurio that has been reoriented for the Captivate by xcaliburinhand
- It runs the exact /system image release, that I pulled from a CM7 alpha .zip file posted in the NS forums.
Which filesystem?
This is simply a mod of supercurio's early gingerbread preview, so it runs on Ext4. no RFS at all, the kernel don't support RFS.
Does everything work ?
No; will update as I discover more of what does and doesn't work.
KEEP IN MIND
CyanogenMod ROMs do not come with any Gapps and using this method, you will not be able to access CWMrecovery to flash the Gapps files floating around. I hope to have an answer to getting Gapps installed with ease by late tonight.
For now; I'm going back to work,
Thanks for all the devs who did this hard work in such a short period of time... please donate to them. I have contributed nothing thus far!
DOWNLOADS:
Dropbox: CM7.tar.gz
Dropbox: I9020_reoriented_alpha_1223.zip
Reserved for OP
What a tease. Atleast say whether or not stuff works.
I am interested though.
b0bfath3r said:
What a tease. Atleast say whether or not stuff works.
I am interested though.
Click to expand...
Click to collapse
+1
please report anything not working with this rom.
Uploading files to cut down on the amount of directions... had to manually add AT&T APN, but I was getting good network upload/download and voice... haven't tried much more than that, just got it booted about 2am last night and had to go to work at 8am... so I flashed back to GB; will be right back on this as soon as I get home this evening.
inneyeseakay said:
Uploading files to cut down on the amount of directions... had to manually add AT&T APN, but I was getting good network upload/download and voice... haven't tried much more than that, just got it booted about 2am last night and had to go to work at 8am... so I flashed back to GB; will be right back on this as soon as I get home this evening.
Click to expand...
Click to collapse
curious to see your results for
WIFI, GPS, Accelerometer???
also could you post link for the CM7 dump.
bames said:
curious to see your results for
WIFI, GPS, Accelerometer???
also could you post link for the CM7 dump.
Click to expand...
Click to collapse
More than likely... anything not working on Gingerbread won't be working here either... these ports are going to be using the same kernel, for now.
What modem did you use?
I have been using JK4....
...Download links are live!
The dump will have the look and the feel. The kernel is like the engine.
Sent from my SGH-I897 using XDA App
msm903 said:
The dump will have the look and the feel. The kernel is like the engine.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
...and we're dropping a Corvette engine into a Camaro... both V8 w/lots of similarities; a lot of things bolt up, but it will take some tweaking to get everything working perfect.
inneyeseakay said:
...and we're dropping a Corvette engine into a Camaro... both V8 w/lots of similarities; a lot of things bolt up, but it will take some tweaking to get everything working perfect.
Click to expand...
Click to collapse
very well explained
inneyeseakay said:
...and we're dropping a Corvette engine into a Camaro... both V8 w/lots of similarities; a lot of things bolt up, but it will take some tweaking to get everything working perfect.
Click to expand...
Click to collapse
Pretty sure they moved to the nexus s kernel source and just bolting mods on now, breaking stuff on the way...
We have full source for the Nexus S, kinda confused as to why they are so bent on using AOSP and porting code over to make it the same kernel... seems like a lot of extra work for no reason to me.
Gapps
I'm testing a method I came up with to install gapps right now, it might take a while but hopefully it'll be quick and easy. I'll report back if/when I get results.
This dual boot thing is MADNESS!!! (In tone of 300) hahaha.... Gotta try this when I get home.!
My i897 just need VolUp+Pwr to enter Recovery mode,
and VolDn+Pwr to enter Download mode.
To get out of any trouble,
don't flash any bootloader, and exclude(delete) any bootloader inside any update(whatever).zip
Normally you don't need to flash or update bootloader.
However, if your phone lack of 3butt comb.,
flash a i9000 bootloader then you will have better access to Recovery and Download mode.
If anyone wanna try this NS rom,
be sure to make backup of /efs.
It store your imei, product code and all identification data,
and this partition use RFS which NS doesn't use.
johan8 said:
My i897 just need VolUp+Pwr to enter Recovery mode,
and VolDn+Pwr to enter Download mode.
Click to expand...
Click to collapse
This won't work when running this ROM
johan8 said:
If anyone wanna try this NS rom,
be sure to make backup of /efs.
It store your imei, product code and all identification data,
and this partition use RFS which NS doesn't use.
Click to expand...
Click to collapse
If you read the first post, you will see that a backup of efs is created in the ADB commands.
Haven't has a chance to check the market yet, I've been out. I should be home before too long.
Sent from my GT-I9000 using XDA App
so I tried it.. but no Gapps installed. no market. I guess i need to do soem more research.
msm903 said:
so I tried it.. but no Gapps installed. no market. I guess i need to do soem more research.
Click to expand...
Click to collapse
Read the first post... It's all stated right there...
Working on it now... been fighting with an SMS problem for the last two hours; come to find out it's a network/carrier issue, not ROM related. Ugh...
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
willjohnson said:
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
Click to expand...
Click to collapse
try here http://rootzwiki.com/index.php/Smartphones/Motorola/Droid-X/Droid-X.html#comment220 scroll down towards the end (idk if you use windows or linux but the linux method of sbf'ing is alot easier ive used both) except in their directions it says an older sbf file just insert the one you have, then go here http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html to download these zip files for kernel updater, 340 system update your baseband and bootloader should already be the correct ones, (i recently bought my X too) then once you finally root your newly sbf'd X and installed droid x bootstrap etc and get into clockwork mod recovery you can flash those 2 zips (recommend flashing only one at a time, reboot, and do the next) and then you should be updated to full .340
gl
http://forum.xda-developers.com/showthread.php?t=869007
heres a thread with discussion about those update zips
Thanks for the quick replies. Gonna try your suggestion tonight or tomorrow. Now i get random lock ups followed by a boot after about five minutes. The only upside right now is that its 4 days old so if i can get some resemblance of factory back on it then i can just exchange it Thanks again will report back with results.
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
willjohnson said:
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
Click to expand...
Click to collapse
correct tho the one i used had was labeled VRZ_MB810_2.3.32_1FF_01.sbf
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Ok, so now i am starting to worry. Tried 3 different .320 full sbf's. All the same result. Failed process close to the begging. Then on the phone it says
Critical Error
FEBE
0047
Please Helppppp. I don't need a really expensive paperweight, all i need to do is get it so that GummyJar doesn't show on boot and i can take it back, its brand new.
Try removing the battery. Then boot into recovery (volume down + power) then do a factory reset/restore.
Sent from my ADR6300 using XDA App
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
willjohnson said:
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
Click to expand...
Click to collapse
ive heard there are several problems with rsd lol thats why ive stuck with my ubuntu/Linux its 10x easier
willjohnson said:
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Click to expand...
Click to collapse
i also believe you DO have to have it all in specific locations but idk i use linux to do it, if you continue to play with the X after u get new one i would read up on how to dual boot ubuntu its a whole lot easier once you find ur way around i have it booting off of a 1TB external hard drive no need to install the correct moto drives etc..just plain easy lol
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
willjohnson said:
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
Click to expand...
Click to collapse
it only takes once correctly doing it to feel comfortable lol also make sure using droid x bootstrap recovery make sure to tap the first choice and let it do its thing, otherwise it will constantly reboot to recovery EVERY time you turn it back on
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
willjohnson said:
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
Click to expand...
Click to collapse
try something blurless like darkslide, which im currently running, no random reboots
Funnyface19 said:
try something blurless like darkslide, which im currently running, no random reboots
Click to expand...
Click to collapse
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
willjohnson said:
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
Click to expand...
Click to collapse
Well I haven't overclocked yet anyway the phone gets hot enuf lol plus coming from an Eris 1k is fast lol
Um yeah it should be wright depends on what the blur clock looks like lol
Sent from my DROIDX using XDA App
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
willjohnson said:
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
Click to expand...
Click to collapse
yeah but the obsidian rom is completely blurless just not everything working
Running DarkSlide4.1 can't tell u last I had a reboot
Sent from my DROIDX using XDA App
i currently have 4.4 on my phone, but was wondering if i can just install 4.5 over it with out wiping anything so i can keep my kernal and all apps and screen layout
Thank you in advance
enigma7820 said:
i currently have 4.4 on my phone, but was wondering if i can just install 4.5 over it with out wiping anything so i can keep my kernal and all apps and screen layout
Thank you in advance
Click to expand...
Click to collapse
you should be able too but you will have to reinstall your kernel but you should have asked this on ROMS thread
I did that and the wireless was not working so i recommend to do a complete wipe so you can make sure you dont have problems trust me on the long run its better.
enigma7820 said:
i currently have 4.4 on my phone, but was wondering if i can just install 4.5 over it with out wiping anything so i can keep my kernal and all apps and screen layout
Thank you in advance
Click to expand...
Click to collapse
You'll save more time by wiping, believe it or not. A lot of little issues may pop up if you don't.
Do this... Make a nandroid of your 4.4 setup, then try flashing over it with 4.5. If you have problems, either go back to your 4.4 nandroid, or wipe and start over with a fresh flash of 4.5.
thank you for the quick responses i had to wipe every and it is working great average of 40mflops
some questions
I am only a few days old to the flashing a ROM to the HTC Evo but I feel I have a pretty good hang of things. I have the following things:
4.5 Mikfroyo (installed last night after finally reading enough to upgrade to the 4.5)
netarchy 4.3.1-cfs-havs-nosbc flashed
the sdreadahead-512.zip installed for faster SD card speeds ( if you want to try it out... http://www.goodandevo.net/2011/02/h...c-evo-even-faster-than-previous-mod.html#more )
but what i am trying to accomplish now is getting the Vanilla lockscreen to work on my phone. I have read that the 4.5 update seems to have the lockscreen within the ROM already, that I just need to delete or rename the htclockscreen.apk within the system/app folder with the Root Explorer app. Here is my issue though: I have changed the Root Explorer to r/w and have located the file from root--->system-->app--->htclockscreen.apk. If I tap on the file it asks me to install/ view/ or cancel. But I thought it was already installed on the system already? If not, do I need to install it, then delete it? That sounds outright silly but then again some stuff is just that way. I have renamed the file and rebooted but, again, to no success. I know that there was a person asking the same question but I guess I could not understand their conversation enough to know how to follow as they did.
Also, just a general question. why is the 4g toggle missing in the notifications bar now? that was kind of handy for me. oh well, i guess i can just use the HTC toggle on a page instead.
Last question, i would like to flash a new theme to the ROM (white version http://forum.xda-developers.com/showthread.php?t=853050) But when I downloaded it, set it to the SD card, went into recovery, flashed it, and rebooted, the HTC splash screen (white screen) just stayed on forever. I had to restore from my backup, thank god I knew to do that before hand, and just kept the stock theme with MikFroyo. what could I be doing wrong?
I also am having a problem with the lock screen but mine is a little different. When i boot up and unlock phone for the fisrt time. I get a forced close error. Other then that everything in 4.5 is working good so far
btf6df said:
but what i am trying to accomplish now is getting the Vanilla lockscreen to work on my phone. I have read that the 4.5 update seems to have the lockscreen within the ROM already, that I just need to delete or rename the htclockscreen.apk within the system/app folder with the Root Explorer app. Here is my issue though: I have changed the Root Explorer to r/w and have located the file from root--->system-->app--->htclockscreen.apk. If I tap on the file it asks me to install/ view/ or cancel. But I thought it was already installed on the system already? If not, do I need to install it, then delete it? That sounds outright silly but then again some stuff is just that way. I have renamed the file and rebooted but, again, to no success. I know that there was a person asking the same question but I guess I could not understand their conversation enough to know how to follow as they did.
Click to expand...
Click to collapse
Long press on the .apk, a menu will pop up, then click rename from there. Just did it yesterday and it worked fine. I just added .bk at the end (htclockscreen.apk.bk)
As for the 4g missing in the pulldown menu, you can learn how to change it here (taken from the mikfroyo thread) http://forum.xda-developers.com/showthread.php?t=877003
thank you Bamba, the lockscreen is now operational and wonderful!!! always have wanted this lockscreen! (Guess it is true, the grass is always greener on the other side.)
as for the missing 4g toggle, i kimd of understand the thread but i will read over it one more time so that i do not mess anything up.
Thanks again!
enigma7820 said:
thank you for the quick responses i had to wipe every and it is working great average of 40mflops
Click to expand...
Click to collapse
What kernel are you using if you dont mind me askin?.. and are you using SetCPU or anything?.. Juice defender type stuff?..
I was just wondering cuz I have 4.5 w/ the stock kernel and only get about 28-29 most of the time... not that it really matters, but it does seem a little sluggish goin from app to app.... thanks
i have since switched to vp 3.0 remastered, and is by far in my experience the best rom i have every used. everything is working good for me so far and since falling in love with LP this is the rom for me. I am using the latest radio and pri 1.77 and sbc-net 4.1.9 no havs and it is amazing, really fast. So far I have been on this rom and kernel for 18 hours sitting at 71%. I am going to make a detailed video and post a link to it here and for youtube.
New to mikfroyo,Had cynaogenmod cm7 on evo with cricket.worked ok.3g did.Friday i had it flashed back to sprint.Put cyanogen back on it.worked great.EXCEPT the 3g would go back to 1x. So put 4.5 mikfroyo. and it works great.So my question is were do you get the updates for mikfroyo? cyanogen released nightly builds.Is there a site or info on updates?Also is there a 2.3 android mikfroyo out?
Check themikmik.com
Sent from my PC36100 using Tapatalk
REQUIREMENTS:
Please Nvflash to 3588 (VERY IMPORTANT)
Here's a link for instructions of 3588 by roebeet
http://forum.xda-developers.com/showthread.php?t=861950
Releasing an alpha version for xda-members to experience Honeycomb in their GTABS. First and foremost, thanks to Roebeet, MrGUY, DJ_Steve, pershoot and the rest of adam devs who helped us port Honeycomb.
WARNING:
This will update your bootloader to 1.2 version (need to be on 3588 for this combo to work)
Whats working..
1. Wifi, BT
2. Touchscreen
3. buttons
4 Browser, Gmail
5. Market
6 gapps
What is not working..
1. OpenGL
2. Camera (because of OpenGl)
3. No flash yet
Link..
https://rapidshare.com/files/541902742/Roebeet_ClemsynHoneycombo.alpha.zip
******* YOU NEED TO BE ON 3588 STOCK and STOCK RECOVERY (NO CWM) BEFORE FLASHING THIS COMBO******
INSTRUCTIONS #1
1. Nvflash to 3588 STOCK DO NOT USE CWM FOR 3588
2. Do not install CWM (we need the stock recovery)
3. DO NOT INSTALL CWM (we need the stock recovery)
4. PLEASE DO NOT INSTALL CWM
5. Reboot
6. RENAME COMBO FILE NAME TO Update.zip
7. Move Update.zip to /sdcard folder
8. Unzip recover.zip and move recovery folder to /sdcard folder
8. Turn off
10. Press Power+Volume up then this will install Update.zip
The reason we don't install CWM for 3588 is because this won't install the bootloader
Instruction #2
1. Rename Combo file to Update.zip and place in /sdcard folder
2. Unzip recovery.zip and put recovery folder in /sdcard
3. Update to NVFLASH to 1.2-4349 using this image
http://www.mediafire.com/?g7vorg66iiq29vm
4. Enter recovery by pressing Power Button+Volume up
IF YOU WOULD LIKE TO GO BACK TO FROYO AND STAY IN 1.2 bootloader here is a link for my Combo version 6
https://rapidshare.com/files/1095733302/Clemsyn_Caulkinver6.zip
BTW, if you like our work, buy us a beer
I am currently running gojimi vegan ginger rc1. What will I have to do if I want to go back,and how are storage partitions mapped on this Rom ?
cool! can't wait to try this. waiting patiently for rom to be uploaded and installation instructions to be posted...
Can't wait to finally try this when I get a few days off!
Question: After trying this and having the bootloader upgraded, will I be able to easily revert back to Clemsyn -Calkulin 1.5 with the new bootloader or will I have to nvflash?
I had to use nflash to go between the two bootloaders. My apps are usually remaining or you can use Titanium to get them back.
Awesome build running smooth already glad someone posted this here
Sent from my GTablet-HC using XDA Premium App
Thanks for posting it here Clemsyn. I really didn't want to sign up for another forum so I can ask question haha.
Anyways, when you say gmail is working, is it fully functional? I thought there were shader (or something like that) issues that prevented us to see the body of the email.
Also, is flash in the browser working?
Those are my two must haves if I am going to switch to HC.
Thanks in advance.
xmr405o said:
Thanks for posting it here Clemsyn. I really didn't want to sign up for another forum so I can ask question haha.
Anyways, when you say gmail is working, is it fully functional? I thought there were shader (or something like that) issues that prevented us to see the body of the email.
Also, is flash in the browser working?
Those are my two must haves if I am going to switch to HC.
Thanks in advance.
Click to expand...
Click to collapse
No flash yet. There is a hacked gmail.apk that works fine. I am using it now, and only flash is not working of everything I personally use. The devs are very close now.
I apologize for the delay, it wasn't done uploading yet and I needed to go to my kid's science project (he won 5th place). Just got home so I posted the link on first page. BTW, gmail is also fixed.
SirhanSirhan said:
No flash yet. There is a hacked gmail.apk that works fine. I am using it now, and only flash is not working of everything I personally use. The devs are very close now.
Click to expand...
Click to collapse
actually flash is technically working just fine...it's the opengl shader issues causing it not to display properly...opengl is also causing the gmail app issues (alt app in place as a temp fix, now) and opengl issues are causing a few other apps to have issues as well...once opengl is resolved then this will be a practically perfect build, imo been running it for about a week now with all the updating and love it!!
clemsyn said:
Releasing an alpha version for xda-members to experience Honeycomb in their GTABS.
Click to expand...
Click to collapse
Thanks clemsyn for sharing this, so whats the difference between this and Roebeets versions released on slatedriod ?
hey, clemsyn...when you get back online, I have a question for you. A lot of the current talk in the Adam dev chat is that a .36 or newer kernel will resolve many of the current issues (OpenGL specifically)...I was wondering if maybe you had a newer version kernel in the works or not for the gtab? If so, how's it coming along? If not, how tough do you think it would be to develop a .36 version of the kernel? Thanks for everything, man. Have a good one.
Is Dolphin HD working on this?
Thanks to clemsyn & roebeet for porting this from the Adam.
Stuck on boot
Hey Roebeet, its been awhile but I'm back and ready for HoneyComb. I folowed your directions. I used NvFlash to get back to 3588. I then installed CWM .08 and partitioned internal 2048 and 0. I put the zip on internal and installed via CWM. Now it hangs on the viewsonic white screen? Any Ideas?
Theres already a 2.3.32.40 overclocked kernal out. Is that not what you are wanting?
jlytle1234 said:
Theres already a 2.3.32.40 overclocked kernal out. Is that not what you are wanting?
Click to expand...
Click to collapse
it's 2.6.32.40...the 40 is the version number of the .32 kernel...they are looking for a x.x.36.x kernel to possibly resolve the issues with opengl...
acuralegendz said:
Hey Roebeet, its been awhile but I'm back and ready for HoneyComb. I folowed your directions. I used NvFlash to get back to 3588. I then installed CWM .08 and partitioned internal 2048 and 0. I put the zip on internal and installed via CWM. Now it hangs on the viewsonic white screen? Any Ideas?
Click to expand...
Click to collapse
Most of us got this issue. When reading on the other website it says to do wipe data after flashing so do that and see
Sent from my SGH-T959 using XDA App
Djapatos said:
Most of us got this issue. When reading on the other website it says to do wipe data after flashing so do that and see
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I think this guys issue stems from the fact that he installed cwm. This rom needs to be installed with the stock bootloader.
Well I have the same issue, I wiped, but nothing. When I flashed the file, it said unknown command bootloader, bla bla.
Pretty sure thats the issue, I was running 3588 ...dont know whats up.
I get the same results with the unknown command bootloader. I've tried wiping all data after the installing the rom and the gtab still gets hung up. This is coming from using nvflash to 3588 and a repartition.