Database Users

HSPL T-Mobile USA HD2?! please help!

hello i have an hd2 tmobile branded i cannot seem to hspl it because on 1024 i get usb conectiong failed but it does go on tri color screen and in hspl2 i get bad model id.
this is what i have on my tricolor:
PB81120 SS-B3
SPL-20.8.0000 8G XE
MICROP LED 0X05
MICROP TOUCH 0X40
PLEASE HELP =/
THANKS IN ADVANCE.

this is what you need my friend..
then you will be able to download the tmobile energy rom
http://rapidshare.com/files/368532303/HSPL2_1024_RUN.zip

HI,
I used the HSPL2_1024, selected the 2.0.0.8
After 10 min, of using Energy.Leo.23549.Sense2.5_TMobile_USA.Mar.26
I got an error, I recovered, but wondering what happened??

Just try it again. Make sure your drivers are all complete from Windows Vista or 7. Make sure you are running 6.1 Windows Mobile Device Center.
I am sure you have done this but make sure:
Plug in your phone make sure the drivers are good with Active Sync on.
When you get into HSPL2_1024 and let it run your device will be found again in USB mode. Just to make sure the drivers are loaded correctly.
Flash - reboot and then flash the Energy or whatever USTMO compatible cooked ROM you like. I think there are only 2/3 that work with the ROM 2.08
Sometimes it just takes retracing your steps to get it to work right.
good luck.

I didn't want to make a new thread for this and clutter up the board, I'm kind of a noob to XDA you see. I just bought a Tmobile HD2 and downloaded and applied the HSPL linked in this thread, it all worked fine. My problem is: Will installing the 2.09.51.03 radio on my tmous HD2 hurt it? Was the 2.09 radio meant for the htc hd2 which has a different radio?
My main goal is to get Artemis rom on it.
Thanks for your time.

Lazarpandar said:
I didn't want to make a new thread for this and clutter up the board, I'm kind of a noob to XDA you see. I just bought a Tmobile HD2 and downloaded and applied the HSPL linked in this thread, it all worked fine. My problem is: Will installing the 2.09.51.03 radio on my tmous HD2 hurt it? Was the 2.09 radio meant for the htc hd2 which has a different radio?
My main goal is to get Artemis rom on it.
Thanks for your time.
Click to expand...
Click to collapse
The .51 radios are meant for the European spec and will not work on a TMOUS based rom AFAIK.

yeah i have installed mobile center twice straight from microsoft, my phone is synced with it, i run the 1024 it says connecting 5 min later says usb connection failed my phone does go into the tri color screen with the USB at the bottom =/ please really help

S3BAZ10 said:
yeah i have installed mobile center twice straight from microsoft, my phone is synced with it, i run the 1024 it says connecting 5 min later says usb connection failed my phone does go into the tri color screen with the USB at the bottom =/ please really help
Click to expand...
Click to collapse
try different usb ports and remember to right click 1024 and 'run as administrator'

After using the HardSPL I could not get my phone to sync either... So Just put your phone into bootloader mode. Turn off phone, power button, volume down hold till tri color screen comes up. Then just run the RUU an it will flash your phone. Only NRGZ rom works.

richsark said:
HI,
I used the HSPL2_1024, selected the 2.0.0.8
After 10 min, of using Energy.Leo.23549.Sense2.5_TMobile_USA.Mar.26
I got an error, I recovered, but wondering what happened??
Click to expand...
Click to collapse
You have to choose. 2.0.0.8 HSPL

msmith1991 said:
this is what you need my friend..
then you will be able to download the tmobile energy rom
http://rapidshare.com/files/368532303/HSPL2_1024_RUN.zip
Click to expand...
Click to collapse
Would anyone happen to have a mirror to this link, or could some kind soul possibly upload it? This one seems to be broken. It would be greatly appreciated.
Update...I found it.

yeah notinh still not working ive tryed all ports, im running windows 7 64bit.

I'm recieving the same error. Windows 7 x64, MDC is latest 6.1. Tried from both laptop (Win7 x64) and desktop (Win7 x64). Phone goes into Tri color screen, says "USB" at the bottom. Windows notes new driver, updates, then HSPL2 for 1024 Leo gives "Critical Error" and bombs out. Bummer
UPDATE: Fixed it. Did a hard reset on the phone, tried again, and now HSPL flashed successfully. Now, on to the cooked ROMs

Worked for me on win 7 x64... No issue with HSPL2_1024_RUN file I got by browsing this site... It did freeze on me during RUU, but I just rebooted and ran it as admin whilst not touching any other program in windows until it was done and it worked.

zoth said:
You have to choose. 2.0.0.8 HSPL
Click to expand...
Click to collapse
I believe you are to choose 2.08 to install HSPL
And you choose 2.08.0000 when you want to uninstall HSPL, for warranty and such.

well i had done a hardreset before but nothing, i tryed it on my laptop and it worked fine, guess it was my PC =/, thanks anyways to all you who tryed to help.

S3BAZ10 said:
well i had done a hardreset before but nothing, i tryed it on my laptop and it worked fine, guess it was my PC =/, thanks anyways to all you who tryed to help.
Click to expand...
Click to collapse
Please change the Thread title by adding {Solved} or something like that to note that your issue has been resolved.

hi guys, I tried all of hspl2 (1024) version for TMO US htc HD2 but it does not work at all. Pls help me.
Critical error is showed up by hspl2
My Phone softare information;
OS 5.2.xxxx
Manila 2.5.xxxxx
Rom v 2.10.xxxx(82076) WWE
Radio 2.08.xxxxx
I still use stock rom which is TMO US's shipping rom
I checked whole Hspl2 (1024) but doent work, Pls help me,

Moved you over to General. HSPL questions should have been posted in the hspl thread already open buddy.
Peace,
Josh

ok. I'll do it. thank you

Help! Stuck with Windows Energy ROM on my HD2 Leo !

Hi, I have installed HSPL and attempted to load android on my HD2 Leo phone with the latest version. Once to Flashed the ROM my phone booted to a very basic Windows Mobile Energy O/S which keeps trying to boot to android. Once it starts booting android I just get a blank screen and everything freezes.
I am trying to restore my original O/S but even when I do a hard reset it still loads up Windows Energy. If I try and flash my original Windows Mobile ROM HSPL loads on the screen but it gives me a USB error connections.
So basically, Im stuck with this basic Windows Mobile Energy. Can anyone help (step-by-step if possible) with how I can restore the original Windows Mobile ROM onto my HD2 Leo. This problem is really stressing me out!!!
Thank you so much!

You should really make sure you know what your doing before you do it.
Ok, first check on your bootloader screen to make sure your device has hspl installed correctly.
download the normal windows mobile rom for your device, put your device in bootloader mode and connect it to the pc using the usb cable.
Run the ruu program.

When I load up the HSPL screen and connect through USB it just gives me a USB connection error. That's part of the problem

I am getting the same error too..Did any find got a solution for this????/

flash rom from SD card be easier if ur having USB problems,

yes try flashing the phone from the micro sd card but you need to use a smaller size card like a 1GB or so. enter bootloader and the flash will automatically start.
have you tried a hard reset?

You can find the method in here!
http://forum.xda-developers.com/showthread.php?t=611433
First post, how to uninstall
Its very easy!

*help!* frose at bootup screen

my phone wont bootup,frose when the htc logo and the text arive.what can i do? The phone is original..
i installed the original RUU now,but still the same..

beemerfanatic said:
my phone wont bootup,frose when the htc logo and the text arive.what can i do? The phone is original..
i installed the original RUU now,but still the same..
Click to expand...
Click to collapse
It would be nice if you could provide us with a little bit more information.
Have you installes hspl? if yes, which version?
Have you installed a Custom ROM while the device hang the first time?
What did you do afterwards. What do you mean with "installed original RUU"? Did you install your provider ROM? How did you do it (via SD-Card or via Active Sync connection)?
It is difficult to say what to do when I don´t know what caused your issue

the problem is solved

beemerfanatic said:
the problem is solved
Click to expand...
Click to collapse
so the community is glad to have helped you. Congratulations.

thanx to ubejed (in an other tread)

beemerfanatic said:
the problem is solved
Click to expand...
Click to collapse
Been, Can you tel me how the problem solve, our experience is valuable to other user. I do apolgize if I put in the wrong room. It should go to Android or WinMo.
Background :
I bought a used HD2 and the phone have been flashed with H-SPL 1.28 and winmo6.5 installed. I did task29, flash Cotulla 1.13 boot loader. Flashed WM7 and back again wm6.5 and again. Since there I flashed so many NAND Android ROM with No serious issue. The only issue can not charge when OFF )
my friend wanna to buy this HD2 and she asked to give winmo6.5 for unknown reason. As advised by many tutorial, I took RUU 1.48, copied RUU_Signed.nbh and renamed to LEOIMG.nbh. Put on SD and reboot info boot loader push down volume button and power simultaeously. Upgrade went well.
Once booting white screen appear and loading .... for seconds 0002800 appear Not Allow and back to RGB Boot loader.
I do the following to recover : connect USD to Virtual XP machine. I just realize that the virtualbox is new fresh install after harddisk failure. I run ubuntu 10.04 x86_64 now. No activesync on windows (virtual). I download from microsoft and install activesync. No lucks, when I flash HSPL2 connection error. all USB Method can not work sync win machine requested syncing with activesync, which is I can not do
I posted similar problem on general Q/A someone advised to flash with SD method by using Stock ROM, Im downloading now from htc and they offering 1.66 after keying in the S/N.
Q : Give me clue, opinion, experience. will the phone UP by flashing 1.66 RUU ? if No, Is there any other method to recover. I have to hurry or I will face batterry run out.
I'm familiar with linux, I was retirement of gentoo user and now using ubuntu since ubuntu is just wotk. I did many times compiling gentoo kernel and doing patching the kernel (guided by google - LOL) i.e patching USB TV Tuner to enable work in linux.
I have SDK installed on my ubuntu machine. Please guide me further all guru here
cheers up

x1123 said:
Been, Can you tel me how the problem solve, our experience is valuable to other user. I do apolgize if I put in the wrong room. It should go to Android or WinMo.
Background :
I bought a used HD2 and the phone have been flashed with H-SPL 1.28 and winmo6.5 installed. I did task29, flash Cotulla 1.13 boot loader. Flashed WM7 and back again wm6.5 and again. Since there I flashed so many NAND Android ROM with No serious issue. The only issue can not charge when OFF )
my friend wanna to buy this HD2 and she asked to give winmo6.5 for unknown reason. As advised by many tutorial, I took RUU 1.48, copied RUU_Signed.nbh and renamed to LEOIMG.nbh. Put on SD and reboot info boot loader push down volume button and power simultaeously. Upgrade went well.
Once booting white screen appear and loading .... for seconds 0002800 appear Not Allow and back to RGB Boot loader.
I do the following to recover : connect USD to Virtual XP machine. I just realize that the virtualbox is new fresh install after harddisk failure. I run ubuntu 10.04 x86_64 now. No activesync on windows (virtual). I download from microsoft and install activesync. No lucks, when I flash HSPL2 connection error. all USB Method can not work sync win machine requested syncing with activesync, which is I can not do
I posted similar problem on general Q/A someone advised to flash with SD method by using Stock ROM, Im downloading now from htc and they offering 1.66 after keying in the S/N.
Q : Give me clue, opinion, experience. will the phone UP by flashing 1.66 RUU ? if No, Is there any other method to recover. I have to hurry or I will face batterry run out.
I'm familiar with linux, I was retirement of gentoo user and now using ubuntu since ubuntu is just wotk. I did many times compiling gentoo kernel and doing patching the kernel (guided by google - LOL) i.e patching USB TV Tuner to enable work in linux.
I have SDK installed on my ubuntu machine. Please guide me further all guru here
cheers up
Click to expand...
Click to collapse
There´s no need to install HSPL in order to install your Stock ROM. Don´t use any ROM but that one that came with that device (e. g. T-Mobile ROM for a T-Mobile branded device, HTC for a non-branded device.
Install it via SD-Card as you described. That should work.

[Q] htc hd2 rom to wm7.

can anyone help me? i tried to change my phone to lower rom version like was said needs to be installed on phone and needed to install windows mobile 7 on the htc hd2 phone and it keeps going to rom installation failure screen and rom installation recovery why wont it work help what do i need to do also it was the dark forces team rom update utility.

bobbymd said:
can anyone help me? i tried to change my phone to lower rom version like was said needs to be installed on phone and needed to install windows mobile 7 on the htc hd2 phone and it keeps going to rom installation failure screen and rom installation recovery why wont it work help what do i need to do also it was the dark forces team rom update utility.
Click to expand...
Click to collapse
Can you be more specific about what ROM you are trying to install, and how you tried to install it? Also, do you have HSPL amd MAGDLR installed on your phone?
If you can provide more specific details it will be easier to understand what is happening with your phone.

ok thanks its the madglr rom to set up the phone for next step in installing wm7 on the htc hd2 its the custom ruu version 2.15 for install on phone and its not going through

bobbymd said:
ok thanks its the madglr rom to set up the phone for next step in installing wm7 on the htc hd2 its the custom ruu version 2.15 for install on phone and its not going through
Click to expand...
Click to collapse
From your description it is quite hard to understand what your are attempting to do. My guess is that you are trying to install a Windows Mobile ROM before installing WP7. If that is the case, then you should be installing the Windows Mobile ROM when you are at the tri-colored bootloader screen. Turn on your phone with the volume down key pressed to get to this screen. Connect your phone to your computer, wait til you see "Serial" change to" USB" and flash your HD2 with the desired Windows Mobile 6.5 ROM

im trying to flash from 6.5.3 to wm7

bobbymd said:
im trying to flash from 6.5.3 to wm7
Click to expand...
Click to collapse
Are going into the MAGDLR screen options when booting and choosing option 5 USB Flasher before connecting your phone to the computer? Also what version of HSPL are you using? WP7 doesn’t support HSPL3.03/OSPL3.03. You need to select HSPL2.08 to run WP7 and MAGLDR.

im not seeing that screen and options for option 5 usb flasher im getting the rom update utility screen on my pc its 3.27.4.0 version madglr

bobbymd said:
im not seeing that screen and options for option 5 usb flasher im getting the rom update utility screen on my pc its 3.27.4.0 version madglr
Click to expand...
Click to collapse
You must install MAGDLR on your phone before you can flash WP7. When it is installed on your phone, hold the power button when you see the MAGDLR screen while booting the phone, and then you can choose option 5.

i tried doing the install of madglr on phone and it keeps failing it wont update phone it goes into the update recovery screen and says to unplug from pc etc

bobbymd said:
i tried doing the install of madglr on phone and it keeps failing it wont update phone it goes into the update recovery screen and says to unplug from pc etc
Click to expand...
Click to collapse
Hmm, did you install HSPL2.08 on your phone before trying to install MAGDLR?

yes and both wont go through they both fail

bobbymd said:
yes and both wont go through they both fail
Click to expand...
Click to collapse
Try changing USB ports on your computer, you might have a hardware driver problem. Also, use a USB port on your computer, not on a hub.

ok i will try that and see and get back

bobbymd said:
ok i will try that and see and get back
Click to expand...
Click to collapse
Okay, I have to get offline soon, so good luck. Check device manager on your computer to make sure the driver is installed correctly.

ok tried that and got the same thing i tried a 3rd port on my pc the device driver installed properly it said and still got the same thing dont understand whats happening and it seems in videos i saw on different sites it happens easy for them i dont get why it wont work for me??

Perhaps others may have an idea. On my T-Mobile HTC HD2 everything installs easily
Sent from my HTC Glacier

ok thanks bud

You are welcome. Other than the driver not installing correctly when you are in the bootloader I am not sure what could be your problem.
I am sure others will have more ideas for you. Good luck.
Sent from my HTC Glacier

need to restore to original OS

have android 4.0 on HD2 and it sucks bad..
how do I restore back to original OS windows 6.5

1. Download any WM 6.5 ROM for your phone you like,
2. power off your phone,
3. power it on while holding vol-down button (you should see 4-colour "matress"),
4. connect hd2 with usb cable to your desktop PC, run WM6.5 flasher.
5. Done... ))

i do that but the flasher says this after it recognize the phone and start flashing it stops and says this error{226} the update utility cannot get response from your PDA phone. please check that your ubs craddle/cable is connected properly between the pc and your pda phone and also check your pda phone.
i tried several times and i cant, even with stock rom, the ics rom it have in it is nand anybody help

Try this one.
http://forum.xda-developers.com/showpost.php?p=6933055&postcount=14111
For custom rom. try this.
http://forum.xda-developers.com/showthread.php?t=591784
I flash my hd2 using energy rom dinik. with radio 2.12.50.02_2.
So far I have not encountered any bug like freezing of lcd.
Thanks NRGZ28 for the rom and PG101 for the detailed instructions to install custom rom to my phone.

Yeh I would recomend NRG wm6.5 roms too, best wm6.5.3 experience available & it works perfect.
Try flashing via sd & check you current HSPL & radio are suitable too ...

yeah im actually trying to flash a wm6 from NGR but then again this phone have nand android installed and when i try to flash the wm6 ruu the flasher stops at 0% and says that the phone its not connected, after it showed it did before i pressed next, do i need any kind of drivers?
i have ht drivers from my sensation are they the same? i am a total noob for this phone and i dont like the ics thats why i wanna go stock while i learn little by little how to do things with it.

Flash via SD card method is probably way to go but take care with radio versions if a TMOUS HD2 or you will brick it.
You could install ActiveSync if XP or WMDC6.1 for Vista/W7 as it has drivers.

you can do a factory reset which should fix the problem