Hi ,
I've done some readin around the forums and struggling to find the right ROM.
I want to change my Magic back to a Stock Vodafone Magic ROM.
Does anyone have one? I thought I'd found one but it didnt work and looking in the ZIP file the files didn't look right (ie lots of image files no folders)
If anyone has one, that definitely works I'd appreciate it
Thanks
Lots of .img files and no folders? Sounds exactly like what you need. You need the stock sappimg for your device, which I'm guessing you found. Rename it to sappimg.zip or .nbh and flash it from hboot (volume down + power)
Hi,
Actually after a bit of digging around in the back of my head and searching some more forums, what I've realised I've got is a nandroid backup as I have the files
Boot, Chache, Data,Misc,System,recovery all img files and then a nandroid.md5 file
So will have a bash restoring that and fingers crossed it will work
EDIT.
OK great that seems to have worked. back to 1.5 Vodafone. Do you know if I need my sim card in to get the OTA update to 2.1 (or was it 2.2?)?
Cheers
Bit of an update,
I downloaded the official RUU....1.91...exe which has the stock 1.6 Vodafone (the nandroind backup I installed wasn't stock after all)
renamed the rom.nbh to SAPPIMG.nbh and and it has now put me to stock 1.6 fine.
However it's been a good half an hour and no update has been pushed yet.
Is this a continual OTA update or have perhaps Vodafone stopped sending it does anyone know?
Thanks
Related
Hello,
I want to kown how can i make a sappimg.zip file ?
I want to do same that this file : rogers.com/magic-zip1 but with another radio
If you know HTC's signature, simply sign the new zip file containing the new radio.
If you don't know HTC's signature, follow these steps:
1. Get a top job in HTC, and get hold of the signature.
2. Leak the signature, so we can enjoy rooting all our phones.
3. Sign the sappimg containing the new radio with the signature you found from HTC.
Or, to be serious. It's, as for now, no known way to make a sappimg.
not even with goldcard?
Mod. edit: not dev related, moved to general
May i ask, is there any one who has the sappimg for HTC Magic Taiwan (Hami), i need it urgently because after flashing the clockworkmod recovery, it does not really work and I tried to flash a custom ROM and it actually caused my phone keep restarting and i can't enter to recovery, the only way so far i think is only working which is thru sappimg but i need the taiwan version.... Thanks
shinyen said:
May i ask, is there any one who has the sappimg for HTC Magic Taiwan (Hami), i need it urgently because after flashing the clockworkmod recovery, it does not really work and I tried to flash a custom ROM and it actually caused my phone keep restarting and i can't enter to recovery, the only way so far i think is only working which is thru sappimg but i need the taiwan version.... Thanks
Click to expand...
Click to collapse
I'm having the exact same issue right now.
I followed these instructions (except instead of naming to HEROIMG.zip I renamed to sappimg.zip and it starts to load). - edit: There are instructions here too.
I'm downloading the RUU file from the HTC website right now to see if it will work, the one I tried before (can't remember the source) didn't work properly.
I'll post back when/if I can get it working.
hindey19 said:
I'm having the exact same issue right now.
I followed these instructions (except instead of naming to HEROIMG.zip I renamed to sappimg.zip and it starts to load). - edit: There are instructions here too.
I'm downloading the RUU file from the HTC website right now to see if it will work, the one I tried before (can't remember the source) didn't work properly.
I'll post back when/if I can get it working.
Click to expand...
Click to collapse
It's confirmed - this method does work.
It will get your phone working again, no more boot screens, no more perpetual restarting.
mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Thanks for putting up this post! I was about to request one last night.
Now if only there could be a similar guide to flashing custom ROMs
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Thanks Ivolol this worked a treat
Appreciate your guide and efforts.
I am running Win 7 64. folowed 1.15 method now running latest 1.32.405.6
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Click to expand...
Click to collapse
Weird; I tested a couple of RUUs (not as many as xmoo did) and all of them couldn't connect to my phone (whereas 1.15 could).
It'd be interesting to find out what the factors are that cause this. ATM the guide above is what to do if someone finds themselves in the same situation (the current ROMs won't find the phone).
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems.
Click to expand...
Click to collapse
+1 here, went through the normal RUU process fine just for ****s and giggles. I've extracted the ROM.zip though in case it's needed for future use.
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
nandihno said:
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
Click to expand...
Click to collapse
I haven't got complete knowledge of the entire subject yet, but:
a RUU will completely wipe all user settings / apps. Won't do anything to the sd card though.
An update.zip is akin to an OTA update, it does not wipe user settings.
Flashing with a stock RUU will mean that you can still get OTA updates.
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
tleehm said:
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Click to expand...
Click to collapse
There is a big reason I decided to buy my DHD outright and not through Vodafone
I'm pretty sure that Vodafone's OTAs will be different from HTC's. In order to get OTAs from Vodafone you will need their image on it.
Also with vodafone's ROM installed, I wouldn't think it would accept HTC's vanilla ROM/RUU without going through the entire root process (it would only accept Vodafone signed ROMs). So in order to get onto HTC's ROMs I would think you need to follow http://forum.xda-developers.com/showthread.php?t=841076 before the phone will let you run a HTC RUU on it.
I haven't explored goldcards as I personally have no use for one, but you might also need one by the sounds of it for the Vodafone ROM to let you replace it. (edit: yes it looks like you need one to officially flash from a Vendor ROM to a generic one.)
So this guide is mainly for people with vanilla HTC phones. Although someone has posted a stock rooted Vodafone ROM on the phones so you might be able to use the same techniques outlined here with that.
ssimmmo said:
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
Click to expand...
Click to collapse
clockwork mod is useful but not entirely necessary. You might be able to use this guide's method to flash a custom ROM onto it (haven't tried yet), but otherwise I think what you need is a recovery img that will let you upload custom/unsigned ROMs onto it. And also S-OFF I imagine.
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
nandihno said:
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
Click to expand...
Click to collapse
If you flash a stock RUU rom.zip then you will loose all custom apps, data, s-off, recovery, etc. It puts it to factory settings. If you are in the business of flashing ROMs then I wouldn't worry about OTA because the developers here will integrate HTC updates as they come out, if they come out
However yes I think if you flashed a stock RUU then you will be able to get OTA. You might still need a goldcard, I'm not exactly sure.
ivolol said:
mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Click to expand...
Click to collapse
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Dr. lele said:
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Click to expand...
Click to collapse
How big is ur sd-card, and also what brand. Sometimes this is also a issue....
It's a kingston 8 gb class 4, but thanks for the tipp, I'll try another.
Yep, it was the sdcard xD. It's updating as I type
Carnt I just use the updater on the pc with the Rom? I have tried the method and I don't see a Rom file just a data1 file which is a ear file. I really would like stock ROM on my device
edit: i just used the exe and it installed perfect, so now it should be stock with no root,and sn
cxeka7 said:
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Click to expand...
Click to collapse
An RUU is an exe which contains the stock 'firmware' from HTC to flash to your device. Basically it will do a full factory reset of your device. It won't wipe your sdcard but it will overwrite everything else.
it didnt asked me for anything on option B) or Install through Phone. i didnt get the option to flash it.
First of all, sorry if this is posted in the wrong place. Im pretty new to all this and don't really know how things work here.
I think im pretty buggered, and im pretty far out of my depth now. Im just posting to see if anything can be done or if it's already too late. Sorry if im missing something obvious that can fix this, however after 3 days of messing with this stuff my brain is starting to blur lol. Ok so here it is:
Tried updating to froyo via the OTA update pushed out recently. That failed and ive tried various ways of getting froyo to install over the last few days using Clockworkmod recovery. I ended up pushing a load of system files onto my phone via adb just to let the updater-script get past assert's. The point is, this was obviously a bad idea as I now have some kind of messed up copy of froyo installed which will not boot up past the HTC splash screen. Problem: the half-cocked update replaced the Clockworkmod recovery with the stock recovery so I now cannot use nandroid to push a backup back onto the phone
To make things worse when I boot into the stock recovery I also can't get into adb/shell, it detects the device but just says offline. Tried a lot of things to get round this but nothing has worked. So as ive got stock recovery and can't seem to get into adb anymore it would appear ive pretty much run out of options unless something can be done with fastboot... I don't know what im doing with that though so any help would be appreciated.
HTC Wildfire T-Mobile UK
S-ON
HBoot - 1.01.0001
Radio - 3.35.20.10
Recovery - Stock
Im at the end of the road here. If anyone has any ideas to try I would be very very grateful, otherwise il have to go see how much T-Mobile wants to repair it
Thanks in advance !
Undeadllama said:
First of all, sorry if this is posted in the wrong place. Im pretty new to all this and don't really know how things work here.
I think im pretty buggered, and im pretty far out of my depth now. Im just posting to see if anything can be done or if it's already too late. Sorry if im missing something obvious that can fix this, however after 3 days of messing with this stuff my brain is starting to blur lol. Ok so here it is:
Tried updating to froyo via the OTA update pushed out recently. That failed and ive tried various ways of getting froyo to install over the last few days using Clockworkmod recovery. I ended up pushing a load of system files onto my phone via adb just to let the updater-script get past assert's. The point is, this was obviously a bad idea as I now have some kind of messed up copy of froyo installed which will not boot up past the HTC splash screen. Problem: the half-cocked update replaced the Clockworkmod recovery with the stock recovery so I now cannot use nandroid to push a backup back onto the phone
To make things worse when I boot into the stock recovery I also can't get into adb/shell, it detects the device but just says offline. Tried a lot of things to get round this but nothing has worked. So as ive got stock recovery and can't seem to get into adb anymore it would appear ive pretty much run out of options unless something can be done with fastboot... I don't know what im doing with that though so any help would be appreciated.
HTC Wildfire T-Mobile UK
S-ON
HBoot - 1.01.0001
Radio - 3.35.20.10
Recovery - Stock
Im at the end of the road here. If anyone has any ideas to try I would be very very grateful, otherwise il have to go see how much T-Mobile wants to repair it
Thanks in advance !
Click to expand...
Click to collapse
You'll need a goldcard and an RUU. Look up how to make a goldcard and let me know when you have one
Wow, thanks for the quick reply
I did try creating a goldcard yesterday (using android.modaco.com/content/software/308798/pc-application-goldcardtool/). So assume I DO have one for the time being...
however if it doesn't work and I need to create a new goldcard:
Since I can't get into adb or boot up android and therefore can't access my sd card through my phone I presume il have to go out and buy a cheap card reader tomorrow.
Also, I have to run this command again:
adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
But if I can't get into adb how would I go about doing this, can I get the CID of the sd card from a card reader?
As for the RUU, there's many to choose from on shipped-roms.com, does this sound about right?
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe
Thank you so much for your help.
This this a decent guide from Paul over at MoDaCo.
Ok disregard my last post about a card reader... I managed to borrow a friends android phone since it appears goldcard's are specific to the sd card, not the phone. So after following the instructions I now definitely have a goldcard.
Also have the RUU mentioned in the previous post.
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35. 15.19_release_130442_signed.exe
Is this right, and what do I do with these now to get them on my phone? Ive tried running the RUU whilst in Hboot and in recovery but it wont recognise my phone, presumably because adb isn't working.
Thanks again for the help.
There is another way to do it when it can only get into hboot. I'll look today for the method and let you know.
Sent from my HTC Wildfire using XDA App
Ah I did manage to get round it in the end. Using the PC49IMG.zip hboot method. Tried pulling the rom.zip from the temporary files that are made when running the 1.14.110.1 RUU. But obviously as I had a newer hboot or bootloader or whatever it was and it wouldn't let me downgrade back to this version. So I went for the newest one, 2.22.405.1 I think it was. With that in the root of the sdcard everything was up and running again after it had finished installing over the top of the messed up system.
Only worked because T-Mobile's OTA was a slightly older version 2.21.110.2, thank god there was a newer version available on the interwebs.
Probably not the best way of doing it but im just glad ive got a working phone again.
Thanks for replying though.
Just on a side note... its bloody ridiculous that its so hard to downgrade android!!! It causes people like me, who don't really know what they're doing, large quantities of banging-head-against-wall sessions
Undeadllama said:
Ah I did manage to get round it in the end. Using the PC49IMG.zip hboot method. Tried pulling the rom.zip from the temporary files that are made when running the 1.14.110.1 RUU. But obviously as I had a newer hboot or bootloader or whatever it was and it wouldn't let me downgrade back to this version. So I went for the newest one, 2.22.405.1 I think it was. With that in the root of the sdcard everything was up and running again after it had finished installing over the top of the messed up system.
Only worked because T-Mobile's OTA was a slightly older version 2.21.110.2, thank god there was a newer version available on the interwebs.
Probably not the best way of doing it but im just glad ive got a working phone again.
Thanks for replying though.
Just on a side note... its bloody ridiculous that its so hard to downgrade android!!! It causes people like me, who don't really know what they're doing, large quantities of banging-head-against-wall sessions
Click to expand...
Click to collapse
Yeah that's the method I was going to suggest, glad you sorted it out.
It's the fact that they lock out fastboot and stuff. If we had S-OFF from the factory, fixing these things would be so much easier
Hi,
how were you able to do this?
"Ah I did manage to get round it in the end. Using the PC49IMG.zip hboot method. Tried pulling the rom.zip from the temporary files that are made when running the 1.14.110.1 RUU. But obviously as I had a newer hboot or bootloader or whatever it was and it wouldn't let me downgrade back to this version. So I went for the newest one, 2.22.405.1 I think it was. With that in the root of the sdcard everything was up and running again after it had finished installing over the top of the messed up system. "
Thanks
hi:
today i recived a hero that stuck on logo after self updating using wifi
and i wanna know is it solvable at all
Updating as in official update or did you flash a rom? Did you make a nandroid backup? (If it was a rom you flashed)
he said that updated by phone itself not any external updates
Yeah totally read that wrong.. only thing to do would be to download an ruu
can you guide me to an ruu download area
tnx
well ive downloaded this file
RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
is it same you mean?
if yes how can i use it?
is there any file that i be able to put it on mmc and use as rom upgrade?
Can you get into fastboot (hold vol- +POWER I think?). You may be able to "extract rom from ruu" (Google how to do that), then rename to pc10img.zip, place on SD, install through bootloader in fastboot? I will try to have a go on my old hero if I get time later for u.
download last file at http://www.htc.com/uk/supportdownloadlist.aspx?p_id=283&act=sd&cat=all connect your Hero to PC then install it,it will return it like it was originally to 1.5, but remember it will WIPE everything out
then update OTA to get things back up to date
this is what i did
but i'm no expert, others might help you more
Hello, i recoverd my HTC desire HD with clock work mod, i had my original rom backup since before so it was easy. Now my phone have this info in it:
Android 2.2
1.32.405.6
12.54.60.25U_26.09.04.11_M2
When iam trying to update the ORIGINAL rom i get instantly a triangle with a "!" sign in it and nothing happens, whys that?
I have searched for some hours but no info on it, can it be becasue i might be rooted?
Updates will not work as you have modified the system partition.
If you find a suitable RUU to flash, this will revert the modifications and allow you to update.
andyharney said:
Updates will not work as you have modified the system partition.
If you find a suitable RUU to flash, this will revert the modifications and allow you to update.
Click to expand...
Click to collapse
Aha, okey then i need to read about RUU then i guess. Any good link for me? or ill just google, thanks!
Just search "RUU" in the DHD development forum. You should find a post by xmoo or football.
I took a original RUU and stil i cant update, anything more left that i missed? I mean i had original backup and everything before i took a custom room, is the impossible or what...
What did you do with the RUU? Did you run the ~.exe file?
I saw a thing now, i update RUU with a file size 10mb, file name was 1.32.406 something, is this only a OTA? I think i didnt get a RUU, iam abit confused ot the diffrent. Found a file now sayin RUU_ace_HTC... that is a big file, so i rename this to PD98IMG when i update?
The RUU should be atleast 200MB+ Its not an OTA. Its a complete package.
RUU = ROM Update Utility. You will need the one that matches you current firmware 1.32.405.x. Download it and run the ~.exe file. It will guide you through the process.
Thanks man for the help, i sorted it out and found a new RUU, the last one was an update or something weird =S. AFter som HTC sync problem finally it was solved, have been workin on this problem for a couple and month back and fourth to just get to original rom.
http://forum.xda-developers.com/showthread.php?t=1382235
You could just flash this one made by Nitr00 and should get updates, should there even be any anymore, again.