Related
High Tech Crap have once again surpassed themselves with the Wizard.
My stylus is held in by sticky tape and the paint flakes off, however even worse my good friend Alex's died a few days ago of its own accord. He thought maybe it had just run out of batteries so he plugged the charger in and within seconds it got so hot that it burned him and melted all the internal stickers off. god knows what would have happened if he'd left it.
Just a warning. Sounds like a lawsuit to me
Your issues seem atypical--I've been reading through this forum for a few months now and haven't come across a single one where somebody said their Wizard blew up/melted/what have you. Sorry you're having problems, but isn't that what a warranty is for?
Doubt the paint and stylus are covered by warranty, certainly not the paint as they know its just an issue full stop and would be replacing each and every unit constantly.
I disagree with your assessment. See here.
Well when your house burns down, don't say I didn't warn you
Doubt the paint and stylus are covered by warranty, certainly not the paint as they know its just an issue full stop and would be replacing each and every unit constantly.
Click to expand...
Click to collapse
They should do. You'd think for the price these things would be built to the highest standard. They MUST know these things are issues when they start producing these. Either that or they did NO product testing. I don't understand how it passes EC quality control.
If you bought a car and the paint fell off you'd expect it sorting out. I bet the paint won't flake off the Sony Ericssion p990.
If each of us here wrote to HTC/Trading Standards/our service providers we could get a brand new handset each.
In fact, if I start a petition on here that just requires name and email address, and sent it to HTC, threatening to send it to trading standards, how many people do you think would sign it if it meant a free device for each of us?
Because TBH, I'm pretty sick of spending hundereds of pounds on HTC junk only to have it fall apart after 2 months EVERY TIME, not to mention the software issues. In fact, I'm pretty sure they're required by law to replace things like that.
mike freegan said:
Because TBH, I'm pretty sick of spending hundereds of pounds on HTC junk only to have it fall apart after 2 months EVERY TIME, not to mention the software issues. In fact, I'm pretty sure they're required by law to replace things like that.
Click to expand...
Click to collapse
I am really sorry to hear about your issues. However, you must understand that the K-JAM is nowhere near the Casio E-200 as far as quality is concerned. I went through 3 E-200's and the product line was so bad, Casio eventually pulled it off the market and not soon later exited the PPC market altogether.
I am on many forums and have heard relatively few complaint other than the standard stylus-loose issue and maybe just a complaint here and there that the paint on the blue "E" for internet explorer came off. Considering that the Wizard comes from Imate, T-Mobile, 02, DoPod, etc it seems relatively few people have the same issues as you mention. Personally, I beleive either you treat your device harshly or you got one from a bad production batch. I have had my K-JAM for 8 months already, and aside from the stylus being loose nothing else is wrong with the device.
If you are that dissapointed, get on the phone with support and demand that you want a replacement unit. Tell them exactly what you complained about here that you didn't expect such an expensive device to peel and chip. See how that goes.
Please read properly.
My device is fine. I was talking about my friend's device. I assure you, I take excellent care of mine.
My point was that there should be safety mechanisms to prevent things getting so hot to the point that they melt and pose a fire risk, no matter how badly you treat it (which he didn't).
The only faults on mine are the loose stylus and the flaky paint -both known problems. My point is that for £400 you shouldn't have to put up with either. I mean, if you buy a cheap, low quality phone for £20 I bet the paint wouldn't flake off, so why do HTC who charge so extortionally for what should be quality products be forgiven for cutting corners and selling shoddy hardware?
Also, it's only because of the gurus on here like Vijay and Buzz that our devices work at all. We shouldn't have to rely on these guys working volentarily to try and patch up the bugs left in by HTC/Microsoft. It's not even like the odd bug; EVERY SINGLE ROM is full of serious errors that HTC know are there and affect even basic functions. I am grateful to buzz/vijay, but it sholdn't be their job to do it. They don't get paid to do it. For the price we pay, you should expect maybe the odd bug, but not some of the ridiculous and obvious errors that HTC sell these devices knowing about (talking more about the BlueAngel/Universal really, but alot of people report Wizard bugs too)
Also, saying a device by another manufacturer is worse does not justify making a sub-quality product. If the paint flaked off you car, I wouldn't try and defend it by saying that the wheels fell off mine so you should be happy. That's ridiculous. you paid alot of money for a product which you should expect a certain quality from.
I think if just a few hundered of us petitioned, threatening to involve trading standards, it might just give HTC a kick up the arse, show them that we won't just put up with this stuff because they can't be bothered fixing it and get them to put a little more effort into ensuring the hardware and software quality of their next device.
Viva la revolution
Sleuth255 said:
I disagree with your assessment. See here.
Click to expand...
Click to collapse
That maybe so but it doesnt change the fact that the paint flakes off.
What would the conversation to support go like ?
Consumer " Hi I bought a device from you and the paint is flaking off. "
Support " Yes but the device will survive should it be dropped in water "
Consumer " Really ? "
Support " Yes. "
Consumer " I didnt realise. Sorry to have troubled you. "
:roll:
right.... I guess I deserved that....
I'm actually wondering if HTC actually makes all the various cases for these devices. Or, do they sell the basic insides as an OEM provider and the end seller provides the rest. This wouldn't apply to Qtek devices of course as these probably would be completely produced by HTC.
Case in point: I'm not aware of paint peeling or loose stylus issues on the 8125. Perhaps somebody can correct me here.
now this is funny!!! I have not had any problems with the phone yet. But i would sign if anyone started it. I will stand by my boys in arms hehehehe
but i do think there is a diffrence between a car and phone, that the phone takes alot from being in a pocket or something ( how about we all put car paint on our phones) and a car is made to withstand rain and so fore. But i do think that it should be abit better for the price.
mike freegan said:
Please read properly.
Also, saying a device by another manufacturer is worse does not justify making a sub-quality product. If the paint flaked off you car, I wouldn't try and defend it by saying that the wheels fell off mine so you should be happy. That's ridiculous. you paid alot of money for a product which you should expect a certain quality from.
Click to expand...
Click to collapse
I seem to remember the old Citroen BX's cost a lot of money in their day and the paint flaked off... people still bought them though.... and they still worked... not to mention the fact the wheel could fall off and it would work too :lol:
seriously though. i agree that the paint flaking is a bit of an issue, and the stylus not seating properly is poor design. I do think however that fighting via a petition for them to replace our devices with equally as faulty devices is a waste of time. Example for this is my friend and I both have owend smart roadsters. they both slightly leaked as with nearly all cabriolets, but he moaned and demanded they fix it (i didnt!)... it went in for the supposed leak fix and came back worse than before and he had to reject the car (upsetting himself at the same time because he really loved that car for what it was). I just dont quite see why i would want to cut my own nose to spite my face right now
Cry me a river, this is what is known as the bleeding edge.
Look what you are holding in your hand, its a miniature PC with bluetooth, wifi, a phone with gprs/edge, a PDA with a full keyboard. This is an incredibly elegant device. Yes my stylus falls out but when I took it apart I was totaly impressed by the elegance of the design, flawed maybe but not the china crap I've seen. Also understand how the supply chain works. HTC contracts out with flex or foxcon or whomever which actually manufacture these, most all electronic mfg do this. So as a mfg you are dependent on the quality of your sub, yes you can and do police them but with a mobile workforce you are going to get quality issues. It's just the way the world works and as was said, that's what the warrenty is for unless of course you flashed a new rom or opened the case and voided it, then tough luck.
Well, I would agree with thompsd. I mean, HP and others have phones that work much stable, better and the paint doesn't flake off. So, why don't you just go ahead and buy yourself an HP Phone? I'm not sure about your reason, but I just can't affort an HP, and I don't really like the bulky HP (though their recent device looks promising, not sure about the price).
Hey, consider the HTC company is like.. how old? Oh man, give them some slack. I think they are pretty good in putting in so many things into such a small unit and if they aren't that good with their paint job, so be it. However, having said that, I'm still expecting them to be getting much better soon, inside out. Go ahead with your petition thing and good luck.
BTW, how does the 'easily scratched' iPod case ended?
Anyway, as for the fire thing, it is not an HTC issue only. The invincible Apple had laptop camp fire here and the mighty Dell had their contribution on the conference.
My advise is, don't leave any electronic stuff left unattented.
@ JNGold
First of all sorry for deviating from the true subject of this thread.
I am glad that you are happy with the build quality of your wizard. Since you have been using your device for 8 months I would like to know if the keyboard sliding mechanism is showing any signs of wear / looseness. I am interested in this because previously I owned the i-mate pda2k (HTC magician) and over few months of use the keyboard became quite loose to the point that it would slide open by its own weight if held vertically.
I am now considering going for the HTC TyTn once this is out. My only apprehension is the quality of the slide mechanism and your comments would be really helpful.
Thanks and Regards
Why do you repeat buy HTC if you're having such issues with their devices?
My point is, if HTC can do such an excellent job (and it is excellent) of getting so much technology into such a small space, and charge so much for their devices, why not just spend the extra 5 minutes to make sure the paint doesn't flake off? I don't understand why they think they can sell something which is faulty.
It's a device designed to be mobile and carried in a pocket (hence pocket pc/windows mobile). For £400 you are entitled to expect that the paint will be to a reasonable quality like EVERY other phone on the market.
I have just noticed that every HTC device has a whole host of small flaws that could be avoided so easily and at no extra cost, if they just thought about what they were doing. My friend has programmed for Windows Mobile and he tells me that they know its full of bugs and clashing scripts because of a lack of cummunication between departments, but they just release the software anyway, where an extra couple of days resolving the clashes between each application would solve the problem.
I mean, someone's worked really hard making all the hardware fit in the case which is the difficult part, but then not bothered designing or testing the stylus issue, something which is obviously gunna suffer from wear and tear.
I don't want a replacement device, but I just think that if we scare HTC/our service providers a bit with threats of trading standards, and show that alot of us are interested then it might make them spend the extra couple of weeks testing their next device and making sure it works well before they sell it.
I mean, the Sony Ericsson P990 does everything the wizard does, and more, but I bet they made sure the paint doesn't fall off and the stylus stays in. high functionality does not have to mean low quality.
Err... Can't speak for the p990 but the p800 I had suffered from peeling paint and stylus issues as well (cracking styluses, styluses that fell off) as well as a notorious keyboard design that actually worked until you put it in your pocket and broke the two tiny tabs that held the top of the keyboard away from the screen. So Sony-Ericsson isn't the acme of product perfection you hold them to be.
The only peeling paint I have had with my wizard has been the qtek label on the bottom. Which to me was no great loss.
To me the biggest issue with this phone has always been the software. Which honestly has improved dramatically since the 1.x firmware days.
I knew going in that the wizard had the potential to be a disaster of a phone hey lets see, an innovative package and feature set and new software from Microsoft is quite the triple threat for product mayhem but 9 months into it I have little to complain about.
That may all change tomorrow when the phone decides to self-whimilate or some such thing. but for now I'm content.
So over a trip I went on, my beautiful HD2 stopped working. I have my suspicions as to what caused the damage, but they still come off as odd. Basically, I had my HD2 working perfectly ... I went into the bathroom to take a shower ... and I guess it was steamier than usual [since I was in a different climate than usual] ... the next day the device would vibrate to indicate boot but only display a faint logo onscreen of the ROM I am using [meaning backlight broken] then it would turn off after trying to boot I guess. I checked out the phone, looked for damage or water or anything ... couldn't find anything significant. I did notice that the tags on the phone and batter, which I learned are for water detection, had turned red. That struck me as odd because it wasn't the first time I had the phone in the bathroom with me. In any case, at this point the device won't even turn on ... plugging in the charger does nothing. It is basically dead.
NOTE: AT NO POINT DID THIS PHONE GO INTO THE SHOWER OR TOILET OR WHATEVER. IT WAS PLACED DOWN ON A DRY SURFACE BEFORE THE SHOWER.
So I am going to T-Mobile tomorrow, see if they will be kind to me haha. I highly doubt it, because the tags don't lie .. regardless of whether or not I feel it was a valid case of "water damage".
So, if they give me warranty and provide me with a new HD2, then this thread will be useless, but under the assumption they don't ... I was wondering if the HD2 is the phone to stick with.
I think it is great and all, but I always wonder if there is something better.
I was reading that the Nokia N8 can be run on T-Mobile USA when unlocked, I am not sure of the truth behind that ... but the specs on that device look pretty awesome. I just don't like that it is a huge switch from WinMo/Andro/WP7 capabilities. It also doesn't have that XDA-Developers community backing.
That is basically all I was thinking in terms of alternatives ... any other thoughts?
Man that really sucks about your HD2, and that is very curious that the water indicators turned red. I also don't think you will get much love from T-Mobile either because of the water indicators. But I say get another HD2, I know it is starting to become a older device now but to me there is just no other phone out there that can stand up to the awesomeness of the HD2. Besides you know if you get anything besides a HD2 you will be kicking yourself in the butt later on for not getting another HD2.
The Nokia N8 will not keep you happy, there are issues with both the software and hardware, similarto the issues Nokia software has been displaying from the 5800/5530 software fiasco.
I would never go near a top range nokia - they have lost the plot over the last 2/3 years. all imho of course
I have a myTouch 4G/HTC Glacier and the phone is a beast. screen looks awesome(but not as big as hd2), hspa+, 768mb RAM, front facing camera, etc...lots of nice ROMS and great devs. Im running cm7 rc4 on mytouch and get 30+ hours on a full battery charge
So I went to T-Mobile today ... they instructed me to call Customer Care and they should be able to send me a new device. Looks like I am sticking to the HD2.
I am still curious though: I am aspiring to be a Software Developer (actually, Cornell CS '15 ), and for that reason I know the HD2 is a great phone for me [I think it is like 5 different OSes it can run]. I have been curious, because I haven't had the time to sit down and do this myself, which OS is best to have on NAND ... since now the HD2 can do WinMo, Andro, [and WP7?] on boot. I feel like WinMo is a great choice, because then I can use HARET to boot Android ... but then I can't use WP7. And if I choose WP7, then I am stuck with just that. And if I choose Andoird, then I am stuck with just that.
I dunno ... just something to ponder I guess Opinions are greatly appreciated
Keep checking this thread m8 for ppl's views on OS.
http://forum.xda-developers.com/showthread.php?t=1020358
Cyclonezephyrxz7 said:
So I went to T-Mobile today ... they instructed me to call Customer Care and they should be able to send me a new device. Looks like I am sticking to the HD2.
I am still curious though: I am aspiring to be a Software Developer (actually, Cornell CS '15 ), and for that reason I know the HD2 is a great phone for me [I think it is like 5 different OSes it can run]. I have been curious, because I haven't had the time to sit down and do this myself, which OS is best to have on NAND ... since now the HD2 can do WinMo, Andro, [and WP7?] on boot. I feel like WinMo is a great choice, because then I can use HARET to boot Android ... but then I can't use WP7. And if I choose WP7, then I am stuck with just that. And if I choose Andoird, then I am stuck with just that.
I dunno ... just something to ponder I guess Opinions are greatly appreciated
Click to expand...
Click to collapse
If you choose WP7, you can run Android off SD card via MAGLDR.
Sent from my HTC Vision using XDA App
So its official, adios HD2
I wish the device weren't so darn expensive! Unless I get paid as I am expecting for a little job I did recently, I may have to put off my hopes to get another HD2 for a while.
Anyone have any good recommendations of where to buy a New or LIKE New HD2 cheap? ... I can deal with superficial damage on the back-side, as long as the camera lens and the entire front side have NO damages to them [and of course the phone functions like new]. I have scavenged ebay a bunch today...best offer I could find was about 300$ for a brand new device, 280$ for a Like-New that fits my criteria ... 250$ for a like-new that is a little less appealing.
*note: changing the thread title so it doesn't seem to go off topic
Cyclonezephyrxz7 said:
So its official, adios HD2
I wish the device weren't so darn expensive! Unless I get paid as I am expecting for a little job I did recently, I may have to put off my hopes to get another HD2 for a while.
Anyone have any good recommendations of where to buy a New or LIKE New HD2 cheap? ... I can deal with superficial damage on the back-side, as long as the camera lens and the entire front side have NO damages to them [and of course the phone functions like new]. I have scavenged ebay a bunch today...best offer I could find was about 300$ for a brand new device, 280$ for a Like-New that fits my criteria ... 250$ for a like-new that is a little less appealing.
*note: changing the thread title so it doesn't seem to go off topic
Click to expand...
Click to collapse
I may be willing to sell my hd2
So I ended up buying a new [Used] HD2. I was told that the only issue was the metal plate over the batter [which I saved from my old HD2] ... so I was fine with it. I just got it today, it had a few minor scratches on the screen as well as what i think is a tiny Crack. So I am debating putting up with it, or calling the guy up and asking him what is up with that...
I purchased it on eBay ... so I just wanted your opinion on this: I bought it pretty cheap [235$] in comparison to other offers on the site, and the description was:
HTC HD2 (T-Mobile) cell phone
Used but in overall excellent condition
The only issue is that the metal cover on the back has some scratches, nothing major, screen is excellent
Includes phone /w battery and charger only, charger is not the original HTC charger, but it works 100%t
Click to expand...
Click to collapse
I called the guy up to ask a few questions: Is it just the back-plate that has superficial damage? Has the device been tested to work as though new? The screen has nothing on it? And the guy basically told me that the back-plate was the only issue. Now that I have the phone, though, there are those minor scratches, and that small crack on the screen, as well as the cover to the earpiece missing/worn so it is silver now, and also the top right and left corners have a bit of damage.
Basically, when I put the soft-shell cover I have over it [stock], I can't see any of the superficial things except the screen, so they don't bother me as much. After all, it was listed USED, so I expected so much. I am just concerned about the SCREEN. If it is a crack on the screen, it will just get worse with time, am I right? If it were a scratch I could deal with it MAYBE, but being a crack I just don't want to have to look towards buying a THIRD device later on due to a cracked screen ...
[by the way, this crack wasn't a result of shipping I think ... it was in a nice thick layer of bubble-wrap and none of the bubbles had popped.]
So what is your opinion? Should I call this guy up, see what the deal is? Or should I deal with it?
Opinions appreciated!
EDIT:: Here are some low-res photos [one close-up, one far away]. I had to use my Exca to take them, I couldn't find my camera
www.chicken-eggsolutions.com/Max/IMAGE_026.jpg
www.chicken-eggsolutions.com/Max/IMAGE_027.jpg
Swapping just the one piece is harder than swapping a glass digitizer screen combo, since to get them apart involves baking the phone for so many minutes at (I think it is) 60 degrees, then you will need to glue the new one back to the digitizer.its not just a simple swap. Plus the screen is the last piece in the stripdown process, EVERYTHING comes apart before you get to the screen.
If I were you I'd consider asking for some money back and live with the crack, or if he wont go for that tell him you want full refund. But you need to be quick, eBay will support your claim but leave it too long makes it look dodgy.
as for cracked screen getting progressively worse, that's not necessarily the case. I dropped mine ages ago (several months) and it now has around 8 or9 large cracks, all the way through the glass radiating from one corner all the way up to the top, and they are no worse now than when it happened, (i have a screen protector to save my fingers from possible sharp bits) though the rigidity has suffered greatly, and it now creaks and groans when it gets pressure in my pocket.
Yeah, I figured so much about the screen ... Turns out what I have is screen+digitizer, but the cable for the digitizer isn't in any condition where it will work again, haha. I didn't expect/want to do a screen-replace when I took apart my broken HD2.
Yeah, I know I have to act quickly for eBay to hold up a better case, in case the guy doesn't want to be easy about it. I just got the phone literally an hour ago in the mail.
I'll try to have some more higher-res photos up by tonight because I am still not sure if it is just a nasty scratch, or a crack...and as you can see my Excalibur doesn't exactly take a good picture haha. What I find odd is that usually a crack starts at the edge of the glass and progresses inwards, but this one starts in the middle of the screen and has like 3 little 'legs' of it coming out. I'm not scratch/crack expert so I can't really say ... I'll just have the photos up later.
Otherwise, I'll probably call the guy up tomorrow, see what the deal is/is going to be.
I would demand a Partial refund if you are happy enough with the phone.
If you get it, buy a zagg invisible shield screen protector to preven the crack from getting any worse. Had some good and bad luck with ebay purchases, but thats a story for another thread
Could be a pressure crack, I have a friend with a desire HD and he sat down with it in pocket, and a lighter against the screen, and he has a similar sounding crack, a few small cracks radiating out from a tiny central chip.
Okay, so I got the higher-res images ... the links are as follows:
www.chicken-eggsolutions.com/Max/IMG_0278.jpg
www.chicken-eggsolutions.com/Max/IMG_0279.jpg
www.chicken-eggsolutions.com/Max/IMG_0280.jpg
www.chicken-eggsolutions.com/Max/IMG_0281.jpg
I think that 280 shows it the best, the others give you a view of it in respect to the whole phone. It isn't huge or anything ... decently sized. When the screen is on, I really have to look to find it. Besides feeling it with my finger as I swipe over it, I wouldn't really be bothered by its being there. My friend said it seems more like a surface scratch, but unlike the other scratches, I can actually feel this one [which is why I think it is more like a crack]. Ohh semantics!
In any case, just another curious question. Seeing as I just got the phone, I haven't put on any custom ROM or anything, assuming I would have to settle an issue potentially, but I realized when trying to hook the phone up to my computer that the SD card didn't register. It had registered just fine earlier today, and at my friends house. Then I didn't use it for maybe 4 hours. Then just now it didn't register. It was fixed with a reboot. Is this likely an OS thing that will be fixed with a new flash of a better ROM [this is running a STOCK rom by the way]. This phone would be pretty limited without its MicroSD Card slot. I just want to make sure that if that is a hardware issue, I bring that up.
I guess this will be the final post/update:
I talked to the guy, and he offered me either to ship it back at my expense [but still get a full refund], or he could give me $25 for the inconvenience/hassle. Having really thought about it, looked at the scratch/crack. I took him up on the latter offer.
I guess it just means I should be more careful when using the phone. After all, its like I said: I can't notice it unless I look for it when the device is on. Its a shame that there was a crack on the screen, but for $200, I think it is a darn good bargain. Also, the MicroSD card slot has been working just fine...I think it was an OS thing. If the MicroSD card slot does turn out to be an issue, hopefully it is within the next 40 days, haha, so I can still get it covered by Buyer Protection. Further, I simply cannot find a price as good as that
So, I guess this is the end of this thread. Thanks to anyone who helped
I miss my girlfriend and am going to be away from her until maybe march of 2012. i am hoping i'll be able to make it back to her by valentines day, but i don't think i can so i'm making her a gift. she was talking about how she wanted to buy a tablet, but someone broke into her car and she had to spend the money on parts to fix her car. i'm just a broke college student with a smartphone i don't use and would like to take that apart and add a few parts then put it inside of a custom case and add an ipad 2 touch screen digitizer. i simply plan on taking my hd2 apart and extending the receiver and speakers and making a few minor adjustments. i then plan on adding larger speakers and converting the software in the hd2 into android and adjusting the resolution size to fit the ipad. i also have a few questions about increasing the memory size with multiple micro sd cards. i really want help from you guys on this please. give me all the info i need! i'm just getting info this month and building it next month, and thank you all in advance for your help.
Post pic's when you're done)
thank you i will. i'm currently just doing the research because i'm not too sure how to connect the digitizer to the HD2 but i am trying to find out how and if i would need any special parts.
As for the UI, this is brilliant and there's a tutorial on how to do this if you search the uploader's channel.
Unfortunately, I have no hardware-related experience at all, being only 14 And as stated, please post pics when done
just here to update you guys on my current progress. i've been having trouble figuring out how to connect the lcd display and digitizer to the HD2 so i'm current THINKING about the possibility of removing the small cell phone connections to the lcd display and digitizer and just soldering normal ones on so they can connect properly but then i wonder if the power output would also need to be switched out? i've also been THINKING about just removing all parts from cellphone motherboard that i need and mounting them onto a standard sized motherboard so i can easily and properly mount any adjustments that i make, but this is the first time i'd be doing any of this or anything like this. i do have an extra smartphone that i can try this out with first and let you know the results. i'll post pictures and videos when i finally start building this thing. again, i am gathering all the information i can for this month and i'll start building towards the end of december or beginning of january. sorry to take so long to do this all but i have to save up and research is always a good way not waste money. i appreciate all tips and i think i'll be using the software in that youtube video that was posted above. it looks absolutely amazing, plus i'll be increasing the memory size for this along with an attempt at upgrading the original parts if possible while still going the cheapest route possible.
I wish you the best of luck!
thanks man. i've figured out that either it would be incredibly difficult to do it with the ipad screen but, the motorola xoom or blackberry playbook screens are more compatible. the xoom screen in particular looks very promising because of its small connection and i'm currently trying to figure out if i'll need a more powerful power supply or not. i think that i will so i'm also weighing my options to see if i can just can a broken tablet or two from craigs list for free or if i'll need to buy one and if i do which one should i look for. any and all help i really do appreciate from you guys and when i start building i'll post pictures and videos.
Dude u r taking a nearly impossible task. U cant fit a big screen to the mother board. Coz an lcd consists of not only a pannel, it have a display ram embedded in it, for that u need correct pin outs and drivers in ur mother board which are made 100 percent for the default display only. U can switch display in smaller phones like old nokia 1110 , etc, in that case 2... the displays are not 100 % compatible. Also u have drivers and circuits in the mother board even 2 Control the led backlight. And are done with proper voltage output control. So better u dont crap up ur phone. If she is in such a need, give the phone 2 her. And buy a new 1 for yourself. Its not simple as u change ur speakers. If you are so advanced, i may help u with these tips.
U have to find a display with 100 similar specifications..
U have to modify ur display driver and backlight driver.
U have 2 make changes in circuits in motherboard.
If u success in all, u r done.
Better buy her a cheep netbook/ tablet...
send from my hd2 @ miui 1.12.2
I just want to point out that at the end of all this, you may have spent enough on parts to just get a cheaper tablet, like an HP Touchpad or something.
Also, it's extremely difficult to fit a lcd/digitizer from a device onto another device because of several issues:
1. difference in physical connector shape / size
2. difference in connector pinouts (pin1 may be 5V on 1 screen, but may be GND on another)
3. difference in voltage/amp requirements for screens (not sure on this one, but I'd say a bigger screen uses more power, but the circuitry of the HD2 may not provide it)
Search e bay. U can get several tabs at lo cost.
send from my hd2 @ miui 1.12.2
so i finally did it, and ill share my thoughts about why and how (some typos ahead sorry)...
so first,it is an amazing device,
build quality is superior over any phone i have ever held, and i came to realize in the end that the build quality is "the straw that broke the camel's back"
there are somethings this phone does best,
camera quality was the best i have seen on a mobile phone,
browsing was faster and android experience (except multitask) was smooth as butter.
the things i did not like and im getting to why the build quality is the thing that made me sell the phone eventually
- accessories - finding a fair tempered glass to this device is impossible,
very limited choice of cases and protective films that actually fit are overpriced as gold or diamonds :S.
and the worst about this phone and i cannot accept any argument about this, because i really tried everything, my Castrated dog wouldn't even trade with my phone for his sack of balls back because of what i did to the phone in order to last an extra hour.
im gonna spare the information here because i do not need consultation, this here, right now, is conclusions, i did my research and gave this a chance.
Battery Life is horrid,maybe the sexiness and the ease of use made me use this device more than i have used any other phone i had
i always had the feeling in my gut that this hardware does not fit the demands of such a small battery.
i aint gonna mention SOT times here because there is one thing S6 Users do agree on, unless they are hallucinating themselves,most of us agree that the battery is poor and it is never sufficient for a full day (for most of the people who enjoy their smartphones)
now, i dont mind that the battery is poor, i am always home (been trough motorcycle accident) and i don't even leave home so often to worry,
but i was curious to see if i use my phone so much and i charge it from 0 - to - 100% every day twice it means that in 1 year and 3 months from now, i am going to need to replace my battery
now we are back to the build quality,
What kind of company makes a phone board\internals can be reached only if you melt the glue and use suction to pull the back cover from this device,
and i came to realize that there's a very good chance i might end up destroying my phone or its build quality for a simple task of switching to a new battery.
so yes,
im thinking long-term and i decided to sell the s6edge and let some one else enjoy the inevitable funeral of this device.
i am sorry if anyone find this post offensive or bunch of lies but it is only my honest words and feelings,
will continue to follow this forum until i actually get a fair deal on my device and will be getting a simple phone until i figure out which phone i wanna stick with.
Mod Edit
Please continue this discussion here:
http://forum.xda-developers.com/galaxy-s6-edge/general/post-personal-s6e-reviews-t3066964
Thread closed
malybru
Forum Moderator
Hi All,
Since this is the 2nd time I've replaced my screen, i thought let's share my "real life experience" with replacing the screen, and if it is worth it, since the phone is kinda cheap. This is not a technical how to in replacing the screen. just my experience ( i'f you need some assistance in that, i'm happy to help) .
so first of all, if you have no experience in replacing the screen, it might be too expensive to replace. If you have the skill set to replace it yourself , it is definitely worth it.
The first time i replaced my screen i bought a screen from Ali express for around € 30 , and after replacing my screen i thought all was fine, however, the brightness level of that screen was simply too low.
so i tried finding a decent replacement, and even reached out to Motorola in order to get a decent screen. Sadly they wouldn't send me one, and only want to do the repair themself. The worst thing, I had to send it to England, wait out the quote for a repair and they couldn't tell me how much it was approximately gonna cost. ( kept getting the answer "the engineers will make an estimate" )
Since I'm an Advocate for Right to repair, the Motorola answer is something I'm really unhappy with. So far this is the only downside i found in Motorola, i somehow thought They were different, .... I guess i was wrong.
After searching for a while I found a reseller that sells the Motorola original Screens ( including the body ) for € 60
I think that repacing it is worth it, but only if you can replace it yourself, since it takes quite some time, and a repair shop would probably charge more then € 75 for the repair, excluding the screen.
so far I'm happy with the results, and i will be able to enjoy this phone a while longer.