Related
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
FredyOliva said:
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
Click to expand...
Click to collapse
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
My friend, you are simple the best. You are my hero. I lost one USB cable, but my phone come back. Your "Jump Start" trick worked perfecty. Really thanks about your tip. I don´t have words to glad you.
zabardast_1 said:
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
Click to expand...
Click to collapse
Thanks !
really glade you have it up and running
Have a nice day !
zabardast_1 said:
Thanks !
really glade you have it up and running
Have a nice day !
Click to expand...
Click to collapse
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
FredyOliva said:
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
Click to expand...
Click to collapse
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
zabardast_1 said:
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
Click to expand...
Click to collapse
Thanks one more time and sorry to annoying you...
I LOVE YOU !!!
Thanks more than a lot
Jump start trick worked fine for me too !! I cut the wire off from old usb mouse and use it as informed.
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
But my battery is alive again and I m happy, thank you !
jagr55 said:
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
Click to expand...
Click to collapse
It's just a design flaw. Sometimes things get by engineers. They're too busy trying to create an interesting user experience, and they forget to cross t's and dot i's.
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
iceblade911 said:
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
Click to expand...
Click to collapse
Thanks you all,it was grrrrr8 to hear you all got your phones working again.
Have a nice day !
my qtek 9100 freezes at startup after jump starting.
I jump started my Qtek 9100 and it started up as normal but it freezes at the windows mobile loading screen and doesnt go any further. Does this mean its charging or is the battery completely dead or something?
Wow, it like totally worked but Then I let it charge but battery stays at 0%
Thanks for this thread.
My word am I happy ...
Worked like a charm...
You are my hero! mi Qtek is alive again, i bought a cheap wall charger for a V3 Motorola and it can charge my Qtek after a battery drain off, i tray a lot of things but the usb wire cut off solve my problem and im happy again, thanks a lot and greetings from mexico! Saludos!!
Thanks man it was worked for me,
I was trying to put windows mobile 6 but after that mu camera and voice call buttons doesn't work
If you know more about win mobile 6 on wizard pls help me
Thanks
please do not use stripped USB cable or 9V battery to resurrect wizard. the battery is rated 3.6-3.7V (?? cant remember)... use 3x AA(A) batteries or other 3-4V power supply. I've done this with old pc PSU which has 3.3V output.
Just put battery in, connect charger, connect + - cables while inside wizard - bootup - when windows is loaded device can charge itself - disconnect resurrection power supply.
do not try to charge li-ion battery with whatever currents/voltages... or at least wear some kind of fire protection
please i need solution for my trinity dopod d810 wm 6.1 Profesional
today my trinity won't charge,it still on 0%.my battery drain and wont charge again.i try to charging with wall Charging,but it can charge,it same when i try charge with USB connect to my laptop.
i think it's not because my battery is weak,so dont give me solution to change new battery.
anyone have problem same with me?please give me solution.now my trinity can turn on when i plug charge to my pda.
hi
dayat11 said:
please i need solution for my trinity dopod d810 wm 6.1 Profesional
today my trinity won't charge,it still on 0%.my battery drain and wont charge again.i try to charging with wall Charging,but it can charge,it same when i try charge with USB connect to my laptop.
i think it's not because my battery is weak,so dont give me solution to change new battery.
anyone have problem same with me?please give me solution.now my trinity can turn on when i plug charge to my pda.
Click to expand...
Click to collapse
i am having the almost same problem. my xda atom charge from company charger but for a while and after that it stops charging. but i can charge my atom from usb cable. very strange
I had some problems with charging as well. In my case there was so much dust inside the usb connector of the phone that it just wouldn't connect any more. I got all the dust out with a needle and applied a little spray to clean the contacts.
Works just fine now
I own a Gene now showing a weird problem, if i connect the charger then it the full charge green led will glow after sometime, but lose charge very fast. There is no problem if i used usb cable for charging. Is this a problem of charger or the charging port. The phone some times restarts when charged using charger.
Dhanishmohan said:
I own a Gene now showing a weird problem, if i connect the charger then it the full charge green led will glow after sometime, but lose charge very fast. There is no problem if i used usb cable for charging. Is this a problem of charger or the charging port. The phone some times restarts when charged using charger.
Click to expand...
Click to collapse
i think battery is faulty u should replace battery first.
but if i use usb for charging then there will not be any problem...
Dhanishmohan said:
but if i use usb for charging then there will not be any problem...
Click to expand...
Click to collapse
recalibrate ur battery i think ur problem will solved by this!
hi
danish im also having this problem from some time so what i did is that i kept battery out of of phone for a day & then charged it through usb after that use its whole charge & when phone gets off then do the calibration process i think this problem arises due to countinous flashing of roms so dont flash device till its 100% charged
hey sam.
Did this procedure solved ur problems? Is it working fine now?
jerin
no still having this problem
but i find out that when i charge my gene through usb and then flash a new rom this problem goes off and then i can charge my phone through charger but after a week this problem comes back and then again i have to charge through usb . its just un understandable
Damn it..... i dont know what happened
it is still working perfectly yesterday
i did not drop the phone or battery, today the battery is still at 40% and as usual, before i went to sleep, i plug my phone on the USB Cable connected to my computer... but it is not charging.. and here i thought the error comes from my USB Cable , so i plug it into my wall charger ... but it is not charging at all!!!
and i thought, perhaps i have installed something , or some os faulty issue ... so i reset the phone via SETTINGS > About > Reset Phone
and after the reset.. it is still not charging...
argh what should i do... please help... anyone
i purchased this phone from singapore.. and i am indonesian.... the battery is currently at 30% , i am so afraid after it runs out of its juice, it will go away forever (because i cant charge it) T.T
what should i do....
(Is this battery and the one used on Galaxy S is the same? My sister has Galaxy S, should i try using her battery and try to charge it from my phone? .... ARGHHHH the omnia 7 is not even available yet in indonesia) T.T
Anyone help T.T
Get another charger it will charge get a new 1
Sent from my Nexus One using XDA App
you sure it is the charger?
You are talking about the wallcharger right?
usually it already charging via USB Connected to a computer.. but this time... the computer does not even detect if anything is connected.... (nothing happened when i plug this phone to my pc, usually there is a notification sound playing and my zune will autorun)...
damn it ... why this happened.. yesterday it is just fine (
damn it .. i am sleepy already..
i will go and sleep for now.. and left my phone turned off and plugged in the WallCharger
and hopefuly.... sigh.. it is still charing although no indication whatsoever is showing that
MAN... should i just try bang the damn battery hard onto the table... perhaps some of the chip inside the battery is misplaced by whatever unknown forced?!
damn it.. i never dropped the phone.... ARGHHHHHHHHHHHHH
this is so frustrating
Relax
Relax man your charger is bad.
I have the same problem but my girlfriend have a Wave and start using his charger and everything works fine.
Buy a new charger
question
can i use any charger from any phone for this Omnia 7?
(the one that has USB Output of course, such as xperia1 charger)
if we can, then it is also not working.... and why suddenly it wont do anything when i plugged it in my Computer USB
the very same computer works perfectly yesterday, and suddenly it is not working..
I suspect either one of these is the problem :
1. the micro USB Connector in the Phone is broken somehow , hence the when we plugged it on, it does nothing
2. the Battery (which if i am not mistaken has a chip inside) is broken, hence explain why it is not charging at all (which a bit does not make any sense, if it is just not charging at least when i plug it on the computer, it should still detect this device...)
I am from indonesia, i can ask my friend who is returning from melbourne to purchase a new battery and new charger hopefuly
Okay to make things simpler.. i have a sister who own a Galaxy S
can i use the galaxy s wallcharger to charge my omnia 7? ah hell,i will try it anyway...
okay according to this
http://www.samsung.com/us/mobile/cell-phones/SGH-I917ZKAATT
it goes great with galaxy s standard battery...
so i suspect, i can use my sister galaxy s standard battery and try to charge it using my cellphone
and i can also try to use my sister galaxy s wallcharger to charge my battery...
okay lets try ... hopefuly.... it is only the battery.. i can easily purchase a new battery... if it is the USB Connector on the phone... damn, how on this green earth can i charge my battery? OH we can use the kickstand battery charger?
hmm suddenly it is working now :O
thanks God... hopefuly it will never ever happened again T.T
Great it is working again
Any possibility that there is a way that the device forces a full recharge cycle to calibrate the battery?
Honestly i guess so.
I have the same problem...i can t charge my i8700 at all...what did you do to charge again???...i use a universal charger where i put my battery ...this happens for two weeks now..
cody28 said:
I have the same problem...i can t charge my i8700 at all...what did you do to charge again???...i use a universal charger where i put my battery ...this happens for two weeks now..
Click to expand...
Click to collapse
Try allowing the phone to run out of battery and turns off, then plug it into the charger, i would love to know if this is a failure or be design behavior.
Put the battery in the phone,
Wait untill the phone goes completely off.
Plug the phone to the wall charger.
write back here
i tryed this but the same problem it turns on but only while the charger is pluged in when i pull it out the phone turns off...i try to hard reset nothing..there is no update to work with non retail devices...the phone is from three uk...i m from romania there is no way to return there to an service..(
Having the same problem. Been working flawlessly.Plugged it in a couple of hours ago,but it doesnt appear to be charging.
When I use the USB charger on the PC, it is recognised, and Zune opens up fine and Phone shows up.
Have tried two Mains chargers, the Omnia 7 one and the one that came with my Galaxy S, same problem.
EDIT:
Left it plugged in overnight and it charged fine.Used phone, going down to about half battery.Plugged it in and seems to be charging without a problem!
I've got the same problem as you guys for a couple of days now.
Thanks for your reactions i will try everyone of them untill my omnia 7 charges again
knetsooj said:
I've got the same problem as you guys for a couple of days now.
Thanks for your reactions i will try everyone of them untill my omnia 7 charges again
Click to expand...
Click to collapse
Do you have a bit of battery left?
Windows Phone 7 devices power up when you plug them in. Maybe the OS is not booting and because it is S-AMOLED display we cannot tell if it is on or not.
Try Hard Resetting without booting WP7
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Omnia_7
Make sure you have a bit of power though, you don't want that to stop in the middle of the proccess
This has happened to me a couple of times. I think it's just a reporting bug, the battery is actually charging. I just have to restart the phone and it magically has charge
battery is charging too long
How long does take to fully charge the battery? For me it's about 4-5 hours with wall charger. Should not it be faster?
Mine is about the same for a full charge and I have also noticed my Omnia 7 not charging properly when I plug it into my MacBook Air however it does seem to charge fine on my Dell laptop for work.
Maybe the Omnia 7 is very sensitive for charging over USB on a laptop and needs a certain voltage for it to charge properly?
What works for me:
1. Original charger
2. iPhone 4 charger
3. iPhone 3GS charger
4. Blackberry Curve charger
Not tried any other micro-usb cables yet but will do at some point in the future.
I had the same problem too. The battery was suspiciously showing high levels for the last three days (went without a charge!). In the morning, the alarm did not go off, and I realised the battery was dead dead! Charged (wall charger) for 1.5 h without any use -- would turn off if I unplugged. Tried with the USB cable too (connecting to computer) and no use.
I read this post, and tried with the wall charger again, and it shows me ~60% battery, and seems to be charging normally!
Will post an update, but really seems like a forced discharge cycle to me too!!
Thanks for this thread, and I am interested in seeing if any more ppl are seeing such issues!
At least once, but sometimes twice a week, my battery keeps discharging while my Omnia 7 is attached to USB. And even the icon shows it should be charging.
The solution I use is taking the battery out for 10-15 seconds, put it back in, switch the device on, and charging works like it should be.
I hope they come up with a solution, because it's quite annoying.
Willem
Netherlands
Hey, everybody, i have strange problem: since i installed Pdaimatejam WP7.8 to my hd2 everything is okay, but if battery discharges less then 40%, i plug it to charge, and its not charging, but discharging, why? If battery is more then 40% everything is okay, i can charge, i tryed few batteries, cables and charges, same thing happenes..
EDIT: I have another problem with other HD2, i want to install to it WP7.8 too, but in bootloader word serial wont change to USB, when i conect that phone to pc.. Why?
I neeed help with first question more, second not that important..