Gingerbread 2.3 Telstra update confirmation - Atrix 4G General

Here is a link that confirms Gingerbread update is now available for Telstra AU.
http://ausdroid.net/2011/10/18/tels...ut-gingerbread-update-for-the-motorola-atrix/
Wonder if we can upgrade the 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-20-release-keys-signed-Telstra-AU.sbf posted here with this official version.

kururunfa said:
Here is a link that confirms Gingerbread update is now available for Telstra AU.
http://ausdroid.net/2011/10/18/tels...ut-gingerbread-update-for-the-motorola-atrix/
Wonder if we can upgrade the 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-20-release-keys-signed-Telstra-AU.sbf posted here with this official version.
Click to expand...
Click to collapse
Hold up, Moto sent a message out this morning, but it still isn't actually rolling out just yet. Batches will start by the end of today.
EPIC fail again for Telstra Atrix by Motorola Australia.

Shows as available now on Telstra website

kururunfa said:
Shows as available now on Telstra website
Click to expand...
Click to collapse
I have already flash 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-20-release-keys-signed-Telstra-AU.sbf , do I still need this OTA update? or they are the same?
Can anyone tell me that can I flash ANY rom (eg: at&t , ME860 etc ) or only bell and telstra ROM only after a unlocked boot loader + CWM? I m not sure cos I just got my telstra MB860 yesterday.

Telsra has nothing to do with rolling out the OTA. It's now Motorola that is responsible for updating. Check the Motorola website and they still haven't got the ATRIX listed for ant updates yet. Try your phones settings update and there isn't anything else either.
Sent from my MB860 using xda premium

I flashed the gingerbread sbf that was posted here a few days ago. It's less than impressive. I was considering rolling back to 2.2 but decided to give CM7 beta a crack and so far so good. The phone is like a rocketship now!

Is the bootloader open?
Thanks

I have the new Telstra update installed and would be willing to help find out. If someone could leave instructions in this thread, I'll have a crack at it in the morning.

Loaded gingerbread last night via WIFI and it took 2hrs to download. But everything is running really well now.
Sent from my MB860 using xda premium

Update ! Fail
Hey Guys,
Attempted update numerous times. Failed every time.
Was rooted, but have unrooted.
I don't think there's anything that should stop it from updating to GB.
Any suggestions on a fix?
Anyone else find it crazy that Telstra finally gets its butt into gear just before ICS?

Rooted the new update with the application found here.

bootloader unlocked?
Anyone else not get their bootloader unlocked with the 2.3 update? I had to manually unlock mine, but in the end it was fairly easy using the guides on here.
Just that i heard/read that the bootloader was supposed to be unlocked with the 2.3 update, so thought i would ask.

astol said:
Anyone else not get their bootloader unlocked with the 2.3 update?
Click to expand...
Click to collapse
No it was still locked. The Telstra update sbf was more a service sbf than a complete upgrade/wipe (I tested this by flashing the sbf with RSD lite, over the air as well as the Moto Updater - results all the same) - as in you dont lose any of your settings or apps, just updated the OS but doesnt do anything else.

astol said:
Anyone else not get their bootloader unlocked with the 2.3 update? I had to manually unlock mine, but in the end it was fairly easy using the guides on here.
Just that i heard/read that the bootloader was supposed to be unlocked with the 2.3 update, so thought i would ask.
Click to expand...
Click to collapse
how did you unlock your bootloader in this version 2.3.4 telstra?
my question how can i check whether bl unlocked or locked?
before flashing this i had i text at start screen which is unlocked, but after flashing this sbf this text it not visible

mikecarlone said:
how did you unlock your bootloader in this version 2.3.4 telstra?
my question how can i check whether bl unlocked or locked?
before flashing this i had i text at start screen which is unlocked, but after flashing this sbf this text it not visible
Click to expand...
Click to collapse
I just used this guide:
http://forum.xda-developers.com/showthread.php?t=1154600
and this to unlock bootloader:
http://forum.xda-developers.com/showthread.php?t=1255548
you can tell if you are unlocked, as when you turn on the phone, it says "unlocked" in the top left. cant miss it.

Related

[Q]Update

Hi
i'm on stock 4.1.52 but i try settings > about phone > systems updates, it said "your device is up to date!"
there is no 4.1.57 available for me to download? could it be i'm not using at&t simcard?
Help~
theres a lot of threads on these.
just search
any1 could help?
You're running an Atrix that came stock with 4.1.52? If so there might not be an update for you since that was a different build from the att release Atrix. 4.1.57 was only released to fix some bugs. 1.52 might not have had these so no need to update.
Sent from my MB860 using XDA Premium App
yes its come with 4.1.52... and i'm not using at&t could b there d problem?
well i found lots of same case like mine, just wanna to make sure it can update later on
I think the update is only for US devices. May have something to do with it.
then will b bad bad bad... no more update in d future...
Motorola forums had some information regarding the update only being for 4.1.26 phones. I was in beta for 4.1.57, and this issue was raised then from people who were on 4.1.52.
is stock 4.1.52 for bell atrix?
at&t not bell
looknsee said:
at&t not bell
Click to expand...
Click to collapse
ohh, so stores here in the US now have stock 4.1.52 instead of 4.1.26? damn... i was going to exchange my phone soon >.< #unluckyus
if any1 have 4.1.52 and wanna update to 1.57 do flash bk to 1.26, 1.57 will appear for u to update
looknsee said:
Hi
i'm on stock 4.1.52 but i try settings > about phone > systems updates, it said "your device is up to date!"
there is no 4.1.57 available for me to download? could it be i'm not using at&t simcard?
Help~
Click to expand...
Click to collapse
had same problem,I had to flash back to 1.2.6 in order to update to 1.5.7.Check the Android development forums under[GUIDE] Flash SBF to Motorola Atrix 4G.Hope that helps

Rooted

So im rooted my xperia play r800i. Got 3.0.A.2.184 2.3.2
How can i update to 2.3.3?
Check the Development section for more info.
http://forum.xda-developers.com/forumdisplay.php?f=1093
SirArt89 said:
So im rooted my xperia play r800i. Got 3.0.A.2.184 2.3.2
How can i update to 2.3.3?
Click to expand...
Click to collapse
If you have a locked bootloader then you can have a look at this post http://forum.xda-developers.com/showthread.php?t=1116090
I used this method and now have rooted 2.3.3
I think I'm going to root this weekend. Has anyone from Rogers rooted and went to 2.3.3 rooted? I have an R800a model. I have to uninstall stuff all the time because it won’t use the SD card. I can't even open Google Talk when the memory is low.
ncaissie said:
I think I'm going to root this weekend. Has anyone from Rogers rooted and went to 2.3.3 rooted? I have an R800a model. I have to uninstall stuff all the time because it won’t use the SD card. I can't even open Google Talk when the memory is low.
Click to expand...
Click to collapse
Check this thread. http://forum.xda-developers.com/showthread.php?t=1119074&highlight=rogers
He had rogers. Rooted it on 2.3.2 and then upgraded to 2.3.3 still retaining the root. Though i am not on rogers but this root method worked for me too.
afflux_ashish said:
Check this thread. http://forum.xda-developers.com/showthread.php?t=1119074&highlight=rogers
He had rogers. Rooted it on 2.3.2 and then upgraded to 2.3.3 still retaining the root. Though i am not on rogers but this root method worked for me too.
Click to expand...
Click to collapse
Thanks but there is no update in Canada yet. I'll ask him how he did it.
ncaissie said:
Thanks but there is no update in Canada yet. I'll ask him how he did it.
Click to expand...
Click to collapse
If you flash UK generic rom as he did, the phone will look for a UK update and not the one for canada. So you will be able to update OTA.
Help please guys..
OK, so I did the PC update to 2.3.3. Didn't like it without root
So I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
thanks in advance
ncaissie said:
Thanks but there is no update in Canada yet. I'll ask him how he did it.
Click to expand...
Click to collapse
If you checked the development section of the ....
[Rogers]Rooted 2.3.3 via Xperia_Play_Release_Generic_UK
It's the same method as the other thread, just edited for clarity.
nelly_boy said:
OK, so I did the PC update to 2.3.3. Didn't like it without root
So I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
thanks in advance
Click to expand...
Click to collapse
This is also explained in my thread
step 1./ google your carriers apn settings
step 2./ enter them in settings/wireless & networks/mobile network settings/Access Point Names
step 3./ Profit
I've added this to my original thread in the dev section
Hi, Got it working thanks. your the best!!!
Am scared to ask this but, have gingerbreaked fine but wen I try to update over the air. downloads fine, then does the install via the four coloured boxes. then stoops and says. Unable to update.
Any ideas? very sorry if I have missed this in your other thread.
thank you so much for your help
fyi, I am in the UK and am sure we can update. I installed nothing other than gingerbreak then went staight to update ota
nelly_boy said:
Hi, Got it working thanks. your the best!!!
Am scared to ask this but, have gingerbreaked fine but wen I try to update over the air. downloads fine, then does the install via the four coloured boxes. then stoops and says. Unable to update.
Any ideas? very sorry if I have missed this in your other thread.
thank you so much for your help
fyi, I am in the UK and am sure we can update. I installed nothing other than gingerbreak then went staight to update ota
Click to expand...
Click to collapse
You have a locked bootloader I'm assuming?
Not exactly sure why this is happening for you but this is exactly what would happen with my phone before I flashed to the uk generic firmware. I was thinking it had something to do with some removed SE software (was rooted). I would probably try starting fresh and flashing the Xperia_Play_Release_Generic_UK.ftf with flashtool, root with gingerbreak and then try ota update again. As soon as I did this OTA update went through without a problem. I'm just guessing that maybe you're running a carrier specific firmware vs the generic UK. I've flashed my phone multiple times with that firmware and flashtool and never had a problem (until I do something stupid and have to reflash ). Updates are not region specific but carrier/firmware(which is provided by your carrier so same thing ...) specific. This isn't your problem of course, just saying rogers firmware will only poll rogers for ota updates, the same with other providers firmware. You might want to take a look at this post though http://forum.xda-developers.com/showpost.php?p=14726176&postcount=41 hope it helps
thanks for responding...
thinking about it, I may have caused it. After doing the generic Uk flash. The last message said on the flash tool said to. enable debugging and reconnect.
I then pressed the root button, but it did not work. Stupid as this was for the x10 I think. Guessing maybe this changed something that causes the ota to fail.
I will just have to start from scratch.
thanks agin for your expert advice.

[Q] I got 2.3.6 Update on Bell

I'm on Bell Canada stock 2.3.4 rom and I have unlocked boot loader. I got an update message today for 2.3.6 update. Should I go ahead with it?
Not the best at searching are ya. Here ya go .http://forum.xda-developers.com/showthread.php?t=1388935
Sent from my MB860 using Tapatalk
I suggest that you capture and post back the OTA file here so people can look at it ...
I am under the assumption that phones with unlocked bootloaders won't be able to use OTA will have to manually update with fruitcakes. I may be wrong tho.
No,
I'm unlcoked.
I flashed the BELL 2.3.4 Stock and OTA worked fine.
noxlord said:
I suggest that you capture and post back the OTA file here so people can look at it ...
I am under the assumption that phones with unlocked bootloaders won't be able to use OTA will have to manually update with fruitcakes. I may be wrong tho.
Click to expand...
Click to collapse
I think he means it may make u unable to downgrade if u upgrade with an ota.
Sent from my MB860 using Tapatalk

Recieved ICS OTA to 9020A - Getting No Service

I received the OTA for ICS today, and it updated without any problems like some are having. However, since receiving the update, I get NO SERVICE most places. I'll occasionally show 1 bar of service and at that point SMS will come flooding through and send out. I have a 9020A and i'm wondering if they didn't change the radio to the T-Mobile version. Is anyone else having similar issues? I plan on possibly flashing a different radio to the phone when i get home (i'm currently at work)
I'm kinda going nuts. I only recently went to this from an I9000. I haven't even rooted it or flashed any roms. It was entirely stock. I'm admittedly a novice with this phone. Any help would be appreciated. Thanks!
Model: 9020A
Android - 4.0.3
Carrier - Immix Wireless
Baseband - NO DGSXXKI1
Build - IML74K
Kernel - 3.0.8-gb55e9ac [email protected] #1
And why didn't you grab a link before you ran the update? My guess says is you got a failed update and need to reapply.
I'm a noob to all this BUT at the very least I can tell you that you need to flash a different radio since "Baseband - NO DGSXXKI1" indicates a radio that is not going to work.
Is this a troll
Did we just get trolled? Dude that's so cruel.
Grab the radio here http://forum.xda-developers.com/showthread.php?t=1116884 and flash it with fastboot. That should get you the proper radio and get your phone back in working order...
omistake said:
I received the OTA for ICS today, and it updated without any problems like some are having. However, since receiving the update, I get NO SERVICE most places. I'll occasionally show 1 bar of service and at that point SMS will come flooding through and send out. I have a 9020A and i'm wondering if they didn't change the radio to the T-Mobile version. Is anyone else having similar issues? I plan on possibly flashing a different radio to the phone when i get home (i'm currently at work)
I'm kinda going nuts. I only recently went to this from an I9000. I haven't even rooted it or flashed any roms. It was entirely stock. I'm admittedly a novice with this phone. Any help would be appreciated. Thanks!
Model: 9020A
Android - 4.0.3
Carrier - Immix Wireless
Baseband - NO DGSXXKI1
Build - IML74K
Kernel - 3.0.8-gb55e9ac [email protected] #1
Click to expand...
Click to collapse
I used that guide as a referemce:
http://forum.xda-developers.com/showthread.php?t=1396937
You will have to re-flash a radio, if you paid attention, you probably saw a line about flashing a new radio during the process.
Flashing a radio is a quick and painless process if you have the SDK with fastboot installed. (Newer version on Mac doesn't include fasttboot, you have to get it on top of it)
Here's the link to the Radios:
http://forum.xda-developers.com/showthread.php?t=1116884
I suggest you look for your carrier, you might found people recommending different radio for different speed/reception. Get one radio, flash it, test speed and signal and find the one that works best.
You should be all set with those links.
Thanks everyone, I'll try this out in a bit and get back to you. I never read anything about flashing a radio. Again, I got the ota directly from Google... At least wifi is working.
Sent from my Nexus S using XDA App
wait..
isnt a 9020a for att?
tmobile is 9020t.
simms22 said:
wait..
isnt a 9020a for att?
tmobile is 9020t.
Click to expand...
Click to collapse
i9020a is for AT&T, how does he get the update?? Does any other 9020a get it???????
JakeOcn said:
i9020a is for AT&T, how does he get the update?? Does any other 9020a get it???????
Click to expand...
Click to collapse
Was wondering about that myself... Came about 3pm Eastern time...
Sent from my Nexus S using XDA App
omistake said:
Was wondering about that myself... Came about 3pm Eastern time...
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Nice.. I'll be waiting for it, by the way you should try radio you were using before OTA that should work properly
JakeOcn said:
i9020a is for AT&T, how does he get the update?? Does any other 9020a get it???????
Click to expand...
Click to collapse
could be an 9020a update. would explain why the 2g signal got worse, since he doesnt have 3g on it( )
Ghostyle said:
I'm a noob to all this BUT at the very least I can tell you that you need to flash a different radio since "Baseband - NO DGSXXKI1" indicates a radio that is not going to work.
Click to expand...
Click to collapse
This indicates he's got the wrong ROM. Probably used ROM manager to restore back to stock, leaving him with the i9020t image.
Sent from my Nexus S
use this Radio - it worked for me as i have the same model as you.
http://forum.xda-developers.com/attachment.php?attachmentid=620140&stc=1&d=1307623157
download and copy it to your sd card and flash it in recovery
No OTA update received on my i9020a...
Me neither...I keep trying though
Sent from my Nexus S using XDA App
There is another thread around here somewhere. I've been doing so much searching today i cant remember where i saw but, apparently rogers pushed the ota ICS update for a short period of time and then pulled it. I guess i know why now. shouldnt be much longer if the just have to package the proper radio. cross your fingers
g2theno said:
There is another thread around here somewhere. I've been doing so much searching today i cant remember where i saw but, apparently rogers pushed the ota ICS update for a short period of time and then pulled it. I guess i know why now. shouldnt be much longer if the just have to package the proper radio. cross your fingers
Click to expand...
Click to collapse
Rogers nor any other provider have a say when the ota comes out. It's 100% up to google
Sent from my Nexus S
Matridom said:
Rogers nor any other provider have a say when the ota comes out. It's 100% up to google
Sent from my Nexus S
Click to expand...
Click to collapse
what he said , that said im on Rogers(not that it matters) and nothing yet.
with the blessing of the provider.... R did have the update and quickly pulled it. It's happened before in R land.

ASUS cancelled 2.19.40.18 OTA

guys
http://www.asus.com/zentalk/forum.php?mod=redirect&goto=findpost&ptid=14836&pid=107979
asus said they cancelled this update due to unstable update...
1st i dont know what is unstable in this version[same as previous and new bug of call screen animation
2nd lol which update came without new bugs?
3rd they removed after they heard about unlocking bootloader..something fishy right :laugh:
they will probably patch the unlock method with the next update, gonna unlock the bootloader before updating to next update.
Sent from my ASUS_Z008D using Tapatalk
luisoman2000 said:
they will probably patch the unlock method with the next update, gonna unlock the bootloader before updating to next update.
Sent from my ASUS_Z008D using Tapatalk
Click to expand...
Click to collapse
ya same here..but what they will do to unlocked phones/??
ansebovi said:
ya same here..but what they will do to unlocked phones/??
Click to expand...
Click to collapse
Maybe there just will be a check and it will abort if the BL is unlocked
But it should be easy to adapt these OTA updates to unlocked devices
ansebovi said:
ya same here..but what they will do to unlocked phones/??
Click to expand...
Click to collapse
Nothing they can do. As long as you don't flash an OTA or full stock build. They may have a way to patch it in their droidboot.
ansebovi said:
guys
3rd they removed after they heard about unlocking bootloader..something fishy right :laugh:
Click to expand...
Click to collapse
That was my first guess as well
TheSSJ said:
Maybe there just will be a check and it will abort if the BL is unlocked
But it should be easy to adapt these OTA updates to unlocked devices
Click to expand...
Click to collapse
no i am asking about bootloader[can they lock it somehow if we flash next ota]
Harfainx said:
Nothing they can do. As long as you don't flash an OTA or full stock build. They may have a way to patch it in their droidboot.
Click to expand...
Click to collapse
so how can we update from here after ??? need to modified by someone for flashing ???
jaysus145 said:
That was my first guess as well
Click to expand...
Click to collapse
ya my 1st thought too,, haha
ansebovi said:
so how can we update from here after ??? need to modified by someone for flashing ???
Click to expand...
Click to collapse
That's how it works with all custom work. Once you're off stock, you're going to have to wait for someone to post a safe update/install.
Rushing in and taking an OTA is a very common way of breaking your build. Like what we see with running an OTA while rooted. Any number of problems can come up.
They could patch any number of things that would give you a very bad day.
With the support we have here though, we'll probably have flashable, safe OTA zips within a few hours of an OTA being captured/downloaded.
Harfainx said:
That's how it works with all custom work. Once you're off stock, you're going to have to wait for someone to post a safe update/install.
Rushing in and taking an OTA is a very common way of breaking your build. Like what we see with running an OTA while rooted. Any number of problems can come up.
They could patch any number of things that would give you a very bad day.
With the support we have here though, we'll probably have flashable, safe OTA zips within a few hours of an OTA being captured/downloaded.
Click to expand...
Click to collapse
well i am from sony device..they release main update of android..and 1 bug fix,thats all...so we dont care..and no need to worry about relocking issues..
this is the first asus device...man they releasing update for every 10days..i thought we could apply just like that..but since they didnt gave unlocked bootloader tool ,i got these doubt..
and thanks for info..
so i must wait for zips which is modified for unlocked bootloader[if they trying to relock]
I honestly doubt they're going to find a way to relock it with an update, but who knows what voodoo they may come up with.
Either way, we'll grab the updates and get them ready to be flashed quickly. It's a simple process.
I highly doubt he will do anything regarding unlocking/locking bootloader. because:
1. last year they released their official tool to unlock zenfone 4,5,6 bootloader after 3-4 months of release.
2. This year when they launched the zf2 in US they hold contest and developer events via xda. Now xda is a place where no one keeps their bootloader locked. so they knew exactly where they are releasing and advertising the product.
So I dont think they would even bother about this bootloader . Maybe it is an unstable build in terms of their quality test.
Dang, and my 551 (2/16GB) is still in transit.
Was browsing the forum and this thread - has 2.19 been captured and saved somewhere else, or was everyone just downloading off ASUS servers for this OTA (when forced)?
I don't know if I would want 2.19 yet. Maybe to keep on my PC until the right time. That is, if 2.20 comes out and the BL hole is plugged, and those who were on 2.19 (and took advantage of the bootloader unlocking) still got the update successfully - if either of those two outcomes are false, I wouldn't use it.
joel.maxuel said:
Dang, and my 551 (2/16GB) is still in transit.
Was browsing the forum and this thread - has 2.19 been captured and saved somewhere else, or was everyone just downloading off ASUS servers for this OTA (when forced)?
I don't know if I would want 2.19 yet. Maybe to keep on my PC until the right time. That is, if 2.20 comes out and the BL hole is plugged, and those who were on 2.19 (and took advantage of the bootloader unlocking) still got the update successfully - if either of those two outcomes are false, I wouldn't use it.
Click to expand...
Click to collapse
Everthings here http://forum.xda-developers.com/zenfone2/general/ota-links-stock-rom-t3093999
android is open source. and roms are not illegal. so why bother? i don't think asus is interested on ours bootloader plus, other zenfone's are already unlocked
joel.maxuel said:
Dang, and my 551 (2/16GB) is still in transit.
Was browsing the forum and this thread - has 2.19 been captured and saved somewhere else, or was everyone just downloading off ASUS servers for this OTA (when forced)?
I don't know if I would want 2.19 yet. Maybe to keep on my PC until the right time. That is, if 2.20 comes out and the BL hole is plugged, and those who were on 2.19 (and took advantage of the bootloader unlocking) still got the update successfully - if either of those two outcomes are false, I wouldn't use it.
Click to expand...
Click to collapse
Even if your phone gets here on a newer version (it won't), you could always downgrade everything and unlock from there. =)
Shakalaka has backups of everything going back to like version 2.12 or 2.13.
MatteXperiaU said:
android is open source. and roms are not illegal. so why bother? i don't think asus is interested on ours bootloader plus, other zenfone's are already unlocked
Click to expand...
Click to collapse
Problem is they can't support any ROM that isn't official on the zenfone. They'll pass you off. Like most manufacturers.
These are just official update links from Asus. Not backups. Asus can shut those down at any point. Not saying they will.
See here for pre-rooted ROM backups:
http://forum.xda-developers.com/zenfone2/orig-development/rom-pre-root-img-t3079590
one more doubt..
i think 2.17 is stable build from asus without the android os drinking the battery
now i have unlocked the bootloader ,can i reflash the 2.17[asking since it doesnt have the things which enabled to unlock bootloader] ...or once unlocked,we can do anything like other brands phone?
damian5000 said:
These are just official update links from Asus. Not backups. Asus can shut those down at any point. Not saying they will.
See here for pre-rooted ROM backups:
http://forum.xda-developers.com/zenfone2/orig-development/rom-pre-root-img-t3079590
Click to expand...
Click to collapse
I downloaded the appropriate OTA the other night, so if ASUS pulls the file, I still have it and can share it on Dropbox and/or Copy.
I get the phone today! So hopefully tonight I get the OTA up to 2.18 and then wait to see what upcoming 2.20 has to offer. If we can still unlock the BL with 2.20, I will let that OTA happen. Similarly if we find out that those who unlocked their bootloaders can't take the update (at that point I will cry a little, if there is no official way to unlock BL released with the update ).
If both scenarios above are false, then I will apply my downloaded 2.19, unlock the bootloader, then accept 2.20.
Best one could do eh?
---------- Post added at 07:24 ---------- Previous post was at 07:19 ----------
ansebovi said:
one more doubt..
i think 2.17 is stable build from asus without the android os drinking the battery
now i have unlocked the bootloader ,can i reflash the 2.17[asking since it doesnt have the things which enabled to unlock bootloader] ...or once unlocked,we can do anything like other brands phone?
Click to expand...
Click to collapse
I cannot imagine it would re-lock the bootloader. Should be able to downgrade, as long as you use the whole image and not just the OTA zip.
Now you got me wondering....
joel.maxuel said:
I cannot imagine it would re-lock the bootloader. Should be able to downgrade, as long as you use the whole image and not just the OTA zip.
Now you got me wondering....
Click to expand...
Click to collapse
no i didnt mean it will relock,..
but the unlocked needed some file right..it modifies something right? ...and it is not present in old things..so can old fw run on unlocked bootloader? [or would it get bootloop or damage bootloader]

Categories

Resources