[Q] [HELP]booting in loop after installing vegacomb HC 3.2 - Vega General

dear all... pls help!!!!
after install VegaComb HC3.2 9b Installer.exe in my device, my device stuck in booting loop.
how to stop the booting loop?
i don't know how to fixed it.
i am wait a hour, the booting still running.
anyone can help me?

i had the same problem.
Read the instructions carefully....
I took the long route:
1) installed VegaModdedStock_v1.10_v2.exe
2) installed VegaComb_HC3.2_Build9n.zip via recovery
3) and VegaComb_HC3.2_Build9n_update3.zip after
good luck

monsteria said:
i had the same problem.
Read the instructions carefully....
I took the long route:
1) installed VegaModdedStock_v1.10_v2.exe
2) installed VegaComb_HC3.2_Build9n.zip via recovery
3) and VegaComb_HC3.2_Build9n_update3.zip after
good luck
Click to expand...
Click to collapse
Yup thats how to do it, start from scratch!, +1..

Thanks All....
I have done install it and great work.
But i have new problem.
My 3G doesn't work correctly. Sometimes connect and sometimes no.
Anyone can help for this problem?
My position in Indonesia.

One more question.
For step '3) and VegaComb_HC3.2_Build9n_update3.zip after'
Is that install via recovery too?
thanks verymuch.

Related

[Q] [SOLVED]Problems Boot A501 !!

Hello,
My A501 is Brike dint of hacking, he can not remember boot, the boot is damaged through the fault of a bad boot.img!
I tried to put an update.zip to SD but it does not work! message 'magic value mismatch', so I do not know anything.
No way to enter bootloader or recovery!
Is there a way to re-established in the boot and put the Kernel without good access to Recovery ?
It starts with the Acer logo but rest on this page with the message in red.
Is through the sav, or is there a quick fix ?
Thank you in advance if you have a solution...
Sorry for my bad English !!!
Try 1 of these methods, they might help... - http://forum.xda-developers.com/showthread.php?t=1276227
Alan-B said:
Hello,
My A501 is Brike dint of hacking, he can not remember boot, the boot is damaged through the fault of a bad boot.img!
I tried to put an update.zip to SD but it does not work! message 'magic value mismatch', so I do not know anything.
No way to enter bootloader or recovery!
Is there a way to re-established in the boot and put the Kernel without good access to Recovery ?
It starts with the Acer logo but rest on this page with the message in red.
Is through the sav, or is there a quick fix ?
Thank you in advance if you have a solution...
Sorry for my bad English !!!
Click to expand...
Click to collapse
This will do exactly what you need it to with everything included in the download.
Pictures included in the tutorial. Even though it says to recover from ICS leak, the procedure is the exact same.
http://androidtabletgeeks.com/forum/#topic/-TUT-How-to-recover-from-ICS-leak-upgrade-.htm
ultramag69 said:
Try 1 of these methods, they might help... - http://forum.xda-developers.com/showthread.php?t=1276227
Click to expand...
Click to collapse
Thank you, but I had seen this post, but Method 1 or 2 does not work.
I no longer have access to anything and do not know to the ACER dbogage USB mode!
ATGAdmin said:
This will do exactly what you need it to with everything included in the download.
Pictures included in the tutorial. Even though it says to recover from ICS leak, the procedure is the exact same.
http://androidtabletgeeks.com/forum/#topic/-TUT-How-to-recover-from-ICS-leak-upgrade-.htm
Click to expand...
Click to collapse
Hi, Thanks for your url,
I test this method, but it is compatible A501?
It's long! 40 minutes and still no restart of the Tablette ..
And there is no progress bar?
Yhiahhhhhhhhhhhhhh ...
To XP no foud but to Sevent it is Ok !!! Thanks

ZTE Blade III Pro Root & CWM

ZTE Blade III Pro Root & CWM​
Requirements:​- Brain
- Correct drivers! if you have problem via fastboot drivers on x64 Windows install PdaNet
- USB Debugging ON
Steps:​- Download this:CWM
- Extract it and run recovery.bat!
- Follow the steps and when you are done you will be in cwm recovery!
- To root phone, if you're phone is not rooted when you click reboot in cwm it will ask you to root phone and root it by cwm!
- Download SuperSU from Market and you're done.
Q:How do i enter CWM recovery?
A:Turn off your phone and turn on by clicking Power + Volume UP​
Andrej732 said:
ZTE Blade III Pro Root & CWM​
Requirements:​- Brain
- Correct drivers! if you have problem via fastboot drivers on x64 Windows install PdaNet
- USB Debugging ON
Steps:​- Download this:CWM
- Extract it and run recovery.bat!
- Follow the steps and when you are done you will be in cwm recovery!
- To root phone, if you're phone is not rooted when you click reboot in cwm it will ask you to root phone and root it by cwm!
- Download SuperSU from Market and you're done.
Q:How do i enter CWM recovery?
A:Turn off your phone and turn on by clicking Power + Volume UP​
Click to expand...
Click to collapse
Thanks Man Share it with The world
Thanks again and now just wheat for the Source Code .....
How can I get correct drivers? These one's from zte aren't working ;( ;(
EDIT (i have win 8.1 /32bit)
Installing PDA NET soloved the problem.
Hot to unroot ?
Marq94 said:
Hot to unroot ?
Click to expand...
Click to collapse
i have the same question? How to unrot ? i have 24 month guarante.
Anyone succesfuly unrooted this phone? Have new update for it, and cant update it, becouse its rooted?
gg4000 said:
Anyone succesfuly unrooted this phone? Have new update for it, and cant update it, becouse its rooted?
Click to expand...
Click to collapse
You can update if you are rooted .... yes you can
Sent from my ZTE Blade III Pro using Tapatalk
ilievski.ace said:
You can update if you are rooted .... yes you can
Sent from my ZTE Blade III Pro using Tapatalk
Click to expand...
Click to collapse
So how to do it? It just restarts the phone and starts in cwm, than reports error...
I have problem with this, does it mean I don't have brain ? Anyway I downloaded cwm and run recovery.bat when I did this my zte restarted and freeze with androind icon (this one during turning on) First thing I thought it was I have bad drivers so i get this PdaNet but still my phone restart during this recovery.bat and as this program says I still have bad drivers;/ What should i do?
ilievski.ace said:
Thanks Man Share it with The world
Thanks again and now just wheat for the Source Code .....
Click to expand...
Click to collapse
Dali e ova sigurno za root, i nema da mi go zezne telefonot?
Don't work for me
I tried all posible drivers to root this and I can't. I go through first part, my phone restarts, shows Android Logo,and stops there. I need to pull out battery to work with him.Also, it disappears from windows task bar as a remote device. What's wrong?
EDIT: I used another PC with Windows 7 Home Premium and it worked!!!
@Andrej732 Fala brat, raboti na ZTE Blade 3 Pro, T-mobile, Macedonia.
As xda rules apply, an english translation must always be included:
Thanks bro, works on ZTE Blade 3 Pro bought from T-mobile in Macedonia.
Heya,
I tried to root the phone using the method above, and when i started recovery.bat, it all went well, but after it finished, my phone restarted and froze on first screen... I did removed the battery and turned the phone on, not in cwm mode, and it went well, i can use my phone and all that... When i tried to boot it in cwm again, it froze again... Anyone can help me?
If you get stuck in the android logo after it reboots by itself, you have to change the recovery image in the cwm folder.
download the recovery image from here https://www.mediafire.com/?z1rmgt9cc6hdjzb
remove the old recovery.img from the cwm folder and put this file instead. then rename it to recovery.img instaed of the long name it had before the .img. that sloved it for me. thanks to the person that posted here: http://www.modaco.com/topic/360389-recovery-clockworkmod-6049-for-zte-blade-iii/
Good Day!
plz reupload
I got exact same problem. gotta old a mini. super phone, sat nav, MP3 player, ran quake perfectly, decided for dinner reason to factory reset, now just endlessly bootloops. sure I had a custom recovery, but no idea if debugging enabled. would love to get this phone back

No recovery - Critical error

So this has happened at least half a dozen times since I got my device back from LG (Faulty screen replacement). I've managed to re-root the device and have confirmed that it is rooted.
However, when I try and reboot into the recovery it fails. I did manage to get a TWRP version working last week, however it wouldn't actually flash anything, so ended up using the LG flash tool to re-flash my phone several times to get it to work.
I can:
- Boot into download mode
- Boot the phone (it works fine)
I can not:
- Boot into recovery via any app/cmd/button pressing
I've tried to install various recoveries via:
- Install via TWRP app
- Install CWM via Clockwork mod
- Installed via a number of threads in the forums
Every time I attempt to reboot into recovery, I get the following:
Critical error!
--
Demigod crash handler : critical error!
press key to choose Dload mode or reboot
1) blah
2) blah
blah blah
--
Board info:
rev : 1.1 speed,pvs : 1.2 serial : blah
How do I fix this? In order to fix the recovery issue i'd need to use the Flash tool, and lose everything again I guess?
I'm using a stock d80230b, photo of the error attached. - I have never seen this before..
I have the same problem. I now can't install Amy recovery and flash any zip.
i have the same issue
adaimespechip said:
So this has happened at least half a dozen times since I got my device back from LG (Faulty screen replacement). I've managed to re-root the device and have confirmed that it is rooted.
However, when I try and reboot into the recovery it fails. I did manage to get a TWRP version working last week, however it wouldn't actually flash anything, so ended up using the LG flash tool to re-flash my phone several times to get it to work.
I can:
- Boot into download mode
- Boot the phone (it works fine)
I can not:
- Boot into recovery via any app/cmd/button pressing
I've tried to install various recoveries via:
- Install via TWRP app
- Install CWM via Clockwork mod
- Installed via a number of threads in the forums
Every time I attempt to reboot into recovery, I get the following:
Critical error!
--
Demigod crash handler : critical error!
press key to choose Dload mode or reboot
1) blah
2) blah
blah blah
--
Board info:
rev : 1.1 speed,pvs : 1.2 serial : blah
How do I fix this? In order to fix the recovery issue i'd need to use the Flash tool, and lose everything again I guess?
I'm using a stock d80230b, photo of the error attached. - I have never seen this before..
Click to expand...
Click to collapse
Same problem after putting back stock and root
You mentioned that you can use download mode. If you can flash BACK TO STOCK USING LG FLASH TOOLS and if that is successful post back here.
---------- Post added at 05:18 PM ---------- Previous post was at 05:11 PM ----------
adaimespechip said:
So this has happened at least half a dozen times since I got my device back from LG (Faulty screen replacement). I've managed to re-root the device and have confirmed that it is rooted.
However, when I try and reboot into the recovery it fails. I did manage to get a TWRP version working last week, however it wouldn't actually flash anything, so ended up using the LG flash tool to re-flash my phone several times to get it to work.
I can:
- Boot into download mode
- Boot the phone (it works fine)
I can not:
- Boot into recovery via any app/cmd/button pressing
I've tried to install various recoveries via:
- Install via TWRP app
- Install CWM via Clockwork mod
- Installed via a number of threads in the forums
Every time I attempt to reboot into recovery, I get the following:
Critical error!
--
Demigod crash handler : critical error!
press key to choose Dload mode or reboot
1) blah
2) blah
blah blah
--
Board info:
rev : 1.1 speed,pvs : 1.2 serial : blah
How do I fix this? In order to fix the recovery issue i'd need to use the Flash tool, and lose everything again I guess?
I'm using a stock d80230b, photo of the error attached. - I have never seen this before..
Click to expand...
Click to collapse
Flash back to stock kitkat. You are on a D802 right? if so I think I can make an autorec with a recovery of your choice for your phone.
Tried autorec ?
also for you intending to modify it, I will add more protections or simply remove all the stuff from playstore and other hosts. I don't have time to babysit.
Use the LG Flash tool, probably the easiest way to get your phone back to normal.
bender_007 said:
Tried autorec ?
also for you intending to modify it, I will add more protections or simply remove all the stuff from playstore and other hosts. I don't have time to babysit.
Click to expand...
Click to collapse
No, all credit goes to you and cloudyfa. All I was going to do was update the recovery to the latest version. Thank you for your hard work.
xmayhemreturnsx said:
No, all credit goes to you and cloudyfa. All I was going to do was update the recovery to the latest version. Thank you for your hard work.
Click to expand...
Click to collapse
The recovery in app will be updated - I'll remove all of the stuff from playstore(for many things) and host on other host where I don't have to wait 3 hours for their yes or no
bender_007 said:
The recovery will be updates - I'll remove all of the stuff from playstore(for many things) and host on other host where I don't have to wait 3 hours for their yes or no
Click to expand...
Click to collapse
I'm sorry I do not understand what you mean.
That I'll update twrp version which autorec installs and host the apk's somewhere else but not on playstore any more.
Does anyone know if the OP solved the problem and if so was it Autorec or something else? I have the same issue on my LS980 and would love to work through the solutions easiest to most frustrating in that order. Phone works just fine in every respect except recovery so I'm looking for a way to solve it without buggering it completely.
And thank you for AutoRec whether it can work this problem or not...it and tools like it make everyone's life SO much easier!
hello
i have the same problem, can someone help me how to make it work?
thanks for the help
Neofyte said:
Does anyone know if the OP solved the problem and if so was it Autorec or something else? I have the same issue on my LS980 and would love to work through the solutions easiest to most frustrating in that order. Phone works just fine in every respect except recovery so I'm looking for a way to solve it without buggering it completely.
And thank you for AutoRec whether it can work this problem or not...it and tools like it make everyone's life SO much easier!
Click to expand...
Click to collapse
You can try it out. It should work
Poslano sa mog LG-D855 koristeći Tapatalk
Does anyone find a solution?
pinhaum said:
Does anyone find a solution?
Click to expand...
Click to collapse
Autorec did the trick for me. Tried it with the TWRP Manager, but that didn't work. So, when facing this problem, download and install the Autorec APK (Google is your friend). After that, use it to get TWRP running.
Just posted this to verify the solution. Thanks a lot @bender_007.

Uninstalled OS! Please help!

Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
EddiFaddy said:
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
Click to expand...
Click to collapse
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Thanks a lot! I will try! I will reply if it worked or not
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Ok, i did follow the steps and it still doesnt boot! What should i try next?
If you installed an update zip it probably wants the stock recovery which you can get in the development thread on this forum. Flash that through fastboot then throw a folder named dload with an update.app in it on your sd card. Phone off hold power vol up and vol down until it brings you to a circle with emui inside. Should run fine after that. If not use the stock recovery to factory reset.
The reason your phone won't boot is because out never encrypted itself.for some reason that means life or death to mate 8 firmware
EddiFaddy said:
Ok, i did follow the steps and it still doesnt boot! What should i try next?
Click to expand...
Click to collapse
when you start the flash.all.bat and you see the unbrick message your phone should be busy and install the above official firmware and recovery.If not run it again disconnect your phone and connect it again when the unbrick message shows.To me worked fine.You must have your phone in fastboot off course

[ZE520KL] downgrade from Nougat to stock firmware Marshmallow?

Hello friends, sorry bad english
my zen3 was rooted with stock firmware (marshmallow) + unlocked bootloader (i dont receive any updates from software update). i tried to download the nougat update from ASUS website, put them on internal storage, and the notification shows up. loading and it send me to TWRP and shows error 7.
i decided not to install the nougat. and i found another nougat update from guy from xda (Tizen v2.0). Now, nougat already installed in my phone, but so much bug (i cant make a phone call with anyone, recording video) it says problem with the microphone. so, how do i downgrade this phone? i tried like 10 times to downgrade but no result.
i hope someone will help me step by step to downgrade this phone. Thanks!
I suggest you to do FACTORY RESET.
Let me know if problem solved.
xdaexec35 said:
I suggest you to do FACTORY RESET.
Let me know if problem solved.
Click to expand...
Click to collapse
even now im at Nougat version? will it downgrade? ok i'll try it later, right now no wifi connection to do another thing. is ther3 any solution to downgrade, beside factory reset? btw thx for your response
lastremnant said:
even now im at Nougat version? will it downgrade? ok i'll try it later, right now no wifi connection to do another thing. is ther3 any solution to downgrade, beside factory reset? btw thx for your response
Click to expand...
Click to collapse
Install it to fix WIFI
https://forum.xda-developers.com/zenfone-3/development/rom-tizen-rom-nougat-1701-8-ze552kl-t3573231
* For User ZE520KL
- Downloas file Add on : https://drive.google.com/file/d/0Bxz...ew?usp=sharing
- After finishing setup to home screen, open app "Rebooter" on App drawer
- Select Reboot Recovery
- In TWRP recovery, install file Add on, no wipe
- Reboot and Enjoy
xdaexec35 said:
Install it to fix WIFI
https://forum.xda-developers.com/zenfone-3/development/rom-tizen-rom-nougat-1701-8-ze552kl-t3573231
* For User ZE520KL
- Downloas file Add on : https://drive.google.com/file/d/0Bxz...ew?usp=sharing
- After finishing setup to home screen, open app "Rebooter" on App drawer
- Select Reboot Recovery
- In TWRP recovery, install file Add on, no wipe
- Reboot and Enjoy
Click to expand...
Click to collapse
oh btw, i already installed v2.0 update with WiFi fix. but when i tried to install the update 13 to v2.1, my phone stuck at asus logo and loading. what should i do? i cant even factory reset now
First of all, always read a whole thread.
It was mentioned that v2.1 make a bootloop.
Install in TWRP Titzen 2.0 and fix
xdaexec35 said:
First of all, always read a whole thread.
It was mentioned that v2.1 make a bootloop.
Install in TWRP Titzen 2.0 and fix
Click to expand...
Click to collapse
thx for your response sir. he already released the v3.0
See my guide https://eusouandroid.co/voltar-zenfone-3-para-o-android-marshmallow-6-0/

Categories

Resources