Hi.
I haven't been around here for a few months.
I currently have GSF beta 18 on my ZTE Blade which satisfies me, is there a new Rom that is "far better" than my current one?
I read something about Gen3, can anybody tell me, what that is (Only know about Gen1 and Gen2)?
CyanogenMod is currently the best rom available, and Gen3 isn't necessary at the moment.
Cyanogenmod works great!Is very smoothy and all games works perfectly.
Related
Hi all!
I tried to install Froyo 2.2 Jellyfish, EFIN, flb ROMS but when them are flashed then I see only Android logo but not boot logo so not work and CM7 ROMs works fine!
So how I can fix it?
can I?
and where I can get kernel for ZTE Blade CM 7.1 RC?
edit: IN cm7 OR NEWER CM7 the voice search is not work, how to get work it?
Are you Gen 1 or Gen 2?
I bought ZTE Blade II which used Froyo and now I use CyanogenMod 7 GingerBread 2.3.4...
So my Blade is GEN2
I use clockworkMod and sometimes ROM Manager ....
So, Do I need the GEN2 Froyo ROM to get it to work on my Blade?
=)
manumanfred said:
I bought ZTE Blade II which used Froyo and now I
So, Do I need the GEN2 Froyo ROM to get it to work on my Blade?
=)
Click to expand...
Click to collapse
Yup, that's why I think it wasn't booting. Try Swedish Spring. It's Gen 1 and Gen 2.
OK, thanks!
Right now I don't flash it to 2.2 because I use CM 7.1 RC which have good free memory so I can do something with my boring blade!
only problem is tat the battery ends too fast! that is really bad!
Hello,
I have Orange San Francisco branded ZTE Blade here
it is Gen1 with TFT screen.
it was bought with Android 2.1
I would like to update it to 2.2
what my requirements are:
-> android 2.2 that will work with European ZTE Blade
-> it has to be very stable and it has to work (I tried CyanogenMOD 7 on my Desire HD today and autofocus did not work, market crashed from time to time so I reverted to stock rooted 2.3.3)
-> for the reason above I prefer something that is very close to vanilla 2.2
-> should be faster than stock 2.1
any ideas what might suit my needs best?
I heard about FLB-Froyo G2 for ZTE Blade
is it good?
is it stable?
is there something better?
Thank you very much in advance
//edit:
I already rooted this Blade and installed Clockwork Recovery 4.0.1.5
OK, I tried
Swedish Spring RLS5
FLB-Froyo G2 R10b
I like Swedish Spring RLS5 very much
is there anything better?
as to 2.2, i. used to stay on Swidish Spring RLS5 for months, and I must say it's does a great ROM -stable, smooth, clean and with good battery life. deserve you a try. now I am on 2.3.
Sent from my ZTE-BLADE using XDA App
Well there are other 2.3 roms than Cyanogen. Why don't you update to Gen2? It's easy, check out Wbaw's thread here in XDA.
Japanese Jellyfish is a really decent gen1 FroYo ROM it's by Kallt_Kaffe, it's over at MoDaCo
If you want the best battery life, stick to Swedish Spring RLS5. If you want more goodies try CyanogenMod 7. But Swedish Spring is considered one of the best froyo ROMs and many prefer it to CM7.
Which is the best and stable custom rom for Generation 2 ZTE Blade aka OSF? I am currently using gingerstirfry beta 17.
Pls send it's step by step update process too.
I read on some forum that Ginger fish&chips or something like that is best available rom.
Thanks in advance
Well... some of the original ZTE Blade Roms should work best. As less as you modify the more stable it is
You should maybe just put the official ZTE Blade Rom on your device...
CM7 is not that stable... the Elite Blade Rom works nice but I had some reboots with it.
I would say CyanogenMod 7, others would say different! but CyanogenMod is pretty darn good
Cyanogenmod 7 is awesome for zte blade
Send from ZTE Blade
All recent 2.3 are very stable.
I also recommend CM7 as it has so many additional features, can't live without the bar to switch on/off wifi/3G/music/screen orientation/whatever you want when pulling down the notifications. It's so great that i can access this any time.
My 2 Cents
Having moved up/on from WM6.5 to Android I must say that CyanogenMod 7 is brill. I flashed both Corvus5 and GSf r4 both of which are good in their own right and tested each over a 2 week period. I'm running CM7 on both my Vega tab and Blade and I must say what a thrill. Fast, responsive and no crashes yet (touch wood). My 2 cents
Hi guys i'm very confused about Cm 9 nightly builds.
Is Eppy's 13/05 Buils is the stable vesion?
As far as I know there is no stable versions for the defy!
CM make stable versions but not for the defy well not the defy+ anyway and epsylon mods the CM version to work on defy with other mods as well. Like tweaks and he may add things and remove things.
So no its not stable. I dont think there is a stable CM9 build, the latest Stable CM build is CM7.1 AFAIK and it may be used by epsylon or quartx or other moders but I dont call that stable.
here is CM lastest stable version for the defy (not sure if it works on defy+ as its just a jordan version and there are no jordan+ versions)
http://download.cyanogenmod.com/?type=stable&device=jordan
Edit: so you know a stable version is considered one that would run like a stock version and one you can trust to put on other peoples device that would not know how to mod it. All the rest come with risks and they could work perfectly fine for you and not so well for others. From what I have found defy can be a real pain to work with and there is no real time support (by real time I mean we have to have modders like epsylon and quartx to mod the ROM's that are made but say CM to work on our devices) and the defy having so many makes and variations then there is alot of conflict and what works on one device may not work on the same one for another person.
Its a real pain and the bootlocked on the moto phones are a real downfall. I found out today that telstra got the defy as it meet there spec for rural service and MOTO changed them specs before shipping it out then telstra got them to change it back to the original. So the same device has so many different changes its not funny. As well as the cameras and batteries and all that so who knows what else has been changed!
Nightly's are not stable..
just try a nightly..if everything wat u need works fine then stick to it..so give it a try for atleast 1 week..
If you meant the latest version then it's Quarx' Version from May 11. Currently I am running this one on my Defy+ and for me it runs pretty reliable, but it's still not called "stable". More like "alpha" or "beta".
I have a question. Yesterday i manage to install cwm and unofficial cm10.1 (4.2.2) rom on my zte blade g. It have a few bugs (such as not working to well camcoder) but it's usable. Way faster and more stable than official rom. My question is: is any one know something about page with this development project (i was looking for it, but t disapeared) or is anyone developing something for this device. I would appreciate answer.
blade G
eemiks said:
I have a question. Yesterday i manage to install cwm and unofficial cm10.1 (4.2.2) rom on my zte blade g. It have a few bugs (such as not working to well camcoder) but it's usable. Way faster and more stable than official rom. My question is: is any one know something about page with this development project (i was looking for it, but t disapeared) or is anyone developing something for this device. I would appreciate answer.
Click to expand...
Click to collapse
We still waiting for new rom, but for now its too hard to build. We have very little people interested for this model cell phone.
Also, for blade G you can look in hungary android forum http://www.forum.kelzsoca.hu/androidfans/viewforum.php?f=283 and serbian android forumhttp://forum.androidsrbija.com/viewforum.php?f=321&sid=dc252de4ac2da92c15617cff953f4def