Non booting U8800 - Huawei Ideos X5 U8800

Ok my brother is a moron, he managed to flash again a stock rom to his u8800-51 downloaded from Huawei website.
Now this time instead of being stuck at a bootloop the phone doesn't do nothing at all just a vibration when you turn it on or connect it to the charger, the screen remains black, the pc does not detect it. No pink screen or recovery. Nothing at all.
What can i do?
Sent from my U8800Pro using XDA App

You sir are screwed
Sent from my u8800 using xda premium

Update
Ok, today i came back from work and plugged the phone on my laptop (It was completely discharged, the 4 touch buttons lighted up, the red light which i believe indicates battery started to blink and the laptop recognized as a Qualcomm MSM device,installed the drivers automatically and then nothing happened.
The screen remained black, then the buttons turned off, the red light stopped blinking, the phone vibrated and nothing else.

What happens when you remove the battery for 5 minutes and then try to go into Bootloader (Vol+,Vol- and Power) ?
If nothing, I'd say that it's bricked...
Is that a u8800-51? Or a U8800h?

katu2006 said:
What happens when you remove the battery for 5 minutes and then try to go into Bootloader (Vol+,Vol- and Power) ?
If nothing, I'd say that it's bricked...
Is that a u8800-51? Or a U8800h?
Click to expand...
Click to collapse
When i remove the battery for 5 minutes and then turn it on, the phone vibrates but nothing else happens.
It's a U8800-51 for sure, it's written above the imei number when you remove the battery.
Sent from my U8800Pro using XDA App

Related

Broken X10?

Hi. After I connected my xperia x10 to pc, it turned off. When i tried turn it on again nothing happened. Now when I turn it on, a led blinks and that's all. Nothing else happen. Can anybody tell me what is wrong and how to fix it?
Have you tried taking the battery out for 10 seconds?
Yes, I have, but it didn't change anything.
This has happened to someone i know, after they flashed their x10 it just blinked green for a split sec.
However all he did and you could try this is keep pressing the power button and each time hold it down for 3-5 secs. Do not remove the battery in between, just repeat the process till it vibrates then leave it to boot up.
Hope it works out for you...
It did happened to me yesterday, did exactly what the post above says, holding the power button for a long period of time, and it vibrates and turned on.
MarylandCookie said:
This has happened to someone i know, after they flashed their x10 it just blinked green for a split sec.
However all he did and you could try this is keep pressing the power button and each time hold it down for 3-5 secs. Do not remove the battery in between, just repeat the process till it vibrates then leave it to boot up.
Hope it works out for you...
Click to expand...
Click to collapse
It doesn't help. This red led blinks three times always when I turn phone on or when I try charge battery or when I connect it to PC. If I hold on power button it blinks 3 times then it stops for 0,01 s and blinks again. Please help me!!!
Hi.
Had you done anything before it started like trying to root or update?
Maybe it's your battery.... If that happend to my x1 I needed to charge my battery... My battery level was so low that it took about 20 minutes to get my x1 working.... good luck!
Sent from my X10i using XDA App
And use your wall charger!
Sent from my X10i using XDA App
XperiaX10iUser said:
Hi.
Had you done anything before it started like trying to root or update?
Click to expand...
Click to collapse
I don't know. I bought it in this condition. It wasn't flooded or decomposed.
Battery has 3.2V. Full baterry has 3.6V, so I think it should started on this battery.
Maybe you can try and leave it charging for a while? Have you tried that already?
Sent from my X10i using XDA App
Now it's charging. I'll leave it for a night. While charging this red led blinks. Should it be like that?
markk99 said:
Now it's charging. I'll leave it for a night. While charging this red led blinks. Should it be like that?
Click to expand...
Click to collapse
If the battery is bellow 10%, it blinks red. Then it will turn orange and green when >90%
It changes to green, but still I can't turn it on. When I push button nothing happen.
markk99 said:
I don't know. I bought it in this condition.
Click to expand...
Click to collapse
You bought it knowing it wouldn't turn on?
Yes, it was cheap. I thought I could fix it but now I don't know. Few minutes ago it turned on and now it stands at Sony Ericsson logo, but doesn't go any further. Just standing at logo. Maybe the battery is broken?
I reseted him and now again red led blinks.
I assume you've already connected it in flash mode and run SEUS?
XperiaX10iUser said:
I assume you've already connected it in flash mode and run SEUS?
Click to expand...
Click to collapse
try rooting it, you will be formating in the process.

Help please, GT-I9505 wont boot!!!

Hi everyone, I have a big problem and I dont know how to fix it
A couple of weeks ago I installed via Odin the Test Firmware 4.3 for my GT-I9505 and it worked fine so far.
Today I rebooted my phone normaly and for my surprise it wont boot..
It vibrates when I press power button but nothing happens, screen keeps black with no image at all.
Dont let me enter download mode or recovery mode.
I already tried to pull the battery off for 10 minutos and put it back in and nothing happens. just vibrates.
The LED turns RED if I plug the phone to the charger but still no charging image or anything
I dont have any custom recovery or anything.
Can someone please help me?
PS: sorry for my bad english
Suggest obtaining a new battery. Look at your battery has it grown in size? Try turning it on with the charger plugged in.
Sent from my GT-I9505 using Tapatalk
nikzDHD said:
Suggest obtaining a new battery. Look at your battery has it grown in size? Try turning it on with the charger plugged in.
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Hi, thank you for your reply, the battery looks perfectly fine in size and shape, and i had 80% charged before this happened.
When I plug the charger and try to power it on, it vibrates as usual but still no imagem at all and after a few seconds vibrates again, the RED LED lights ON and after a while it turns green that I beleive its because its full charged. I really dont know what to do
re: Download Mode
Gh0s7_Hun73r said:
Hi, thank you for your reply, the battery looks perfectly fine in size and shape, and i had 80% charged before this happened.
When I plug the charger and try to power it on, it vibrates as usual but still no imagem at all and after a few seconds vibrates again, the RED LED lights ON and after a while it turns green that I beleive its because its full charged. I really dont know what to do
Click to expand...
Click to collapse
What I would do is go to either ebay or some online merchant and purchase
a "USB JIG", they usually cost less than $3-4 bucks including shipping.
Once you have one all you do is put the battery in the phone and
plug the USB JIG into the usb port of the phone and wait 5 secs.
Then you will see the "download mode" and you will be able to odin flash the stock rom..
The jig don't work 100% of the time, it all depends on why your phone failed but it does
work over 90% of the time unless your phone get messed up in such a way that it's bricked.
Good luck!
Remember it's faster to click the "THANKS" button than it takes to type "thank you".
Hello again I dont know why but when I went to sleep I left the battery out of the phone for the entire night. When I woke up I inserted it on the phone and it turned ON normaly Im sending this reply from my phone lol. I dont know what happened I didnt do anything. Thank you for your help anyway
Sent from my GT-I9505 using XDA Premium 4 mobile app

[Q] Help Nexus 4 crashed no response

LG nexus 4
I don't know what happened. but I was running cyanogen mod 10.2 M1 snapshot. Tried to flash googy max 1.7.8 via rom manager and the flash failed, no big deal but when attempting to reboot the phone never turned on. Shows red light and will blink if I hold in the power button while it is connected to a charger.
other than that it does nothing at all.
sucks. I have tried every button combination and disconnected the battery and reconnected. to no avail.
when connecting to computer the computer recognizes "something" but I can not access the phone at all. When holding in power button acts like it disconnects then connects then red light blinks then disconnects again.
Will connect when I just plug it into computer with Qualcomm HS-USB QDloader 9008.
Is there anything more I can do? Aside from buying a new phone? :crying:
Google red light of death. Do your homework. There's loads of help on this.
Sent by mobile telephone.
Let it charge for a few hours/overnight, then boot into the bootloader (volume down+power). Once in the bootloader select 'Start'.
Sent using xda-developers app
Chromium_ said:
Let it charge for a few hours/overnight, then boot into the bootloader (volume down+power). Once in the bootloader select 'Start'.
Sent using xda-developers app
Click to expand...
Click to collapse
Ok I will let it charge over night but so far I can NOT get into boot-loader. That is what makes me so worried.
yantheman said:
Ok I will let it charge over night but so far I can NOT get into boot-loader. That is what makes me so worried.
Click to expand...
Click to collapse
ended up getting a replacement from google fortunately I still had my warranty working.

hard brick??

good day all, few questions for you's
how do i know if my 5603 is hard bricked.?
the phone was being used to text when it just died..wont reboot or get detected by win7 or 8 both with drivers for adb etc..(i have an ion and am good with flashing roms,cwm etc..) no matter what pc or laptop i use when i plug the phone in pc see it as just usb device for about 4 secs..
then its disconnected..
idk much about the led light on bottom its flashing twice quickly for about 4 or 5 times then stops..sometimes lol
have tried sus and pcc with proper technics and no go phone just wont be seen by windows...needless to say in flashtools it just says device maybe in mtp mode but cant change that setting cause phone wont boot..
any ideas? is phone a brick? thanks all
and apologizies if im in the wrong forum can a mod move if necessary thanks
the phone nvr vibrates whether trying to boot into factory recovery if any or any other time.nvr
when plugged into wall charger, at first led(bottom strip light) is red then goes out, if i unplug it it starts to flash repeatedly?
and sometimes no led at all when plugged in..
If it just randomly died In a normal situation (not flashing anything) and the red light flashes it might indicate that the battery died
Sent from my C5303 using xda app-developers app
Something similar happened to me a few weeks ago when I had mine in recovery. I got distracted, and the battery was completely drained. Leave it plugged in, see what happens. Sometimes it takes a while for the LED to show up.
thanks for the help
phone had never been touched totally stock...have had it unplugged for a week or so at least and been on charger for almost 12 hrs
has me stumped..thanks again.
so heres where im at with this phone
pc still wont recognize it..only as a usb device and only for about five seconds then it disconnects..
if i plug it into wall charger, it flashes once red quickly then turns BRIGHT red and goes to normal red for five minutes then the light goes out for two minutes and the whole process is repeated from the quick flash to steady red for five...
any ideas?
still no vibrating at all
Hi,just a thought-duff/dying battery?Does it go thru the charging cycle at all when connected to p.c. I wonder,best and I hope I'm wrong.
sent from my stick of celery in mid Wales
Perhaps this helps.
http://forum.xda-developers.com/showthread.php?p=43539309
Sent from my C5303 using xda app-developers app

[Q] Is my phone bricked or is it a simple battery issue?

Ok so yesterday I had my nexus 4 in the charger at 46 percent and i was about to send a tweet when the screen froze. thinking it was a simple crash i pressed the home button and no visual response then it powered off. now whenever i try to power it on nothing happens. i tried pressing the power and volume buttons. whenever i try to turn it on and i plug it in the red light flashes. sometimes it flashes continiously sometimes it is a solid color. so what can i do it wont communicate with the computer. im not sure what the issue is. is it a battery issue or is it impossibly bricked. i already charged it overnight to no avail.
oh and im running stock cm11 with the stock cm kernel. i just installed it the night before.
im planning on just openning it and unplugging and plugging the battery back in. will this work?
Try power button + volume down for 10 seconds and than plug in the power cable. You somehow must try to boot into bootloader.
CCody said:
Try power button + volume down for 10 seconds and than plug in the power cable. You somehow must try to boot into bootloader.
Click to expand...
Click to collapse
it wont work. the red light either flashes red or stays red.
dominiqueovalle said:
it wont work. the red light either flashes red or stays red.
Click to expand...
Click to collapse
How many times did you try that? It may don't work in the first time.
But if you can screw off you phone, that I would suggest to look after the batterie :good:
CCody said:
How many times did you try that? It may don't work in the first time.
But if you can screw off you phone, that I would suggest to look after the batterie :good:
Click to expand...
Click to collapse
do you think it could be bricked tho? the battery wasnt even low
dominiqueovalle said:
do you think it could be bricked tho? the battery wasnt even low
Click to expand...
Click to collapse
It is hard to say, because there are so many reason why your device doesn't boot only left the red LED flashing. One reason could be your batterie which is bricked. Another reason could be a thermal shutdown cause by overheat. And of course there are those little, little software issues that only appear once in five years...
CCody said:
It is hard to say, because there are so many reason why your device doesn't boot only left the red LED flashing. One reason could be your batterie which is bricked. Another reason could be a thermal shutdown cause by overheat. And of course there are those little, little software issues that only appear once in five years...
Click to expand...
Click to collapse
just my luck. but the battery was 46 percent and it wasnt that hot. i hope its not bricked because the computer refuses to detect it
I haven't got any idea what you are taking but i Had the Problem while my phone was loading it just went To Black screen and the red LED was blinking i just let it load and suddenly it worked but also my phone is quit stupid (never buy the huawei ascend g510 its s**t) it somethimes showes 40% and suddenly 1% and it shuts down.:thumbdown: .but i hope this helped you
Sry for my english
Sent from my HUAWEI G510-0100 using XDA Free mobile app

Categories

Resources