Database Users

Format SD

Long story short I used my Mac to format my sd card because i was installing the updated android cab & now my tp2 wont read my sd card no matter how many times i format it in fat 32. I even formattted it on a windows pc, still no luck in getting my tp2 to recognize, so i was hoping if there was a cab for the format sd from a stock wins 6.5 rom, then maybe that would help. I'm running Nrgz rom which as far as i know has no format option.
any help? I'm dying without my android partition now :-/

try flashing to
a Rom that has SD Format. Try to Format from the cell its self. worth a try..... or replace the SD Card

J.McRae718 said:
Long story short I used my Mac to format my sd card because i was installing the updated android cab & now my tp2 wont read my sd card no matter how many times i format it in fat 32. I even formattted it on a windows pc, still no luck in getting my tp2 to recognize, so i was hoping if there was a cab for the format sd from a stock wins 6.5 rom, then maybe that would help. I'm running Nrgz rom which as far as i know has no format option.
any help? I'm dying without my android partition now :-/
Click to expand...
Click to collapse
Pocket Mechanic will format an SD disk from your WM phone. You could install the 15 day trial and use it to format the card. Do a google search for it.

stevedebi said:
Pocket Mechanic will format an SD disk from your WM phone. You could install the 15 day trial and use it to format the card. Do a google search for it.
Click to expand...
Click to collapse
No matter how I try, I can't format my SD from POcket Mechanic. Always says the device is not functioning.
Yes, I'm running Pocket Mechanic from ram (installed to phone), and even for a card I'm not using (AFAIK). Could be some other program messing with it..
I just use my workstation..
On another note, if you put it in the PC and it doesn't even see it as a drive, some things just won't work with that card anymore, although I've often found some cameras will blindly write to a card and I've formatted several "dead" cards in a camera before and then I could see them on the computer.
Long ago I also had a card reader + special software at work that would blindly low-level zero a card then the drive at least showed up as "unformatted". Came in useful when we were developing something that used SD and trashed the card often

can someone tell me what this means and how to fix>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>E:cant mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0 <<<<<<<<<<<<^^^^^^^^ i have a 8gb class 2 sd hc card can someone help me

Fix Micro SD Card After Failure In Windows 7 Free

After trying a Sandisk Class 6 Micro SD card in my Focus and having it fail after the first reset I decided to look for some software to fix the card and use it in my laptop. I did a Google for partition software and found "EASEUS" and they offer their 'Partition Master Home Addition" Free to home users. I downloaded it to try and I was absoloutely amazed. This is the best software I have ever saw for working with Windows partitions and it supports all known types of removeable storage. It wiped the Micro SD card clean and repartitioned it in a very short time including formatting it in FAT32.

I downloaded this but not sure how to use it. How can I find the failed MicroSD if the computer cannot read it?

After my card failed in the Focus I put it back in the reader on my desktop and it showed the card as a 200 Meg card but it did see it. I tried to format it with windows but it couldn't do it. Try putting the card in you reader and open the EASUS software and let me know if it can see the card. I guess the reason my computer could see the card might be because I have modified my register to load files and look at the storage on the Focus. The mod I used on the registry is the one that has been posted to several of the forums and it does work.

this sounds like spam...

SPAM is a lunch meat

Formatting an SD Card from a Windows Phone requires the card to be sent the "Force Erase" command (SD Card Simplified spec (pdf) Section 4.3.7.3). This would require support at the driver level and support by the SD reader as well - so it is unlikely that this software will work.
If you need to erase an Windows Phone 7 SD Card, hard reset the phone (although this will create a new lock on the card) or find a friend with a Nokia

Not saying it would work in this case, but I recently built a new Game PC and had lots of permmisions issues with several HDs, they were not even visible in Explorer, but you could see them in the Storage Manager, allowing me to do some format work and making them visible to the entire system.

The software has no problem deleting a pass word protected partition. When I put the card in the reader it was showing a 200 Meg partition that it could see and a hidden partition that It didn't show. It told me the hidden partition was pass word protected and then gave me the choice of formatting the 200 Meg partition or the entire card. I chose the entire card and then chose FAT 32 and it deleted every thing on the card and when it finished the card had 31.2 GB of space, the same thing it had before it was put in the Focus. Not sure how it done it but it did.

capman231 said:
After my card failed in the Focus I put it back in the reader on my desktop and it showed the card as a 200 Meg card but it did see it. I tried to format it with windows but it couldn't do it. Try putting the card in you reader and open the EASUS software and let me know if it can see the card. I guess the reason my computer could see the card might be because I have modified my register to load files and look at the storage on the Focus. The mod I used on the registry is the one that has been posted to several of the forums and it does work.
Click to expand...
Click to collapse
Can you post up where I can download the mod for the registry?
Edit: Nevermind, got it thanks

Unless I found the wrong registry hack (I used the one listed at MobileTechWorld for using the phone as a mass storage device), this whole process was garbage. Didn't make the card readable, and this "best software" couldn't see it.

EASEUS did not work for me
Downloaded the partition manager software. After the format, it displayed an error message and exited. My microSD card is still not formatted right.

Nokia did it for me
I have an old E71 that revived my card..

steeldragonnyc said:
I have an old E71 that revived my card..
Click to expand...
Click to collapse
Wow! Funny thing is, that's not even full-on Symbian, it's S60. Because of your post, I dug my old Nokia N75 flip phone (which, similarly, runs S60) out of the retired phones drawer. It reads the Sandisk 16c4 from my Focus, and prompts to format it.
So, yeah, confirmed that any old phone running S60 can format a card from WP7. Awesome!

FL5 said:
confirmed that any old phone running S60 can format a card from WP7. Awesome!
Click to expand...
Click to collapse
Lucky you!

I just downloaded this software and it does NOT see my microSD card. I have a Kingston 8GB C4 I want to reformat and ck speeds for posting.
If this software really works, then provide actual instructions in this thread to make it work.

How to recover bricked (locked) SD card by WP7

If you have ruined your Micro SD by installing WP7 over it, here is the solution;
First and the fastest solution is to find a friend with a Nokia symbian phone like N8. Insert the card into the phone, phone says "locked SD" press cancel when it attempts for unclock code. Then use tools menu and select reformat. Get along well with that friend if you ever plan to flash WP7 again.
Second solution is to flash a NAND Android build with working USB storage while keeping the same card in the HD2. When flashing Android recognizes the card and creates a 200 MB partition on it. So this seems to be your card's new capacity. After flashing connect to a PC and select USB storage mode. Now you are done with the HD2, leave it connected in this state.
Windows (Win7 in my case) can see and even quick format the card as USB drive. However you need to low level format with flash erase. Search the forum (or use google) and get the program "SDFormatter V2.9.0.5" of Panasonic. Install it to your PC. When you run it, pick your SD drive, click options, choose Full (Erase ON) in the Format Type and "ON" in the format size adjustment tab. Then click format on the main window. Now you can leave and find something else to kill your time. Depending on the size of your SD this may take a few hours. When it is done, congratulations, you have recovered your SD. Depending on the assigned allocation unit size, Android may not recognize your SD, but your PC surely does. in this case, you need to quick format your SD with Win 7 or another program by choosing default allocation size.
The point here is, if Android recognizes the card, which means it can bypass the "Secure Digital" locking mechanism, then SD is not "secured" anymore and we should be able to format it to the proper capacity in the same way it automatically does for the preset 200MB. I guess lock is somehow removed by MAGLDR (or Android) and we only need to wipe out everything on the SD.

I just reflashed Android(NAND), then reformatted sd card and have 14GB space available. Then saw this post. Will do rest to get all of my SDCard back. Thanks.

SDFormatter v3.0 (BETA)
I had the same problem with WP7 "shrinking" my card. After reading this thread, I searched for SDFormatter and found BETA v3.0. Using that, I was able to just put my card into my PC's card reader and do a format, and got my full 16Gb back.
Just make sure you choose FORMAT TYPE as "FULL" (Erase or OverWrite -- I used "Erase" but I doubt it matters), and most importantly, set FORMAT SIZE ADJUSTMENT to "On."

okay, i've tried using minitools partition to try and delete the 200mb partition and then recreate the entire 16gb that is my microsd as well as sdformatter with full (erase as well as overwrite) with size adjustment on but the problem is that i can only see one partition, the 200mb partition, i can't even see the the second partition or whatever that wp7 created
anyone have any other solutions?

When SDFormatter finished formatting your card, you should have gotten a pop-up giving you the results and listing the size of the card.
On that pop-up, did it say 200MB or had it changed to 14.8GB (which is the usable space on a 16GB card)?
Sent from my HTC HD2 using XDA App

Just simply flash WinMo and use HTC's SD Card format tool in it, works fine (I did it myself that way).

When you format, you format a partition.
WM7 creates 2 partitions, the first one 200Mb and the rest of the SD for the 2nd.
To recover the SD:
1/ delete all partitions (I used EASEUS but many other soft will work, Win7 disk managment will not)
2/ create a new partition
3/ format it.
When I can't recover a disk I use a bootable distri of Linux, it's powerful to manage disks (sorry I've lost my disk so google will be your friend).

Great!
worked but had to do it via card reader on computer. Found SDFormatter V 3.0 and set to full erase and overwrite. Took about an hour but got my memory back! Thanks!

Nokia E51 did the trick
Just to confirm that a humble Nokia E51 was good enough to format an encrypted SDHC 16GB Kingstone Class 4.
After doctor Nokia's cure, I was able to recover all the space, I then used "SD Formatter 3.1" tool in order to totally clean up the card, just in case.
Repeated the trick also against a 16GB SDHC Class 10 Trascend, same great result
HTH

Nothing worked
Tried 5 Nokia phones (no E51 unfortunately), some of them ask for a password even if I say Format or delete the password. Some say that the card is corrupted and refuse to format it. Can anyone advise anything. I have an original SanDisk 16 gb SDHC class 2 card from HD2 T-Mobile. It was locked by WP and I cannot use it anymore.
Any advise will be much appreciated !!

OP's advice doesn't work?
Oh.
I assume that you got rid of it by installing Android. And I assume you haven't got rid of your HD2 yet. If second assumption is wrong, you may go and look for a device that can see the card. If only the first is wrong, skip the next paragraph.
Flash WP7 again. Updating it isn't necessary, but the tool may not work.
Download DEV_STORAGELOCK.cab from here. Send it to your device through WP7 Cab Sender. If you don't have it, download it from here. If you don't know how to use it - put the .cab next to the "WP7 Update Cab Sender.bat" file.
Use it. Double-click that .bat file, exit Zune, wait few seconds and press S. It doesn't work? Install the tool from "if needed install this tool" folder. No need to reboot, just go to that .bat file and press S again. The phone will reboot and the cab will be installed. On the phone tap that key icon, tap OK and ta-dah - the card is unlocked. Turn off WP7, take the card out, use it. Optional - get rid of WP7.

Thank you for your reply. I still have HD2 and it runs Mango just fine. The thing is that 16 gb card was the one that didn't want to work properly with WP. So I bought another one (not one ))) ) Transcend 8gb class 4 and it works fine. So, right now I have one useless 16gb card and I decided to bring it back to life. My only concern, If I switch the cards, will I loose any data on my 8 gig card (I have installed all soft that I need, and I do not want to loose it ), or maybe my phone will start to behave strange? I'm really tired of hard resets and re-installs.
Thank you in advance.
PS
That is why I was trying Nokia "trick"

No, the files should be there. But! WP7 may not boot and tell you that you have to use your 8gb sd. If it doesnt - good, you may unlock it. If it does, then... You will need to hardreset WP7 and that deletes all your files. Or turn it off and go back to your working card and look for devices that may see and format your 16gb.
Sent from my iPod touch using Tapatalk

Thanks, will try what you suggested

good job man..

All of this doesn't seem to work for me. I keep ending up in a boot loop when trying the DEV_STORAGELOCK method. The only WP7 version that i can get to work is XBmod 7004 as the HD2 also ends up in a boot loop when i try to update it. My pc won't recognize my card in any way. And the sad thing is that I only have 1 card with me at the moment. any solutions??

Haven't read the whole thread but Panasonic's SD formatter works a treat if you have access to anything that can mount the SD card to a PC.
Sent from my GT-I9100 using XDA App

anyone here who also had the problem that even SD formatter cannot repair the SD card?

well before formating any way to get the data on the SD card back? 16GB SD card is like 10-15 USD its not a big issue if u lose the card, but the issue actually is in the data that we might loose

If u want to get back your data u can use O&O Disk Recovery. This program restored my files from formatted and locked SD card.

[Q] Android can't see MicroSD card

As said, Android can't see my SD. I have CleanDroid installed on NAND.
When I insert the SD in the phone, appears an icon on the top that says "Now it's possible to remove the SD safely". If i remove the SD it says that it's removed, and when i reinsert it, again "Now it's possible to remove the SD safely". Obviously i can't install apps in the sd through "APP2SD", can't use Waze cuz it says that doesn't find the SD card in the phone, the same appears with the camera that tells that if i want use camera i need to insert an SD. BUT THE SD IS STILL THERE!!! what do I wrong with it?
I tried to change my 8GB SD with a friend's 2GB SD... but still the same. I tried to go in Settings, Memory, "Install SD" too, but it only tells again that i can remove the sd safely...WHAT THE HELL I WROOOOOOONG?!?!?!?! xD
EDIT: I forgot, i tried to change the ROM too, tried about 5-6 different ROMs but it still doesn't work...

Did you try formatting with Panasonic formatter?
You're just inserting the SD card right? You're not pressing amount SD card in settings right?

Its look your cards r not compatible with HD2 card reader. I had same issue with about 3 or 4 cards.
The best way is to use genuine SanDisk cards !

rikardo1979 said:
Its look your cards r not compatible with HD2 card reader. I had same issue with about 3 or 4 cards.
The best way is to use genuine SanDisk cards !
Click to expand...
Click to collapse
Kailkti said:
Did you try formatting with Panasonic formatter?
You're just inserting the SD card right? You're not pressing amount SD card in settings right?
Click to expand...
Click to collapse
but...it's impossible! simply cuz with wm6.5 and wp7 it works perfectly! And on the PC too! In fact yesterday i came back to wm6.5 and the SD works well...

Just format it. ._.

i've tried to format it in ntfs, fat32 & extFat...don't work.... :'(

fdm91xda said:
i've tried to format it in ntfs, fat32 & extFat...don't work.... :'(
Click to expand...
Click to collapse
hi guys, there is an update: today i woke up and tried again to insert an sd card. If it's formatted in NTFS or in exFat it says "The SD is damaged. Do u want to try to format?". So i answer yes, it formats the card and then says again the same thing "The SD is damaged. Do u....". From there whatever SD i will insert wont work cuz it will say the same thing. If i try to insert a 2GB Sandisk SD it wont work, the same for my 8GB Kingston and everything else. If i flash again the ROM (the same or another) it tells only that I can safely remove the SD card...BUT I DON'T WANT TO REMOVE IT! I WANT TO USE IT!!! xD so i think my problem is something like a "loop". The telephone remembers his last one choiche and whatever I will do it will give me the same response for every SD. If I format it will be the same...
IS IT POSSIBLE THAT I'M THE ONLY ONE PERSON WITH THIS FU*** PROBLEM???

I sometimes have this problem - it sometimes does what you describe or says that the card is Damaged.
The only way i've found to fix this issue is to format the Card on a Linux machine - i have a laptop that i can dual boot with Ubuntu - i remove the partitions on the card and format it fresh to NTFS using the Disk Tools in Ubuntu and it works a charm every time....
Hope this helps - it is a bit of an annoying issue!
Cheers
Paul

paulrgod said:
I sometimes have this problem - it sometimes does what you describe or says that the card is Damaged.
The only way i've found to fix this issue is to format the Card on a Linux machine - i have a laptop that i can dual boot with Ubuntu - i remove the partitions on the card and format it fresh to NTFS using the Disk Tools in Ubuntu and it works a charm every time....
Hope this helps - it is a bit of an annoying issue!
Cheers
Paul
Click to expand...
Click to collapse
THANKS PAUL!!!!! I have BackTrack on my laptop cuz i need it at the university, but it's based on Ubuntu so i'll try to format my sd from there and try to format the sd from there! I'll let u know if I solved the problem! MANY THANKS!!!!!

fdm91xda said:
THANKS PAUL!!!!! I have BackTrack on my laptop cuz i need it at the university, but it's based on Ubuntu so i'll try to format my sd from there and try to format the sd from there! I'll let u know if I solved the problem! MANY THANKS!!!!!
Click to expand...
Click to collapse
Good Luck mate - i know how annoying this issue is!

Can the SD Card be changed on WP7

Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks

michaels0007 said:
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
Click to expand...
Click to collapse
You can change it, but you'll lose everything you've installed and have an out the box phone so to speak.
Well at least that's what happened when I changed from my test SD card to my 8GB

Which Brand memory card do u use?

Hawkeyezghost said:
Which Brand memory card do u use?
Click to expand...
Click to collapse
I use SanDisk

no!!!will not read the new sd,you have to format the new one with the rom you are installing.
N.B: sandisk 8G is highly stable with wp7...

you can switch sd cards without starting over, but then you'd have to copy the partition from your old sd card to your new sd card.
it gets slightly complicated, but only because of the numbers of steps, not technical complications.
use Easeus partition software and try to replicate the exact partitions across the old card and the new card
good luck

bravo261 said:
you can switch sd cards without starting over, but then you'd have to copy the partition from your old sd card to your new sd card.
it gets slightly complicated, but only because of the numbers of steps, not technical complications.
use Easeus partition software and try to replicate the exact partitions across the old card and the new card
good luck
Click to expand...
Click to collapse
Did this work for you? I made a thread about this possibility but nobody knew if it's really working.

Hey there,
my question is the other way. Is it possible to flash an other rom without having my SD in to safe settings and installed apps?
I tested this way:
1. turn off phone
2. pull out the SD
3. boot
My HD2 booted into WP7 and ran a blank WP7 such as it was fresh installed.
Then I turned it off and put the SD back in and booted. It booted into my ol status.
So no I want to if I can flash an other rom, put my already formatted SD with my WP7 settings back in? Is that maybe the best way to safe settings?

olegblochin said:
Hey there,
my question is the other way. Is it possible to flash an other rom without having my SD in to safe settings and installed apps?
I tested this way:
1. turn off phone
2. pull out the SD
3. boot
My HD2 booted into WP7 and ran a blank WP7 such as it was fresh installed.
Then I turned it off and put the SD back in and booted. It booted into my ol status.
So no I want to if I can flash an other rom, put my already formatted SD with my WP7 settings back in? Is that maybe the best way to safe settings?
Click to expand...
Click to collapse
i would test this for you and reply you!!! i didn't think of that before...

michaels0007 said:
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
Click to expand...
Click to collapse
i think this link will explain you how to copy the partitions....and more
http://www.techienote.com/tag/technology

Thanks jianototi,
copying the wp7 partition between different sd cards works very well. The system accepts the copy and wp7 launches with all adjustments, downloads and installed apps.
My question now is: Can I reinstall a fresh wp7 nand and insert my sd from old installation? Will the sd be accepted? Or start wp7 with a virgin system?
regards
caiowa

so if we can move a wp7 from one sd card to another. Should it then not be possible to download from the internet, and just copy to sd-card?
Reason i ask is because i cannot get my wp7 to connnect to pc, so i cant get live services. However there seems to be a version now, where i just need to activate the phone.
If someone uploaded their data, can i download it, and update my wp7 that way?

yes put the new sdcard and restar to factory values

Bareslehm said:
so if we can move a wp7 from one sd card to another. Should it then not be possible to download from the internet, and just copy to sd-card?
Reason i ask is because i cannot get my wp7 to connnect to pc, so i cant get live services. However there seems to be a version now, where i just need to activate the phone.
If someone uploaded their data, can i download it, and update my wp7 that way?
Click to expand...
Click to collapse
i was under the impression that it uses some sort of RAID over the card.
the best way to tell is to copy the card factory rest with one SD card, then swap the cards afterwards. Myguess is that it wont work the way you want it too, i doubt it will "give" you everything back on again.