Related
Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.
did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
I backed up the stock firmware I already had manually, before it prompted on the flash.
did you do a full wipe before flashing the rom?
No i didn't, thought it would be safer incase something went wrong?
run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...
Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.
Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?
you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.
Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?
go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card
Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.
Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that
Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????
sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.
I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...
I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.
ok guys i have completed this for all you rogers customers
this was completed on a rogers locked streak
these are the steps i took
i rooted mine using universal androot (real easy !)
installed fastboot drivers
nandroided using clockwork recovery (the one that worked for me was 1.8.1.7)
then i flashed back to stock recovery
then flashed 02 1.6 (build 4399)
then flashed 02 2.1 (build 8105)
restored apn setting
now im just gonna see if i should do the hyde's 2.2 but from what ive read apps go missing in market so im gonna have to ask around
but yea for all you rogers heads it has been done !!!!
Good job, That's the exact way that I did it. It only took 10 hours or so to finally figure it all out. The one good thing about it is, it was good learning. I came from using HTC phones, they are super easy to flash ROMS with. This streak is a little harder, at least having flash over so many times.
yea i came from a g1 so i know the deal
I sent you a PM asking if you have your nandroid backup handy. If you do can you mirror it somewhere to help me out? I can't find the Rogers build 7921 anywhere to download.
can you make into a update.pkg ?
I sent you a PM asking if you have your nandroid backup handy. If you do can you mirror it somewhere to help me out? I can't find the Rogers build 7921 anywhere to download
Click to expand...
Click to collapse
I actually don't know, but for backup reasons (warranty) it would be nice to have. I can look into making it a pkg for flashing without clockworkmod. Thanks
Ill send it to you by pm gimme a bit
Sent from my Dell Streak using XDA App
Cool thanks
Hey I was hoping you could send it to me as well. I've bricked my streak.
how did you brick it ?
maek_it_happen said:
Ill send it to you by pm gimme a bit
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Ohh, any chance you could send it to me? I have been look for a a way to update my new rogers streak.
maek_it_happen said:
how did you brick it ?
Click to expand...
Click to collapse
I tried doing the update to O2 1.6 so I can do the update to O2 2.1, but now it's stuck on the Dell Logo.
Rogers Streakers unite!
any one of you cats, have issue still with the 720p camera corrupting when the 720p option is selected? This is even after flashing Steve's mbm
Rogers locked streak
Hello guys, I am a newbe and was wondering if one of you gurus can tell me step by step how to do this. I get the Nandroid part, I get lost on the "flashing" stock official Dell ROM, and the other builds. I dont know where to get these or how to do it.
Thanks for your help.
readyfordeals said:
I tried doing the update to O2 1.6 so I can do the update to O2 2.1, but now it's stuck on the Dell Logo.
Click to expand...
Click to collapse
Are you sure your waitng long enuf for it to boot , what recovery did you flash it with , and have you tried to reflash ,i have a nandroid back up for the rogers build , so u can get back to rogers 1.6
Sent from my Dell Streak using XDA App
I dont have that issue on 02 2.1 rom
Sent from my Dell Streak using XDA App
So close...
Hey there! I'm so close I can taste Froyo.... but:
Would love the help of some of the more experienced here. I'm at at dead end.
Goal is to get to Custom 1.4.6 Froyo ROM. Currently I get stuck on a blank screen after trying a O2 1.6 (4399) update from a restored stock recovery. I can restore my nandroid 7921 backup but it come up with a number of errors so not feeling to solid about that. Also says baseband unknown (see below).
What I have done so far:
ii. Rooted with Universal Root (I think - rooted for sure, not sure exactly if it was UR or another, but it said it worked(after 2 trys))
1. Setup Fastboot mode with no problems (no driver problems just worked)
2. Installed clockwork recovery v1.8.1.7
2b. Backed up using nandroid
3. Used fastboot to apply dsp1.bin (720p video) and amss.bin (baseband?) updates for 1.4.6
4. Flashed DJS Froyo 1.4.6
Result was installed fine but on attempted boot the classic stuck at Dell logo. Pretty sure I left it long enough (about 15 min or so). No luck.
5. Restored 7921 backup. Worked but LEDs were flashing (baseband miss match?) and received a 'battery error' (battery charging disabled).
Then saw this thread realized the path to take = Rogers 1.6 -> O2 1.6 -> O2 2.1 -> DJS Froyo 1.4.6 so have set off on that path.
6. Installed Stock Recovery with Fastboot
7. Attempted to flash O2 1.6 (4399). result was a blank screen for a long time (left about 15 minutes)
Soooooo....
Just to prove to myself I wasn't screwed I have since fastboot installed clockwork recovery and restored 7921 nandoid back-up. Only problem seems to be an error stating "sd-ext.img not found. Skipping restore of /sd-ext." It boots now but has that battery error still about not charging.
What I believe I should be doing (goal is still to get to DJS 1.4.6) is:
1. Restore recovery to stock recovery and flashing O2 1.6 (4933)
2. Flash O2 2.1 (8105)
3. Fastboot the recover to clockworks
4. Flash to DJS 1.4.6
But not sure how to get past my blank screen after restore of stock recovery and attempted flashing of o2 1.6 (4933). Have tried 2 different stock recovery images and 2 different o2 1.6 (4933) pkg files.
Would appreciate anyone who can show me the error(s) of my ways.
Thanks so much.
Cheers.
maek_it_happen said:
Are you sure your waitng long enuf for it to boot , what recovery did you flash it with , and have you tried to reflash ,i have a nandroid back up for the rogers build , so u can get back to rogers 1.6
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Is there any chance to upload that nandroid backup for us to access?
thanks
maek_it_happen said:
Are you sure your waitng long enuf for it to boot , what recovery did you flash it with , and have you tried to reflash ,i have a nandroid back up for the rogers build , so u can get back to rogers 1.6
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I waited over noght and nothing. I followed the steps on the general page, but I think my device never got rooted. This is an issue I believe. Please help. I am phoneless kinda right now. I will emt or paypal donate if I can get this thing to work. Really want something other then 1.6. Freak I just want this thing to boot.
paulheth said:
Hey there! I'm so close I can taste Froyo.... but:
Would love the help of some of the more experienced here. I'm at at dead end.
Goal is to get to Custom 1.4.6 Froyo ROM. Currently I get stuck on a blank screen after trying a O2 1.6 (4399) update from a restored stock recovery. I can restore my nandroid 7921 backup but it come up with a number of errors so not feeling to solid about that. Also says baseband unknown (see below).
What I have done so far:
ii. Rooted with Universal Root (I think - rooted for sure, not sure exactly if it was UR or another, but it said it worked(after 2 trys))
1. Setup Fastboot mode with no problems (no driver problems just worked)
2. Installed clockwork recovery v1.8.1.7
2b. Backed up using nandroid
3. Used fastboot to apply dsp1.bin (720p video) and amss.bin (baseband?) updates for 1.4.64. Flashed DJS Froyo 1.4.6
Result was installed fine but on attempted boot the classic stuck at Dell logo. Pretty sure I left it long enough (about 15 min or so). No luck.
5. Restored 7921 backup. Worked but LEDs were flashing (baseband miss match?) and received a 'battery error' (battery charging disabled).
Then saw this thread realized the path to take = Rogers 1.6 -> O2 1.6 -> O2 2.1 -> DJS Froyo 1.4.6 so have set off on that path.
6. Installed Stock Recovery with Fastboot
7. Attempted to flash O2 1.6 (4399). result was a blank screen for a long time (left about 15 minutes)
Soooooo....
Just to prove to myself I wasn't screwed I have since fastboot installed clockwork recovery and restored 7921 nandoid back-up. Only problem seems to be an error stating "sd-ext.img not found. Skipping restore of /sd-ext." It boots now but has that battery error still about not charging.
What I believe I should be doing (goal is still to get to DJS 1.4.6) is:
1. Restore recovery to stock recovery and flashing O2 1.6 (4933)
2. Flash O2 2.1 (8105)
3. Fastboot the recover to clockworks
4. Flash to DJS 1.4.6
But not sure how to get past my blank screen after restore of stock recovery and attempted flashing of o2 1.6 (4933). Have tried 2 different stock recovery images and 2 different o2 1.6 (4933) pkg files.
Would appreciate anyone who can show me the error(s) of my ways.
Thanks so much.
Cheers.
Click to expand...
Click to collapse
yep you should of flashed 02 1.6 first then 02 2.1 then upgraded to 1.4.6
if you can still get to recovery then you should be able to get things running again
my advice would be to try to get your baseband back to normal , not exactly sure how maybe you could find an alternate , also i think that you sd-ext could be solved by re mounting it in clockwork recovery ,ill do what i can to help you , baseband flashing is new to me
Okay... I have seen you alot in the q and a and you seem to be super helpfull.
I was wondering if you could please please please help me!!
let me tell you where i was. Okay so on my mytouch 4g i was running fauxs new 2.3 leak http://forum.xda-developers.com/showthread.php?t=1059379
And i saw that he put out a new kernal. http://forum.xda-developers.com/showthread.php?t=1079754
And i wanted to give it a go. So followed all the steps... wipe cash and dalvik everthing was going perfect. Then it rebooted, and i got stuck in a bootloop. Witch not a big deal just go back to recovery.
Well I did and it went into Hboot it tries to load some image and fails. And then the only option it gives me is to update this radio_v2 thing.
So I think my recovery is broken. PLEASE HELP ( what steps do i need to do now? I havent ever worked with adb or hboot engineering.
I used the visionary root method i had s off
Jerald2 said:
Okay... I have seen you alot in the q and a and you seem to be super helpfull.
I was wondering if you could please please please help me!!
let me tell you where i was. Okay so on my mytouch 4g i was running fauxs new 2.3 leak http://forum.xda-developers.com/showthread.php?t=1059379
And i saw that he put out a new kernal. http://forum.xda-developers.com/showthread.php?t=1079754
And i wanted to give it a go. So followed all the steps... wipe cash and dalvik everthing was going perfect. Then it rebooted, and i got stuck in a bootloop. Witch not a big deal just go back to recovery.
Well I did and it went into Hboot it tries to load some image and fails. And then the only option it gives me is to update this radio_v2 thing.
So I think my recovery is broken. PLEASE HELP ( what steps do i need to do now? I havent ever worked with adb or hboot engineering.
I used the visionary root method i had s off
Click to expand...
Click to collapse
If your computer has an SD reader use a micro SD adapter to delete the pdi15.img from the root of your card. Then you will be able to then boot back into recovery and flash the rom or new kernel again. I hope this helps you out.
Edit: pd151.img
Sent from my HTC Glacier using XDA Premium App
Lol wow - I am in this exact same scenario - placed both kernel and radio on my sd card, flashed the kernel, got stuck at boot loop, and can't get back to recovery to flash the "first time" kernel because hboot only gives me the option of updating radio...
So...I unfortunately don't have an sd card reader on my computer to easily remove the pd15 radio file...is there any way around this? Or is removing the pd15 file from my sd card the only solution??
Ok...I remembered my girlfriend's computer has an sd card reader, I put mine in, and when I try to remove the pd15 radio file, it says it can't be deleted...WTF!? What should I do??
So it looks like the card is "read only" on my girlfriend's computer...but I can't put it into my computer to change the read/write permissions!!! Argh...!!!
I sorted it out....phew! I mounted a different sd card via my phone, fixed the kernel issue by running 'firs time' kernel, and was able to power up phone. Looking good now.
Jerald2 said:
Okay... I have seen you alot in the q and a and you seem to be super helpfull.
I was wondering if you could please please please help me!!
let me tell you where i was. Okay so on my mytouch 4g i was running fauxs new 2.3 leak http://forum.xda-developers.com/showthread.php?t=1059379
And i saw that he put out a new kernal. http://forum.xda-developers.com/showthread.php?t=1079754
And i wanted to give it a go. So followed all the steps... wipe cash and dalvik everthing was going perfect. Then it rebooted, and i got stuck in a bootloop. Witch not a big deal just go back to recovery.
Well I did and it went into Hboot it tries to load some image and fails. And then the only option it gives me is to update this radio_v2 thing.
So I think my recovery is broken. PLEASE HELP ( what steps do i need to do now? I havent ever worked with adb or hboot engineering.
I used the visionary root method i had s off
Click to expand...
Click to collapse
Move the pdm15.zip off you micro card or rename it,thats why you can't get to recovery
Sent from my HTC Vision using XDA Premium App
Fixed!!
I fixed it thanks to you guys! I put my sd card in my moms phone and deleted it then tried agian this time getting into recovery
flashed the first time kernal and worked like a charm. Thanks guys!! One problem I did notice is when i over clocked the phone completely froze any solutions?
Hey I just seriously screwed my self over bassicly I tried to get miui to boot from the samsung fascinate however when I installed it in cmr it spassed out then powered of then went to the bootloader and I get a red error message saying can't mount data or something so then I tried to reinstall Eco 3 Odin using Odin and it worked it booted but it says I have zero data on my phone and I can't install anything. I also tried the oneclick soft unbricker but it fails saying adb divers are not installed when they are. I'm doing this on my phones browser witch is the only thing that seems to be working right now I also tried a band restore but I got the same data error message.
Have you tried restoring to DL17 and then re-upgrading to 2.2?
And how about a good old odin flash?
In worst case, I would ask imnuts for the full odin package, or use a fascinate full odin package to get you off your feet, then reflash the modem, and recovery, then wipe In recovery cyan cwm... Then flash ec03
Sent from my SCH-I400 using XDA Premium App
wait wait, is this on a Continuum or Fascinate?
Nuckin said:
wait wait, is this on a Continuum or Fascinate?
Click to expand...
Click to collapse
He is on a Continuum, but you can use a fascinate Odin package to reformat partitions if they get messed up, then just reflash recovery and start fresh if you can get in then... That wasn't a really good thing though to suggest to a newcomer necessarily, so thank you for pointing that out
okay heres what happened firts i wanted to see if i could get the miui rom for the samsung fascinate to boot on the continuum there pretty much the same phone minus the ticker and screen size so i went into clockwork mod and wiped everything then went to install zip from sd card and clicked on the miui rom witch was the process we always used on the hero. then after i clicked on it, it started to install then my screen started shacking and my phone turned off. when i turned it back on it when to the bootloader and a red error message poped up saying
e:cant mount /dev/blockstill(invalid argument
and when i go to recovery it says the same thing when i try to wipe/restore nand it says the same thing. so at that point i powered off and went to download mode and reinstalled eco3 odin using pda mode on odin and it worked then it rebooted and i got to the set up screen and i got 2 force closes daily brefeing and something else i went ahead and skipped all that stuff and it loaded fine after that. however now for some reason it says i have zero system memory so i cant install any apps or save data however it does recognize my sd card but i cant install to sd card. so bassicly the phone functions just no internal memory. at this point i honestly dont know what to do everything on the hero was simple and straight forward and we never ran into these kind of problems. ive also tried to restore my nands and reinstall clockwork mod but still no dice. what i need to do now i guess is get the necessary files to go completely stock and see if that helps. and if someone could point me in the direction to those files i would really aprechiate it. oh and i tried the one click unbricker it sayed success but didnt really do anything.
oh and i know trying to install miui was stupid but i was just wanting to see if it would boot lol.
Download the PIT file in the Development forum, as well as the DL17 Odin package from the FAQ of the EC03 post I made. Flash the DL17 in PDA, with the PIT, and re-partition selected. After that, you should be back on DL17, and can do whatever you want from there.
huzzza!!!
thank god that worked thank yall so much i still cant believe that just happened but restoring the stock odin image worked and all is well. so i guess tommorow i can reroot and restore my nand.
once again thank yall for the help.
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
As long as you fully wipe using Amon Ra, you should be able to make most updated ROMs run fast on your phone. Perhaps try reflashing Synergy. I also recommend flashing a new ROM, but reinstalling apps without data. Perhaps that is contributing to the sluggishness.
Sent from my PC36100 using XDA App
Thanks.. But I've been told over and over, its sometimes good to revert back to stock..
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Anyone have the stock file??
Do I let it update or no ??
fastfed said:
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Click to expand...
Click to collapse
That's ridiculous. A wipe is a wipe.
In fact, using the RUU (.exe) is riskier since it flashes radios and such, and if something goes wrong during, you have a bricked phone. Just do a full wipe including cache/dalvik cache and install your ROM of choice, along with a good kernel.
fastfed said:
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
Click to expand...
Click to collapse
If you rooted with unrevoked or revolutionary, you will need this file to return to stock, and yes, you will temporarily lose root.
http://dl.dropbox.com/u/38127313/Un....15.00.0808_NV_2.15_release_220182_signed.zip
Change the name to PC36IMG and run it from the root of your SD card through the bootloader. You will lose your root, but your security flag should still be off (S-OFF) so that you can quickly regain root after running this file, after changing it to PC36IMG in place of the first one. (It is Amon-RA and not clockwork. You can reflash clockwork later if you want, which I don't recommend.
http://dl.dropbox.com/u/38127313/Root 2.3.3/PC36IMG3.08.zip
Also, you might need to flash a superuser app, in case you need root inside the stock ROM. Here is an old one, but it should still work for you.
http://dl.dropbox.com/u/38127313/Root 2.3.3/su-2.3.6.2-efgh-signed.zip
Like the previous users said, it's probably not necessary, but I'm just giving you what you asked for.
hmmm.. so now its not necessary ? I was always under that impression..
Ok..
Anyone know what the new HOT rom is ??
Gigerbread please ?
Like I said I was using Synergy..
Used Fresh before and a couple others..
whats the hot rom ??
FYI I also partitioned my SD card, or whatever its called.. For the gigerbread thing..
Put MikG 3.0 on it and call it done. Rock solid ROM, great battery life, and awesome tweaks built in. It will be like an all new phone. Enjoy
Sent from my PC36100 using xda premium
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Use "Best Method" for Cleanest way (Wiping)
OLDER: Froyo v2.2 (3.70.651.1) http://keetsa.com/files/RUU_SuperSo...15.00.11.19_NV_1.90_release_161482_signed.exe
Most Current version is "Gingerbread v2.3.3 (4.54.651.1).EXE" http://www.multiupload.com/LLV12N2WU8
with "xxx.EXE file", You'll need to Run it on Widows and install on Phone thru Micro USB plug.
BEST Method to install Most Current STOCK ROM:
1. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "AmonRa Recovery v3.11-gnm" http://dl.dropbox.com/u/34586908/PC36IMG-ra-supersonic-3.11-gnm.zip
2. (Boot into Recovery), WIPE these 8 lines (All data/factory Reset, /data, /cache, /sdcard/.android_secure, /system, Dalvik-cache, battery stats, rotate settings)
3. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "GB v4.54.651.1.ZIP" http://db.tt/Ck6AB18E
If you want non Stock Recovery + Rooted:
1. Rename your "(AmonRa Recovery v3.11-gnm) PC36IMG.zip" to "PC36IMG.zip" again. (Boot into Recovery +Install). (cus Stock Rom changed you to STOCK Recovery)
2. (Boot into Recovery + Install) "Root (Superuser-3.0.7-efghi-signed).zip" www.mediafire.com/?16a07x3800wvak6
No need to revert to stock.
Use vr superwipe
Save the contents of your sd card to a computer, then reformat the sd card
Wipe everything on the wipe menu, then flash a new ROM.
copy the titanium backup directory back to your sd card and restore apps without data first, then restore data of any games or what not.
Problems should be fixed.
Sent from my PC36100 using Tapatalk
You have a lot of options here. As the preceding posts may have eluded to. Depending on how consistent and deep your issues are, there are different steps that need to be taken.
You can always wipe the ROM and reflash. Do a dirty flash, by just wiping cache and dalvik, then reflashing. That tends to be my temp work around sometimes.
Worst case I've seen is reverting to stock. Unrooting. And starting back over.
With any new ROM you'll need to reflash your mods. Becareful tho of what mods you're using. Not all are compatible across the board.
HipKat said:
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Click to expand...
Click to collapse
Did reformatting the SD card help? I just realized and did the same thing. It had been a good 3-4 from changes and about a year since I formatted my card.
It helps a lot. I reformat mine about every 3-6 months
Swyped From The Hippest MIUI'd phone Using XDA Premium