Related
The files were posted today. Remember to grab the MZ604 files if you have the Wifi only version of the Xoom.
http://developer.motorola.com/products/software/ <------ Grab the files here. The files are for the US version of the Wifi Xoom only.
Instructions to return it to stock
1) First you need the Moto Drivers - Read this thread to START you - http://forum.xda-developers.com/showthread.php?t=981578
Should have these drivers installed if you have rooted your Xoom before.
2) Make sure you have the latest SDK - adb and fastboot should be in /platform-tools - http://developer.android.com/sdk/index.html
Should have the android SDK if you have rooted your Xoom before.
3) Place all the downloaded stock image files into the SDK Tools folder.
4) If you are booting up from scratch, you can get the Xoom in fastboot mode by doing the following. Use command prompt to perform the rest of the steps
Hold VolDown and Power button will boot unit for fastboot mode
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
If you Xoom is booted up already follow the commands below using command prompt to perform the steps
adb reboot bootloader <---- reboots the Xoom into fastboot mode.
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
You noticed this too I see. Glad you posted this as a new thread. I was just randomly posting that link in threads where stock images may have helped.
I'm not home to try it yet but I'm guessing that's a US image?
Ahhhhh finally.
i just followed this process, everything worked on the xoom wifi (US), im back to stock and everything is ok so far.
but im an idiot and pressed vol up instead of down on the last step (oem lock) which aborted the oem lock step. before i did this i was rooted, so i think technically im still rooted.
can i simply go back into fastboot oem lock and try again and press the rightbutton this time to re lock the xoom or would that brick it?
ok thanks guys!
vista64 said:
i just followed this process, everything worked on the xoom wifi (US), im back to stock and everything is ok so far.
but im an idiot and pressed vol up instead of down on the last step (oem lock) which aborted the oem lock step. before i did this i was rooted, so i think technically im still rooted.
can i simply go back into fastboot oem lock and try again and press the rightbutton this time to re lock the xoom or would that brick it?
ok thanks guys!
Click to expand...
Click to collapse
If you want to be extra safe, start over from the beginning. You're probably still unlocked (but not rooted) if you managed to flash boot and system.
i have error failed to boot lnx 0x0004 - starting rsd mode 2
can i use this file ??
DinarQ8 said:
i have error failed to boot lnx 0x0004 - starting rsd mode 2
can i use this file ??
Click to expand...
Click to collapse
Only if you can get into fastboot mode AND your computer can see it. But if I recall, neither ADB, Fastboot nor RSD Lite will see your Xoom?
maybe solution i wait SBF file
Hi Scourge1024,
Are you going to try and flash the images to your Canadian Xoom AND then see if you can OEM re-lock it again??
I haven't been able to find out if all the WiFi images ie US, Canadian or European are all interchangeable on a Wifi only xoom??
I guess what I'd like to know is, if I ever wanted to re-lock my UK xoom, could I simply flash the Motorola MZ604_HWI69 files, then oem re-lock OR would have to wait for European Motorola backup files?
Cheers
Ody
what he said ^
Just tried downloading the Wi-fi files... On both my Mac and PC, it's saying it can't extract the ZIP. Crap crap crap crap crap...
If i remember correctly, scourge said that both devices are exactly the same hardware. Therefore flashing either version's set of images is irrelevant as long as you do WIFI for that model and 3G for that one.
odyseus said:
Hi Scourge1024,
Are you going to try and flash the images to your Canadian Xoom AND then see if you can OEM re-lock it again??
I haven't been able to find out if all the WiFi images ie US, Canadian or European are all interchangeable on a Wifi only xoom??
I guess what I'd like to know is, if I ever wanted to re-lock my UK xoom, could I simply flash the Motorola MZ604_HWI69 files, then oem re-lock OR would have to wait for European Motorola backup files?
Cheers
Ody
Click to expand...
Click to collapse
Nope. I'm done being the guinea pig (with the OEM locking). I bricked my first Xoom trying to OEM lock it. I managed to lock it a few times. Then I tried a different boot.img and bricked...
Personally, I have no issues flashing the US image on. It's just the re-locking. There's really no point to relock it. The Americans with the 3G/4G Verizon ones had to be able to relock for a hardware upgrade. I have managed to flash US images onto my Xoom but they were extracted by BeagleBoy here. I posted a comparison here: http://forum.xda-developers.com/showthread.php?p=13070124
The software is interchangable between the MZ604 Xoom models (Wi-fi only). There are a bunch of other Brits using the Canadian images I extracted from me and my friend's XOOMs. I've used the US ones. You just need to do a "fastboot -w" after flashing both the system and boot images because going between versions sometimes requires userdata to be wiped.
Scourge1024 said:
Just tried downloading the Wi-fi files... On both my Mac and PC, it's saying it can't extract the ZIP. Crap crap crap crap crap...
Click to expand...
Click to collapse
FYI,
$ md5sum MZ604_HWI69.zip
ae9b9f5693c4b49c745cb017afe1a4b5 MZ604_HWI69.zip
$ unzip -t MZ604_HWI69.zip
Archive: MZ604_HWI69.zip
warning [MZ604_HWI69.zip]: 36325409 extra bytes at beginning or within zipfile
(attempting to process anyway)
testing: MZ604_HWI69/boot.img OK
testing: MZ604_HWI69/recovery.img OK
testing: MZ604_HWI69/system.img OK
testing: MZ604_HWI69/userdata.img OK
No errors detected in compressed data of MZ604_HWI69.zip
You might be OK if you can get something that'll handle errors better.
In Windows, WinRar worked. On my Mac, I did what you posted and well, it seemed to work. I also did a compare against BeagleBoy's ripped images and boot was perfect. System was 1 byte off. Maybe a counter for the file system being mounted?
Code:
mac-mini:mz604_img Howard$ md5 MZ604_HWI69.zip
MD5 (MZ604_HWI69.zip) = ae9b9f5693c4b49c745cb017afe1a4b5
mac-mini:mz604_img Howard$ unzip -t MZ604_HWI69.zip
Archive: MZ604_HWI69.zip
warning [MZ604_HWI69.zip]: 36325409 extra bytes at beginning or within zipfile
(attempting to process anyway)
testing: MZ604_HWI69/boot.img OK
testing: MZ604_HWI69/recovery.img OK
testing: MZ604_HWI69/system.img OK
testing: MZ604_HWI69/userdata.img OK
No errors detected in compressed data of MZ604_HWI69.zip.
mac-mini:mz604_img Howard$
Scourge1024 said:
In Windows, WinRar worked. On my Mac, I did what you posted and well, it seemed to work. I also did a compare against BeagleBoy's ripped images and boot was perfect. System was 1 byte off. Maybe a counter for the file system being mounted?
Click to expand...
Click to collapse
Yep, IIRC, ext maintains a mount count. One'd need some file system tools to properly verify.
Can someone post a walk through on how to do this?
pricej636 said:
Can someone post a walk through on how to do this?
Click to expand...
Click to collapse
from the op:
Instructions to return it to stock
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
Scourge1024 said:
Nope. I'm done being the guinea pig (with the OEM locking). I bricked my first Xoom trying to OEM lock it. I managed to lock it a few times. Then I tried a different boot.img and bricked...
Personally, I have no issues flashing the US image on. It's just the re-locking. There's really no point to relock it. The Americans with the 3G/4G Verizon ones had to be able to relock for a hardware upgrade. I have managed to flash US images onto my Xoom but they were extracted by BeagleBoy here. I posted a comparison here: http://forum.xda-developers.com/showthread.php?p=13070124
The software is interchangable between the MZ604 Xoom models (Wi-fi only). There are a bunch of other Brits using the Canadian images I extracted from me and my friend's XOOMs. I've used the US ones. You just need to do a "fastboot -w" after flashing both the system and boot images because going between versions sometimes requires userdata to be wiped.
Click to expand...
Click to collapse
Fair do's - I don't blame you! You've done enough As you say why re-lock on WiFi?
What I would really like to do is flash all the images to my UK WiFi Xoom and then try to install Bignadad's BigDX Xoom|Zoom Theme..
Previously flashing this theme soft-bricked my UK xoom - got loads of Force Closures. Installing the extracted images from you, still caused the same problem. Maybe it only works on the US WiFi Xoom, but I might re-flash with 'stock' ROM to see if that makes any difference? (I do have CWM nandroid backups in case of another soft brick!)
Cheers
Ody
Is there a risk with using these cause of zip extra bytes warning?
I just try to root my new nexus player and I don't know what happened there.
After success installation tried to install SuperSu and rebooted it. And device still loading I don't know why?
I did it in MAC OSX Yosemite
I have this screen already 4 hours
What should I do here
Not dead, it just bootloops (softbrick)
Get familiar with fastboot and bootloader mode
google or youtube on how to start the nex player in bootloader mode.
Download the latest image from Google here https://developers.google.com/android/nexus/images#fugu
Untar and unzip the .img files. You should be able to flash the system via fastboot
Command is:
fastboot flash system "path/to/system.img"
I tried Chainfires root method and the same thing happened to me, I don't think he's updated root for 5.1.1 yet. Using ADB
Download the image from above and follow the commands in terminal. They all start with ./
fastboot flash bootloader <drag bootloader image from finder to here>
fastboot reboot-bootloader
sleep 5
fastboot -w update <drag image zip from finder here>
tomalak007 said:
fastboot -w update <drag image zip from finder here>
Click to expand...
Click to collapse
You can do this command without the -w flag and it'll leave your /data/ partition intact. That usually fixes things. Then you can boot chainfire's root image to get root back. But updating the binaries will get you stuck at the boot screen. I actually had to go through this myself when I flashed the 5.1.1 factory image.
Right after booting from the root image, i had a similar problem. I turned it off and turned it back on and it worked. Chances are you either flashed boot.img or system.img so i don't think you should have a problem reflashing if you still can't boot after restarting. Also you may need to wipe in recovery.
i am having same problem also please tell us how to fix this .
Not dead. Which guide did you follow?
I used the WonderHowTo site incorrectly to flash a nexus 5 version of twrp unto my nexus 4.
My device at this point booted to a blank screen. It could still boot the boot loader at this point.
To "fix" this I found the correct version of twrp for my device and proceeded to flash that unto my device.
This has appeared to work since I can access twrp on my device but it is only thing I can access on the phone. When I attempt to boot to system through twrp I am sent back into twrp.
I have attempted to use the wugfresh root tool kit to unroot and return to stock using both soft bricked and phone is still working normally options with no success.
It can still boot to the boot loader currently.
I have logs from the toolkit if these can shed more light on my issue.
Is there anyway I can return my device to stock? Thanks for any response
Flash factory image
https://developers.google.com/android/nexus/images#occam
attempted
attempted to flash stock and got the following error message
error: neither -p product specified nor ANDROID_PRODUCT_OUT set
Seems like you flashed TWRP to /boot. Easy fix is to download your ROM zip. Extract the boot.img and "fastboot flash boot boot.img". Then flash TWRP with "fastboot flash recovery twrp.img"
The locations and filenames of the files may vary. But hopefully you get the idea.
codebam said:
Seems like you flashed TWRP to /boot. Easy fix is to download your ROM zip. Extract the boot.img and "fastboot flash boot boot.img". Then flash TWRP with "fastboot flash recovery twrp.img"
The locations and filenames of the files may vary. But hopefully you get the idea.
Click to expand...
Click to collapse
I flashed a boot image for mako_KTU84P and flashed recovery again with twrp but I'm still system booting into twrp.
My bootloader version is MAKOZ30f if that is any help
I probably flashed the incorrect boot image. Could you point me in the direction of reliable ROM zip's if that is the case.
MrTalk said:
I flashed a boot image for mako_KTU84P and flashed recovery again with twrp but I'm still system booting into twrp.
My bootloader version is MAKOZ30f if that is any help
I probably flashed the incorrect boot image. Could you point me in the direction of reliable ROM zip's if that is the case.
Click to expand...
Click to collapse
Okay adb push a cyanogenmod zip from here and flash it in recovery. It should automatically install a working boot image. You should also flash the latest bootloader in the factory image with "fastboot flash bootloader bootloader.img" if you're using an outdated bootloader.
used the advice
I pushed the zip file using cmd and it appears to have been successful since I was given the summary of data transferred and how long it took once the process was finished.
I can't find the zip file in twrp to attempt to flash it.. Is there any reason the file name would change inside the device once it has been pushed?
Is there a way to flash the zip in question without pushing it unto the device?
Hi,
is it possible to relock the bootloader to original factory mode.
fastboot oem lock (will erase userdata)
Also you should restore the fbop partition: /dev/block/bootdevice/by-name/fbop
For more reference see:
https://forum.xda-developers.com/axon-7/help/lock-unlocked-bootloader-t3444044
https://forum.xda-developers.com/showpost.php?p=68738854&postcount=100
Also please don't open a thread to a question that has already been answered several times.
After i unlocked bootloader my phone now is recognized as A2017U. When i relock it will it then recognized as original A2017G ?
I am interested in a tutorial about going back to stock for G model
The procedure for the g model is no different than the U model except you have to revert the bootloader (fbop partition) because the european model is quite restricted.
For making a tutorial I would need to know exactly what you modified.
There are already good step by step guides in this forum. All I could offer you are my backup files for the recovery and bootloader for the 2017G with update B08.
Bomberus said:
The procedure for the g model is no different than the U model except you have to revert the bootloader (fbop partition) because the european model is quite restricted.
For making a tutorial I would need to know exactly what you modified.
There are already good step by step guides in this forum. All I could offer you are my backup files for the recovery and bootloader for the 2017G with update B08.
Click to expand...
Click to collapse
At the moment i am on B09 rooted but I installed it via TWRP using DrakenFx's tutorial from here : https://forum.xda-developers.com/showpost.php?p=68873485&postcount=3
Futhermore when I unlocked the bootloader I was on B03 and I saved the aboot.img and fbop_lock.img .
Now I would like to go back to fully stock to prepare for the android N update.
I would highly appreciate it if you could offer me some directions for this matter.
Never tried this method (so I take no responsibility) but in order to receive ota you need an unmodified system with locked bootloader.
To lock your bootloader:
First backup all your apps, data and internal sdcard !
Connect your phone to a PC and start adb:
Type: "adb reboot bootloader"
Phone will restart: (if you are on linux, run fastboot with root permission)
Type: "fastboot oem device-info" (just to check things)
"fastboot oem lock" (will lock your bootloader)
According to DrakenFX you should have the stock recovery already installed. So you can flash a sd card upgrade from ZTE "http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6" (to bring you back to stock)
If you still have TWRP use DrakenFX files to flash your system back to stock, but this time do not flash supersu.
You should be good to go and just have to wait for ZTE to release the update and apply it via the updater UI.
BTW this is my fastboot oem device-info output:
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.059s]
finished. total time: 0.059s
Click to expand...
Click to collapse
dodo34 said:
Hi,
is it possible to relock the bootloader to original factory mode.
Click to expand...
Click to collapse
You mind my asking the reason WHY you want to Relock?
If is cuz the N update , I'll rather keep it unlock base on @lokissmile thread and I'm 100% sure I'll be releasing N TWRP Flashable Zips for all variants when N is available.
i have G model and flashed the aboot of the U modell.
How to flash back now the aboot of the G modell back ?
Any help for the G modell ?
dodo34 said:
Any help for the G modell ?
Click to expand...
Click to collapse
as far my understanding the G model have factory images right? just download the one you were using and flash it using custom recovery.
LifeSupportZ said:
as far my understanding the G model have factory images right? just download the one you were using and flash it using custom recovery.
Click to expand...
Click to collapse
@dodo34
This is correct, the full image should be the one that contains both the emmc_appsboot.mbn (this is your aboot or bootloader partition) and the fastboot.img (the fbop or fastboot command partition) as well as recovery.img. This will set everything back to stock in one swoop. Otherwise you have to reflash the signed (tenfars) TWRP to flash back the fastboot image and then falsh back stock, since regular TWRP will either not be there anymore or will not run since BL is locked now
P.S, you can leave the fastboot alone for the purposes of OTA, no update so far hes checked on it and i am not sure if there is a G package with it since it has not changed from release, so as long as the image you flash has the bootloader and recover you should be good for N
P.S.2 Actually I see a little catch 22 here. If you lock the BL first, then you will not be able to run TWRP or boot into system if it was modified. You would need to flash the "signed" version of TWRP or flash stock recovery before locking the BL. Stock would be preferable since it can flash the factory package withouht modifications. If using TWRP i think you have to change updater-script to remove a .... and i just found another catch 22. The updater-script will look for product name P996A04 and if yours shows as 2017U the it will report back P996A01 so you will have to have a signed TWRP on there no matter what. Either to flash the backed up aboot fbop and recovery and then flash the full factory package through stock recovery or mod the updater-script and remove the assert line and flash the whole thing with TWRP. What do you get in TWRP shel when you run this "getprop ro.product.model"
peramikic said:
@dodo34
This is correct, the full image should be the one that contains both the emmc_appsboot.mbn (this is your aboot or bootloader partition) and the fastboot.img (the fbop or fastboot command partition) as well as recovery.img. This will set everything back to stock in one swoop. Otherwise you have to reflash the signed (tenfars) TWRP to flash back the fastboot image and then falsh back stock, since regular TWRP will either not be there anymore or will not run since BL is locked now
P.S, you can leave the fastboot alone for the purposes of OTA, no update so far hes checked on it and i am not sure if there is a G package with it since it has not changed from release, so as long as the image you flash has the bootloader and recover you should be good for N
P.S.2 Actually I see a little catch 22 here. If you lock the BL first, then you will not be able to run TWRP or boot into system if it was modified. You would need to flash the "signed" version of TWRP or flash stock recovery before locking the BL. Stock would be preferable since it can flash the factory package withouht modifications. If using TWRP i think you have to change updater-script to remove a .... and i just found another catch 22. The updater-script will look for product name P996A04 and if yours shows as 2017U the it will report back P996A01 so you will have to have a signed TWRP on there no matter what. Either to flash the backed up aboot fbop and recovery and then flash the full factory package through stock recovery or mod the updater-script and remove the assert line and flash the whole thing with TWRP. What do you get in TWRP shel when you run this "getprop ro.product.model"
Click to expand...
Click to collapse
if he mod the updater_script from official zte update to make it flash friendly, this is what i'll do,
* Mod updater script and remove aboot and recovery for now
* flash new zip without file mention above
* boot to bootloader while having custom recovery
* lock back the bootloader
* boot to custom recovery and perform " format data "
* create a flashable zip with stock aboot and recovery
* flash new zip with aboot and recovery
* reboot to recovery and check if boot to stock recovery and while in there perform a factory reset
i know is a lot of steps but, seems like is the way to go to get everything back in place without zte noticing anything.
Now i am on B06.
I put update.zip B08 and select update. But it boots to TWRP recovery and update fails.
@dodo34 If you are trying to restore from the OS system update you need to reflash your stock recovery for it to work properly. Wait for someone to confirm what I just said, but that's how it worked for me.
how can i flash my original recovery. what is the command for cmd ?
Please help restoring back original recovery.
dodo34 said:
Please help restoring back original recovery.
Click to expand...
Click to collapse
rczrider said:
Putting Your Axon 7 Back to Stock
If you want to revert back to stock and re-lock your bootloader (eg. sending the phone in for warranty work or are selling it), you should be able to do that using the steps below. It worked for me, anyway, exactly as written below.
Copy everything off your internal storage that you don't want to lose. If you're not rooted (so already stock, but with unlocked bootloader), skip to step 6 below. Otherwise, continue.
Grab the "StockSystem" zip for your variant from this thread and place on your microSD card: http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
Reboot into TWRP and wipe system, data, dalvik, and cache
Flash the StockSystem zip and power off (doing so will restore stock boot but does not appear to restore recovery)
Boot into EDL mode and flash stock recovery only: http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
Power off the phone, plug from computer, and then boot into stock recovery (hold Vol+ and press Pwr, continue holding Vol+ until recovery comes up)
Select "Wipe data / factory reset" and then "Yes"
After that finishes, select "Reboot to bootloader"
Plug in your phone into your computer and do: fastboot oem lock (see second post if this doesn't work and says <waiting for device>)
Your phone will reboot and should have been totally wiped (including internal storage) by doing the above
This should leave you with a stock, locked, and unrooted phone that can take OTAs. Note: it's possible (in fact, likely) that an OTA could break the ability to unlock your bootloader and gain root again, so be careful about going back to stock if you think you'll want to unlock/root later on!
If you need any stock files for B20 or B27 (stock recovery for re-locking, for example), you can get them here: http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Click to expand...
Click to collapse
Try this guide from newbie unlock thread.
I get this error.
C:\Users\Intel\Downloads\Axon7\ADB>axon7tool -r
Usage:
axon7tool -r <boot|recovery|gpt> ...
axon7tool -w <boot|recovery>
C:\Users\Intel\Downloads\Axon7\ADB>axon7tool -r recovery
Connecting to device...
S: failed to read command
S: Failed to receive hello
terminate called after throwing an instance of 'std::runtime_error'
what(): error: Unknown error
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
what i did.
Flashed Draken TWRP System Image B06
Flashed Draken TWRP Stcok Recovery B06
Flashed full update.zip B08
Now my phone is recognized as A2017G on the PC
But when i reboot the phone i get a message that the phone is unlocked and not trusted ?
why ?
Just an FYI type thing that may save people a bit of digging around sometime.
I tried to get the update that just came out, but as i had TWRP as recovery, no good. Anyhow, in my trying i completely bollixed the phone. Would start, but always booted to TWRP and had various conniptions. Could not even get a TWRP backup to load. Strange not encountered before by me stuff............
Anyhow, recovered by the following method to stock and am back in business.
Boot into bootloader fastboot mode.
Extract .xml.zip format firmware file:
eg: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
to a folder on c drive of the PC that has the ADB and fastboot files in it.
In command prompt cd\ to that directory.
fastboot flash the following in sequence.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash system system.img_sparsechunk4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
boots to stock .
Not my own work, adapted from this thread by t-bon3
https://forum.xda-developers.com/showthread.php?t=2542219
which I found thanks to eens post18 at this thread
https://forum.xda-developers.com/g5/how-to/npp25-137-33-stock-firmware-moto-g5-t3577084/page2
After this, Motorola system update installed. On Australian XT1676 is build number NPP25.137-15-7
Patch level 1-May-2017
Still get the I cant be trusted page on power up as have unlocked bootloader.
Many thanks to all at XDA, its a resource that can certainly get you into trouble, but then out of it again.
where do you get the stock firmware?
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
We're you able to revert to a locked bootloader after this, I am looking forward to do so
We're you able to revert to a locked bootloader after this, I am looking forward to do so
Click to expand...
Click to collapse
didnt try, didnt need to for taking take the update.
And, from my reading there is no way so far to relock the bootloader. I got it to stock, with stock recovery, and that was enough for me.
astmacca said:
didnt try, didnt need to for taking take the update.
And, from my reading there is no way so far to relock the bootloader. I got it to stock, with stock recovery, and that was enough for me.
Click to expand...
Click to collapse
I can confirm what you said, but I am asking because I am sick of the warning before the device starts
ap4ss3rby said:
I can confirm what you said, but I am asking because I am sick of the warning before the device starts
Click to expand...
Click to collapse
You can get rid of that easily
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
TheFixItMan said:
You can get rid of that easily
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
Click to expand...
Click to collapse
Thanks, but this is why I made a Google pixel themed logo.bin and used a matching boot animation to go with it some time earlier
downgrade
thanks for the guide
- can i use this method to downgrade to this version?
- can i do this without unlocking the bootloader
- if it goes wrong can i unlock the bootloader later (i have an unlock code)
- is there a reason why we don't flash sparsechunk.0 ?
thanks in advance
distclean said:
thanks for the guide
- can i use this method to downgrade to this version?
- can i do this without unlocking the bootloader
- if it goes wrong can i unlock the bootloader later (i have an unlock code)
- is there a reason why we don't flash sparsechunk.0 ?
thanks in advance
Click to expand...
Click to collapse
No you cannot downgrade (same firmware version or newer required)
Yes - unlocked bootloader not required
As long as your phone still goes into the bootloader
You should flash all sparsechunks in number order
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
distclean said:
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
Click to expand...
Click to collapse
You maybe able to - there are different variants of the same phone
As long as the firmware is the same or newer (as in the bootloader and API version) it may flash
It will either flash or error out
There's only one way to find out - if your phone is dead anyway it's not going to make alot of difference
No - generally you can never downgrade firmware - doing so would be dangerous and you may loose the bootloader for good
thanks again,
motoboot.img is the bootloader you talk about? is the partition layout described somewhere? would custom roms use a different one here?
do tell me by the way if i should get this information elsewhere/if i should read something to get started in the whole moto g world.
distclean said:
thanks again,
motoboot.img is the bootloader you talk about? is the partition layout described somewhere? would custom roms use a different one here?
do tell me by the way if i should get this information elsewhere/if i should read something to get started in the whole moto g world.
Click to expand...
Click to collapse
You can write in adb
Code:
adb shell
cat /proc
cat /proc/partitions
Hello,
Does anyone know where can I download the latest firmware for Moto G5 XT1676 baseband Version: m8937_ 8000.122.02.40 R
Thanks
astmacca said:
Boot into bootloader fastboot mode.
Extract .xml.zip format firmware file:
eg: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
to a folder on c drive of the PC that has the ADB and fastboot files in it.
In command prompt cd\ to that directory.
fastboot flash the following in sequence.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash system system.img_sparsechunk4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
boots to stock .
Click to expand...
Click to collapse
You're partially right. These commands won't work for our files. You have to flash the firmware according to the instructions contained within the "flashfile.xml" file within the archive. For example we have no "motoboot" partition
I've flashed every stock package available now (4 I think) and haven't been offered an update once. I've ran a couple of custom ROMs but they're just not right in one way or another. Might be time to move on.
distclean said:
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
Click to expand...
Click to collapse
I upgraded to this and since then can't downgrade the phone to the stock roms available online. From memory trying to flash gpt.bin gave a "Security version downgrade" error. So I wouldn't assume you'll be able to downgrade and until there is a copy of this particular firmware, you won't be able to flash back or relock the bootloader
astmacca said:
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
Click to expand...
Click to collapse
Is this ROM is good to my XT1676 Baseband: M8937_11.16.02.51R ?
astmacca said:
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
Click to expand...
Click to collapse
Hi, i own the same model of moto g5, i do this in fastboot window
fastboot erase userdata
now the phone only boot in twrp and show a message "failed to mount /data". i think that delete my userdata partition, how could i fix it?
once i can avoid this loop in twrp, i follow these steps to flash stock rom
thanks in advance
juan