[Q] Can't install ADB driver on wildfire - Wildfire General

i need to install ADB driver for my PC and i have a wildfire phone so i did try with windows XP SP and Windows 7 64bit both can't detect my ADB driver files....
(I set the path of drivers) how do i fix this
and i have a another question i unlocked my phone using a unlock code so my current version is 2.1 if upgrade or root my phone is that possible to get it lock back again
Help me

All you need is complete and calm reading of stickie " complete wildfire index",
But sure i can give you a fast anz. The simplest way is to get android sdk, or htc sync from corresponding sites. They will help you with drivers. Or google for android adb drivers, you will get it. There are different drivers for an android phone, such as fastboot drivers( the one installed when you enter fastboot on your phone) and normal adb driver( when you connect phone in debugging mode) so determine and explain your need, so that we can help more accurately.
Also you can root with out any problem, actually you can even put custom rom too.
Sent from my HTC Wildfire using XDA App

thanks for your reply showlyshah i figure it out and thanks again you save me

Related

ADB does not find device

Hi all,
I've searched the forums (honestly), but I can't find an answer to my problem.
I have a Vodafone branded 32B phone.
I installed the AndroidSDK as supposed to, added the path, made the phone root, booted into the recovery console using fastboot and flashed my phone with different operating systems... but during all this time I hever got ADB to work.
Whatever I do, adb never finds the phone. Fastboot works and finds it, when it's in fastboot mode, but ADB never. So, I can't permanently install the recovery console nor do any of the other funky stuff.
ADB doesn't work when the phone is in fastboot mode nor normally operating. I have USB Debugging turned on. The phone works normally and I can access the SDCard just fine.
Any help?
Suggestion.
Look into purchasing a G1 to be kept as a spare and used for development. That's what I've done with my G1. GParted is within most recovery images nowadays, therefore you can do most anything there, well...important functions that is. Keep that in mind.
You might need to uninstall the driver that recognizes your phone, then manually install the updated driver.
Reignzone said:
You might need to uninstall the driver that recognizes your phone, then manually install the updated driver.
Click to expand...
Click to collapse
that's what i had to do to get it to recognise my phone.
i'm pretty sure the driver came with SDK. either way i've attached the one i used.
go into device manager and update the driver it's currently using with the attached one.
Incorrect driver.
It should be the 1st driver listed in the Android SDK file.
As far as I know, you could also choose to push ADB to your system32 file folder under the C: drive in your computer. That is if you're using a Windows machine.
just a thought
Are you on windows or linux? If you're in ubuntu try sudo adb ... the default unprivilaged user doesnt automatically have access to the device.
If you're in Windows I would uninstall the Android Phone device in device manager and reboot with the phone disconnected. Then connect it and install the usb driver from the sdk when prompted. Might also pay to download the sdk again.
Install HTC Sync
Another known way to fix the issue is to download and install HTC Sync http://www.htc.com/au/SupportViewNews.aspx?dl_id=573&news_id=169
This seems to install the correct drivers
For more info check the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking#sec02
Hey Guys,
Forgot to mention I'm on Windows Vista 64 bits.
That last suggestion did the trick. I went to the site and downloaded the HTCDriverUpdate_Vista_64bits.exe, and within seconds I had an ADB connection.
Thanks for your help!

adb with 2 Magics doesnt work.

Hi,
I want to use 2 magics on my pc via adb. My first one (now with android 2.1) works ok via adb. (it worked all the way from 1.5 to 1.6 to 2.1)
Now my gf has a Magic too, With a rootet 1.6 fw.
It gets recocnized as masstorage (yes usb debug is enabled )
but it wont get found in adb (adb devices)
I dont know what to do, somehow i cant install ne drivers. but i dont understand why i would need new ones as it is the same devices (ith same SPL)
anyone knows something?
thanks in advance
Give this a go, it worked for me.
First download USBDeview - http://www.nirsoft.net/utils/usbdeview.zip
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers

trouble installing mytouch 1.2 usb driver plz help

so I have used USBDeview a million times to uninstall all the HTC drivers and then plug the phone in to install the drivers then I click on "Locate and install driver software (recommended)" then continue when asked for admin permission and then I get an error message thats pretty long but it sais
"newdev.exe - Dab Image" on the corner then
"C:\Windows\system32\wdfcoinstaller01005.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support"
I click Ok and then it loads for a bit and then tells me it encountered a problem installing (clearly) I've searched all over the forum and googled too but all I get are instructions on how to install but no trouble shooting
I have a mytouch 3g 1.2 and Windows Vista.
Bump
I too have vista and using the same steps. instead USBdeview doesn't seem to remove the drivers. but after I hiut uninstall I unplug and re plug my phone and Vista prompts me to install drivers. only it cant find them and the unlockr doesn't list the right usb drivers and I cant find them.
So in a nutshell I cant do ADB cause it cant find my phone. obviously, in debugging mode and not in debugging mode.
Should I try doing all this in Linux?
Linux will recognize it, you still have to "mount" the device by pulling down the "taskbar" and mounting.
Senkowa said:
Bump
I too have vista and using the same steps. instead USBdeview doesn't seem to remove the drivers. but after I hiut uninstall I unplug and re plug my phone and Vista prompts me to install drivers. only it cant find them and the unlockr doesn't list the right usb drivers and I cant find them.
So in a nutshell I cant do ADB cause it cant find my phone. obviously, in debugging mode and not in debugging mode.
Should I try doing all this in Linux?
Click to expand...
Click to collapse
running as Admin?
This happened to me.
Senkowa said:
Bump
I too have vista and using the same steps. instead USBdeview doesn't seem to remove the drivers. but after I hiut uninstall I unplug and re plug my phone and Vista prompts me to install drivers. only it cant find them and the unlockr doesn't list the right usb drivers and I cant find them.
So in a nutshell I cant do ADB cause it cant find my phone. obviously, in debugging mode and not in debugging mode.
Should I try doing all this in Linux?
Click to expand...
Click to collapse
Try downloading HTC Sync and installing it. Then plug your phone in and it will install the drivers. Worked like a charm for me
yes, download the new HTC Sync from the HTC website, 2.0.33 and it will work fine.
Or version 2.0.25
-------------------------------------
Sent via the XDA Tapatalk App

HTC Legend USB drivers

I got an HTC Legend that is branded to Vodafone. Trying to debrand it and following the Unlockr instructions--but the first thing to do is to set up android adb and load the windows drivers. I found the Windows drivers it did not work. I then found online a guy with advice on the two lines you need to add to the inf file--but it still does not work. I am on windows XP and getting frustrated because it looked like it copied over some driver files but it still is not recognizing the Legend.
Next I tried it on a mac but could not even find the USB drivers for mac. Google has now separated the inf file from the adb download. So the phone does not install itself automatically. So when i type "ADB devices" I don't get my phone serial number. So I am stuck. Any advice on how to do it with the Legend? All suggestions gratefully accepted.
Thanks
Jeff in Cali.
ferry99 said:
I got an HTC Legend that is branded to Vodafone. Trying to debrand it and following the Unlockr instructions--but the first thing to do is to set up android adb and load the windows drivers. I found the Windows drivers it did not work. I then found online a guy with advice on the two lines you need to add to the inf file--but it still does not work. I am on windows XP and getting frustrated because it looked like it copied over some driver files but it still is not recognizing the Legend.
Next I tried it on a mac but could not even find the USB drivers for mac. Google has now separated the inf file from the adb download. So the phone does not install itself automatically. So when i type "ADB devices" I don't get my phone serial number. So I am stuck. Any advice on how to do it with the Legend? All suggestions gratefully accepted.
Thanks
Jeff in Cali.
Click to expand...
Click to collapse
if your trying to use the android drivers you have to add a htc legend section into the drivers .inf file when you download the android sdk run the setup and only accept the driver then edit the .inf with your legend hardware ids and then it installs perfectly, this method works on both xp and win7
driving me nuts
could you show me how to do this please?
pics would be nice.
i'm also struggling to get my legend detected by any OS (XP, 7 x64, ubuntu x86).
doesn't seam to matter what i use (htc sync 2.0.33, PDAnet, drivers from websites - i've tried them all) i just can't get them to install and recognise my legend.
the thing i find a little worrying is that linux wont even pick up my legend in disk drive mode.
Hi, if you have installed htc sync it also installs the usb drivers.
after you install, unplug usb cable from phone, reboot computer.
after computer reboot plug in usb, hardware wizard shoud find a whole heap of new devices "android phone, adb. etc... on phone go into htc sync mode, more devices should be detected too. if none of these things happen you may have a usb device conflict with other usb devices connected (I had problems with a vodadfone wireless broadband dongle conflicting with other usb devices).
I have a legend with HBOOT 1.01 and i followed a guide on here
[guide] how to root HBOOT 1.01
I followed most of the steps (I didn't restore the backed up misc_backup.img) and the only problem i had was after i downgraded from froyo i needed extra drivers which are called "android 1.0". other than that I had no real issues that a reboot of computer didn't fix.
Hope this helps

[HELP] How to unlock Nokia Lumia 535(windows 10) and install custom rom in it?

Hello,
I am a noob in android and windows flashing.So i have only some basic knowledge about android flashing.
I have a Nokia Lumia 535 OS win10. I want to know how to unlock its bootloader and install custom roms in it.I also want to know how to enable usb debugging in my device because its not detected by the adb devices command in cmd when i connect my device to the pc.And also when i connect it using wconnect.exe usb(using a usb cable) and after I enter the pairing key I always get an error which says"Bootstrapping the device(error code 8) so i am not able to connect it to the pc install android apps on it.(I have already downloaded the required files and extracted in into a folder and I have already changed the cmd directory to that folder).I have searched the forum but I did not find anywhere how to fix this error code 8,i,i,bootstrapping the device.
Any help would be appreciated.
Many Many Thanx in advance.
i think Microsoft had stooped working on android in there lumias phone.so lets wait maybe in the next update they will make an easy method to make android apps working on lumias phone with win10.

Categories

Resources