hey got a 16gb class6 card and it dont work ?
is it because class6 because my old 8gb class4 working perfect..
No mine and lots of others use 16bg x6 sd cards.
Try putting it into a card reader deleting all the partitions and reformating use something like EASEUS free edition don't forget its a primary partition of fat 32
You may also like to reinstall your rom
Related
I've come across a little SD recovery app for 4GB cards that were partitioned for 2GB.
This is a transcend app, and they state its only for their X150 SD card, but i don't think there should be a problem recovering other cards.
I don't think there's any difference from other SDs.
(I haven't tried this cause i dont have a 4GB card, i just wanted to bring this to your attention...)
Try it out and report the results..
http://www.transcendusa.com/Support/FAQ/index.asp?axn=Detail&LangNo=0&FAQNo=410
Good Luck!
hi
i just bought a new 2GB Transcend MicroSD Card
with mini sd adapter.
but the wizard doesnt read the card
(fat32 formated)
if i try the card in a cardreader its working ,
my old 512mb mini sd card working is working in my wizard..
any solution?
XTRANGE...
Try to use a ROM that contains the app format storage and try to formatt... but i think it may recognize it first... nothing to lose if try... or reformatt it on a XP built in with card reader.
Panasonic makes a free sd formatting software that it claims to strictly adhere to the sd standard:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
You could give it a shot, don't see how it could hurt
I have put the card I used to use in my Raphael in to my HD2 and yes it saw it for a few seconds then 'poof' as if by magic it was gone! After trying several times cleaning the contacts etc I gave up.
Then I realised it was FAT32 and the newer 2GB card that was shipped with the phone was FAT format. So I wiped the card and reformatted to the FAT. Now its just not seeing it at all. Hmmm
I bought the SanDisk 8GB card with HC so it would be faster to access.... is this messing it up?
ANY IDEAS ITS DRIVING ME MAD!!!!!!!!!!!!!!!
try to format it with the Control Panel> Administrative Tools> commputer Management> Disk Management
formatted sd card
Yeah thats how I did it originally, not its just freezing up everything that I put the card into.
DOH, HELP!
ne1 got ideas?
FAT support only storage up to 2GB, FAT32 2-32GB. So it has to be FAT32.
Try SD-hotfix for HD2 http://forum.xda-developers.com/showthread.php?t=602527
I recomend Panasonic SDformatter 2.0 to clear your card (FAT32)
I have tried several builds but the result is disappointing. None of them can boot when I want to use EXT4 partition for data on it with my large SDHC card (16GB)
My 8GB Class 6 microSDHC runs fine but when I want to use Class 10 16GB card, the system crashes on boot...
I think 15GB FAT32 partition (I created 1GB EXT4 partition at the end of the card) is too large to be seen during Android boot or what?
Do you think it will work when I create only 7GB FAT32 and 9GB EXT4 it will work? Or should I switch the order of partitions (EXT4 first?) (it is not good solution but good for test)
Can someone from cooks help here? Thank you very much.
Firstly, this is the wrong section. There is a Q&A section explicitly for questions like this.
Secondly, I have a 16GB card with exactly this setup (15+1) and it works perfectly. Your card is possibly defective. Grab this little program and test it.
I use a 16GB CLASS 6 SD CARD for a long time.
maybe is something wrong with ur 16GB
and never create a partition bigger than 1.5g for your EXT4
I still guess the problem is your 16gb card..
I am also using a 16GB class 6 micro SDHC with no issues so far.
My partitioning is 14+2 (FAT32+EXT4) and runs like a charm.
I agree with the others, there must be something wrong with your card.
Thank you. I will test it using the program...
THe card otherwise works correctly...no bad clusters, missing files....perhaps the Class 10 is only a advertisement and the card is too slow? (because I heard that if the card is too slow then the system may boot too long and also become unresponsive (force close or wait for main android process etc.)
SO to give a public anti-advert I will reveal that my microSDHC card is KINGSTON CLASS 10
I have the same card kingston 16Go C10 and no pb !
My advice, make your partition (after full format fat32) with CWR (swap 0)
Sent from my HTC HD2 using XDA App
matmar said:
I have the same card kingston 16Go C10 and no pb !
My advice, make your partition (after full format fat32) with CWR (swap 0)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I've been trying everything to get a NAND install using a (brand new) Kingston 16gb class but have had no luck. The same process works on my sandisk 2gb card. I posted the question earlier today for any advice.
I got same problems with my 16 gb class 10 card (adaTA).
The card is 100% error free and on winmo work superfast. Unfortunately when i try to make ext partition on this than is going to work so sloow and with errors.
I have also PQI 8gb class 6, sandisk 8gb class 2 and samsung 16gb class 2 and I have to say that ext partitioned roms work fastest on slowest sandisk!!!
What is going on?
SanDisk 32GB MicroSDHC. no problems with it.
i used gparted livedisc to format 1gb ext4 partition. works great
32 GB ok but what class?
Hey guys, I was hoping you guys could help me trouble shoot my SD card not reading. I tried my Scandisk 16 gig SD card and it wouldn't read. I tried restarting phone to see if it helped and it didn't. I tried a Samsung 32 gig SD card and it worked. Any suggestions for my 16 gig card? I'd use the 32 gig but I'm letting the wife use it for now. Maybe it needs formatting. Is there a way to do that? Thanks!
Try to format it in the phone. Or check file system on working sd card (Samsung) and format Sandisk using the same with your pc.