Related
hi...
as the title...
who all are succeded in connecting usb external hdd to iconia ?
cause i tried with two, and booth are not recognized
one is pendrive sense 320gb, second is wd 250gb
all you who can connect, whats your hdd??
fyi, i can connect card reader and usb thumb drive
UPDATE
OKEY..
so i tried connecting my hdd through a powered usb hub, and still no luck,
i tried connect it with a Y cable, one to iconia and onte to powered hub, also no luck ...
is there any other way to try ? tried every thing from usb mount all, ntfs mount, charging while plugging , usb powered, new HDD, fat32 formatted , ntfs HDD and all in vain...
if not then, i am sure my device is defective of something....
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
FloatingFatMan said:
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
Click to expand...
Click to collapse
the first one have fat32 and nts partition, but the second one have 250gb full of fat32
i have installed ntfs mount and usb mount all, they just are not detected at all..
I just got my tab today, rooted and installed ntfs mount. No problems getting into my 500gig external hdd, formatted in ntfs.
Sent from my A500 using Tapatalk
I tried both 320gb Seagate and 750gb passport worked fine...They both formatted in fat32.
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
l live in china ,very far from you .....
i still wait for the 3.1 update.
i am not sure can i receive ota update if i root it.
so i dont root ,and still wait.
well ,if i get the update of 3.1 ,i will come back and reply .
i have a 2T hdd, buffalo.
Okey... So now i have tried at least 6 different hdd and all failed...
I start to think ut is my hardware or rom problem?
Any solution ?
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
urbie47 said:
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
how long actually ??
becauuse if this problem persist, i think i will take my device to the service centre,
btw, do they will know that i am rooted ?
last update : i have connected my hdd to iconia for about an hour without any luck,.
come on, do some one here can make a solution for me please ??
i can connect flash drive and card reader but not hdd, tried 6 different of them
even i asked in local acer forum in my country, everyone dont have problem...
so, what you think my problem here?
do i must do factory reset ?
interqd said:
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
Click to expand...
Click to collapse
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
iCurmudgeon said:
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
Click to expand...
Click to collapse
how to connect it with external power supply ?
my hdd has only 1 usb slot, not 2 ..
Guy's....just download (HP USB Disk Storage Format Tool) to format your HD's to fat32. I did my 250 & 500GB HD and it work just find. Windows just don't format right...that's why I don't use windows to format my HD's. If you have Linux use Gparted.
I have
http://forum.xda-developers.com/showpost.php?p=14129262&postcount=8
I also have a 250gb that I can't get to read but then it needs dual-powered cable to be read on my laptop so I expected that. But my 320gb Buffalo, my 32gb Patriot and my 80gb Maxtor read just fine. All are NTFS. I have a 160gb from work that I will try tomorrow.
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Euclid's Brother said:
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
i am using mac, not windows, my hdd connect fine to mac, how to do this on mac?
not only different cables, yesterday i went to an it mall, there i tried almost 5 different 500gb hdd 2.5 inch, all failed, all have fat32 format, cause i checked them on my mac beforehand
yeah, of course i connect it to the usb 2.0 port..
this is what i dont understand, everyones hdd work fine in the iconia, why my iconia just cant read?
mine don't work either. I have a 1 TB western digital hard drive.
i use ntfs mount,first time install that ntfs mount apk...cant read my hdd but aftter reboot my iconia all partition on hdd can read and walk normal like on my laptop
I'm in Jakarta, so I don't think it can be a rom thing. Are you using NTFS mount, or just trying to plug the HDD into your tab and use the built-in software? Try this and it should fix the problem.
I was interested in transfering files from my hone (Nexus s 4g) and my A500. I wanted to know if this is possible by simply plugging the phone into the tablet's usb port. If not, is there any drivers or apps i can download to let me do so? Basically, i want it to be like when i plug it into my computer. I want it to show up like a hard drive.
Also, i have a external harddrive and had a question on how to format it. When i right click hit format is comes up as NTFS being the default file system. The onl y other option is exFat. Is that the same as Fat32? I've heard Fat32 is the only file system that works.
Thanks for the help!
Spid3rman said:
I was interested in transfering files from my hone (Nexus s 4g) and my A500. I wanted to know if this is possible by simply plugging the phone into the tablet's usb port. If not, is there any drivers or apps i can download to let me do so? Basically, i want it to be like when i plug it into my computer. I want it to show up like a hard drive.
Also, i have a external harddrive and had a question on how to format it. When i right click hit format is comes up as NTFS being the default file system. The onl y other option is exFat. Is that the same as Fat32? I've heard Fat32 is the only file system that works.
Thanks for the help!
Click to expand...
Click to collapse
Use gparted partition manager on puppy linux to format it into fat32.....
Sent from my XT720 using XDA App
Still not working
Ive converted the drive to fat32 but i still cant get it to be recognized by my a500, can someone please explain how i could do so?
Spid3rman said:
Ive converted the drive to fat32 but i still cant get it to be recognized by my a500, can someone please explain how i could do so?
Click to expand...
Click to collapse
Try using a powered usb hub....or try using 'drive mount'.....search it in the market...
Sent from my XT720 using XDA App
i use nokia e71.
using the datacable ,connect the e71 to a500.
just like an u flash,i can see it in astro .
I CAN DO THIS AFTER UPDATE to 3.1 , and the mount with drive mount
I use this USB host cable and it works great. Have tested it with my 750gb Oyen and 320gb WD Passport external HDD's, several usb flash drives (8-16gb), San disk USB memory card reader, and a USB keyboard.
For those having issues getting their Xoom to recognize USB storage devices here's what I've got and did to get it to work: I flashed my XOOM (3.1) to the 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle Kernel and was unable to get the USBMount to recognize drives or storage at first. I installed USB Mass Storage Watcher from the market (it's free) and it works awesome! Can mount any storage I want (NTFS, FAT16/32, HFS, HFS+, EXT2, ETX3, EXT4) with any capacity. I think this app will work with any rooted Xoom (or other devices). Under my Kernel my USB host is located under/usbOTG.
Hope this helps.
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
hunix said:
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
Click to expand...
Click to collapse
Sounds like your cable is not OTG. A lot of them are not. Try it again with your Moto cable when it comes. Also, try rebooting with the cable and drive plugged in, with OTG Watcher running. That has worked for me in the past.
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
sdsi said:
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
Click to expand...
Click to collapse
You do need root to mount the drive-to use Xoom in USB Host Mode.
Only root? Is that all that needs to be done?
spinstartshere said:
Only root? Is that all that needs to be done?
Click to expand...
Click to collapse
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
okantomi said:
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
Click to expand...
Click to collapse
it works great on rooted stock kernel 3.2 with "Drive Mount" but from the market you can not install "Drive Mount" it says not supported.
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
3devious said:
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
busybox also needed
it is free and here is it
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
uhs74 said:
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
Click to expand...
Click to collapse
Just tried with a genuine motorola OTG cable, which works with the same stick because I used it for upgrading my UK one to US ICS 4.0.3, and it doesn't work without rooting. I still can't root mine yet because my micro SD card for backup hasn't come!
hello
i have wifi xoom android 4.0 rooted with timat kernal
the usb host mount fine but i coudln't found the files in the file explorer
when i mount hard drive fat 32
also when i mounted the ntfs hard drive it shows me 0mb in the usb mount app !
what is the problem
read usb drive from rooted xoom
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
uhs74 said:
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
Click to expand...
Click to collapse
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
Oh i got it wrong link but i used OTG adapter.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
How's that digger from a USB ORG adapter? Just curious.
Sent from my ADR6350 using Tapatalk
Everything works only if its Fat32. NTFS needs new kernal loaded. I am Rooted but Stock. 4.0.4.
Reboot loop after trying to get external USB to work
My Xoom WiFi running Team EOS build 102 would not see my USB drives. I installed 'USB Mass Storage Watcher' from the market. This app then prompted me to install the OTG version. I followed instruction and removed original version before install the OTG version. The OTG version also prompted me to down load another version of Busy Box, which I did.
I could then see one of my USB (see size and space used), but could not see files or folders in the mount location. I restarted my Xoom (I live in a windows world and reboot fixes a lot of issues LOL), Xoom got stuck in reboot loop. I went into recovery mode and clear my Dalvik, but this had no effect on reboot loop.
Luck for me I had a Nandroid backup from 2 days earlier (pheew). Restored this and back to normal.
Not sure if anyone has had this problem, but I strongly recommended making nandroid backup before doing any device driver updates.
No Prob...
im on the same software version as u, i connected usb drives, mouse and keyboard without any problems, just wanted to let u kno
hi
i have acer a500 and i have 4.0.3 stock without root and i try to connect my hdd wd NTFS and i see nothing on root explorer or es file explorer or..oi file manager..
what i'm wrong with?
thanks
I7210I said:
hi
i have acer a500 and i have 4.0.3 stock without root and i try to connect my hdd wd NTFS and i see nothing on root explorer or es file explorer or..oi file manager..
what i'm wrong with?
thanks
Click to expand...
Click to collapse
It could be a number of things.
First of all, what is the hd you are connecting?
Is it a portable?
Some work and some don't.
A portable HD that does work will draw power from the A500.
When you plug it in you will hear it spin up and the light will flash on it, indication it is being read.
If the light comes on and then immediately goes off then the drive wont work because it probably requires more power.
Also in your file manage it will come up as usb.
And if it does work you nedd to let the A500 read it before opening your file manager.
It will be ready to see in the file manager when the light stops blinking.
Some have found the following to work on some tablets.
Freecom Mobile Drive Classic II 500gb
Seagate GoFlex 1TB
500 gb Freeagent Go
Samsung S2 Portable 640 GB
LaCie's 500GB Rikiki
WD 500G Passport Elite
WD myBook 500GB
WD Elements Portable SE 500GB
Seagate FreeAgent Go Flex 1TB
Seagate FreeAgent GoFlex 500 GB
freeagent go 250gb
maxtor basics portable storage 500GB
Transcend 320gb Storejet external HDD
Iomega 500GB Select Portable
Toshiba Canvio USB 2.0 500 GB
To keep a master list I added from other posts below:
Toshiba Canvio USB 2.0 1TB
Add Transcend 320gb to the list. (NTFS SATA)
Also WD Elements 1Tb (ext power required)
Also add Samsung s2 1Tb and Hitachi Touro 1Tb too, both NTFS sata...
i connect wd essential se 750GB
http://wdc.com/en/products/products.aspx?id=430
it sounds that it works also it shows the light but i can;t see anything
now i'm with 4.0.3 but before i was with 3.2.1 and it works well
so i think the problem maybe with the 4.0.3
someone can help please?
I7210I said:
someone can help please?
Click to expand...
Click to collapse
I will hook my hdd later and see if it works and where it shows up, and get back with you.
mine worked fine, and shows up under mnt/usb_storage
I7210I said:
someone can help please?
Click to expand...
Click to collapse
I can advise, that sometimes, on HC, I would have to plug and unplug the USB connector several times before it would work. You might try that.
Also, I use File MAnager HD, and just select External Storage.
Add 2tb wd
still no success with it...what else i can do?it can be problem with version?
I7210I said:
still no success with it...what else i can do?it can be problem with version?
Click to expand...
Click to collapse
No answer for you mate. Try getting DriveMount from the market, and see if that gets it going. Really shouldn't need it, but in the past, some tablets had to use it for NTFS.
I7210I said:
still no success with it...what else i can do?it can be problem with version?
Click to expand...
Click to collapse
At this point try another drive.
i tried another hdd and it works ..the other one is also NTFS -WD Elements
I7210I said:
i tried another hdd and it works ..the other one is also NTFS -WD Elements
Click to expand...
Click to collapse
Glad you got it working, if possible I would reformat the one that did not work and give it a try again.
Anyone having a Seagate goflex free agent 1TB can access it through USB on a500?
EDIT: Ok, can access it. Had some problems with the cable earlier..
NTFS is related to Microsoft licensing and Android doesnt have the neccessary license to work , most fat 32 drive will work with no problems , if you have root there are ways around the licensing issues , you might try something like this :
NTFSMount.apk
To use the NTFSMount app,you need root you should follow the instructions below;
- Install APK
- Connect HDD
- Launch app
- Select device
- Click Mount
http://*******/282572/get-ntfsmount-apk
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
can you upload again the
NTFSMount
?
and maybe it will help for you that what i did for the version
http://forum.xda-developers.com/showthread.php?t=1646042
someone can help me please??
if ther's need to re format the tab again i will do it i need that option for the hdd
Hi everyone, my a500 is still in 3.0.1 with build # Acer_A500_1.139.04_COM_GEN1.
When I plug-in a flash drive/external HDD in the USB slot it wont detect it. been using a few file manager/browser already all of them didn't detect what I mounted.
anyone?
bordikun said:
Hi everyone, my a500 is still in 3.0.1 with build # Acer_A500_1.139.04_COM_GEN1.
When I plug-in a flash drive/external HDD in the USB slot it wont detect it. been using a few file manager/browser already all of them didn't detect what I mounted.
anyone?
Click to expand...
Click to collapse
You need to update your System to at least 3.2. That should fix your issues.
In the meantime, you could try getting the app "DriveMount" from the market and see if that helps you.
But upgrading your OS is the better method.
MD
Mine was already 3.2 and yet it can't detect any USB that I insert. I also reformat my USB to fat32. Can anyone help me
TIA