Every so often my phone just refuses to wake up. I press menu and the keys light up but screen never does. I press call+menu+end to reboot and screen still doesn't wake up. Second time I try call+menu+end screen finally wakes up and device reboots. I'm running CyanogenMod 3.6.8.1 and have a custom bootscreen. Does this seem like a hardware problem or software? Any help is much appreciated, thanks.
After flashing a new ROM, the problem seemed to go away but came back. Everything seems to power on except the lcd. I can tap and hold to move an icon but nothing shows on the screen. Is there a certain app that would cause this or is it hardware? I've disabled compcache and swap and it made no difference. Any advice appreciated
I uncovered a little more info using dmesg over adb. Heres what it said
Code:
<3>[ 569.121337] Freezing of user space aborted
<4>[ 569.126312]
<4>[ 569.128173] Restarting tasks ... done.
<6>[ 569.144226] suspend: exit suspend, ret = -11 (2009-07-26 16:02:19.600952156 UTC)
<6>[ 569.536926] PM: Syncing filesystems ... done.
<4>[ 569.544097] Freezing user space processes ... (elapsed 0.00 seconds) done.
<4>[ 569.556793] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
<4>[ 569.570587] trout_sdslot_switchvdd: Disabling SD slot power
<4>[ 569.576934] trout_sdslot_switchvdd: Setting level to 2950
<6>[ 569.588989] wakeup wake lock: SMD_RPCCALL
<4>[ 569.595153] Restarting tasks ... done.
<6>[ 570.164764] suspend: exit suspend, ret = 0 (2009-07-26 16:06:04.070281996 UTC)
<6>[ 570.679016] PM: Syncing filesystems ... done.
<4>[ 570.686401] Freezing user space processes ... (elapsed 0.00 seconds) done.
<4>[ 570.702178] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
<4>[ 570.717041] trout_sdslot_switchvdd: Disabling SD slot power
<6>[ 570.717041] wakeup wake lock: gpio_kp
<4>[ 570.722290] trout_sdslot_switchvdd: Setting level to 2950
<4>[ 570.737670] Restarting tasks ... <6>request_suspend_state: wakeup (3->0) at 566131612099 (2009-07-26 16:06:43.522277832 UTC)
<4>[ 570.768218] done.
<7>[ 571.308227] mmc_queue_thread: status 0x00000900
<6>[ 571.313720] suspend: exit suspend, ret = 0 (2009-07-26 16:06:44.077117942 UTC)
<6>[ 571.537597] mddi_remote_read(150000) timeout (-1 -973073920 0)
<6>[ 571.544189] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 571.657470] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 571.662902] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 571.767456] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 571.773010] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<4>[ 571.783599] unknown panel id at mddi_enable
<6>[ 571.788238] msmfb: panel resume failed, not resuming fb
<6>[ 576.621246] hsusb: OFFLINE -> ONLINE
<6>[ 576.625518] hsusb: reset controller
<4>[ 576.687469] ulpi: write 0x40 to 0x31
<4>[ 576.691497] ulpi: write 0x1d to 0x0d
<4>[ 576.695434] ulpi: write 0x1d to 0x10
<6>[ 576.699768] ept #0 out max:64 head:ffa0c000 bit:0
<6>[ 576.704833] ept #1 out max:512 head:ffa0c080 bit:1
<6>[ 576.710327] ept #2 out max:512 head:ffa0c100 bit:2
<6>[ 576.715515] ept #0 in max:64 head:ffa0c040 bit:16
<6>[ 576.720642] ept #1 in max:512 head:ffa0c0c0 bit:17
<6>[ 576.726074] ept #2 in max:512 head:ffa0c140 bit:18
<6>[ 576.731597] usb: notify offline
<6>[ 576.753906] usb: suspend
<6>[ 576.936981] usb: reset
<6>[ 576.939270] usb: portchange USB_SPEED_HIGH
<6>[ 577.097961] usb: reset
<6>[ 577.100555] usb: portchange USB_SPEED_HIGH
<6>[ 577.333526] usb_mass_storage usb_mass_storage: config #1
<6>[ 578.735534] audmgr_rpc_thread() start
<6>[ 578.736206] audio_enable()
<6>[ 578.736236] ++++++++++++++++++++++++++++++
<6>[ 578.745056] audmgr: rpc_reply status 0
<6>[ 578.758941] audmgr: rpc READY handle=0x00000000
<6>[ 578.837646] audmgr: rpc CODEC_CONFIG volume=0x00002000
<6>[ 578.837738] audpp: enable
<6>[ 578.837768] adsp: opening module AUDPPTASK
<6>[ 578.850708] adsp: module AUDPPTASK has been registered
<6>[ 578.850738] msm_adsp_enable() 'AUDPPTASK'state[0] id[4]
<6>[ 578.861938] adsp: rpc event=0, proc_id=2, module=4, image=0
<6>[ 578.861999] adsp: module AUDPPTASK: READY
<6>[ 578.862304] audpp: ENABLE
<6>[ 578.862365] audio_dsp_event: CFG_MSG ENABLE
<3>[ 579.530090] audpp: DMA missed obj=20
<6>[ 582.459472] audio_disable()
<6>[ 582.462738] audio_dsp_event: CFG_MSG DISABLE
<6>[ 582.467712] audpp: disable
<6>[ 582.470825] msm_adsp_disable() 'AUDPPTASK'
<6>[ 582.475250] audpp: DISABLE
<6>[ 582.479705] adsp: closing module AUDPPTASK
<6>[ 582.484252] adsp: disable interrupt
<6>[ 582.490600] audmgr: rpc_reply status 0
<3>[ 582.520477] audmgr: DISABLED
<6>[ 582.523986] ------------------------------
[B]<6>[ 637.073669] request_suspend_state: sleep (0->3) at 632446370407 (2009-07-26 16:07:49.837036140 UTC)
<6>[ 637.187530] mddi_remote_read(150000) timeout (-1 99 0)
<6>[ 637.193176] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 637.317962] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 637.323577] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 637.457519] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 637.463104] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<4>[ 637.478057] unknown panel_id: 3
<4>[ 637.788482] save exit: isCheckpointed 1
<6>[ 939.424530] request_suspend_state: wakeup (3->0) at 934797200486 (2009-07-26 16:12:52.187896737 UTC)
<6>[ 939.647521] mddi_remote_read(150000) timeout (-1 -973073920 0)
<6>[ 939.653656] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 939.757568] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 939.763153] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 939.867553] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 939.872985] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<4>[ 939.883544] unknown panel id at mddi_enable
<6>[ 939.887969] msmfb: panel resume failed, not resuming fb
<4>[ 939.929138] msm_i2c msm_i2c.0: Warning bus was busy (5)
<6>[ 949.676208] request_suspend_state: sleep (0->3) at 945048909481 (2009-07-26 16:13:02.439605732 UTC)
<6>[ 949.797393] mddi_remote_read(150000) timeout (-1 98 0)
<6>[ 949.803283] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 949.907409] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 949.913024] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<6>[ 950.037567] mddi_remote_read(150000) timeout (-1 -1 0)
<6>[ 950.037628] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val d curr_rev_ptr 0
<4>[ 950.038269] unknown panel_id: 3
<4>[ 950.745727] save exit: isCheckpointed 1[/B]
Is the code in bold at the end my problem? Is my hardware broken or could this be just a software bug?
I also tried an older CM build and same thing is happening. Is this officially hardware? Would I be able to get it replaced by HTC considering I got it unlocked on eBay?
umm u might wanna wipe...n if that doesnt work..(drastic measures) run dreaming.nbh in the spl bootloader and reroot
I've wiped and flashed a different ROM twice, no luck. How do I run dreaming.nbh? From the shell in recovery?
Hey, so I am having issues getting my nexus 7 to connect to:
1) A WiFi hit spot sold by sprint
2) WiFi tether for root users on my epic 4g touch
Every time I try to connect, it just sits there saying Saved, when it attempts to connect, it does the following.
<6>[ 1731.085143] gpio_keys: Pressed KEY_VOLUMEUP
<6>[ 1732.075103] gpio_keys: Released KEY_VOLUMEUP
<4>[ 1742.238678] connect failed event=0 e->status 1 e->reason 0
<3>[ 1742.239261] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<6>[ 1742.905188] gpio_keys: Pressed KEY_VOLUMEUP
<4>[ 1743.796567] cpu_up(1)+
<7>[ 1743.819992] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1743.820228] CPU1: Booted secondary processor
<4>[ 1743.820922] cpu_up(1)-
<6>[ 1743.825092] Switched to NOHz mode on CPU #1
<6>[ 1745.355185] gpio_keys: Released KEY_VOLUMEUP
<4>[ 1747.495190] cpu_down(1)+
<4>[ 1747.497796] stop_machine_cpu_stop smp=0
<4>[ 1747.497819] stop_machine_cpu_stop smp=1
<5>[ 1747.501350] CPU1: shutdown
<4>[ 1747.505652] cpu_down(1)-
<4>[ 1754.209707] connect failed event=0 e->status 1 e->reason 0
<3>[ 1754.210075] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 1766.179474] connect failed event=0 e->status 1 e->reason 0
<3>[ 1766.179604] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 1768.175110] cpu_up(1)+
<7>[ 1768.197452] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1768.197685] CPU1: Booted secondary processor
<4>[ 1768.198278] cpu_up(1)-
<6>[ 1768.205065] Switched to NOHz mode on CPU #1
<4>[ 1770.675130] cpu_down(1)+
<4>[ 1770.676925] stop_machine_cpu_stop smp=0
<4>[ 1770.676948] stop_machine_cpu_stop smp=1
<5>[ 1770.679400] CPU1: shutdown
<4>[ 1770.682323] cpu_down(1)-
<4>[ 1772.935077] cpu_up(1)+
<4>[ 1772.956078] CPU1: Booted secondary processor
<4>[ 1772.956804] cpu_up(1)-
<6>[ 1772.965070] Switched to NOHz mode on CPU #1
<5>[ 1773.297550] bq27541_get_psp status: Discharging ret= 0x0101
<5>[ 1773.298205] bq27541_get_psp voltage_now= 3737000 uV
<5>[ 1773.298844] bq27541_get_capacity = 31% ret= 35
<5>[ 1773.299535] bq27541_get_psp temperature= 290 (0.1¢XC)
<5>[ 1773.301018] bq27541_get_capacity = 31% ret= 35
<5>[ 1773.301791] bq27541_get_psp voltage_now= 3737000 uV
<5>[ 1773.302505] bq27541_get_psp temperature= 290 (0.1¢XC)
<5>[ 1773.303274] bq27541_get_psp status: Discharging ret= 0x0101
<4>[ 1775.236203] cpu_down(1)+
<4>[ 1775.238012] stop_machine_cpu_stop smp=0
<4>[ 1775.238033] stop_machine_cpu_stop smp=1
<5>[ 1775.240341] CPU1: shutdown
<4>[ 1775.243291] cpu_down(1)-
<4>[ 1779.005135] cpu_up(1)+
<7>[ 1779.044705] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1779.044947] CPU1: Booted secondary processor
<6>[ 1779.045076] Switched to NOHz mode on CPU #1
<4>[ 1779.055396] cpu_up(1)-
<4>[ 1779.105085] cpu_up(2)+
<4>[ 1779.105756] CPU2: Booted secondary processor
<4>[ 1779.106395] cpu_up(2)-
<6>[ 1779.115065] Switched to NOHz mode on CPU #2
<4>[ 1779.156698] connect failed event=0 e->status 1 e->reason 0
<3>[ 1779.156862] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 1781.205190] cpu_down(1)+
<4>[ 1781.208001] stop_machine_cpu_stop smp=0
<4>[ 1781.208026] stop_machine_cpu_stop smp=1
<4>[ 1781.208047] stop_machine_cpu_stop smp=2
<5>[ 1781.211678] CPU1: shutdown
<4>[ 1781.215786] cpu_down(1)-
<4>[ 1783.205273] cpu_down(2)+
<4>[ 1783.207760] stop_machine_cpu_stop smp=0
<4>[ 1783.207785] stop_machine_cpu_stop smp=2
<5>[ 1783.211411] CPU2: shutdown
<4>[ 1783.214996] cpu_down(2)-
<4>[ 1790.855129] cpu_up(1)+
<7>[ 1790.885773] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1790.886013] CPU1: Booted secondary processor
<6>[ 1790.895086] Switched to NOHz mode on CPU #1
<4>[ 1790.896718] cpu_up(1)-
<4>[ 1791.131409] connect failed event=0 e->status 1 e->reason 0
<3>[ 1791.131768] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 1793.055193] cpu_down(1)+
<4>[ 1793.057518] stop_machine_cpu_stop smp=0
<4>[ 1793.057541] stop_machine_cpu_stop smp=1
<5>[ 1793.061289] CPU1: shutdown
<4>[ 1793.065042] cpu_down(1)-
<4>[ 1795.855139] cpu_up(1)+
<7>[ 1795.885792] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1795.886027] CPU1: Booted secondary processor
<6>[ 1795.895092] Switched to NOHz mode on CPU #1
<4>[ 1795.896734] cpu_up(1)-
<4>[ 1798.255168] cpu_down(1)+
<4>[ 1798.267013] stop_machine_cpu_stop smp=0
<4>[ 1798.267033] stop_machine_cpu_stop smp=1
<5>[ 1798.269651] CPU1: shutdown
<4>[ 1798.272700] cpu_down(1)-
<4>[ 1800.255080] cpu_up(1)+
<4>[ 1800.256713] connect failed event=0 e->status 1 e->reason 0
<3>[ 1800.256787] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 1800.276129] CPU1: Booted secondary processor
<4>[ 1800.276841] cpu_up(1)-
<6>[ 1800.285069] Switched to NOHz mode on CPU #1
<4>[ 1802.355169] cpu_down(1)+
<4>[ 1802.357613] stop_machine_cpu_stop smp=0
<4>[ 1802.357636] stop_machine_cpu_stop smp=1
<5>[ 1802.361199] CPU1: shutdown
<4>[ 1802.364700] cpu_down(1)-
<4>[ 1807.235110] cpu_up(1)+
<4>[ 1807.256269] CPU1: Booted secondary processor
<4>[ 1807.257405] cpu_up(1)-
<6>[ 1807.265082] Switched to NOHz mode on CPU #1
<4>[ 1809.335168] cpu_down(1)+
<4>[ 1809.337691] stop_machine_cpu_stop smp=0
<4>[ 1809.337716] stop_machine_cpu_stop smp=1
<5>[ 1809.341149] CPU1: shutdown
<4>[ 1809.346352] cpu_down(1)-
<4>[ 1812.195150] cpu_up(1)+
<4>[ 1812.216592] connect failed event=0 e->status 1 e->reason 0
<3>[ 1812.216675] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<7>[ 1812.235578] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1812.235817] CPU1: Booted secondary processor
<4>[ 1812.241341] cpu_up(1)-
<6>[ 1812.245097] Switched to NOHz mode on CPU #1
<4>[ 1814.395180] cpu_down(1)+
<4>[ 1814.398667] stop_machine_cpu_stop smp=0
<4>[ 1814.398690] stop_machine_cpu_stop smp=1
<5>[ 1814.400749] CPU1: shutdown
<4>[ 1814.404283] cpu_down(1)-
<4>[ 1816.142361] wl_bss_connect_done succeeded with 00:22:75:99:39:f9
<6>[ 1816.145835] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 1816.300417] wl_bss_connect_done succeeded with 00:22:75:99:39:f9
<4>[ 1816.595097] cpu_up(1)+
<7>[ 1816.636158] tegra CPU: force EDP limit 1200000 kHz
<4>[ 1816.636391] CPU1: Booted secondary processor
<6>[ 1816.645084] Switched to NOHz mode on CPU #1
<4>[ 1816.647752] cpu_up(1)-
Click to expand...
Click to collapse
The last bit when it connects is me connecting to a random billing router. I tried resetting all the devices, forgetting the pass code on the nexus and retyping it again.
So far nothing has worked. Has anyone has a similar issue.
does your home wifi work? what channel/frequency are your modems? r u running an custom rom with custom kernel? more info would be helpful
Access point at home works fine. The nexus is currently stock minus being rooted. I believe the APs were on channel 1 or 2. It seems to have connected fine to the hotspot that sprint gives out. When I tried to connect to WiFi tether on my epic touch 4g , the same problem happened, and then I was unable to connect to the hotspot device from sprint.
Dear all,
I know this is not the correct thread but I don't have enough privileges to post in development.
EDIT: crap, just saw there is a Q&A section, messed up the location of my first post it seems.
The Project
Roaming is bad on most android devices for VOIP. This is due to the fact that you can't change the default parameters efficiently.
I wrote a fix for the broadcom drivers (BCMDHD4354 and BCMDHD) by means of using the iotcl's and a custom tool I wrote to change the default parameters (delta, trigger, interval)
The problem
When I compiled the stock kernel G900FXXU1ANG2 found on the opensource page of samsung I had no error's whatsoever.
The device booted fine and everything seemed to work. I was able to adjust the roaming parameters successfully.
However ...
After turning the wifi on and off by means of reboot or just turning it off or whatever, the connection profile is lost.
The entry found before in wpa supplicant is gone and is replaced by this:
Code:
cat /data/misc/wifi/wpa_supplicant.conf
ctrl_interface=/data/misc/wifi/sockets
update_config=1
device_name=kltexx
manufacturer=samsung
model_name=SM-G900F
model_number=SM-G900F
serial_number=8e98743f
device_type=10-0050F204-5
config_methods=physical_display virtual_push_button
p2p_disabled=1
okc=1
ss_enc=1
autoscan=samsung_exponential:8:128
cred={
imsi="?"
}
It also takes a very long time to actually turn on the wifi. The stockrom takes around one second while my kernel version takes 8-10 seconds.
The steps I allready took
kernel without any customization
I downloaded the source again (just to be sure) and compiled it without any changes. Using the build_msm8974pro_kernel.sh script found with the kernel (with some small adaptions regarding folder locations and toolchains).
It compiled fine and was able to successfully flash the zImage on the phone: Still the same issue, so its not because of my small change to the BCMDHD4354 driver.
in short the script can be reduced to this:
Code:
make -C ../kernel O=../okernel -j4 ARCH=arm \
CROSS_COMPILE=/opt/toolchains/gcc-arm-none-eabi-4_7-2014q2/bin/arm-none-eabi- \
msm8974_sec_defconfig VARIANT_DEFCONFIG=msm8974pro_sec_klte_eur_defconfig \
DEBUG_DEFCONFIG=msm8974_sec_eng_defconfig SELINUX_DEFCONFIG=selinux_defconfig \
SELINUX_LOG_DEFCONFIG=selinux_log_defconfig || exit -1
Toolchains
Samsung suggests to build the kernel using the arm-eabi-4.6 toolchain. However, the sockrom uses the gcc 4.7 library, so I tried both. (got some errors with the 4.6 not finding certain headers etc... which I fixed by mannually adding them).
However, I got the same problem using both toolchains. So I don't think it's a toolchain problem.
DMESG log
I disabled the wifi and started a clean dmesg log the moment I turned wifi back on to compare the differences with the stock and the compiled stock.
(I got a lot more debugging messages, but that is probly because it is configured that way in my defconfig file).
Besides taking 10 seconds longer before showing up in the dmesg there does not seem to be anything off.
Custom:
Code:
[email protected]:/ # dmesg
dmesg
<6>[ 93.693003] secure_storage_ (5477): undefined instruction: pc=b6dd7548
<6>[ 93.693018] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 93.704726] QSEECOM: qseecom_load_app: App (sec_stor) does'nt exist, loading apps for first time
<4>[ 93.717920] QSEECOM: qseecom_load_app: App with id 2 (sec_stor) now loaded
<4>[ 93.760176] QSEECOM: qseecom_unload_app: App id 2 now unloaded
<6>[ 96.410056] CFG80211-INFO2) wl_scan_timeout : timer expired but no scan request
<6>[ 96.561489] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[ 96.563822] max77804k_get_input_current: CHG_CNFG_09(0x12)
<7>[ 96.593202] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[ 96.593260] sec-battery battery.97: sec_bat_get_battery_info:Vnow(4387mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(294)
<6>[ 96.618093] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[ 96.621311] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[ 96.621362] sec-battery battery.97: sec_bat_time_management: Charging Time : 91 secs
<6>[ 96.621416] sec-battery battery.97: sec_bat_temperature: HLT(800) HLR(750) HT(600), HR(460), LT(-50), LR(0)
<6>[ 96.621472] sec-battery battery.97: sec_bat_fullcharged_check: Charging Mode : Additional
<6>[ 96.621522] sec-battery battery.97: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(4), Vendor(SDI SDI), siop_level(70)
<6>[ 96.621575] sec-battery battery.97: sec_bat_monitor_work: stability_test(0), eng_not_full_status(0) slate_mode(0)
<6>[ 96.630069] healthd: battery l=100 v=4387 t=29.4 h=2 st=5 c=0 o=4 ca=450 ct=1 ps=0 chg=u
<6>[ 97.360330] Debug Temp for Sensor:
<6>[ 97.360435] (0 --- 43)(1 --- 42)(2 --- 41)(3 --- 42)(4 --- 42)(5 --- 43)(6 --- 42)(7 --- 42)(8 --- 42)(9 --- 42)(10 --- 41)
<6>[ 98.267735] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 757, y = 168, wx = 5, wy = 5 |[1]
<6>[ 98.320636] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[4], Ver[A355][0/14]
<6>[ 98.368072] secure_storage_ (5485): undefined instruction: pc=b6dab548
<6>[ 98.368087] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 98.377907] QSEECOM: qseecom_load_app: App (sec_stor) does'nt exist, loading apps for first time
<6>[ 98.387574] wpa_supplicant (5487): undefined instruction: pc=b6e1b548
<6>[ 98.387584] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 98.399498] QSEECOM: qseecom_load_app: App with id 2 (sec_stor) now loaded
<4>[ 98.426938] QSEECOM: qseecom_unload_app: App id 2 now unloaded
<6>[ 101.090347] [SSP]: debug_work_func(0) - Sensor state: 0x3feff, RC: 0, CC: 0 DC: 0 TC: 0
<6>[ 101.090393] vfsspi_work_func_debug ocp state: 0, ocp en: 0 ldo pin: 0, sleep pin: 0, tz_mode: 1
<6>[ 101.091348] dmesg (5507): undefined instruction: pc=b6e43548
<6>[ 101.091361] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<3>[ 101.652891] reading MSM_THERM_CH [rc = 0] [adc_code = 31567]
<6>[ 102.370160] Debug Temp for Sensor:
<6>[ 102.370264] (0 --- 41)(1 --- 40)(2 --- 40)(3 --- 41)(4 --- 41)(5 --- 41)(6 --- 41)(7 --- 40)(8 --- 41)(9 --- 41)(10 --- 40)
<6>[ 102.499529] dmesg (5510): undefined instruction: pc=b6dd1548
<6>[ 102.499568] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 103.578665] [email protected] 3
<6>[ 103.729261] secure_storage_ (5513): undefined instruction: pc=b6db3548
<6>[ 103.729279] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 103.740552] QSEECOM: qseecom_load_app: App (sec_stor) does'nt exist, loading apps for first time
<4>[ 103.756539] QSEECOM: qseecom_load_app: App with id 2 (sec_stor) now loaded
<4>[ 103.801920] QSEECOM: qseecom_unload_app: App id 2 now unloaded
<6>[ 105.180716] dmesg (5514): undefined instruction: pc=b6e65548
<6>[ 105.180755] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 106.119765] dmesg (5516): undefined instruction: pc=b6e82548
<6>[ 106.119819] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 106.665073] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[ 106.666137] max77804k_get_input_current: CHG_CNFG_09(0x12)
<7>[ 106.694353] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[ 106.694397] sec-battery battery.97: sec_bat_get_battery_info:Vnow(4387mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(294)
<6>[ 106.718716] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[ 106.721475] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[ 106.721518] sec-battery battery.97: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(4), Vendor(SDI SDI), siop_level(70)
<6>[ 106.721559] sec-battery battery.97: sec_bat_monitor_work: stability_test(0), eng_not_full_status(0) slate_mode(0)
<6>[ 106.729328] healthd: battery l=100 v=4387 t=29.4 h=2 st=5 c=0 o=4 ca=450 ct=1 ps=0 chg=u
<6>[ 106.970738] dmesg (5518): undefined instruction: pc=b6dff548
<6>[ 106.970754] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 107.380213] Debug Temp for Sensor:
<6>[ 107.380316] (0 --- 41)(1 --- 40)(2 --- 39)(3 --- 40)(4 --- 40)(5 --- 40)(6 --- 40)(7 --- 40)(8 --- 40)(9 --- 40)(10 --- 39)
<6>[ 108.165214] dmesg (5520): undefined instruction: pc=b6eb2548
<6>[ 108.165231] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 108.456315]
<4>[ 108.456327] Dongle Host Driver, version 1.141.64 (r)
<4>[ 108.456343] Compiled in drivers/net/wireless/bcmdhd4354 on Mar 23 2015 at 09:41:26
<4>[ 108.456386] wl_android_wifi_on in
<4>[ 108.456424] wifi_platform_set_power = 1
<6>[ 108.456452] ------------------------------------------------
<6>[ 108.456481] ------------------------------------------------
<6>[ 108.456514] brcm_wlan_power Enter: power on
<6>[ 108.457764] WL_REG_ON on-step : [0]
<6>[ 108.457800] pcal6416a_gpio_direction_output(off=[8], val=[1])
<6>[ 108.462554] WL_REG_ON on-step-2 : [1]
<4>[ 108.700163] sdio_reset_comm():
<4>[ 108.751959] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 108.756041] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 108.758269] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>[ 108.848597] secure_storage_ (5523): undefined instruction: pc=b6da1548
<6>[ 108.848614] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 108.861303] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x0
<4>[ 108.862623] QSEECOM: qseecom_load_app: App (sec_stor) does'nt exist, loading apps for first time
<4>[ 108.863191] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 108.863717] dhdsdio_download_firmware: firmware path=/system/etc/wifi/bcmdhd_sta.bin, nvram path=/system/etc/wifi/nvram_net.txt_semco3rd
<4>[ 108.876014] QSEECOM: qseecom_load_app: App with id 2 (sec_stor) now loaded
<4>[ 108.915372] QSEECOM: qseecom_unload_app: App id 2 now unloaded
<4>[ 108.963772] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 109.011066] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<4>[ 109.013853] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 109.013862] [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
<4>[ 109.016449] Firmware up: op_mode=0x0005, MAC=84:33:32
<4>[ 109.022932] dhdcdc_set_ioctl: SET PM to 2
<4>[ 109.023288] [WIFI_SEC] sec_control_pm: /data/.psm.info open failed, so set PM to 2
<4>[ 109.024880] [WIFI_SEC] dhd_sel_ant_from_file: File [/data/.ant.info] open error
<4>[ 109.027944] dhd_wl_ioctl: WLC_SET_VAR: pspretend_threshold, ret = -23
<4>[ 109.027953] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
<4>[ 109.034028] Firmware version = wl0: Jun 11 2014 21:58:43 version 7.26.5.2 (A1 Station/P2P) FWID 01-8e4c322
<4>[ 109.034838] [WIFI_SEC] sec_save_wlinfo: .wifiver.info File open failed.
<4>[ 109.035965] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
<4>[ 109.036391] dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -14
<4>[ 109.037788] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 109.037800] [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 84:33:32
<4>[ 109.037921] [WIFI_SEC] Check Mac address in .mac.info
<6>[ 109.039168] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=86:33:32
<6>[ 109.141663] dmesg (5526): undefined instruction: pc=b6dfc548
<6>[ 109.141678] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 110.891535] dmesg (5528): undefined instruction: pc=b6e63548
<6>[ 110.891574] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<3>[ 111.708851] reading MSM_THERM_CH [rc = 0] [adc_code = 31807]
<6>[ 111.753992] dmesg (5530): undefined instruction: pc=b6e2a548
<6>[ 111.754031] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 112.090633] [SSP]: debug_work_func(0) - Sensor state: 0x3feff, RC: 0, CC: 0 DC: 0 TC: 0
<6>[ 112.090718] vfsspi_work_func_debug ocp state: 0, ocp en: 0 ldo pin: 0, sleep pin: 0, tz_mode: 1
<6>[ 112.390254] Debug Temp for Sensor:
<6>[ 112.390355] (0 --- 40)(1 --- 39)(2 --- 38)(3 --- 40)(4 --- 40)(5 --- 40)(6 --- 40)(7 --- 39)(8 --- 39)(9 --- 40)(10 --- 39)
<6>[ 112.548404] dmesg (5532): undefined instruction: pc=b6deb548
<6>[ 112.548443] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 113.787197] secure_storage_ (5535): undefined instruction: pc=b6e44548
<6>[ 113.787214] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<4>[ 113.797691] QSEECOM: qseecom_load_app: App (sec_stor) does'nt exist, loading apps for first time
<4>[ 113.813220] QSEECOM: qseecom_load_app: App with id 2 (sec_stor) now loaded
<4>[ 113.886957] QSEECOM: qseecom_unload_app: App id 2 now unloaded
<4>[ 114.236388] dhd_wl_ioctl: WLC_SET_VAR: mws_coex_bitmap, ret = -23
<4>[ 114.236412] LTECX_CHAN_BITMAP error -23
<6>[ 114.260260] [SSP] batch 0: delay 66000000, timeout 0, flag 1, ret 0
<6>[ 114.260358] [SSP] batch 0: delay 66000000, timeout 0, flag 0, ret 0
<6>[ 114.260634] [SSP]: set_sensors_enable - new_enable = 1, old_enable = 0
<6>[ 114.260659] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x0, data = 66
<6>[ 114.277962] [SSP], delay 66, timeout 0, flag=0, ret1
<6>[ 114.289037] [SSP]: MSG From MCU - RM 0 1 0 0
<6>[ 114.289046] AR-0,155,-78,-16881
<6>[ 114.289052] AR-0,198,-2,-16845
<6>[ 114.289057] AD 0 2 0 1
<6>[ 114.361413] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<6>[ 114.595632] dmesg (5552): undefined instruction: pc=b6e50548
<6>[ 114.595644] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 114.957791] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=11
<6>[ 115.041899] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<6>[ 116.741258] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[ 116.742308] max77804k_get_input_current: CHG_CNFG_09(0x12)
<7>[ 116.771405] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[ 116.771422] sec-battery battery.97: sec_bat_get_battery_info:Vnow(4388mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(294)
<6>[ 116.794821] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[ 116.796692] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[ 116.796709] sec-battery battery.97: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(4), Vendor(SDI SDI), siop_level(70)
<6>[ 116.796724] sec-battery battery.97: sec_bat_monitor_work: stability_test(0), eng_not_full_status(0) slate_mode(0)
<6>[ 116.799714] healthd: battery l=100 v=4388 t=29.4 h=2 st=5 c=0 o=4 ca=450 ct=1 ps=0 chg=u
<6>[ 117.342213] dmesg (5561): undefined instruction: pc=b6e03548
<6>[ 117.342227] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
Stock:
Code:
[email protected]:/ # dmesg
dmesg
<6>[ 101.327392] synaptics_rmi4_i2c 2-0020: [0][P] 0x01
<6>[ 101.379872] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[4], Ver[A355][0/14]
<6>[ 101.425208] SLIMBUS_0_RX: dpcm: open BE SLIMBUS_0_RX
<6>[ 101.425222] MSM8974 LowLatency: dpcm: open FE MSM8974 LowLatency
<6>[ 101.425287] msm_slim_0_rx_be_hw_params_fixup: format = 2, rate = 48000, channels = 1
<6>[ 101.425296] taiko_esxxx_get_channel_map(): dai_name = taiko_rx1 DAI-ID 0 tx_ch 0 rx_ch 0
<7>[ 101.425306] es705-codec es705-codec-gen0: es705_remote_route_enable():dai->name = taiko_rx1 dai->id = 0
<6>[ 101.425316] taiko_esxxx_hw_params: dai_name = taiko_rx1 DAI-ID 0 rate 48000 num_ch 1
<6>[ 101.425322] taiko_hw_params: dai_name = taiko_rx1 DAI-ID 0 rate 48000 num_ch 1
<7>[ 101.425338] es705-codec es705-codec-gen0: es705_remote_route_enable():dai->name = taiko_rx1 dai->id = 0
<6>[ 101.425350] __q6asm_open_write: session[1] wr_format[0x0]
<6>[ 101.425356] __q6asm_open_write: session[1] open.mode_flags:10000000
<6>[ 101.428819] q6asm_audio_client_buf_alloc_contiguous: session[1]bufsz[960]bufcnt[2]
<6>[ 101.452287] wpa_supplicant (5602): undefined instruction: pc=b6d3b548
<6>[ 101.452299] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
<6>[ 101.456934] es705-codec es705-codec-gen0: es705_remote_cfg_slim_rx(): dai_id = 0
<6>[ 101.456943] Before slim_define_ch:
<6>[ 101.456946] ch_cnt 1,ch_h[0] 16 ch_h[1] 0, grph 272 sampleszbits 16
<3>[ 101.477343] reading MSM_THERM_CH [rc = 0] [adc_code = 31012]
<6>[ 101.717989] Governor: enter mode 0x1
<4>[ 101.719712]
<4>[ 101.719715] Dongle Host Driver, version 1.141.64 (r)
<4>[ 101.719720] Compiled in drivers/net/wireless/bcmdhd4354 on Jul 3 2014 at 14:10:22
<4>[ 101.719730] wl_android_wifi_on in
<4>[ 101.719739] wifi_platform_set_power = 1
<6>[ 101.719746] ------------------------------------------------
<6>[ 101.719754] ------------------------------------------------
<6>[ 101.719762] brcm_wlan_power Enter: power on
<6>[ 101.720346] WL_REG_ON on-step : [0]
<6>[ 101.720356] pcal6416a_gpio_direction_output(off=[8], val=[1])
<6>[ 101.722417] WL_REG_ON on-step-2 : [1]
<6>[ 101.817994] Governor: exit mode 0x0
<4>[ 101.958194] sdio_reset_comm():
<4>[ 102.013000] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 102.016479] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 102.018887] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[ 102.139432] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x0
<4>[ 102.140493] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 102.140893] dhdsdio_download_firmware: firmware path=/system/etc/wifi/bcmdhd_sta.bin, nvram path=/system/etc/wifi/nvram_net.txt_semco3rd
<4>[ 102.226624] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 102.274236] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<4>[ 102.276911] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 102.276920] [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
<4>[ 102.280067] Firmware up: op_mode=0x0005, MAC=84:33:32
<4>[ 102.285947] dhdcdc_set_ioctl: SET PM to 2
<4>[ 102.286257] [WIFI_SEC] sec_control_pm: /data/.psm.info open failed, so set PM to 2
<4>[ 102.287833] [WIFI_SEC] dhd_sel_ant_from_file: File [/data/.ant.info] open error
<4>[ 102.290706] dhd_wl_ioctl: WLC_SET_VAR: pspretend_threshold, ret = -23
<4>[ 102.290713] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
<4>[ 102.296346] Firmware version = wl0: Jun 11 2014 21:58:43 version 7.26.5.2 (A1 Station/P2P) FWID 01-8e4c322
<4>[ 102.296550] [WIFI_SEC] sec_save_wlinfo: .wifiver.info File open failed.
<4>[ 102.297750] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
<4>[ 102.298165] dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -14
<4>[ 102.299421] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 102.299430] [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 84:33:32
<4>[ 102.299590] [WIFI_SEC] Check Mac address in .mac.info
<6>[ 102.300345] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=86:33:32
<6>[ 102.468055] Debug Temp for Sensor:
<6>[ 102.468089] (0 --- 49)(1 --- 45)(2 --- 44)(3 --- 45)(4 --- 47)(5 --- 53)(6 --- 48)(7 --- 47)(8 --- 49)(9 --- 45)(10 --- 44)dhd_wl_ioctl: WLC_SET_VAR: mws_coex_bitmap, ret = -23
<4>[ 102.566476] LTECX_CHAN_BITMAP error -23
<6>[ 102.611939] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<6>[ 102.653459] [email protected] 3
<6>[ 103.178451] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=7
<6>[ 103.308893] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<6>[ 103.335840] [SSP] batch 0: delay 66000000, timeout 0, flag 1, ret 0
<6>[ 103.335880] [SSP] batch 0: delay 66000000, timeout 0, flag 0, ret 0
<6>[ 103.336102] [SSP]: set_sensors_enable - new_enable = 1, old_enable = 0
<6>[ 103.336121] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x0, data = 66
<6>[ 103.344646] [SSP], delay 66, timeout 0, flag=0, ret1
<6>[ 103.355432] [SSP]: MSG From MCU - RM 0 1 0 0
<6>[ 103.355438] AR-0,201,-31,-16894
<6>[ 103.355440] AD 0 2 0 1
<6>[ 103.637994] Governor: enter mode 0x1
<6>[ 105.097993] Governor: exit mode 0x0
<6>[ 105.398623] MSM8974 LowLatency: dpcm: close FE MSM8974 LowLatency
<6>[ 105.439585] SLIMBUS_0_RX: dpcm: close BE MSM8974 LowLatency
<6>[ 105.456839] es705-codec es705-codec-gen0: es705_remote_close_slim_rx(): dai_id = 0
<6>[ 105.577413] dmesg (5668): undefined instruction: pc=b6e48548
<6>[ 105.577455] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)
Any ideas what I could be missing?
SOLVED
Strange I didn't think of checking the logcat output before trying to find something in DMESG.
Anyway, I found this output in logcat once I tried to enable my Wifi:
Code:
E/SecureStorage(21019): [ERROR]:SPID(0x00000000)Client SS library: connect: Connection refused
E/SecureStorage(21019): [ERROR]:SPID(0x00000000)SS_ConnectToDmnSndCmnData error
To fix this you need to disable secure storage in the /system/build.prop
Change
Code:
ro.securestorage.support=true
To
Code:
ro.securestorage.support=false
So now I have a deodexed, pre-rooted, roaming-fixed, debloated, Odin flashable stock image for SM-G900F
Help me, please. How to use build_msm8974pro_kernel.sh? Where can I get a ramdisk.img and ../buildscript/tools/signclient.jar?
I build my our modem files following as: https://forum.xda-developers.com/android/software-hacking/dev-building-qualcomm-modem-sources-t3489833
I have a Moto G X1032 that already unlocked. and also replace the NON-HLOS partition by my our mba.b00/mba.mdt. but when starting, it logs:
4>[ 4427.564452,0] ------------[ cut here ]------------
<4>[ 4427.564673,0] WARNING: at ../../../../../../kernel/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
<4>[ 4427.564786,0] Unbalanced enable for IRQ 404
<4>[ 4427.564980,0] Modules linked in:
<4>[ 4427.565210,0] [<c010bb78>] (unwind_backtrace+0x0/0xec) from [<c0182278>] (warn_slowpath_common+0x54/0x64)
<4>[ 4427.565422,0] [<c0182278>] (warn_slowpath_common+0x54/0x64) from [<c01822b8>] (warn_slowpath_fmt+0x30/0x40)
<4>[ 4427.565633,0] [<c01822b8>] (warn_slowpath_fmt+0x30/0x40) from [<c01e8f3c>] (enable_irq+0x3c/0x74)
<4>[ 4427.565845,0] [<c01e8f3c>] (enable_irq+0x3c/0x74) from [<c0130a48>] (pil_boot+0x80c/0xbf0)
<4>[ 4427.565970,0] [<c0130a48>] (pil_boot+0x80c/0xbf0) from [<c01327a0>] (mss_start+0x2c/0x60)
<4>[ 4427.566183,0] [<c01327a0>] (mss_start+0x2c/0x60) from [<c015c7f0>] (subsystem_get+0x9c/0x178)
<4>[ 4427.566397,0] [<c015c7f0>] (subsystem_get+0x9c/0x178) from [<c014573c>] (msm_ipc_load_default_node+0x34/0x6c)
<4>[ 4427.566611,0] [<c014573c>] (msm_ipc_load_default_node+0x34/0x6c) from [<c014b27c>] (msm_ipc_router_ioctl+0x124/0x2dc)
<4>[ 4427.566827,0] [<c014b27c>] (msm_ipc_router_ioctl+0x124/0x2dc) from [<c0779a08>] (sock_ioctl+0x1c8/0x294)
<4>[ 4427.567043,0] [<c0779a08>] (sock_ioctl+0x1c8/0x294) from [<c026c4e8>] (do_vfs_ioctl+0x3f4/0x5a8)
<4>[ 4427.567166,0] [<c026c4e8>] (do_vfs_ioctl+0x3f4/0x5a8) from [<c026c708>] (sys_ioctl+0x6c/0x7c)
<4>[ 4427.567376,0] [<c026c708>] (sys_ioctl+0x6c/0x7c) from [<c0105ae0>] (ret_fast_syscall+0x0/0x30)
<4>[ 4427.567576,0] ---[ end trace 3373d290566a10f8 ]---
<3>[ 4427.593954,0] pil-q6v5-mss fc880000.qcom,mss: PBL returned unexpected status -274725888
<3>[ 4427.594121,0] pil-q6v5-mss fc880000.qcom,mss: mba: Failed to bring out of reset
<3>[ 4427.594382,0] modem_notifier_cb: sysmon_send_event error -19
<3>[ 4427.594469,0] M-Notify: General: 5
<3>[ 4427.594743,0] msm_ipc_load_default_node: Failed to load modem
<6>[ 4427.599158,0] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0c300000 to 0x0c349000
<4>[ 4427.604425,0] ------------[ cut here ]------------
any one know what cause this?
<3>[ 4427.593954,0] pil-q6v5-mss fc880000.qcom,mss: PBL returned unexpected status -274725888
after my investigation, i think it caused by my mba is blocked by PBL. i read the <<Qualcomm-Secure-Boot>> (you can google it, because i cannot attach a link for newbie) and use the tools in attachments to compared the mba with the official mba.
I got the Certification Store and analysis it. the tool is great that i can verify the mba.b00. but any one know how to generate the certification by reversing way?