[Q] Acer A500 bricked with no CWM - Acer Iconia A500

Desperately need help. I bricked my acer while trying to install itsmagic.
Now I get yellow Asterix with Droid image in recovery mode.
I downloaded multiple update.zip files from various threads and used "apply: sdcard:update.zip" from android system recovery utility.
I always get "E: can't open /sdcard/update.zip"
me being stupid did not note down the Image I had on it before bricking it.
Is there a way to unbrick?

i do not think your tablet is bricked.go to thores full roms thread in dev. Download the correct rom for your area.put your SD card in a android phone format it put the file on your SD card put back in tablet and flash it.
If you did all of this and have a 3.2 rom on your device the above will likely not work.
Good luck

Thank you for the reply
I downloaded one of the full images, renamed them as update.zip and tried to apply from Android System Recovery Utility.
I get the same messages I got earlier
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
I erase all data using my nexus one and then in disc mode I copy the update.zip.
I bought this in US. Could you please suggest me an image I could try?

john_mathews said:
I downloaded one of the full images, renamed them as update.zip and tried to apply from Android System Recovery Utility.
I get the same messages I got earlier
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
I erase all data using my nexus one and then in disc mode I copy the update.zip.
I bought this in US. Could you please suggest me an image I could try?
Click to expand...
Click to collapse
Try a different SD card. The smaller the better

kjy2010 said:
Try a different SD card. The smaller the better
Click to expand...
Click to collapse
Reformat your card and that should work

Thank you for the response. I was using a 4GB microSD and now I switched to 2GB.
Could you please point me to ROM Image for US region?

Related

trying to update from 1.5uk to 1.5 us with no success

What am I doing wrong here guys. Downloaded the rom signedkilla(its offical with the google lock) but everytime i download it the size of the file is 87.7mb where as the update is supposed to be 46.2mb.
I then renamed it update.zip and tried to load it from the sd card, but it says
E:Can't open/cache/recovery/command
Then I tried alt s to apply the update and got this message
E: Can't open/sdcard/update.zip(bad)
Installation aborted.
What am I doing wrong here???
Thanks.
bump a little help please..
22 views and no one knows, come on guys.
Are you currently rooted? Also is your card in FAT32 format?
no not rooted, and not fat32 formatted either.

Wildfire rom install prb.

Hi All. about 3 days trying to install to wildfire rom. gold card I did. I've downloaded too many RUU says all incorrect or customer ID error.
Old Sd card in the phone have an OTA file named OTA_Buzz_Froyo_HTC_TUR_2.34.468.31.28.468.3_releas e_166222nd4emyz0b4lcl3nv.zip
I try to install this file gives error (Status 7)
trying to install custom roms e: can not open / sdcard / update.zip (No such file or directory) error. Before i install custom roms, replace the device's 512 MB card to with 4 GB card its a real problem. Applanet installed. i downloaded rom manager to try with it, package installer says the problem occurred while parsing package device asking adjust time after every boot, When I try to install anything from memory card, with clockwork recovery gives error (Status 0), Pls help.

CWM 5.0.26 - can't install nand roms in zip format!!! HELP

i've been running wp7. yesterday i want to install android nand rom. but when i put the option in cwm install from zip file - the error messege was generated(bad. error). He couldn't to unzip the file. i was trying to install few differnet roms, but without the success.
Any help or idea what the hell is going on?
I flashed my phone many times by android nand roms, and there was never any kind of error.
I've got the Nokia 8gb micro sd-card 6 class of speed.
Czort666 said:
i've been running wp7. yesterday i want to install android nand rom. but when i put the option in cwm install from zip file - the error messege was generated(bad. error). He couldn't to unzip the file. i was trying to install few differnet roms, but without the success.
Any help or idea what the hell is going on?
I flashed my phone many times by android nand roms, and there was never any kind of error.
I've got the Nokia 8gb micro sd-card 6 class of speed.
Click to expand...
Click to collapse
Format your sd card to FAT 32 and perform a task 29 on your phone. Re install the preferred bootloader and cwm and try again.
i did it. about 6 times. all proces.
Czort666 said:
i did it. about 6 times. all proces.
Click to expand...
Click to collapse
first make sure your using the correct 5.0.2.6 recovery for hd2
and that your flash image is big enough
copy the rom.zip ( do not unpack) to your sdcard, either through CWR mounted to usb, or use a cardreader
i am using HD2 Toolkit. Never been any problems. by cardreader or either through CWR , can't install. only messege - bad, error. every rom!! The sd is formated. as usually. i don't know what's happend:/
I'm not a rookie in flashing. it is not ordinary error. it looks like the zip file are corrupted when i am trying to install them by the CWR. After the error when i try to open it the zip file on my computer by the win rar, it tells me that, the zip is corrupted. when i download it the rom the zip was good, cause i check it.
ps. sorry for english
it is no matter what rom i want to install. I always have this messege - "e:can't open /sdcard/roms_name.zip
(bad)
installation aborted
Zip file is good before put him to sdcard. after a press choose zip from sdcard the zip file is corrupted. Maybe something with CWR?;/
Eliminate all the possibilities, if you're using MAGLDR switch over to cLK and vice-versa, and then try again.
carl1961 said:
first make sure your using the correct 5.0.2.6 recovery for hd2
and that your flash image is big enough
copy the rom.zip ( do not unpack) to your sdcard, either through CWR mounted to usb, or use a cardreader
Click to expand...
Click to collapse
u are ****ing awesome sir
Heh, I know the reason why it is happening.
When you are doing the ext partition through CWM, the whole reserved space to this partition is corrupted. That's why there is an error messege when i'm trying to install zip rom. The file is corrupted immediately, and you can't even unpack him in windows, or linux.
Right now I am using the GParted. There is no more errors, after I did the partitions using this program
ufff
Thx 4 help anyway

[Q] Restoring a CWM v5 backup on HD2

Hi,
I without much thinking and reading, searched the keyword "backup" on the play store, installed the first application I found (nandroid) and made a backup of my OS and wiped everything afterwards because I had to get my display replaced after the digitizer started not responding.
But after I got my phone back I realized that I can only flash CWM 3x on HD2 while the backup that nandroid created was for cwm5.
So, I have a backup made for cwm5. Any suggestions on how can I restore this on a hd2?
thanks in advance
Did you try to simply restore the backup?
Sent from my NexusHD2 using xda app-developers app
rivercat said:
Hi,
I without much thinking and reading, searched the keyword "backup" on the play store, installed the first application I found (nandroid) and made a backup of my OS and wiped everything afterwards because I had to get my display replaced after the digitizer started not responding.
But after I got my phone back I realized that I can only flash CWM 3x on HD2 while the backup that nandroid created was for cwm5.
So, I have a backup made for cwm5. Any suggestions on how can I restore this on a hd2?
thanks in advance
Click to expand...
Click to collapse
If you can flash v3 you can flash v5 the same way.
---
With proper diet, rest, and exercise a healthy body will last you a lifetime... (via Tapatalk)
Marvlesz said:
Did you try to simply restore the backup?
Click to expand...
Click to collapse
ny_limited said:
If you can flash v3 you can flash v5 the same way.
Click to expand...
Click to collapse
Well, that's what I thought, but I can't. It won't let me. CWM3 keeps giving the file not found error, and I thought the fact that it's cwm3 is must be the reason why. I'm confused now.
rivercat said:
Well, that's what I thought, but I can't. It won't let me. CWM3 keeps giving the file not found error, and I thought the fact that it's cwm3 is must be the reason why. I'm confused now.
Click to expand...
Click to collapse
Be more specific. What exactly are you doing and what is the error?
---
With proper diet, rest, and exercise a healthy body will last you a lifetime... (via Tapatalk)
ny_limited said:
Be more specific. What exactly are you doing and what is the error?
---
With proper diet, rest, and exercise a healthy body will last you a lifetime... (via Tapatalk)
Click to expand...
Click to collapse
I get into the ad recovery section in magldr, cwm opens, I then choose the backup restore section, it checks my sd card and finds the backup I made, no problem up to this point, I choose the backup I want to restore, the process starts, and then I get the file not found errors, but everything's there in the sd card, I checked.
The errors are like this:
system.img not found. Skipping restore of /system.
data.img not found. Skipping restore of /data.
etc. etc.
Click to expand...
Click to collapse
eventually it skips everything and restores nothing.
rivercat said:
I get into the ad recovery section in magldr, cwm opens, I then choose the backup restore section, it checks my sd card and finds the backup I made, no problem up to this point, I choose the backup I want to restore, the process starts, and then I get the file not found errors, but everything's there in the sd card, I checked.
Click to expand...
Click to collapse
OK, no problem. You misunderstood what I said.
Go to AD Recovery and CWM v3 will open, correct?
Do NOT select /BACKUPRESTORE!
Select INSTALL FROM SD CARD
Of course, you need to have a copy of CWM Recovery v5 on your SD Card - if you do not have it or you have an older v5 download this file and place it on your sd card before you start.
After you install that file reboot and you will have CWM Recovery v5.
Does it make more sense now?
ny_limited said:
OK, no problem. You misunderstood what I said.
Go to AD Recovery and CWM v3 will open, correct?
Do NOT select /BACKUPRESTORE!
Select INSTALL FROM SD CARD
Of course, you need to have a copy of CWM Recovery v5 on your SD Card - if you do not have it or you have an older v5 download this file and place it on your sd card before you start.
After you install that file reboot and you will have CWM Recovery v5.
Does it make more sense now?
Click to expand...
Click to collapse
Yes it does. I will try see if it works tonight. Thanks for your help!
ny_limited said:
OK, no problem. You misunderstood what I said.
Go to AD Recovery and CWM v3 will open, correct?
Do NOT select /BACKUPRESTORE!
Select INSTALL FROM SD CARD
Of course, you need to have a copy of CWM Recovery v5 on your SD Card - if you do not have it or you have an older v5 download this file and place it on your sd card before you start.
After you install that file reboot and you will have CWM Recovery v5.
Does it make more sense now?
Click to expand...
Click to collapse
this is what happens after I choose install zip from sd card option:
Code:
-- Installing: recovery_5.5.0.4-20120909_leo_CWR.zip
Finding update package...
Opening update package...
Installing update...
Clockworkmod Recovery for HD2
Presented by arif-ali , seadersn at xda-developers
Writing recovery partition...
assert failed: write_raw_image("/tmp/recovery.img", "recovery")
E:Error in /sdcard/recovery_5.5.0.4-20120909_leo_CWR.zip
(Status 7)
Installation aborted.
after I rebooted my phone I found out that cwm was corrupted and gave an error when starting, so I had to install it again.
What do I do now?
rivercat said:
this is what happens after I choose install zip from sd card option:
Code:
-- Installing: recovery_5.5.0.4-20120909_leo_CWR.zip
Finding update package...
Opening update package...
Installing update...
Clockworkmod Recovery for HD2
Presented by arif-ali , seadersn at xda-developers
Writing recovery partition...
assert failed: write_raw_image("/tmp/recovery.img", "recovery")
E:Error in /sdcard/recovery_5.5.0.4-20120909_leo_CWR.zip
(Status 7)
Installation aborted.
after I rebooted my phone I found out that cwm was corrupted and gave an error when starting, so I had to install it again.
What do I do now?
Click to expand...
Click to collapse
Well now have less possible issues. This is good.
The error shows you had a problem extracting the image from the zip. That suggests a bad zip or a bad sd card. Have you tried to download another copy of the zip file?
How big is your recovery partition? To flash that recovery you should have 5 MB, 8 if you might want to try other recovery apps later.
How was your device partitioned? Did you use DAF.EXE? If yes, take a look at the flash.cfg file, the line for recovery. If it has "filesize" (or something like it) instead of a number that partition was created to match last image flashed. The word filesize should read 8 MB or at least 5 mb.
If using the hd2 toolkit there should also be a flash.cfg file someplace.
Check that zip file first, however. I can give you a known good recovery and DAF.EXE but you will have to set the correct partition sizes for what you need.
---
Words from the past: "It's a clever idea, Mr. Bell, but don't wire us, we'll wire you."* * (via Tapatalk)

[Q] Nook Color won't boot without SD Card

I know there is a lot of information out here about the nook color not being able to boot but none of it seems to fix this issue. I was trying to upgrade my nook from cyanogenmod 7.2 to cyanogenmod 10.2. I used Rom Manager on the device and downloaded the new ROM. Everything was fine until I told it to install. The nook went to reboot and I was presented with a black screen. I couldn't get it to do anything and I thought it was dead forever. I then installed a bootable ROM on my SD card and was able to get it to boot from the SD card. I have attempted to install several different versions onto the EMMC but none will boot. When I reboot the nook it just goes to a black screen and sits there, even with the SD card in it. This is the only sequence that allows me to get my nook color to boot from an sd card:
1) Hold the "n" and power buttons for 30 seconds (I think this forces it to power down)
2) Push and hold power button for a few seconds.
If I do this with a bootable SD card installed the nook boots the SD card. If I do this without the SD card installed I just get a black screen. I have tried many things from many threads here. I have tried fixing partitions, installing new ROMS and other things but nothing seems to work. I know the nook is not bricked because I can boot it from the SD card. I think the boot partition may be the issue. When I am booted from the SD card I can mount all partitions except "/boot". Should I be able to mount this partition?
I just need to know how to get my nook back to a state where it will boot without the SD card inserted. I know how to create a bootable SD card and install zips.
Very frustrated at this point, guidance that anyone can give would be greatly appreciated...
Thanks.
You said you tried fixing partitions. How did you do that and what were the results? Were you using my partition repair zips from my partition repair thread linked in my signature?
And ROM Manager assumes you have a correct version of CWM installed on internal memory. It is best not to use that tool. It is way outdated. It is best to install ROMs manually with CWM.
Sent from my BN NookHD+ using XDA Premium HD app
deleted post
Partitoning did not seem to help
leapinlar said:
You said you tried fixing partitions. How did you do that and what were the results? Were you using my partition repair zips from my partition repair thread linked in my signature?
And ROM Manager assumes you have a correct version of CWM installed on internal memory. It is best not to use that tool. It is way outdated. It is best to install ROMs manually with CWM.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Yes I have done 2 out of the 3 zips you have on your post. 1) NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip and 2)NookColor-emmc-format-partitions-5-6-7-8.zip. I did not do the partition 2 zip as it looked like it may cause more problems. However, I'm not sure it could get much worse.
Today I ran the RecoveryFix.zip from this post --> http://forum.xda-developers.com/showthread.php?t=958748
No Help. Same issue, I reboot and nothing but a black screen. I have to do the 2 steps I described in my original post to get the SD card to boot. Is there a way I can see what is on the nook partitions? These tools allow me to copy zip files but there is nothing that allows me to look around on the nooks internal partitions. What does the nook need to boot without the SD card. It seems there must be something partially working because I can get the SD card to boot...
Thanks I advance for your help.
Need to fix internal hard drive...
Ok, so now I'm pretty sure it's just my internal memory that is screwed up. I installed CM 7.2 on an SD card and now my nook color is running from the SD card. But if I take the SD card out and try to reboot all I get is a black screen(Not even a flash or anything when hitting the power button). So right not the only thing my nook can do is boot from the SD card.
How can I fix the internal memory??
noooker said:
Ok, so now I'm pretty sure it's just my internal memory that is screwed up. I installed CM 7.2 on an SD card and now my nook color is running from the SD card. But if I take the SD card out and try to reboot all I get is a black screen(Not even a flash or anything when hitting the power button). So right not the only thing my nook can do is boot from the SD card.
How can I fix the internal memory??
Click to expand...
Click to collapse
Try flashing the repair partition 2 zip. It has protections built in to prevent further damage.
Then go to my NC tips thread linked in my signature and return to stock via item A15. Be sure to flash the format zip listed there too. Then you should be able to start over.
Sent from my BN NookHD+ using XDA Premium HD app
Repair Partiton 2 failed
leapinlar said:
Try flashing the repair partition 2 zip. It has protections built in to prevent further damage.
Then go to my NC tips thread linked in my signature and return to stock via item A15. Be sure to flash the format zip listed there too. Then you should be able to start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Ok, I think I may have totally screwed this nook up. I found some other repartition//format zips that I ran trying to fix the problem. Now I can't even run from the SD card. It tries to boot but I get an error and it fails. I tried to run your repairpartition2.zip file but it did not work. This is the output:
E:Can't mount /cache/recovery/last_install
E:failed to open last_instal: no such file or directory
Finding update package...
Opening update package...
Installing update...
Repair /rom partition (P2)
Checking for /factory - if ot found will return error message and repair will be aborted.
assert failed:mount("ext2", "EMMC", "/dev/block/mmcblk0p3", /factory") == "/factory"
E:Error in /sdcard/NookColor-emmc-repair-partition-2.zip
(Status 7)
Installation aborted.​
I've also noticed that it cannot mount any of the partitions from the booted SD card any more. I'm seeing
E:Can't mount /cache/recovery/log and other errors
I think one of the other .zips I ran screwed things up even more. Am I now screwed up past the point of no return? I have very good unix knowledge but very little android knowledge. Is there anything I can do with the adb utility to help here.
Thanks for all your suggestions so far. It seems like I need to redo this thing from scratch and need some guidance on how to do it.
More Info: Now when booted from SD card I cannot mount "/boot", "/system", "/data", "/emmc" or "/cache" partitions. I wish I could get a shell and look around on the rom...
noooker said:
Ok, I think I may have totally screwed this nook up. I found some other repartition//format zips that I ran trying to fix the problem. Now I can't even run from the SD card. It tries to boot but I get an error and it fails. I tried to run your repairpartition2.zip file but it did not work. This is the output:
E:Can't mount /cache/recovery/last_install
E:failed to open last_instal: no such file or directory
Finding update package...
Opening update package...
Installing update...
Repair /rom partition (P2)
Checking for /factory - if ot found will return error message and repair will be aborted.
assert failed:mount("ext2", "EMMC", "/dev/block/mmcblk0p3", /factory") == "/factory"
E:Error in /sdcard/NookColor-emmc-repair-partition-2.zip
(Status 7)
Installation aborted.​
I've also noticed that it cannot mount any of the partitions from the booted SD card any more. I'm seeing
E:Can't mount /cache/recovery/log and other errors
I think one of the other .zips I ran screwed things up even more. Am I now screwed up past the point of no return? I have very good unix knowledge but very little android knowledge. Is there anything I can do with the adb utility to help here.
Thanks for all your suggestions so far. It seems like I need to redo this thing from scratch and need some guidance on how to do it.
Click to expand...
Click to collapse
That error message says your factory partition is gone and it contained info there that is vital and un-retreivable. You might be able to rebuild your partitions but some ROMs will never run without that backup info from /factory (partition 3). You just got too aggressive with your partition repairs.
Sent from my BN NookHD+ using XDA Premium HD app

Categories

Resources