hello friends,
i have htc buzz, bought a half year ago, then rooted my device and installed diff roms like cm7, zeromod, and yesterday install splashmod v1.5 final it was running fine after few hours, i chose to install radio_13.55.55.24h, after installing radio i coudnt be able run some apps like i cannot run gallery, camera...
the error says like this when i try use my mobile " the process android.process.media has stopped working unexpectedly" ---> force close. this error is annoying me as i cudnt use my mobile properly.
i think the problem is in the radio_13.55.55.24h, bcz before flashing the radio my mobile worked gud..
plz suggest me the best possible solution friends..
thank u
take a nandroid back up first..
Try these..
First goto recovery and in advance goto fix permissions.if this falls to solve your problem, try flashing another radio version.
Sent from my HTC Wildfire using xda premium
Hello...
I flash this ROM twice already with total wipe beforehand. Everything works fine and i love it.
But when i go to navigation and set a destination, i get the error “text-to-speech process ended” (I configured the german version, so the error message is also in german). Has someone a solution to that or is anyone experiencing the same problem?!
Greetings
Elmar
hermes_conrad said:
Hello...
I flash this ROM twice already with total wipe beforehand. Everything works fine and i love it.
But when i go to navigation and set a destination, i get the error “text-to-speech process ended” (I configured the german version, so the error message is also in german). Has someone a solution to that or is anyone experiencing the same problem?!
Greetings
Elmar
Click to expand...
Click to collapse
It's a bug with the current version. I would suggest that you wait for tytung to release another update.
Thx for the info... but strange... i read the whole ROM-Thread... there is nothing about that bug as far as i read... maybe i missed it.
Hello again,
With the 1.9 (which I installed straight away from 2.3.5) mine worked fine a couple of times and then yesterday when I actually wanted to take a picture it stopped with the message "Unfortunatelly, Camera has stopped.".
Just now I upgraded to version 1.10 and still it is not working. Everything else works perfectly (big thanks dzo, before this I used your oxygen rom again excellent job).
Any ideas? Is anyone experiencing problems with the camera?
Thanks in advance
only bug i have found is about camcorder,
if you choose "effects" camcorder stops everytime.
You mean it stops and you cannot use it again? min has stopped once and for all!
I rebooted and updated to ver 1.10 butl nothing...
What can be done?
wildwolfx said:
You mean it stops and you cannot use it again? min has stopped once and for all!
I rebooted and updated to ver 1.10 butl nothing...
What can be done?
Click to expand...
Click to collapse
Sorry, i mean it stops but you can start it again.
in your case, you may first wipe all data/cache and dalvik and install 1.10 again.
After updating to 4.4.2 each time i try to make a call I get the com.android.phone has stopped then it will call the number for a few settings and then close up. How can I fix this?
Thanks
nabil alami said:
After updating to 4.4.2 each time i try to make a call I get the com.android.phone has stopped then it will call the number for a few settings and then close up. How can I fix this?
Thanks
Click to expand...
Click to collapse
try to flash stock firmware with odin.
I have exactly the same problem. It works when I remove one of my sim cards from the device, but that's not a solution.. Anyone know what to do? Preferably without doing a factory reset..
Hello frnds!
I am using Samsung S3 NEO with Stock ROM and without ROOT but from the last 3 days, I am unable to use the device! Every 5 seconds this error pops up - Process.com android not responding!
I am simply unable to use the device! Can't even call someone!
I tried a factory reset but of no use! This error still prevails but the occurence duration has been reduced! But, still m unable to use the fon as it just hangs up in between anything and everything!
Pls. help me with it's solution asap! What should I do? Pls...
UPDATE - It asked for updating and I updated my device to 4.4.4 (Stock).
But still, the phone still hangs a lot but the error has changed! Earlier, it showed - Process com android not responding!
But now, it shows - Google Play, Google TV, Google Calendar has stopped working!
These types of errors are being displayed and m still unable to use my device! Pls. let me know it's solution!
techie_vintage said:
Hello frnds!
I am using Samsung S3 NEO with Stock ROM and without ROOT but from the last 3 days, I am unable to use the device! Every 5 seconds this error pops up - Process.com android not responding!
I am simply unable to use the device! Can't even call someone!
I tried a factory reset but of no use! This error still prevails but the occurence duration has been reduced! But, still m unable to use the fon as it just hangs up in between anything and everything!
Pls. help me with it's solution asap! What should I do? Pls...
UPDATE - It asked for updating and I updated my device to 4.4.4 (Stock).
But still, the phone still hangs a lot but the error has changed! Earlier, it showed - Process com android not responding!
But now, it shows - Google Play, Google TV, Google Calendar has stopped working!
These types of errors are being displayed and m still unable to use my device! Pls. let me know it's solution!
Click to expand...
Click to collapse
Try to flash the stock firmware via odin. You can download it on sammobile's firmware section
koroveshi said:
Try to flash the stock firmware via odin. You can download it on sammobile's firmware section
Click to expand...
Click to collapse
Have tried this also! Didn't work! The fon simply doesn't respond at all! M unable to use it!!
Any other solution pls??
Thanks to the bad gplay updates, the software is pretty bugged. Just download the stock firmware and check checksums before flash. Or flash custom rom from the section down below.
Dont know if you already tried but did you do a factory reset after the 4.4.4 update. I know OTA updates shouldn't mess stuff but sometimes they do.
koroveshi said:
Try to flash the stock firmware via odin. You can download it on sammobile's firmware section
Click to expand...
Click to collapse
I have tried this but of no help!
mandzo said:
Dont know if you already tried but did you do a factory reset after the 4.4.4 update. I know OTA updates shouldn't mess stuff but sometimes they do.
Click to expand...
Click to collapse
I even did a factory reset but of no use!
MoHuToP said:
Thanks to the bad gplay updates, the software is pretty bugged. Just download the stock firmware and check checksums before flash. Or flash custom rom from the section down below.
Click to expand...
Click to collapse
I had flashed CM12 (5.1.1). It all went well - the flashing & all! But, i cudn't make any calls!
I have installed this ROM on my S3 Neo! But, m unable to make any call (From the SIM 1. Haven't used SIM 2 coz of the Audio prob being faced in the SIM 2 as mentioned in the thread). Whenever I make a call (sim 1), it gives an error - PROCESS SYSTEM ISN"T RESPONDING! Do u want to close it?
Even if i Click WAIT, nothing happens, there;s just a green screen being continuously displayed for about 30 seconds and then automatically, it gets back to the HOME SCREEN~!
I am unable to receive any incoming call also! The fon automatically reboots if a call comes and once it restarts, it shows the log in MISSED CALL!
Pls. Help! How to solve this out?
UPDATE :- I flashed CM11 after this problem thinking it might solve the problem but of no use again! Even, after installing CM11, I am unable to make any calls! The screen just goes blank! And then automatically gets back to the home screen! It's not showing the error of PROCESS SYSTEM NOT RESPONDING as it used to show up in CM12!
Now, pls. some one tell me it's solution at the earliest!! Pls..
techie_vintage said:
I have tried this but of no help!
I even did a factory reset but of no use!
I had flashed CM12 (5.1.1). It all went well - the flashing & all! But, i cudn't make any calls!
I have installed this ROM on my S3 Neo! But, m unable to make any call (From the SIM 1. Haven't used SIM 2 coz of the Audio prob being faced in the SIM 2 as mentioned in the thread). Whenever I make a call (sim 1), it gives an error - PROCESS SYSTEM ISN"T RESPONDING! Do u want to close it?
Even if i Click WAIT, nothing happens, there;s just a green screen being continuously displayed for about 30 seconds and then automatically, it gets back to the HOME SCREEN~!
I am unable to receive any incoming call also! The fon automatically reboots if a call comes and once it restarts, it shows the log in MISSED CALL!
Pls. Help! How to solve this out?
UPDATE :- I flashed CM11 after this problem thinking it might solve the problem but of no use again! Even, after installing CM11, I am unable to make any calls! The screen just goes blank! And then automatically gets back to the home screen! It's not showing the error of PROCESS SYSTEM NOT RESPONDING as it used to show up in CM12!
Now, pls. some one tell me it's solution at the earliest!! Pls..
Click to expand...
Click to collapse
Maybe an EFS error, restore EFS partition and see if permissions are set correctly
sev3n1985 said:
Maybe an EFS error, restore EFS partition and see if permissions are set correctly
Click to expand...
Click to collapse
I have a query! Is EFS only meant for IMEI related probs? Just asking becoz my fon is showing the IMEI Number and i am able to send and receive sms but problem is only with the calling! Can't make or receive any call!!
techie_vintage said:
I have a query! Is EFS only meant for IMEI related probs? Just asking becoz my fon is showing the IMEI Number and i am able to send and receive sms but problem is only with the calling! Can't make or receive any call!!
Click to expand...
Click to collapse
Try with a complete wipe of cache, system, data, dalvik, and internal memory, after that reinstall cm11 rom
sev3n1985 said:
Try with a complete wipe of cache, system, data, dalvik, and internal memory, after that reinstall cm11 rom
Click to expand...
Click to collapse
I just tried this too but the problem still exists!! I am unable to call!!! What should I do now?