Related
I9000 unlock instructions
1. Power on the phone and go to Applications->Settings->About Phone->USB
settings
2. Select Mass Storage
3. Connect the phone to USB cable
4. Swipe down the top notification bar then tap “USB Connected” then select
MOUNT
5. Copy update.zip file to phone mass storage root
6. Power off the phone
7. Press Volume Up+Home+Power on key to start the phone into recovery
mode
8. Go to “apply sdcard:update.zip” using volume keys then select it using
home key
9. Power on the phone then go to Andoid Market and install Terminal
Emulator
10. Run Terminal Emulator
11. Type cat /efs/nv_data.bin >> /sdcard/nv_data.bin into terminal then type
Enter
12. Connect the phone to PC in USB Storage Mode then copy nv_data.bin file
to your pc
13. Open nv_data.bin file with any hex editor (ex. Hex workshop) then go to
address 00181460
14. There are the codes
15. Power on the phone with any unaccepted sim card inside then type in the
first code to unlock the phone
http://www.mediafire.com/?3v6vsqh9qorrwn2
http://www.mediafire.com/?o8djyf4moc9ae44
use thanks button
http://forum.xda-developers.com/showthread.php?t=762384
This is a double post.
And there is no 'thanks' button
Tyxerakias said:
And there is no 'thanks' button
Click to expand...
Click to collapse
Maybe he copy-pasted from a forum that has one?
I am following 100% tutorial but I am unable to unlock my I9000. Look at the screenshot for the error that I encounter.
I have put the update.zip in root of phone memory, root of MicroSD etc but no chance. Do I need to root the phone or what's the problem?
Thanks
Hi,
I have a NSPRO box and read the unlock code, but as I insert it, it doesn't unlock the phone.
As this didn't work, I tried your method, and the code that showes up is the same as read by NSPRO box, and... it still doesn't work.
Attached is the printscreen of the HEX area where the code is. I've noticed it says "18146D" and not "181460" as your indicated. Could this be the reason why the code doesn't work?
Please help...
Hello,
I install z4mod, and I patch kernal, and it's fine, after that I don't what I do , I do convert to filesystem, after that open till galaxy s come the shutdown.
I use froyo 2.2
please help me?
I can not open phone in download mode or recovery by using 3 buttons.
All I can say is that if you cannot access download mode you're in trouble. :/
so what can I do,
any idea
If you can't get into download mode you may have bricked your phone, the only way to fix it is to make a homemade jig or put your phone in the oven. I'm not sure what your preference may be...
EDIT: In future please do not post in this section just to get your thread more attention .
I use
Z4mod over in I9000 converts data to ext2
and it's not open download mode from begening when it normal mode,
any news,,,,
PaulForde said:
If you can't get into download mode you may have bricked your phone, the only way to fix it is to make a homemade jig or put your phone in the oven. I'm not sure what your preference may be...
EDIT: In future please do not post in this section just to get your thread more attention .
Click to expand...
Click to collapse
NEVER do that nonsense.
dnsp said:
NEVER do that nonsense.
Click to expand...
Click to collapse
yeah, not with the oven
but the trick with the hair blower works and also just recently has rescued another unfortunate soul (not me)
Isn't it possible to get into download mode by adb? I did it a few times, but i can find the tutorial only on a german forum called android-hilfe.de.
It worked for me a few times:
1: Install Kies (probably you did already)
2. install adb for windows ( don't know where to get it, sorry)
3. install odin 1.3
4. open command line and navigate to adb folder
5. start odin
6. place command line-window and odin window so, that you can see both.
7. write in command line: "adb reboot download" and press enter ( starts daemon)
8. remove battery
9. connect the phone to pc using usb cable
10. put the battery in the phone again
11. write in command line: "adb reboot download", DO NOT PRESS ENTER
12. wait until it shows the battery symbol on your phone, indicating that its loading. press power button
13. now look at odin. when the Com-Port becomes yellow, press the enter button in command line, where you wrote "adb reboot download" before.
Now you are in DL-Mode.
Hope it works and someone maybe can give you a better written tutorial with a link to adb. Like i said, it worked for me.
eeegamer said:
Isn't it possible to get into download mode by adb? I did it a few times, but i can find the tutorial only on a german forum called android-hilfe.de.
It worked for me a few times:
1: Install Kies (probably you did already)
2. install adb for windows ( don't know where to get it, sorry)
you mean adbRecovery
3. install odin 1.3
4. open command line and navigate to adb folder
you mean by command prompt, can give me simple,
5. start odin
6. place command line-window and odin window so, that you can see both.
7. write in command line: "adb reboot download" and press enter ( starts daemon)
8. remove battery
9. connect the phone to pc using usb cable
10. put the battery in the phone again
11. write in command line: "adb reboot download", DO NOT PRESS ENTER
12. wait until it shows the battery symbol on your phone, indicating that its loading. press power button
13. now look at odin. when the Com-Port becomes yellow, press the enter button in command line, where you wrote "adb reboot download" before.
Now you are in DL-Mode.
Hope it works and someone maybe can give you a better written tutorial with a link to adb. Like i said, it worked for me.
Click to expand...
Click to collapse
thanx bro,,
Plz plz don't do stuff to your phone if you don't have 3button working.
I beg you.
Apply the 3button patch to get it working then proceed.
thanx eeegamer
but give me
error: device not found
I do what you said
Daneshm90,
the 3 butons not work with me, before the I got this problem, it's from the factory,
almuhajir said:
Daneshm90,
the 3 butons not work with me, before the I got this problem, it's from the factory,
Click to expand...
Click to collapse
Yes but there are patches on this forum that fix that.
Research and the world is yours
Daneshm90 said:
Yes but there are patches on this forum that fix that.
Research and the world is yours
Click to expand...
Click to collapse
please help, my head was broken, from morning I research,
Well firstly your original post is very confusing.
Im assuming english isn't your first tongue, if not plz use something like google translate which might do a better job.
Is ur situation that you want to flash something and don't know how ? Or you flashed something and can't boot into the os and have neither download mode / recovery mode at ur dispense ?
I assume you are saying that now when you are switching on your phone you are not getting startup screen of I9000 and you are getting a small icon showing broken connection with phone and PC.
If this is the case, you can try doing following trick
1. switch off phone and remove battery
2. Plug your USB with phone and PC
3. Start ODIN V3
4. Now press vol down + menu (Centre button) and power on
5. Insert your battery
6. If Odin will show your phone connected you are safe
7. if not try it again (do it 10 times)
Once Odin will detect your phone...flash any stock ROM from forum.
If unfortunately this does not work, then use hot-blower option.
1. Switch off your phone take out battery
2. use hot blower (hair dryer or something else) on the part where battery is placed.
3. Heat till the time you can tolerate...dont worry nothing will happen to Galaxy
4. Now press vol down + menu (Centre button) and power on
5. Insert your battery
6. Your phone should show yellow screen of downloading
Above trick seems insane but believe me it saved me (Thank God)
Galaxy S can not be unbricked (at least easily by any RM) I have faced this situation many times and come over it.
Let me know how it goes.
Before all of these I install OneClickLagFix v2.2, but I got same problem, and I use adbRecovery and I solve the problem.
First I install z4root and i root my device, then I install z4mod and I patch device kernel, after that, I choose converts data to filesystem, then the device rebooted automatically, until show logo GALAXY S, then the screen come black and vibrate allways,
The problem also when I connect it to USB my computer does not get the device,
But in the problem I have it now the adbRecovery not do any thing
Oh you are safe then...
Press vol up + menu + power button
once it shows Samsung logo leave the power button but keep pressing menu + vol up. After 4 seconds leave these button also.
Your phone should go to recovery mode.. then flash any rom..
If this does not work then use below:
1. switch off phone and remove battery
2. Plug your USB with phone and PC
3. Start ODIN V3
4. Now press vol down + menu (Centre button) and power on
5. Insert your battery
6. If Odin will show your phone connected you are safe
7. if not try it again (do it 10 times)
Once Odin will detect your phone...flash any stock ROM from forum.
almuhajir said:
thanx eeegamer
but give me
error: device not found
I do what you said
Click to expand...
Click to collapse
C:\android-sdk-windows\tools>adb ls
Android Debug Bridge version 1.0.26
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this ocmmand with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
C:\android-sdk-windows\tools>
C:\android-sdk-windows\tools>adb devices
List of devices attached
1000efxxxx758 device
C:\android-sdk-windows\tools>
I don't know about you, but SuperOneClick's Allow Non Market Apps feature didn't work for me. When I went to setting>applications there was no check box for Unknown sources present. I got it by using Root Explorer and SQLight Editor (both on the market)
1. Use "RootExplorer" take you to
/data/data/com.motorola.android.providers.settings/databases/settings.db/settings
2. click on the "Value" colum of "force_only_market_apps"
3. Press "menu" button and select "Edit Field"
4. Change "1" to "0", then save.
Without even doing a factory reset or just a regular reboot you should have an unknown sources box available in your settings>applications.
That's not how it works. When you use the option in SuperOneClick, it enables that option for you, even if it doesn't show up in settings>applications.
Thanks. When using SuperOneClick I was able to root, but I wan't able to allow Unknown Sources through Settings->Applications.
Now it works!
thanks, sideloading didnt work for me using aroot.
i rooted using SOC a while ago, and DLed the official PSN apk yesterday since it's not on the US market, and installed it by clicking the apk in file manager with no problem.
Thank you so much! This finally worked! Using aRoot/GladEnable/SuperOneClick , all of them SAID it was enabled but it clearly wasn't ... when I navigated to the db field it was still at '1' .. thanks for this, finally it's working
i am on gingerblur, and when clicking the menu button i don't get a dialog to do anything. Maybe a bug of the theme?
So i can't use root explorer to do this, but anyway this is useful since now i know the database name and can do it by hand...
For those that want to do this by hand:
-connect your phone via usb, enable usb debugging
-from a command line, go where you have adb installed (android sdk or many scripts on this forum)
-run adb shell, then su. accept the message on the phone if prompted.
-type: sqlite3 /data/data/com.motorola.android.providers.settings/databases/settings.db "UPDATE settings SET value=0 WHERE name='force_only_market_apps';" then enter, and you are done
franciscojavierleon said:
For those that want to do this by hand:
-connect your phone via usb, enable usb debugging
-from a command line, go where you have adb installed (android sdk or many scripts on this forum)
-run adb shell, then su. accept the message on the phone if prompted.
-type: sqlite3 /data/data/com.motorola.android.providers.settings/databases/settings.db "UPDATE settings SET value=0 WHERE name='force_only_market_apps';" then enter, and you are done
Click to expand...
Click to collapse
I tried this and it did not work just said sqlite3 not found. Type exit and type exit then type sqlite3 /data/data/com.motorola.android.providers.settings/databases/settings.db "UPDATE settings SET value=0 WHERE name='force_only_market_apps';" it just locked up terminal. If I type sqlite3 before adb shell it finds it.
Used root explorer and copied settings.db to sdcard. Once there used as a disk drive on computer. Edited it with navcat for sqlite and saved it. Then disconnected it for computer used root explorer and copied it back to data and overwrote existing file. Rebooted and all was fine.
I did everything, but I am not able to edit the field...
"Thanks
manpreet14 said:
I did everything, but I am not able to edit the field...
"Thanks
Click to expand...
Click to collapse
thanks much
i got it
BravoMotorola said:
I don't know about you, but SuperOneClick's Allow Non Market Apps feature didn't work for me. When I went to setting>applications there was no check box for Unknown sources present. I got it by using Root Explorer and SQLight Editor (both on the market)
1. Use "RootExplorer" take you to
/data/data/com.motorola.android.providers.settings/databases/settings.db/settings
2. click on the "Value" colum of "force_only_market_apps"
3. Press "menu" button and select "Edit Field"
4. Change "1" to "0", then save.
Without even doing a factory reset or just a regular reboot you should have an unknown sources box available in your settings>applications.
Click to expand...
Click to collapse
Thanx. Very useful info.
Worked for me.
Thanks
Works Great. Thank you!
is there a way to enable side loading with out rooting the phone?
aszrael1266 said:
is there a way to enable side loading with out rooting the phone?
Click to expand...
Click to collapse
sideload wonder machine. look it up. pretty easy.
BravoMotorola said:
I don't know about you, but SuperOneClick's Allow Non Market Apps feature didn't work for me. When I went to setting>applications there was no check box for Unknown sources present. I got it by using Root Explorer and SQLight Editor (both on the market)
1. Use "RootExplorer" take you to
/data/data/com.motorola.android.providers.settings/databases/settings.db/settings
2. click on the "Value" colum of "force_only_market_apps"
3. Press "menu" button and select "Edit Field"
4. Change "1" to "0", then save.
Without even doing a factory reset or just a regular reboot you should have an unknown sources box available in your settings>applications.
Click to expand...
Click to collapse
Thanks for this instruction...
Even though this thread is a little old it did help me and therefore want to add my two cents worth to possible help others who may be having issues. I have a rooted Motorola Flipside.
I purchased SQL Lite Editor from the market and was able to change the value directly in it. Here's how:
1. Download and install SQL Lite Editor from the market.
2. Start SQL Lite Editor to display a list of the applications installed on your device.
3. Look for the application titled Settings Storage (and in smaller print underneath it will display "com.motorola.android.providers.settings".
4. Select Settings.db.
5. Select Settings.
6. In the list of columns scroll down to item #70, "force_only_market_apps" and select it.
7. Click the shortcut menu on your device and select Edit Record.
8. Change the value from 1 to 0 then save and exit SQL Lite Editor.
9. Go to Settings > Applications. Unknown Sources will be visible and you will be able to check it.
Hope this helps anyone else who has issues.
Regards,
Greg
franciscojavierleon said:
For those that want to do this by hand:
-connect your phone via usb, enable usb debugging
-from a command line, go where you have adb installed (android sdk or many scripts on this forum)
-run adb shell, then su. accept the message on the phone if prompted.
-type: sqlite3 /data/data/com.motorola.android.providers.settings/databases/settings.db "UPDATE settings SET value=0 WHERE name='force_only_market_apps';" then enter, and you are done
Click to expand...
Click to collapse
You are awesome buddy.. thanx
Hi all, this is not mine.
Credit goes to - http://code.google.com/p/androidscreencast/
I'm sharing with this you.
Installation
1 - Install the android sdk (download here)
2 - Connect your device through USB cable and ensure it's detected with "adb devices"
3 - Make sure you have Java Runtime Environnement 5 or later installed.
4 - Click HERE -http://androidscreencast.googlecode.com/svn/trunk/AndroidScreencast/dist/androidscreencast.jnlp . You can launch it by typing "javaws androidscreencast.jnlp" from a command line.
If mouse/keyboard control doesn't work, open a command line and type :
**adb shell
**su
**chmod 777 /data/dalvik-cache
**cd /data/dalvik-cache
**chmod 777 ./
Features
**Mouse and keyboard control FOR ROOTED DEVICES ONLY
**Landscape mode (right click)
**Video recording
**Basic file browser
Current limitations
**Slow refresh rate (about 4-5 fps)
**Not all keycode are mapped. See KeyMapping
Todo
**Automatic screen rotation based on the device current state.
**Improve speed
**Audio redirection
How can i help ?
Just visit here - http://code.google.com/p/androidscreencast/
and Donate them
For Installation-
Copy the downloaded androidscreencast.jnlp file to anywhere you want.
Run Command Prompt.
Go to the folder that u have placed aandroidscreencast.jnlp
Type this javaws androidscreencast.jnlp
THANKS TO JORDAN011 FOR SOME OF THIS INFO. i tried the origional post but got confused with some of the bits esspeciaolly as i didnt find mention of installing Java which was a big stumbling block so i did more tial and error and research and Rooted my Kindle - heres what i did with links: hope it helps (sorry pics didnt come out and niether did the highlighted instructions but short of time and have to popout -- follow it word for word and it will definately work
1. Turn your Kindle Fire on and swipe down the top bar and tap on More+
2. Goto device and turn on the “allow installation of applications” button (ontop of the reset factory defaults)
3. Go back and then goto Security and turn on the “enable ADB” button
4. On your PC Figure out if you have 32 bit or 64 bit windows running and download the correct versions of java and android sdk below:
5. Download and install Java se7u11 the JDK file. From http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html. This is needed for the android SDK to work (otherwise ADB wont work). You may have to register and reboot
6. Download android SDK then extract the folder to your desktop and install the (green icon). download from https://developer.android.com/sdk/index.html
7. If you have installed java and the android sdk – you should get the following screen:
8. If SDK manager asks you to install any missing packages (button on bottom right corner) then install them/accept and install
9. Download then extract to desktop and install the Kindle fire ADB Drivers (don’t worry if there’s an error message – Just install Anyway as its an unsigned file. Download from http://forum.xda-developers.com/showthread.php?t=1893838
10. Open up device manager ie start/control panel/hardware and sound/devices and printers/device manager
11. Turn on your kindle and plug it into the PC
12. Your kindle should be recognised in device manager as Andriod composite adb interface.
13. Download Bin4rysroot from here http://uploaded.net/file/0fpyh5c5
14. download Quemu root from here http://forum.xda-developers.com/showthread.php?t=1893838
15. Extract both the above files to your C Drive into two new folders and rename the folders Qemu (for quemuroot contents) and Root (forbin4ryroot contents)
16. THE ROOTING PART NOW!!
17. On the Pc goto Start and type in CMD then right click on the CMD icon at the top of the window and select “Run as Administrator” and hit yes if the User Account Control window pops up and a dos window will appear
18. Copy and past (or type this into the window) cd ..\..\Root then hit enter
19. Copy and past (or type this into the window) runme.bat then hit enter
20. When the screen shows an interface, type 1 then hit enter, A lot of errors will show up but that's fine
21. When your kindle shows a "Restore" screen hit restore my data your kindle will restore and reboot (may take some time be patient!)
22. After it finishes out you should get a command line on the pc saying “press any key to continue” when you do that you will see C:|\Root>
23. Copy and past (or type this into the window) cd ..\Qemu then hit enter
24. Copy and past (or type this into the window) rootqemu.bat then hit enter
25. When you get another interface type 1, then hit enter, press enter twice until it starts the steps.
26. It'll restart your kindle a couple times make sure you don't press enter until it has booted up again whenever it prompts you to (ie wait 3 mins before pressing enter) your Now rooted – you don’t have to press any key on the pc now.
27. If you want proof, you can download Es File explorer and in the apps settings goto root settings grant it Root permissions in the settings by ticking root explorer boxe and clicking yes and grant for both
:good: thank for sharing..wil try root my kindle fire...cheerzz
Thought this was great, could finally get my mum's Kindle rooted and put Play Store on it....... Then found that it says I've reached my download limit and that I need to register and pay...
Back to the drawing board.
patel989 said:
THANKS TO JORDAN011 FOR SOME OF THIS INFO. i tried the origional post but got confused with some of the bits esspeciaolly as i didnt find mention of installing Java which was a big stumbling block so i did more tial and error and research and Rooted my Kindle - heres what i did with links: hope it helps (sorry pics didnt come out and niether did the highlighted instructions but short of time and have to popout -- follow it word for word and it will definately work
1. Turn your Kindle Fire on and swipe down the top bar and tap on More+
2. Goto device and turn on the “allow installation of applications” button (ontop of the reset factory defaults)
3. Go back and then goto Security and turn on the “enable ADB” button
4. On your PC Figure out if you have 32 bit or 64 bit windows running and download the correct versions of java and android sdk below:
5. Download and install Java se7u11 the JDK file. From http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html. This is needed for the android SDK to work (otherwise ADB wont work). You may have to register and reboot
6. Download android SDK then extract the folder to your desktop and install the (green icon). download from https://developer.android.com/sdk/index.html
7. If you have installed java and the android sdk – you should get the following screen:
8. If SDK manager asks you to install any missing packages (button on bottom right corner) then install them/accept and install
9. Download then extract to desktop and install the Kindle fire ADB Drivers (don’t worry if there’s an error message – Just install Anyway as its an unsigned file. Download from http://forum.xda-developers.com/showthread.php?t=1893838
10. Open up device manager ie start/control panel/hardware and sound/devices and printers/device manager
11. Turn on your kindle and plug it into the PC
12. Your kindle should be recognised in device manager as Andriod composite adb interface.
13. Download Bin4rysroot from here http://uploaded.net/file/0fpyh5c5
14. download Quemu root from here http://forum.xda-developers.com/showthread.php?t=1893838
15. Extract both the above files to your C Drive into two new folders and rename the folders Qemu (for quemuroot contents) and Root (forbin4ryroot contents)
16. THE ROOTING PART NOW!!
17. On the Pc goto Start and type in CMD then right click on the CMD icon at the top of the window and select “Run as Administrator” and hit yes if the User Account Control window pops up and a dos window will appear
18. Copy and past (or type this into the window) cd ..\..\Root then hit enter
19. Copy and past (or type this into the window) runme.bat then hit enter
20. When the screen shows an interface, type 1 then hit enter, A lot of errors will show up but that's fine
21. When your kindle shows a "Restore" screen hit restore my data your kindle will restore and reboot (may take some time be patient!)
22. After it finishes out you should get a command line on the pc saying “press any key to continue” when you do that you will see C:|\Root>
23. Copy and past (or type this into the window) cd ..\Qemu then hit enter
24. Copy and past (or type this into the window) rootqemu.bat then hit enter
25. When you get another interface type 1, then hit enter, press enter twice until it starts the steps.
26. It'll restart your kindle a couple times make sure you don't press enter until it has booted up again whenever it prompts you to (ie wait 3 mins before pressing enter) your Now rooted – you don’t have to press any key on the pc now.
27. If you want proof, you can download Es File explorer and in the apps settings goto root settings grant it Root permissions in the settings by ticking root explorer boxe and clicking yes and grant for both
Click to expand...
Click to collapse
I get to step #2 in the script
Step 2 - Exploiting...
/system/bin/sh: cannot create /data/local.prop: Permission denied
My kindle is 10.2.6_user_2630020
What else can be done?
Thank you.
snoopdujour said:
I get to step #2 in the script
Step 2 - Exploiting...
/system/bin/sh: cannot create /data/local.prop: Permission denied
My kindle is 10.2.6_user_2630020
What else can be done?
Thank you.
Click to expand...
Click to collapse
This happened to me. And I googled extensively about the problem. Honestly.. the only thing to do is keep running the script.. worked for me after about 20 tries. Sorry I couldn't be of more help.
snoopdujour said:
I get to step #2 in the script
Step 2 - Exploiting...
/system/bin/sh: cannot create /data/local.prop: Permission denied
My kindle is 10.2.6_user_2630020
What else can be done?
Thank you.
Click to expand...
Click to collapse
Nothing. It's normal and doesn't mean anything. Root still works even with the error
--
Sent from my Kindle Fire 2, CM 10.1
Rooting Kindle Fire 10.2.6
I was able to get my Kindle Fire .v2 rooted. I ran through the process again. This time going back to the beginning.
I wasn't able to get it to run, so I refreshed the files, and ran it again. It took 2 attempts to get the first script to run. I thought it didn't run, so I was searching for a reason why. Then I looked up, and the script had finished. Then it took 3 times for the second part of the script to complete.
After getting the the launcher I wanted installed (APEX failed, so did Novo and a few others) AWD worked, but I was unable to get it to be the default launcher. (the kindle launchers 'default' settings were grayed out.
I then went into /system/app and renamed Launcher.apk to Launcher Default.apk and the com.awd.launcher-1.apk to Launcher.apk.
the system didn't respond when I pressed the home key, so I took a chance and rebooted my kindle.
When it rebooted, I was asked which launcher I wanted to use, so I clicked set as default, and clicked on AWD.
All is good now. Thanks
help
i keep getting a runme.bat is not recognized as a internal or external command , operable program or batch file
when i select 1 and hit enter i'm not getting the restore screen on the kindle it just says that it couldnt' push busybox and superuser and then it asks me wich superuser i want too install 1 or 2 and when i select one it just goes back too prompt. any ideas drivers are all good adb good cant figure it out
hey did u ever get help with that
blythefam5 said:
i keep getting a runme.bat is not recognized as a internal or external command , operable program or batch file
Click to expand...
Click to collapse
hey did u ever get help with that
Work for 10.4.6?!?
Does this work on 10.4.6 at all? My kindle is running this software atm
Thanks
Lewiswatson99 said:
Does this work on 10.4.6 at all? My kindle is running this software atm
Thanks
Click to expand...
Click to collapse
Use step 1 http://forum.xda-developers.com/showthread.php?t=2075959
Hello everyone, need help
I've got Amazon Kindle Fire HD, the version is 10.2.6. Want to unlock it. I follow this instructions step by step, then i stumbled on the 18 step.
It says "Copy and past (or type this into the window) cd ..\..\Root then hit enter" I type everything as written and system says that it is not able to find the reqested path..( What should I do? Maybe I should type same exact address instead of ..\.. ? Thank you for your response in advance.:angel:
Vitaliy7 said:
I've got Amazon Kindle Fire HD, the version is 10.2.6. Want to unlock it. I follow this instructions step by step, then i stumbled on the 18 step.
It says "Copy and past (or type this into the window) cd ..\..\Root then hit enter" I type everything as written and system says that it is not able to find the reqested path..( What should I do? Maybe I should type same exact address instead of ..\.. ? Thank you for your response in advance.:angel:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2075959