Related
As a disclaimer, I have already searched and found some people with the same issue. What I haven't found is someone that arrived at this problem in the same way I did. I am scared ****less of bricking my phone (and hope I haven't already). So at this point, I am looking for some help to figure out my best course of action.
I recently updated to JF1.5 using his updater app, and everything worked. Today when I received my new SDcard, I started the process to get apps on my SD following this tutorial: http://forum.xda-developers.com/showthread.php?t=512743
I got as far as partitioning my card using the Apps2SD application as described, doing everything the tutorial says. I began the partition on my phone, and let it sit.....and sit, and sit. It sat frozen on the partitioning screen (the one with the slider to select the size) for almost an hour before i pulled the battery. I selected 1444mb for the ext2 after reading that it was not a good idea to go higher than 1500mb.
Now, as stated the phone boots to the G1 splash and goes nowhere. I am however still able to boot in recovery mode using Home+Power. Interestingly, it says at the top:
"Android system recovery utility
Build: JFv1.42"
Not sure if this means that 1.5 didn't install correctly or what, but that's what it says.
I have no idea what to do at this point, and am scared to go on without some candid advice. Sorry for the noobishness of my description - if there is anything else needed to give accurate advice please let me know. Also thanks in advance for any help I can get!
Same thing happened to me, you have to reflash. I tried using that method and it never worked for me, although I already had the partition. So reflash jf 1.51 and you are golden. BTW that text you see in recovery is the recovery image version, until you switch to another it will say that.
meoshe said:
Same thing happened to me, you have to reflash. I tried using that method and it never worked for me, although I already had the partition. So reflash jf 1.51 and you are golden. BTW that text you see in recovery is the recovery image version, until you switch to another it will say that.
Click to expand...
Click to collapse
Thanks for the response. I'll have to find a way to get that image onto my SD card. I just bought a 16BG card and that was the card I was using when I ran into this problem.....oh wait a sec....
I'm assuming that the JF1.51 update.zip will still be on my old 1GB card from when I updated to JF1.51 via his updater app last week? If so then my life will be a lot easier, and I'll just swap back to that card, boot up in Recovery, flash from update.zip, and that should be it?
Just want to make sure before I put that old card back in and try to flash....
try wiping before you update? Also to mount your SDcard (if you need to) press alt-x in recovery (or in adb shell) and type
Code:
echo /dev/blockl/mmdblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
x2 that's what i had to do since my computer stopped reading sd cards.
Wipe then update.
I'd also recommend using CMv3.4 because the apps2sd is automated. It runs a2sd by itself
And with Cyanogen Recovery v1.2 you can move apps to sd card
First off, just want to thank everyone for the help. I successfully reflashed with jf1.51, but now I can't seem to sign in. I'm on the welcome screen, skipped the tutorial, entered my Gmail account and it sits for awhile trying to contact the server and then says there's a problem with the service or my sim card.
I know my sim card is provisioned for data, so not sure what's happening here...any ideas?
EDIT: Forgot I had to enter the Rogers APN settings, trying that now (Duhhh)
Abolfazl said:
Wipe then update.
I'd also recommend using CMv3.4 because the apps2sd is automated. It runs a2sd by itself
And with Cyanogen Recovery v1.2 you can move apps to sd card
Click to expand...
Click to collapse
I'm interested in this Cyanogen stuff, but no idea where to start. Any good tutorials? I was following this scene for awhile but kinda lost touch a few months ago - turns out there's been lots of developments.
t3mp3st said:
First off, just want to thank everyone for the help. I successfully reflashed with jf1.51, but now I can't seem to sign in. I'm on the welcome screen, skipped the tutorial, entered my Gmail account and it sits for awhile trying to contact the server and then says there's a problem with the service or my sim card.
I know my sim card is provisioned for data, so not sure what's happening here...any ideas?
EDIT: Forgot I had to enter the Rogers APN settings, trying that now (Duhhh)
I'm interested in this Cyanogen stuff, but no idea where to start. Any good tutorials? I was following this scene for awhile but kinda lost touch a few months ago - turns out there's been lots of developments.
Click to expand...
Click to collapse
It is pretty cut and dry. Cyanogen's Mod unleashes the G1 to its max. Apps2sd is automated and is working before you can even turn your phone on.
CMv3.4
CM Recovery v1.2
Abolfazl said:
It is pretty cut and dry. Cyanogen's Mod unleashes the G1 to its max. Apps2sd is automated and is working before you can even turn your phone on.
CMv3.4
CM Recovery v1.2
Click to expand...
Click to collapse
Cool, I guess I'll try it out now before trying to restore everything. I don't see a tutorial for it though, or am I to just follow the previous "How to root" tutorial and just use his image as the update.zip?
t3mp3st said:
Cool, I guess I'll try it out now before trying to restore everything. I don't see a tutorial for it though, or am I to just follow the previous "How to root" tutorial and just use his image as the update.zip?
Click to expand...
Click to collapse
no no no! just rename CM3.4 to update.zip, enter recovery (Home+power) wipe (alt+w) and flash (alt+s) after it says installation successful, reboot (Home+back)
you might also want to download his recovery image 1.2 like suggested in the posts above me
place the recovery image on your sdcard, do not rename it and do
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
alritewhadeva said:
no no no! just rename CM3.4 to update.zip, enter recovery (Home+power) wipe (alt+w) and flash (alt+s) after it says installation successful, reboot (Home+back)
you might also want to download his recovery image 1.2 like suggested in the posts above me
place the recovery image on your sdcard, do not rename it and do
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
Click to expand...
Click to collapse
Thanks a lot, going to try that now with my 16GB card. And just to be clear (last questions in this thread, I PROMISE!), I should flash with CM3.4 and THEN install the recovery image, or vice versa?
Also, with CM3.4, will I have to go through to steps again to try to partition my card (which is where i ran into the problem from post #1), or is there some automatic process built into his super-de-duper ROM?
Thanks again to all for the speedy responses!!
t3mp3st said:
Thanks a lot, going to try that now with my 16GB card. And just to be clear (last questions in this thread, I PROMISE!), I should flash with CM3.4 and THEN install the recovery image, or vice versa?
Also, with CM3.4, will I have to go through to steps again to try to partition my card (which is where i ran into the problem from post #1), or is there some automatic process built into his super-de-duper ROM?
Thanks again to all for the speedy responses!!
Click to expand...
Click to collapse
Don't worry asking questions is good as long as they are intelligent. You should flash CM3.4 and then the recovery image, as that is what i did. However, i don't think it really matters. To be safe, flash CM3.4 and then the recovery image.
And to your question pertaining to partitioning your SDcard, you can try MarcusMaximus' Apps2SD2 app which formats the card for you here
Unzip it to your sdcard and install it using ASTRO file manager or some other file manager.
If you have adb working,
Code:
adb install AppstoSD2.apk
if you have other questions you can always contact me on AIM- roflzbrianxdd
alritewhadeva said:
Don't worry asking questions is good as long as they are intelligent. You should flash CM3.4 and then the recovery image, as that is what i did. However, i don't think it really matters. To be safe, flash CM3.4 and then the recovery image.
And to your question pertaining to partitioning your SDcard, you can try MarcusMaximus' Apps2SD2 app which formats the card for you here
Unzip it to your sdcard and install it using ASTRO file manager or some other file manager.
If you have adb working,
Code:
adb install AppstoSD2.apk
if you have other questions you can always contact me on AIM- roflzbrianxdd
Click to expand...
Click to collapse
Thanks a ton, I'll get to this right after i finish this delicious sub! I'll also add you so I can IM if i have any more questions..
t3mp3st said:
Thanks a ton, I'll get to this right after i finish this delicious sub! I'll also add you so I can IM if i have any more questions..
Click to expand...
Click to collapse
Cool, Best of Luck with the flashing
alritewhadeva said:
no no no! just rename CM3.4 to update.zip, enter recovery (Home+power) wipe (alt+w) and flash (alt+s) after it says installation successful, reboot (Home+back)
you might also want to download his recovery image 1.2 like suggested in the posts above me
place the recovery image on your sdcard, do not rename it and do
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
Click to expand...
Click to collapse
Alright...I successfully partitioned my card, flashed with CM 3.4, but now when I try this instruction to install the new recovery, i get this error msg in Terminal:
error writing recovery: Permission denied
Any ideas?
You have to enter su before the code..
Code:
su
then
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
meoshe said:
You have to enter su before the code..
Code:
su
then
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
Click to expand...
Click to collapse
I did not enter the su, I will try that now thanks. In the mean time I also performed this step:
13. My /system/sd is read only and/or didn't upgrade to ext3!
Your filesystem is probably corrupt. Boot into recovery and open a console. Run "mount /system" then "/system/bin/e2fsck /dev/block/mmcblk0p2" and fix your filesystem. Reboot.
from: http://forum.xda-developers.com/showthread.php?t=518851
So I hope that didn't hurt anything...ill try with the su now. Thanks!
edit: out of curiosity, what does the "su" stand for? I feel if I know this it may help me to remember to enter it before any commands.
edit #2: does it stand for "Super User" to allow super user permissions? I gathered this after entering SU prompted me to allow superuser access
New recovery.img successfully installed! Thanks again to everyone that helped me with this.
I know I can transfer apps to SD easily from recovery now, but is there also a similar way to do it from the phone (or do they install to the SDcard by default now?)
Hey T3MP3ST... how did it go with upgrade to cm3.4
I had the same problem as you mentioned start of the post....
(stuck at g1, after partition).
this cm3.4 sounds like the solution for me to have apps2sd..
as it is in the ROM automatically, if i understood correctly.
dynamisoz said:
Hey T3MP3ST... how did it go with upgrade to cm3.4
I had the same problem as you mentioned start of the post....
(stuck at g1, after partition).
this cm3.4 sounds like the solution for me to have apps2sd..
as it is in the ROM automatically, if i understood correctly.
Click to expand...
Click to collapse
Hey there, with the help from everyone in this thread, along with the partitioning instructions using Ubuntu (if you still need to partition your card) from tubaking182 found here: http://forum.xda-developers.com/showthread.php?t=523648, It was great.
I just finished flashing with that ROM and then installing CM's recovery image (which is AWESOME...trackball selection, Apps2SD in one click)
I HIGHLY recommend it. If you have any problems, I'm sure you'll find most of the answers in this thread. If not, try PMing one of the helpful respondents, or I may be of SOME help with some minor questions or assurances.
This update.zip will flash clockwork recovery, overwriting the need/ability to use the stock recovery folder with command in it.
For advanced users only.
v.8 Download: http://www.mediafire.com/?dvleg4oatkfxm7w
The credit for this all goes to Bekit for the biggest step forward on the Gtablet, and obviously Koush for the custom recovery to begin with. Roebeet packaged this update.zip.
Instructions:
1) Unpack download to root of sdcard. (Internals /sdcard, NOT /sdcard2)
2) Start tablet while holding volume + and power. (Let go when you see text come up saying entering recovery)
3) You will see a short installation and it will reboot.
4) Check the install by powering off, the powering on with volume+ and power
5) You should be greeted by a menu with Clockworkmod at the top
i have been using clockwork on my gtablet for several days now. it backs up and restores just like i would expect it too.
well done as usual.. props for all involved.
Works great no problems at all !!!
wishlist:
1. add SDCARD2 to the mount and storage section.
2. ... wait that is it.!
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
rushless said:
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
Click to expand...
Click to collapse
thats how i did it
rushless said:
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
Click to expand...
Click to collapse
Or just extract the zip file supplied in the first post onto the sd card. Everything will go into its place. Then boot from recovery using power and volume+.
So, if I place the cwm update.zip and recovery folder in the root of sdcard (internal), then when I boot into recovery, CWM will show up instead? Just want to know if it really is that simple. Also, if I want to flash a new ROM (Like the zpad one), do I simply place the update.zip from that rom anywhere other than the root of "sdcard", and flash using CWM?
One last question, if I delete the CWM update.zip, is it like CWM was never placed on my g tab?
Am I the only one having trouble getting cwrecovery on the root of sd card? cant get this to run. i am a visual learner and reading how to do all this is helping me very little. if anyone would be willing to do a video or reference me to a link so i can learn to do all this, i would appreciate greatly. this is very frustrating tab stock!
hey this might help you get it installed..
plug your gtablet into your computer, then on the gtablet, click the "enable usb storage connection" button
then on your pc, open windows explorer, and open removeable drive F, the letter may be different for you.. it should show 13gb free on it, and there should be an android folder and a dcim folder.. that's the root of the storage inside the tablet.. it's the same as sdcard.. unzip the clockworkblahblah.zip to the root/top level directory of that removeable drive. then turn the tablet off. and then hold down the volume + button while powering it back on, it should install the clockworkmod recovery manager.. that's about it
jw52637 don't feel bad... I'm a visual learner as well.
uncola,
I followed your instructions and I saw the update install on boot up. Now I'm lost. I expected to see and application named ClockworkMod Recovery or something like that... but I did not. How do I know it is installed and how do I use it to back up my stock ROM? Also, do I remove the "update.zip" from the root directory or just leave it there?
Sorry for the questions but I want to learn how to do this so I can stop bothering you guys.
mmracing said:
jw52637 don't feel bad... I'm a visual learner as well.
uncola,
I followed your instructions and I saw the update install on boot up. Now I'm lost. I expected to see and application named ClockworkMod Recovery or something like that... but I did not. How do I know it is installed and how do I use it to back up my stock ROM? Also, do I remove the "update.zip" from the root directory or just leave it there?
Sorry for the questions but I want to learn how to do this so I can stop bothering you guys.
Click to expand...
Click to collapse
ClockWorkMod Recovery is the recovery system...so you have to boot your tab into recovery (hold volume + and power the tab up). If installed, you'll get the ClockWorkMod Recovery instead of the stock recovery system. You can make backups, do restores, install .zips, etc... from there.....then "reboot" the system to boot back to your normal system.
Thanks tcrews. I moved the update.zip from the root directory to a saved directory then rebooted holding the volume + key and it booted into ClockWorkMod Recovery. I chose back up and everything seemed to backup fine.
So if/when I install another ROM and I do a restore to the ROM I just backed up I should be right back to where I was at that time. I have used Titanium Backup to back up all my applications and settings and know I would have to restore them also.
I'm just wanting to understand how I can get back to "stock" so that I can get the automatic updates from Viewsonic.
Well i just tried it all again, and all worked very well. Thank you very much
Ok, I'm totaly new to this so please bare with me, having some troubles with my G tablet NOT booting so I cant access it through Windows to install CW to fix my tablet. How can I get the Files on the tablet? I can get it to attempt recovery but no luck. PLEASE help. I'm pulling my hair out here.
Anyone know how or am I sol and should try and sent it back?
maccaw1 said:
Anyone know how or am I sol and should try and sent it back?
Click to expand...
Click to collapse
There is a physical reset button inside the device, or you can try ADB.
I cant get the recovery image to find update.zip
I have clockwork recovery gtab-cwm-v08 installed and renamed to update.zip in the root of the internal sd but when i boot into recovery it goes to the android screen then shows a triangle with a exclamation point, then reboots normally!
I rooted with z4root 1.2.1
I have superuser permission so am rooted!
Unrooted then rooted again figuring this might help!
Tried a few different clockwork recoveries
have no idea what the problem is! if anyone has any clue it would be appreciated!
drumdumb said:
I cant get the recovery image to find update.zip
I have clockwork recovery gtab-cwm-v08 installed and renamed to update.zip in the root of the internal sd but when i boot into recovery it goes to the android screen then shows a triangle with a exclamation point, then reboots normally!
I rooted with z4root 1.2.1
I have superuser permission so am rooted!
Unrooted then rooted again figuring this might help!
Tried a few different clockwork recoveries
have no idea what the problem is! if anyone has any clue it would be appreciated!
Click to expand...
Click to collapse
Had that happen to me. What I did was run the CWM again into the gtab. Next reboot I had CWM insgtalled and working.
Hope that helps
CWM 0.8 is the one that I used and is working for me. I have the gTab w/the "original" partition scheme, and installed it by the original gTab update process.
If you're using newer CWMs I've read posts in the CM6b4 thread that newer CWM version seem to be causing problems for some people.
Also if you have a "newer" "batch" gTab w/a different partition map scheme you might want to check what the latest info is on the IRC channel, #tegratab on freenode IIRC. Might be quickest to ask for help there anyways, as it sounds like this probably isn't your problem.
What you did .. .. ..
Okay so you've rooted your newly bought MyTouch4G, and you've made sure that s=off and you've flashed Clockwork ROM manager's recovery image that you got from the market. That is all the correct order. But when you flashed a ROM you got stuck in a bootloop.
Am i screwed???
Don't worry you are just in a "soft brick mode", or "limp mode" if you will.
What happened? Why is it doing this?
The Image that you downloaded and installed 3.0.0.5 is for 2.3 (Gingerbread) based ROMs only. [n3rd note] these are ext4 style ROMS. They act and store information differently than 2.2 which are Ext3 ROMs[/n3rd note].
This could also be caused by trying to flash a 2.3 using a older 2.x.x.x version of the Recovery Image. Those will only support the Ext3 style ROMs, which are FroYo (2.2) based ROM.
Okay what do i need to do to fix it, there are two methods.
This is Method one it's the older version.
You must use this method if you do not have the engineering screen
If you are using the 3.0.0.5 Recovery image
To fix your problem you need to flash any 2.3 based ROM, for time sake i will recommend Cyanogen(mod). Link to Cyanogen(mod)'s CM7RC4. While you are there you need to also store the G/Apps.
If you are using the 2.x.x.x Recovery Image
To fix your problem you need to flash any 2.2 based ROM, for time sake i will recommend RoyalGlacier Thread can be found here
- Question: How do i find out what Recovery image i am using
- Answer: Boot the phone into the recovery mode. We'll touch on that in a little bit
Now when you download both of those files you also need to store them to SDCard.
NOTE: If you are using 2.x.x.x and going to flash RoyalGlacier you will not need the g/apps. They have included this in their ROM, and MAKE sure to follow their specific directions for installing the ROM.
- Question: Now how in the world i am going to do that since my phone is in bootloop.
Answer:
Two ways one can do that
1) use a SDcard reader and just plug the card into a main USB port.
2) Mount the SDCard in the phone via the Recovery Image. *** i'd recommend this method since you are going to need to be in recovery anyway ***
Pull the battery from the phone an put it back in, then put the back on the phone. turn the phone on holding the power button along with the volume down rocker button. That will boot the phone into the HBoot (Engineering) Screen. From there you will see an option that says "recovery" [this is what i mentioned earlier, about the different versions] use the volume rocker to select it, then tap the power button to select it. The phone will reboot into what is called the recovery image. From there you will select "mount" then USB. That will mount the SDCard to the Computer.
If you are using the 3.0.0.5 Recovery image
Once you have move Cyanogen(mod) and the g/apps to the SD card unmount the SDCard.
Then navigate to "wipe data/factory reset" you will want to wipe the phone. That will format everything to a fashion that can be written over w/o problems.
Then navigate to "install .zip from sdcard" > " choose .zip " > then flash the main Cyanogen(mod) ROM. Then do the same but flash the g/apps that you downloaded.
Once those are done you can re-boot the phone. That will boot you into cyanogen.
If you are using the 2.x.x.x Recovery image
Please use the link i supplied above to get that ROM up and running once it is done, according to their instructions come back here.
Now i understand that may or may not want Cyanogen nor RoyalGlacier on your phone. Well take care of that
What can i do to prevent this from Happening again?
Once you are up and running (make sure to log into your Google Account) go to the market and download Clockwork ROM manager again, and re-flash the recovery image.
Once you are done with that i HIGHLY suggest upgrading to the newest 3.0.0.6 Recovery image. You can do that one of two ways.
one way is to flash True_Blues method for installing 3.0.0.6 recovery image. Use this thread..
This is the way that i would personally recommend.
The second way is download the 3.0.0.6 recovery image, which i've attached and flash it via the ADB commands. If you want to do it this way you do not need to download Clockwork Rom Manager, you can "just flash it". If you need help with that, if you are using Windows or Mac, see my signature for True_Blue's method on EZ ADB. If you are using Unbutu 10.10 use this This Method to get ADB running. This is the method i used to ADB running on my Linux NetBook.
Download the file that i've attached and store just the recovery image from the .zip to the SDCard, from the ADB commands type
adb shell
su
flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
More information on this process can be found here
That will flash the newest recovery image to your phone
Once you have installed the 3.0.0.6 ROM Manager you can wipe and flash ANY MyTouch4G ROM that you want. It will handle both 2.2 (ext3) and 2.3 (ext4) ROM formats.
This is the New Method - Which is a little easier.
AND YOU MUST HAVE THE ENGINEERING HBOOT
Thanks to TeeJay for inspiring this.
I am going to assume that since you have the Engineering Screen you are more familiar with what you are doing so i'll be more to the point with this walk-through.
you will need to have ADB up and running for this method.
1) Download the attached file and store just the .img to your folder from which you preform all of your ADB commands
2) plug the phone into the computer
3) boot the phone into HBoot
4) from the ADB commands change the drive to the folder where you stored the recovery image.
5) type these commands
Code:
fastboot flash recovery recovery.img
the screen should say something to the degree of
Code:
sending 'recovery' (3426 KB)... OKAY [ 1.172s]
writing 'recovery'... OKAY [ 0.797s]
finished. total time: 1.969s
6) then select "bootloader"
7) navigate to "reboot recovery"
8) flash your ROM of choice.
9) enjoy your ROM of choice.
Please feel free to use this in your signature or link people back to. If you feel i made an error in this post please PM and i'll edit it accordingly.
If this thread has helped you solve your problem please hit the "thanks" button.
THE RECOVERY IMAGE HAS BEEN UPDATED TO THE NEWEST ONE.
good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.
leo221 said:
good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.
Click to expand...
Click to collapse
Added that method as well.
May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2
Thank you for this!! Exactly what I needed...!
austengeist said:
Thank you for this!! Exactly what I needed...!
Click to expand...
Click to collapse
Glad it helped, just make sure to hit the "Thanks" button in the first post.
dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.
option94 said:
May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2
Click to expand...
Click to collapse
Added.
aalsmadi1 said:
dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.
Click to expand...
Click to collapse
Well i work in the Imported Automotive parts. My job requires me to basically sit around and answer the phone when it rings. We have our own "call center" room. I just pick up the phone and answer question and sell parts. Like right now i'm working on a engine rebuild kit for a 1975 2Ton Mercedes Bens..... so i get some free time from time to time, and XDA is one of a few sites they allow me to visit.... BGR/ Android and Me, Android Central are the others....
I can see why some people blow up, spend +$200.00 on a phone then turn around and blow through something w/o taking the time to read something and then you get stuck in a bootloop.... i can see why people go bonkers. But slowing down and reading would solve alot of problems. Heck i've got 3 great threads in my signature that would solve alot question that one could have with a new device.
fixed my problem
Thread stuck.
Great guide!
Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?
DHSdrone said:
Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?
Click to expand...
Click to collapse
Meaning you want to run Cyanogen(mod)? Well jump over to their site and download the ROM of your picking; Nightlies are alpha builds, and the RC's are beta builds. I've ran both and both are extremely stable. I have links supplied in the first post. and directions for that matter. just make sure to do a nandroid backup before wiping and flashing.
Thanks ....Saved ME LIFE
Posting so I can see the "thanks" button. Doubley thanks you saved my bacon....err phone!! Hmmmm bacon!
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
Pull the battery. Hold vol down power on them restore cm7. Then flash cwm 3.0.0.6.
Sent from my Inspire 4G using XDA Premium App
b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
What button are you pressing to select the option? you should just use the trackpad.
Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!
b0rnsusp3ct said:
Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!
Click to expand...
Click to collapse
Why do you say that?
hi
I have a Nexus One on Official 2.3.4 update and i'm trying to root the phone, i'm having a hard time with the recovery image, I really like to know what i should do next.
1. read lots tutorials
2. Installed Android SDK and USB Driver for ADB thingy
3. downloaded and put fastboot in platform-tool and successfully unlocked bootloader
4. cannot get recovery to work, intended to install clockworkmod and RA one both give me the ! logo when i intend to boot in it
Questions
1. Should i downgrade first and then do this, if so, how does it work (if someone have a link to step by step tutorial)
2. Other methods
thanks a million
How are you trying to install recovery, and what errors/results are you seeing? Should be:
fastboot flash recovery name-of-recovery.img
How are you booting into recovery (if you reboot the phone, you will lose recovery)? Should be:
fastboot boot name-of-recovery.img
No need to downgrade. An unlocked bootloader is all you'll ever need...
danger-rat said:
How are you trying to install recovery, and what errors/results are you seeing? Should be:
fastboot flash recovery name-of-recovery.img
How are you booting into recovery (if you reboot the phone, you will lose recovery)? Should be:
fastboot boot name-of-recovery.img
No need to downgrade. An unlocked bootloader is all you'll ever need...
Click to expand...
Click to collapse
i install recovery that way yes, but i didn't boot that way, thanks i will try right now, will report back
EDIT - that works thanks so much, now i'm gonna attempt to root.
now i encounter another issue
so far i been following this guild http://forum.xda-developers.com/showthread.php?t=636795
and i cannot reboot to recovery after vol down+power menu.
do i just enter recovery with fastboot boot command and go from there?
what would be a better guild from this point on?
Place these two files on your sd card:
su zip: http://db.tt/BJudP0L
fix recovery zip: http://db.tt/ooDaCnU
Boot into recovery from the fastboot command, choose the flash zip from sd option, and flash the two files (one at a time). Done!
awesome, i had them installed. what's su and why is it recovery fix, if u don't mind can u explain these 2 files a little bit?
and what's next, do i just put the rom i'm flashing in the SD Card root and use recovery mode to install the zip?
going to use Cyanogen 7 for nexus one (update-cm-7.0.3-N1-signed.zip)
and also, what is this Google Add-on i read from the tutorial?
tripleccreation said:
awesome, i had them installed. what's su and why is it recovery fix, if u don't mind can u explain these 2 files a little bit?
and what's next, do i just put the rom i'm flashing in the SD Card root and use recovery mode to install the zip?
going to use Cyanogen 7 for nexus one (update-cm-7.0.3-N1-signed.zip)
and also, what is this Google Add-on i read from the tutorial?
Click to expand...
Click to collapse
su is short for superuser.. its basically using the root user account..
btw 7.1 RC is out if youre interested.. also take a look at the nightly releases
If you're going to install a custom rom like cm7 you do not have bother with the su part.
Put cm rom on the sd ( can be anywhere you just navigate to it) and the google addons (those or the gapps like the market etc.)
Flash custom recovery
Boot directly into the recovery (if you boot the os it overwrites the new recovery with the stock one)
Flash cm7
flash gapps.
reboot into cm7...
Your custom recovery will now stay there until you either flash a different one. Or flash a stock rom.
grimey01 said:
su is short for superuser.. its basically using the root user account..
btw 7.1 RC is out if youre interested.. also take a look at the nightly releases
Click to expand...
Click to collapse
should i just install the rom zip file in recovery mode? I'm not 100% sure what i'm suppose to do
albundy2010 said:
If you're going to install a custom rom like cm7 you do not have bother with the su part.
Put cm rom on the sd ( can be anywhere you just navigate to it) and the google addons (those or the gapps like the market etc.)
Flash custom recovery
Boot directly into the recovery (if you boot the os it overwrites the new recovery with the stock one)
Flash cm7
flash gapps.
reboot into cm7...
Your custom recovery will now stay there until you either flash a different one. Or flash a stock rom.
Click to expand...
Click to collapse
great, now u said flash cm7 do u mean "install zip file" but pick the cm7 file?
also, google add on, where should i acquire it?
also, for nightly release of cm (cm7.1 rc) for nexus one i should download the one called "passion" is that correcT?
http://download.cyanogenmod.com/?type=nightly
Also forgot to mention to do a wipe before you flash. That is also done in recovery.
gapps http://goo-inside.me/gapps/gapps-gb-20110613-signed.zip That is
In recovery you pick install zip file. You then browse to your cm7 rom.zip or any rom for the matter and install. Do the same for the gapps. Do the same for any other flashable zip like kernals etc.
Yes. Nightly/stable/RC's all have to passion (nexus 1)
Also for future reference post ?s in the Q and A section. A mod will probably move it there or delete this thread.
albundy2010 said:
Also for future reference post ?s in the Q and A section. A mod will probably move it there or delete this thread.
Click to expand...
Click to collapse
Great!
i will keep that in mind for sure.
Update: Method Works now i know how to flash and root nexus one, awesome guys thanks a million.
Conclusion and Steps I did (probably helpful to many people like me research tons different tutorials)
1. Download Android SDK and install it,
2. Find "Nexus One USB Driver" download and install it, now install bootloader (follow guide here, but only do up to the boot loader part http://forum.xda-developers.com/showthread.php?t=636795)
3. Find "fastboot" download and extract it to Android SDK installation folder (one called Platform-tools)
4. download a recovery img, i got clockwork 3.0.0.5.
5. download the su (super user) (i dunno if this is necessary but i did it anyway, links are in previous replies) and copy the zip file to ur sd card.
6. download the custom rom u want to use and copy to sd card as well (i use cyanogenmod 7.1 rc here)
7. download the google addon and copy the zip to the sd card as well (link provided in previous replies)
8. go to start and type cmd to load up command prompt in windows (i use windows 7)
9. get to c:\program files (x86)\android\android-sdk\platform-tools\ (i use windows 7 64bit, if it's 32bit system, no need for (x86))
10. hold trackball + power to enter bootloader and fastboot usb enable (should be automatic)
11. type fastboot flash recovery [recovery name.img] (in Windows Command Prompt)
12. type fastboot boot [recovery name.img] (in windows command prompt)
13. do a backup first, then wipe all data and cache, and then navigate to "install zip" and install su, recovery fix, custom rom, google addon, one by one b4 restart
14. after all done, restart, and that's it.
it works for me. but of course, i'm pretty noob, you are still taking ur own risk if u follow my experience..
Step 5 (recovery fix) is only necessary if you are sticking with a stock ROM. All it does is delete the two files that restore the stock recovery. These two files are only in the stock ROM, which is why you don't need to do this if you install a custom ROM...
Also, as started earlier, you can also skip the su zip if you plan on installing a custom ROM...
the story goes like this, I flash TWRP 2.2.0 did a nandroid and deleted all the necessary partitions to install the new rom, I put the rom in the SD card, TWRP is not mounting the sd card wich happens to work flawlessly in my phone, and pc, now i cant access the internal storage nor the sdcard, Please I dont know what to do anymore i cant get my cpuid because my tablet does not have an os so i cant select usb debugging, i cant access my internal storage either from the pc, im using skrilax-oz bootloader v7, the computer only recognizes the tablet in fastboot, how can i put a recovery in it via the bootloader in fastboot if posible.
If your PC will recognize Fastboot (you should have it listed in Device manager when you go to fastboot with Skirlaz Bootloader), then the easiest thing would be to get the proper recovery .img file. I suggest EZTerry Public revovery, or CWM. Most recent versions of both. Your choice. You can find CWM recovery image at tegraowners, or get the Public Recovery from the XDA Dev forum.
Boot your tab to fastboot.
Make sure the xxxxxxxxrecovery.img file is in the same folder as your Android/Android-sdk/Platform-tools folder. (has to be in the same folder as fastboot.exe)
Then open a Command window in that folder
Type fastboot flash recovery xxxxxxxrecovery.img
Then hit enter
Remember, where xxxxxxxrecovery,img is the name of the recovery image.
This should hook you up.
TWRP has some issues,
MD
cubanghost said:
the story goes like this, I flash TWRP 2.2.0 did a nandroid and deleted all the necessary partitions to install the new rom, I put the rom in the SD card, TWRP is not mounting the sd card wich happens to work flawlessly in my phone, and pc, now i cant access the internal storage nor the sdcard, Please I dont know what to do anymore i cant get my cpuid because my tablet does not have an os so i cant select usb debugging, i cant access my internal storage either from the pc, im using skrilax-oz bootloader v7, the computer only recognizes the tablet in fastboot, how can i put a recovery in it via the bootloader in fastboot if posible.
Click to expand...
Click to collapse
Can you still go into recovery by power+volume down? If yes, then go back into trwp recovery and do the following. Mount option >click mount sd card and using external sd. Once you have those options clicked, go back to install option. There you will be able to access your external sd card. I think the best recovery to use now is thor 1.7.3.
Good luck,
Sent from my A500 using Tapatalk 2
10507 said:
Can you still go into recovery by power+volume down? If yes, then go back into trwp recovery and do the following. Mount option >click mount sd card and using external sd. Once you have those options clicked, go back to install option. There you will be able to access your external sd card. I think the best recovery to use now is thor 1.7.3.
Good luck,
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
it wont mount, that is why im having such a big issue trying to install a new recovery or flash the rom in the external sd card.
Ok, you have 2 different threads going. In this thread, you didn't mention anything about formatting your internal storage. This is why XDA has a rule about posting the same thing in multiple forums. Chances are you say something in one, and not the other. And what you will get is sometimes not good info, or even worse, no response.
Dees-troy and I have posted possible solutions. Problem is, other people get confused when they see it.
That little bit of missing info between the multiple posts can mean a big thing.
I will let it slide this time. Next time, I will delete one or the other.
MD
cubanghost said:
it wont mount, that is why im having such a big issue trying to install a new recovery or flash the rom in the external sd card.
Click to expand...
Click to collapse
Did you fastboot a new recovery image like I directed?
MD
Moscow Desire said:
If your PC will recognize Fastboot (you should have it listed in Device manager when you go to fastboot with Skirlaz Bootloader), then the easiest thing would be to get the proper recovery .img file. I suggest EZTerry Public revovery, or CWM. Most recent versions of both. Your choice. You can find CWM recovery image at tegraowners, or get the Public Recovery from the XDA Dev forum.
Boot your tab to fastboot.
Make sure the xxxxxxxxrecovery.img file is in the same folder as your Android/Android-sdk/Platform-tools folder. (has to be in the same folder as fastboot.exe)
Then open a Command window in that folder
Type fastboot flash recovery xxxxxxxrecovery.img
Then hit enter
Remember, where xxxxxxxrecovery,img is the name of the recovery image.
This should hook you up.
TWRP has some issues,
MD
Click to expand...
Click to collapse
Thank you, thank you thankyou, you have no idea the headhache you have saved me, I'm very greatfull for your help, it work like a charm, no more TWRP recovery for me.
cubanghost said:
Thank you, thank you thankyou, you have no idea the headhache you have saved me, I'm very greatfull for your help, it work like a charm, no more TWRP recovery for me.
Click to expand...
Click to collapse
Hey, don't forget the THANKS Button
MD
cubanghost said:
Thank you, thank you thankyou, you have no idea the headhache you have saved me, I'm very greatfull for your help, it work like a charm, no more TWRP recovery for me.
Click to expand...
Click to collapse
TWRP is a good recovery. And it works for most. As with most recovery systems, it will have times when things don't work correctly. Call it a "hic-cup". And the only thing to do, is totally install something else. Works most of the time.
Dees Troy is a darn good Dev. And we're grateful to have him around. In this case, you had to do something radical to shock the system. Works every time
Also, throw a Thanks to Skirlax_CZ for the bootloader and the fastboot capability. If you didn't have that, your "stuff would be hanging in the breeze" about now.
MD
Moscow Desire said:
TWRP is a good recovery. And it works for most. As with most recovery systems, it will have times when things don't work correctly. Call it a "hic-cup". And the only thing to do, is totally install something else. Works most of the time.
Dees Troy is a darn good Dev. And we're grateful to have him around. In this case, you had to do something radical to shock the system. Works every time
Also, throw a Thanks to Skirlax_CZ for the bootloader and the fastboot capability. If you didn't have that, your "stuff would be hanging in the breeze" about now.
MD[/QUOTE
most defenatly im greatful for Skirlax and his boot loader it totaly saved me. and TWRP i use it on my skyrocket and works very well, thus why i flash it with out looking for the thread.
Click to expand...
Click to collapse