phone renicing script - XPERIA X10 General

here's a script that uses the busybox renicing commands to periodically boost the priority of various processes like the phone (to ensure that the delay in ringing is minimum ) and home screen (greater responsiveness hopefully) , you can use it in custom roms by just putting it in the init.d folder (if rom is desined to run scripts in the folder [conact your rom architect] ) .The commands have been modified for sony ericsson phones running the sony ericsson launcher , i had found an older xda forum that had an app that would periodically run scripts , to do a similar thing .
I think this method is lighter .
While this has nothing to with the oom values that the v6 supercharger expertly manages , it only increases the tasks priority .
If init.d isn't run on your rom you can use rom manager to run at boot
this is my first attempt at scripting , so am not responsible for any damages , but i would like your comments
ps wolfbreak your earlier rom had a similar thing in the build.prop file , but instead of using a fixed time it would run if the priority fell before threshold , am not sure of the exact command , so was wondering if you or anyone else could help me because that is way more elegant , i couldnt find it in your latest release though
pps you might have to rename the script to renicer.sh
enjoy

i think i set the priority of the google apps a little too high , will others tell me if they have a problem using standard apps like gmail etc

version 2
View attachment 70prioritizer.txt
this script is buggy if anybod can tell me whatswrong i will be thankful

nikhilshivpuja said:
View attachment 744284
this script is buggy if anybod can tell me whatswrong i will be thankful
Click to expand...
Click to collapse
I believe you set media process to high will be better if you set something like this
com.android.phone=-16
com.android.mms=-16
android.process.acore=-14
com.android.systemui=-15
android.process.media=5
system=-19
your launcher=-5

Code:
#!/system/bin/sh
#
# Znuff's proritizing script
#
# A list of priority as. Separate process names by spaces.
# Priority -18
PHONEAPP="com.android.phone"
# Priority -17
LAUNCHERAPP="com.sonyericsson.home com.android.systemui"
# Priority -16
DIALERAPP="android.process.acore"
# Priority -13
PRIO13="android.process.media mediaserver com.jb.gokeyboard"
# Priority -5
PRIO5="com.jb.gosms"
# Priority 10
PRIO10="com.google.process.gas com.google.android.as.uploader"
# Let's put our APK installer to a really low priority, so it doesn't slow down the whole system when it installs apps
# Priority 15
PRIO25="installd"
# Infinite loop
while [ 1 ]; do
/system/xbin/echo "Checking for -18"
# Priority -18
for a in $PHONEAPP; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice -18 $p;
if [ -d /proc/$p ]; then
# not a typo!
# -17 means that the OOM killer will _NEVER_ kill this app!
/system/xbin/echo "-17" > /proc/$p/oom_adj
fi
done
done
# Priority -17
for a in $LAUNCHERAPP; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice -17 $p;
if [ -d /proc/$p ]; then
# not a typo!
# -17 means that the OOM killer will _NEVER_ kill this app!
/system/xbin/echo "-17" > /proc/$p/oom_adj
fi
done
done
# Priority -16
for a in $DIALERAPP; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice -16 $p;
if [ -d /proc/$p ]; then
# not a typo!
# -17 means that the OOM killer will _NEVER_ kill this app!
/system/xbin/echo "-17" > /proc/$p/oom_adj
fi
done
done
# Priority -13
for a in $PRIO13; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice -13 $p;
# if [ -d /proc/$p ]; then
# /system/xbin/echo "-13" > /proc/$p/oom_adj
# fi
done
done
# Priority -5
for a in $PRIO5; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice -5 $p;
# if [ -d /proc/$p ]; then
# /system/xbin/echo "-5" > /proc/$p/oom_adj
# fi
done
done
# Priority 10
for a in $PRIO10; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice 10 $p;
# if [ -d /proc/$p ]; then
# /system/xbin/echo "10" > /proc/$p/oom_adj
# fi
done
done
# Priority 15
for a in $PRIO10; do
for p in $(pidof $a); do
# /system/xbin/echo "Renicing $a with pid $p"
/system/bin/renice 15 $p;
# if [ -d /proc/$p ]; then
# /system/xbin/echo "15" > /proc/$p/oom_adj
# fi
done
done
# sleep for 2 seconds, then repeat
sleep 5
done
Done for me for another device. Keep in mind you can't run this in a init.d script (the script needs to exit for init to continue, but if you run it in a infinite loop, it never exits!).
oom config is partly disabled, as you can see from the code

Related

[DEV/TOOL] Automated(ish) T-Mobile Theme Generator

A script I've been working on for a couple of days. Still a work in progress so if you suck less, I could use improvements. It's real simple:
** Put this script in a stock theme template like Cyanbread
1.) Place a source ROM you want to theme for, the base ROM/THROM you're taking images from and a stock theme template (like Cyanbread) and set them in the script at the top.
2.) Modify the script as needed (it's not done as of this writing) and set verbosity out the output, etc.
2.) Run the script and it will do the work
The code should be pretty self explanatory and I'll update it as I go. Just about finished at this point.
Screenshot shows you what it does
Code:
#!/bin/bash
# ------------------------- Set theme name TODO
# themeName=$(cat Android.mk | grep LOCAL_PACKAGE_NAME | sed 's/^LOCAL_PACKAGE_NAME\s:=\s//g')
# read -p "Enter theme name. Enter for default [$themeName]: " REPLY
# REPLY=${REPLY:-$themeName}
# echo "Theme name is $themeName"
# ------------------------- for testing to spare the parameters
SRCROM="ABSOLUTE/PATH/TO/ROOT/OF/SOURCEROM"
BASEROM="ABSOLUTE/PATH/TO/ROOT/OF/BASEROM/YOURE/THEMING/FOR"
# my example:
# SRCROM=~/GBSense2.1/
# BASEROM=~/cm_glacier_full-42/
# running this script from ~/haxzamatic-Templatebread--918313e/
DSTROM=$(pwd)
LOGFILE=$DSTROM/logfile.log
decompile_rom(){
cd $1/app
if [ ! -d $1/app/Browser/ ]; then # need apktool for drawables
#apktool if framework/framework_res.apk
#if [ -e framework/com.htc.resources.apk ]; then
# apktool if framework/com.htc.resources.apk
#fi
for i in `ls $1/app/*.apk`; do echo "Decompiling $i"; apktool d $i; done
cd ../framework
for i in `ls $1/framework/*.apk`; do echo "Decompiling $i"; apktool d $i; done
else
echo "Already decompiled"
fi
}
decompile_rom $SRCROM/system
decompile_rom $BASEROM/system
cd $DSTROM
rm $DSTROM/res/xml/*.xml
echo "" > appendleftovers.tmp
# ------------------------- Log file purge and title
cat <<EOF > $LOGFILE
*********************************************************
Missing files from $SRCROM
*********************************************************
EOF
# ------------------------- Redirections.xml
cat <<EOF > res/xml/redirections.xml
<?xml version="1.0" encoding="utf-8"?>
<theme-redirections
xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:pluto="http://www.w3.org/2001/pluto.html">
EOF
# ------------------------- Android.xml
echo "<resource-redirections>">$DSTROM/res/xml/android.xml
# ------------------------- Main Loop
find "$BASEROM" -type f -name "*.png" | while read fimg; do
# ------------------------- Base Params
FIMGFNAME=$(cat $(dirname $fimg)"/../../apktool.yml" | grep "apkFileName" | sed 's/apkFileName:\s//g' | sed 's/\.apk//g' )
FIMGPNAME=$(cat $(dirname $fimg)"/../../AndroidManifest.xml" | grep "package" | tr " " "\n" | grep package= | cut -d \" -f 2)
if [ $FIMGPNAME = "android" ]; then FIMGPNAME=framework_res; fi
FIMGDNAME=$(echo $(dirname $fimg) | sed "s/\(.*\)\///" )
cd $DSTROM
if [ "$FIMGFNAME" = "framework-res" ] || [ "$FIMGFNAME" = "com.htc.resources" ]; then wp="framework"
else wp="app"
fi
# -------------------------
SRCFILEPATH=$SRCROM/system/$wp/$FIMGFNAME/res/$FIMGDNAME/$DESTFILE
SRCFILENAME=$(echo $(basename $fimg))
DSTFILEPATH=$DSTROM/system/$wp/$FIMGFNAME/res/$FIMGDNAME/$DESTFILE
DSTFILENAME=$(echo $(echo $FIMGPNAME|sed 's/\./_/g')"_$(basename $fimg)")
BSEFILEPATH=$BASEROM/system/$wp/$FIMGFNAME/res/$FIMGDNAME/$DESTFILE
BSEFILENAME=$(echo $(basename $fimg))
# -------------------------
[ -d res ] || mkdir res
[ -d res/$FIMGDNAME ] || mkdir res/$FIMGDNAME
# -------------------------
if [ -f $SRCFILEPATH$SRCFILENAME ]; then
echo "cp $SRCFILEPATH$SRCFILENAME $DSTROM/res/$FIMGDNAME/$DSTFILENAME"
cp $SRCFILEPATH$SRCFILENAME $DSTROM/res/$FIMGDNAME/$DSTFILENAME
# ------------------------- Redirections.xml
thispname=$(cat $(dirname $fimg)"/../../AndroidManifest.xml" | grep "package" | tr " " "\n" | grep package= | cut -d \" -f 2)
if ! grep -iq $thispname $DSTROM/res/xml/redirections.xml ; then
echo "<package-redirections android:name=\"$thispname\" android:minSdkVersion=\"7\" android:resource=\"@xml/$(echo $thispname|sed 's/\./_/g')\" />" >>$DSTROM/res/xml/redirections.xml
fi
# ------------------------- Android.xml
drawrsrc=$(echo $SRCFILENAME | sed 's/\(.*\)\..*/\1/' | sed 's/\.9//g')
drawrdst=$(echo $DSTFILENAME | sed 's/\(.*\)\..*/\1/' | sed 's/\.9//g')
echo "<item name=\"@drawable/$drawrsrc\">@drawable/$drawrdst</item>" >>$DSTROM/res/xml/android.xml
# ------------------------- Package Redirections
drawrfnamenoext=$(echo $drawrsrc | sed 's/\./_/g')
dstfilenameparsed=$(echo $drawrdst | sed 's/\./_/g')
dstredirfname=`echo "$DSTROM/res/xml/$(echo $FIMGPNAME | sed 's/\./_/g').xml"`
if [ ! -f $dstredirfname ]; then
cat <<EOF > $dstredirfname
<?xml version="1.0" encoding="utf-8"?>
<resource-redirections>
EOF
echo "$dstredirfname" >> appendleftovers.tmp
fi
echo "<item name=\"drawable/$drawrfnamenoext\">@drawable/$dstfilenameparsed</item>" >>$dstredirfname
else
echo "[MISSING]: $SRCFILEPATH$SRCFILENAME" >> $LOGFILE
#echo "1.) $fimg" >> $LOGFILE
#echo "2.) $FIMGFNAME" >> $LOGFILE
#echo "3.) $FIMGPNAME" >> $LOGFILE
#echo "4.) $FIMGDNAME" >> $LOGFILE
#echo "5.) $SRCFILEPATH" >> $LOGFILE
#echo "6.) $SRCFILENAME" >> $LOGFILE
#echo "7.) $DSTFILEPATH" >> $LOGFILE
#echo "8.) $DSTFILENAME" >> $LOGFILE
#echo "9.) $BSEFILEPATH" >> $LOGFILE
#echo "10.)$BSEFILENAME" >> $LOGFILE
#echo "------------------------------" >> $LOGFILE
fi
# echo "1.) $fimg"
# echo "2.) $FIMGFNAME"
# echo "3.) $FIMGPNAME"
# echo "4.) $FIMGDNAME"
# echo "5.) $SRCFILEPATH"
# echo "6.) $SRCFILENAME"
# echo "7.) $DSTFILEPATH"
# echo "8.) $DSTFILENAME"
# echo "9.) $BSEFILEPATH"
# echo "10.)$BSEFILENAME"
# echo "------------------------------"
# ------------------------- Example output:
# 1.) ~/cm_glacier_full-42/system/app/Browser/res/drawable-hdpi/fav_icn_background.png
# 2.) Browser
# 3.) com.android.browser
# 4.) drawable-hdpi
# 5.) ~/GBSense2.1/system/app/Browser/res/drawable-hdpi/
# 6.) fav_icn_background.png
# 7.) ~/haxzamatic-Templatebread--918313e/system/app/Browser/res/drawable-hdpi/
# 8.) com_android_browser_fav_icn_background.png
# 9.) ~/cm_glacier_full-42/system/app/Browser/res/drawable-hdpi/
# 10.)fav_icn_background.png
done
# ------------------------- Close out the XML tags
echo "</resource-redirections>">>$DSTROM/res/xml/android.xml
echo "</theme-redirections>">>$DSTROM/res/xml/redirections.xml
cat $DSTROM/appendleftovers.tmp | while read thistmp; do
echo "</resource-redirections>" >> $thistmp
done
rm $DSTROM/appendleftovers.tmp
echo "FINISHED:::::::::::::::::::::::::::::::::::::::::::::::::::::::"
reserved for spam

Universal Script for Android Phone

Create 00tweaks and put all the codes inside 00tweaks then put the file to system/etc/init.d
This universal script boost RAM performance.
This universal script mounts all partition as NOATIME
This universal script lessen lags on selected applications (MMS / Handcent / DialerOne)
This universal script enhances deadline scheduler
This universal script performs background process to check screen state
Click to expand...
Click to collapse
Code:
#!/system/bin/sh
#remounting the file systems with noatime and nodiratime flags to save battery and CPU cycles
for k in $(busybox mount | grep relatime | cut -d " " -f3)
do
sync
busybox mount -o remount,noatime,nodiratime $k
done
#if mounting is not successful then manual mounting will do the thing for you
mount -o remount,noatime,nodiratime auto /
mount -o remount,noatime,nodiratime auto /dev
mount -o remount,noatime,nodiratime auto /proc
mount -o remount,noatime,nodiratime auto /sys
mount -o remount,noatime,nodiratime auto /mnt/asec
mount -o remount,noatime,nodiratime auto /system
mount -o remount,noatime,nodiratime auto /data
mount -o remount,noatime,nodiratime auto /cache
mount -o remount,noatime,nodiratime auto /mnt/sdcard
mount -o remount,noatime,nodiratime auto /mnt/secure/asec
mount -o remount,noatime,nodiratime auto /mnt/sdcard/.android_secure
#flags every mounted partition as non rotational and increases it's cache size for more read speed
MTD=`ls -d /sys/block/mtd*`;
LOOP=`ls -d /sys/block/loop*`;
RAM=`ls -d /sys/block/ram*`;
MMC=`ls -d /sys/block/mmc*`;
for j in $MTD $LOOP $RAM
do
echo "0" > $j/queue/rotational;
echo "4096" > $j/queue/read_ahead_kb;
done
echo "4096" > /sys/devices/virtual/bdi/179:0/read_ahead_kb;
for a in $MTD $MMC
do
echo "512" > $a/queue/nr_requests;
done
#internet speed tweaks
echo 0 > /proc/sys/net/ipv4/tcp_timestamps;
echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse;
echo 1 > /proc/sys/net/ipv4/tcp_sack;
echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle;
echo 1 > /proc/sys/net/ipv4/tcp_window_scaling;
echo 5 > /proc/sys/net/ipv4/tcp_keepalive_probes;
echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl;
echo 30 > /proc/sys/net/ipv4/tcp_fin_timeout;
echo 404480 > /proc/sys/net/core/wmem_max;
echo 404480 > /proc/sys/net/core/rmem_max;
echo 256960 > /proc/sys/net/core/rmem_default;
echo 256960 > /proc/sys/net/core/wmem_default;
echo 4096 16384 404480 > /proc/sys/net/ipv4/tcp_wmem;
echo 4096 87380 404480 > /proc/sys/net/ipv4/tcp_rmem;
#vm management tweaks
echo "0" > /proc/sys/vm/swappiness;
echo "95" > /proc/sys/vm/dirty_ratio;
echo "10" > /proc/sys/vm/vfs_cache_pressure;
echo "20480" > /proc/sys/vm/min_free_kbytes;
echo "1" > /proc/sys/vm/oom_kill_allocating_task;
echo "0" > /proc/sys/vm/laptop_mode;
echo "60000" > /proc/sys/vm/dirty_expire_centisecs;
echo "60" > /proc/sys/vm/dirty_background_ratio;
echo "6000" > /proc/sys/vm/dirty_writeback_centisecs;
echo "3" > /proc/sys/vm/drop_caches;
#kernel tweaks
echo "8" > /proc/sys/vm/page-cluster;
echo "64000" > /proc/sys/kernel/msgmni;
echo "64000" > /proc/sys/kernel/msgmax;
echo "10" > /proc/sys/fs/lease-break-time;
echo 500 512000 64 2048 > /proc/sys/kernel/sem;
# use deadline scheduler
echo deadline > /sys/class/block/mmcblk0/queue/scheduler;
echo deadline > /sys/class/block/stl14/queue/scheduler;
echo deadline > /sys/class/block/stl13/queue/scheduler;
echo deadline > /sys/class/block/stl12/queue/scheduler;
echo 8 > /sys/class/block/mmcblk0/queue/iosched/fifo_batch;
echo 8 > /sys/class/block/stl14/queue/iosched/fifo_batch;
echo 8 > /sys/class/block/stl13/queue/iosched/fifo_batch;
echo 8 > /sys/class/block/stl12/queue/iosched/fifo_batch;
echo 400 > /sys/class/block/mmcblk0/queue/iosched/read_expire;
echo 400 > /sys/class/block/stl14/queue/iosched/read_expire;
echo 400 > /sys/class/block/stl13/queue/iosched/read_expire;
echo 400 > /sys/class/block/stl12/queue/iosched/read_expire;
echo 4 > /sys/class/block/mmcblk0/queue/iosched/writes_starved;
echo 4 > /sys/class/block/stl14/queue/iosched/writes_starved;
echo 4 > /sys/class/block/stl13/queue/iosched/writes_starved;
echo 4 > /sys/class/block/stl12/queue/iosched/writes_starved;
#setprop
setprop wifi.supplicant_scan_interval 600;
setprop windowsmgr.max_events_per_sec 260;
setprop ro.lge.proximity.delay 25;
setprop mot.proximity.delay 75;
setprop net.tcp.buffersize.default 4096,87380,256960,4096,16384,256960;
setprop net.tcp.buffersize.wifi 4096,87380,256960,4096,16384,256960;
setprop net.tcp.buffersize.umts 4096,87380,256960,4096,16384,256960;
setprop ro.HOME_APP_ADJ 1;
setprop ro.mot.eri.losalert.delay 1000;
setprop video.accelerate.hw 1;
setprop ro.ril.disable.power.collapse 0;
setprop pm.sleep_mode 1;
setprop media.stagefright.enable-player true;
#lowmemory
FOREGROUND_APP_MEM="2560";
VISIBLE_APP_MEM="4096";
SECONDARY_SERVER_MEM="6144";
HIDDEN_APP_MEM="17408";
CONTENT_PROVIDER_MEM="19456";
EMPTY_APP_MEM="23552";
#governor scaling awake
GOVERNOR_SCALE="ondemand";
GOVERNOR_FREQENCY_MAX="800000";
GOVERNOR_FREQENCY_MIN="245760";
SAMPLING_RATE="50000";
FREQ_STEP="40";
UP_THRESHOLD="90";
DOWN_THRESHOLD="20";
#governor scaling sleep
SLEEP_SCALE="ondemand";
SLEEP_FREQENCY_MAX="480000";
SLEEP_FREQENCY_MIN="245760";
XSAMPLING_RATE="100000";
XFREQ_STEP="15";
XUP_THRESHOLD="90";
XDOWN_THRESHOLD="20";
#locking app
LOCK_APP_IN_MEMORY_ENABLED="0"
LOCK_APP_SU="1"
LOCK_APP_DIALER="0"
LOCK_APP_MMS="0"
LOCK_APP_HANDCENT="0"
# =========
# remove lag when answering phone calls
# =========
MAX_PHONE()
{
pidphone=`pidof com.android.phone`;
if [ $pidphone ];
then
/system/xbin/echo "-17" > /proc/$pidphone/oom_adj;
renice -20 $pidphone;
if [ $MAX_APP -eq "1" ];
then
exit;
else
MAX_APP_STARTER;
MAX_APP=1;
exit;
fi;
else
sleep 3;
MAX_PHONE;
fi;
}
# =========
# remove lag from su (root)
# =========
MAX_SU()
{
pidsu=`pidof com.noshufou.android.su`;
if [ $pidsu ];
then
/system/xbin/echo "-17" > /proc/$pidsu/oom_adj;
renice -20 $pidsu;
exit;
else
sleep 3;
MAX_SU;
fi;
}
# =========
# remove lag from Clock
# =========
MAX_DIALER()
{
piddialer=`pidof kz.mek.DialerOne`;
if [ $piddialer ];
then
/system/xbin/echo "-17" > /proc/$piddialer/oom_adj;
renice -10 $piddialer;
exit;
else
sleep 3;
MAX_DIALER;
fi;
}
# =========
# remove lag from MMS
# =========
MAX_MMS()
{
pidmms=`pidof com.android.mms`;
if [ $pidmms ];
then
/system/xbin/echo "-17" > /proc/$pidmms/oom_adj;
renice -10 $pidmms;
exit;
else
sleep 3;
MAX_MMS;
fi;
}
# =========
# remove lag from HANDCENT
# =========
MAX_HANDCENT()
{
pidhandcent=`pidof com.handcent.nextsms`;
if [ $pidhandcent ];
then
/system/xbin/echo "-17" > /proc/$pidhandcent/oom_adj;
renice -10 $pidhandcent;
exit;
else
sleep 3;
MAX_HANDCENT;
fi;
}
# =========
# Background process to optimize process
# =========
MAX_APP_STARTER()
{
if [ $LOCK_APP_IN_MEMORY_ENABLED -eq "1" ];
then
if [ $LOCK_APP_SU -eq "1" ];
then
(while [ 1 ];
do
sleep 5;
MAX_SU;
done &);
fi;
if [ $LOCK_APP_MMS -eq "1" ];
then
(while [ 1 ];
do
sleep 3;
MAX_MMS;
done &);
fi;
if [ $LOCK_APP_HANDCENT -eq "1" ];
then
(while [ 1 ];
do
sleep 3;
MAX_HANDCENT;
done &);
fi;
if [ $LOCK_APP_DIALER -eq "1" ];
then
(while [ 1 ];
do
sleep 3;
MAX_DIALER;
done &);
fi;
exit;
else
(while [ 1 ];
do
sleep 3;
MAX_APP_STARTER;
done &);
fi;
}
if [ $LOCK_APP_IN_MEMORY_ENABLED -eq "1" ];
then
(while [ 1 ];
do
sleep 3;
MAX_PHONE;
done &);
fi;
GOV_MODE()
{
echo "1" >/proc/sys/vm/overcommit_memory;
echo "4" > /proc/sys/vm/min_free_order_shift;
echo $FOREGROUND_APP_MEM,$VISIBLE_APP_MEM,$SECONDARY_SERVER_MEM,$HIDDEN_APP_MEM,$CONTENT_PROVIDER_MEM,$EMPTY_APP_MEM > /sys/module/lowmemorykiller/parameters/minfree;
echo $GOVERNOR_SCALE > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
echo $GOVERNOR_FREQENCY_MAX > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq;
echo $GOVERNOR_FREQENCY_MIN > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq;
echo $SAMPLING_RATE > /sys/devices/system/cpu/cpu0/cpufreq/$GOVERNOR_SCALE/sampling_rate;
echo $FREQ_STEP > /sys/devices/system/cpu/cpu0/cpufreq/$GOVERNOR_SCALE/freq_step;
echo $UP_THRESHOLD > /sys/devices/system/cpu/cpu0/cpufreq/$GOVERNOR_SCALE/up_threshold;
echo $DOWN_THRESHOLD > /sys/devices/system/cpu/cpu0/cpufreq/$GOVERNOR_SCALE/down_threshold;
}
SLEEP_MODE()
{
echo "1" >/proc/sys/vm/overcommit_memory;
echo "4" > /proc/sys/vm/min_free_order_shift;
echo $FOREGROUND_APP_MEM,$VISIBLE_APP_MEM,$SECONDARY_SERVER_MEM,$HIDDEN_APP_MEM,$CONTENT_PROVIDER_MEM,$EMPTY_APP_MEM > /sys/module/lowmemorykiller/parameters/minfree;
echo $SLEEP_SCALE > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
echo $SLEEP_FREQENCY_MAX > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq;
echo $SLEEP_FREQENCY_MIN > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq;
echo $XSAMPLING_RATE > /sys/devices/system/cpu/cpu0/cpufreq/$SLEEP_SCALE/sampling_rate;
echo $XFREQ_STEP > /sys/devices/system/cpu/cpu0/cpufreq/$SLEEP_SCALE/freq_step;
echo $XUP_THRESHOLD > /sys/devices/system/cpu/cpu0/cpufreq/$SLEEP_SCALE/up_threshold;
echo $XDOWN_THRESHOLD > /sys/devices/system/cpu/cpu0/cpufreq/$SLEEP_SCALE/down_threshold;
}
# =========
# Background process to check screen state
# =========
(while [ 1 ];
do
STATE=`cat /sys/power/wait_for_fb_wake`;
GOV_MODE;
sleep 3;
STATE=`cat /sys/power/wait_for_fb_sleep`;
SLEEP_MODE;
sleep 3;
done &);
Some brief explanation for the contents of the script
1. /proc/sys/vm/laptop_mode
How many seconds after a read should a writeout of changed files start (this is based on the assumption that a read will cause an otherwise spun down disk to spin up again).
2. /proc/sys/vm/dirty_writeba​ck_centisecs
How often the kernel should check if there is "dirty" (changed) data to write out to disk (in centiseconds).
3./proc/sys/vm/dirty_expir​e_centisecs
How old "dirty" data should be before the kernel considers it old enough to be written to disk. It is in general a good idea to set this to the same value as dirty_writeback_centisecs above.
4./proc/sys/vm/dirty_ratio​
The maximum amount of memory (in percent) to be used to store dirty data before the process that generates the data will be forced to write it out. Setting this to a high value should not be a problem as writeouts will also occur if the system is low on memory.
5./proc/sys/vm/dirty_backg​round_ratio
The lower amount of memory (in percent) where a writeout of dirty data to disk is allowed to stop. This should be quite a bit lower than the above dirty_ratio to allow the kernel to write out chunks of dirty data in one go.
I thought I should return the Tweak Manager's 00tweaks script back to initramfs
let me give it a try
what if i already have 00tweaks? should i had this script to the current file or substitute?
Hey, the values are similar to CF-Root Great then, gonna try it out
What should I do if I want to try your script, but I have already used CF-Root With Tweak Manager that also using another script in 00tweaks file
Wow I just ran this on GSB 3.8 workshed for the eris. And WOW the phone rings on 1 1/2 rings with a ringtone and the screen lights up. Very nice work. I hope you don't mind but i posted a link from the eris fourms to this file. I been looking for for so long on how to get rid of the rintone LAG and WOW i think you got it! Thank you
How to create the script?
Thnx
A lil question, this wont collide with the V6 Supercharger?
Hey guys,
can somebody please tell me how to make a script of this? I really want to know, but i'm new to this.
I can't find anything on the "search".
Cheers
QNBT said:
A lil question, this wont collide with the V6 Supercharger?
Click to expand...
Click to collapse
I think something does because I am getting complete homescreen redraws since I started using this a couple days ago. The phone seems to boot way faster and seems to run a little better but I think there is a conflict somewhere.
Sgace said:
Hey guys,
can somebody please tell me how to make a script of this? I really want to know, but i'm new to this.
I can't find anything on the "search".
Cheers
Click to expand...
Click to collapse
You don't have to make a script just copy it all to a text document on your desktop and after you save it delete the .txt at the end. Then put it on your SD card and use Root Explorer, or similar, to move it the proper location. I set the ownership and permissions the same as other files in the same location and rebooted. Just be sure to tap the "R/W" button at the top of the screen if you are using Root Explorer so you have read/write permission to work in the folder.
PieceKeepr said:
You don't have to make a script just copy it all to a text document on your desktop and after you save it delete the .txt at the end. Then put it on your SD card and use Root Explorer, or similar, to move it the proper location. I set the ownership and permissions the same as other files in the same location and rebooted. Just be sure to tap the "R/W" button at the top of the screen if you are using Root Explorer so you have read/write permission to work in the folder.
Click to expand...
Click to collapse
Hey,
thnx man. Found notepad++ and made a text file with that.
Tried the script for a couple of ours and for my personal feeling it made my phone slower at multiple points. Also Quadrant standard gave me a lower score (11-13) then when i'm using 00tweaks/v4 tt.
So this goes out the door.
Cheers
I hate bringing things back from the dead, so I apologize in advance.
If I want just the atime section of this script, do I just keep the first part? Where does it stop?
AUTO
what does the auto do in the mounting script?

Boot Process research based on 2.2.3 Verizon WebDoctor

WIP research into HP Pre* boot process
Theoretical plan: port user-part to compatible droid - Pre3["rib"/"mantaray"]->XperiaRay["ST18i"]
Well, upstart scripts are complete... now for tracking dbus/luna services that are needed for the port to run..
Kernel configs:
linux-*/arch/arm/configs/rib_defconfig = pre3
linux-*/arch/arm/configs/semc_urushi_defconfig = xperia_ray
Device highlights:
sony: CONFIG_INPUT_APDS9702 (proximity filter)
sony: CONFIG_MDDI_NOVATEK_PANEL_SHARP_LS033T3LX01 (sharp display)
sony: CONFIG_MDDI_NOVATEK_PANEL_TMD_LT033MDV1000 (tmds controller)
sony: CONFIG_SND_MSM_MVS7x30_SOC (integrated audio)
sony: CONFIG_TI1271 (wifi)
sony: CONFIG_TOUCHSCREEN_CLEARPAD_I2C (synaptics clearpad)
palm: CONFIG_MT9P013 (5MP cmos)
palm: CONFIG_PMIC8058_UPL (qualcomm power management)
palm: CONFIG_SND_SOC_WM8994 (wolfson micro, 24bit 4-chan dac, 2-chan adc, 100dB SNR, Nice !)
palm: CONFIG_TOUCHSCREEN_CY8CTMA300 (cypress)
palm pre3 = "rib" or "mantaray"
WIFI: Pre3 -> Atheros 6K ar6000 driver = ar6k, non-upstream!, hardcoded in PmWifiService
Pre(1) -> Marvell sd8686 sd8xxx driver
Seems the biggest problem will be porting the WiFi manager, to make TexasInstruments 1271 look like an Atheros 6k series..
palm devices:
castle == Pre
pixie == Pixi ?
broadway == Pre2?
mantaray == Pre3
windsornot
topaz == TouchPad
opal
What do EVT1 EVT2 EVT3 / DVT1 DVT2 DVT3 mean ?
What are "opal" and "windsornot" devices ?
actual bootup code
Code:
/sbin/mkbootfs.sh -- or/and -- /sbin/tcpostflash.sh
for initrd...
cp /sbin/boot-init /sbin/init
/sbin/boot-init
echo "Mounting proc filesystem"
mount -t proc none /proc
echo "Mounting sysfs filesystem"
mount -t sysfs none /sys
echo "Creating /dev"
mount -t tmpfs -o mode=0755 none /dev
echo "Creating/Mounting /dev/pts"
mkdir /dev/pts
mount -t devpts -o gid=5,mode=620 none /dev/pts
mknod /dev/null c 1 3
mknod /dev/zero c 1 5
mknod /dev/systty c 4 0
mknod /dev/tty c 5 0
mknod /dev/console c 5 1
mknod /dev/ptmx c 5 2
mknod /dev/fb c 29 0
mknod /dev/tty0 c 4 0
mknod /dev/tty1 c 4 1
mknod /dev/tty2 c 4 2
mknod /dev/tty3 c 4 3
mknod /dev/tty4 c 4 4
mknod /dev/tty5 c 4 5
mknod /dev/tty6 c 4 6
mknod /dev/tty7 c 4 7
mknod /dev/tty8 c 4 8
mknod /dev/tty9 c 4 9
mknod /dev/tty10 c 4 10
mknod /dev/tty11 c 4 11
mknod /dev/tty12 c 4 12
mknod /dev/ttyS0 c 4 64
mknod /dev/ttyS1 c 4 65
mknod /dev/ttyS2 c 4 66
mknod /dev/ttyS3 c 4 67
mknod /dev/urandom c 1 9
mknod /dev/mmcblk0 b 179 0
mknod /dev/mmcblk0p1 b 179 1
mknod /dev/mmcblk0p2 b 179 2
mknod /dev/mmcblk0p3 b 179 3
mknod /dev/mmcblk0p4 b 179 4
mknod /dev/mmcblk0p5 b 179 5
mknod /dev/mmcblk0p6 b 179 6
mknod /dev/mmcblk0p7 b 179 7
mknod /dev/mmcblk0p8 b 179 8
mknod /dev/mmcblk0p9 b 179 9
mknod /dev/mmcblk0p10 b 179 10
mknod /dev/mmcblk0p11 b 179 11
mknod /dev/mmcblk0p12 b 179 12
mknod /dev/mmcblk0p13 b 179 13
mknod /dev/mmcblk0p14 b 179 14
mknod /dev/mmcblk0p15 b 179 15
lvm.static vgscan --ignorelockingfailure
lvm.static lvchange -ay --ignorelockingfailure /dev/mapper/store-root
mount -o ro /dev/mapper/store-root /realroot
/sbin/pivot_root /realroot /realroot/boot
umount /boot/dev/pts
umount /boot/dev
umount /boot/proc
umount /boot/sys
export EARLY_BOOT_STOP=`date -U`
exec /sbin/init
/sbin/init
/sbin/upstart -s /usr/sbin/setcpushares-upstart
(setcpusharesupstart sets up cgroup for every new task,
based with /etc/default/cpushareholder)
upstart config from dir <- /etc/event.d
upstart emits "startup" ->
/etc/event.d/rcS is started
telinit 2 -> emit "runlevel 2"
emit "stopping/stopped rcS"
"runlevel 2" -> /etc/event.d/banner
/etc/init.d/banner start
echo "Please wait: booting..." > $vtmaster
emit "stopping/stopped banner"
"stopped banner" -> /etc/event.d/sysfs
/etc/init.d/sysfs.sh start
mount -t proc proc /proc
mount sysfs /sys -t sysfs
echo 1 > /proc/sys/vm/oom_dump_tasks
emit "stopping/stopped sysfs"
"stopped sysfs" -> /etc/event.d/udev
/etc/init.d/udev start
mountpoint -q /dev/
echo "Starting the hotplug events dispatcher" "udevd"
## not loading as no /etc/event.d/udevd
# udevd --daemon
mkdir -p /dev/.udev/ /dev/.udev/db/ /dev/.udev/queue/ /dev/.udevdb/
make_extra_nodes (based on /etc/udev/links.conf)
echo "Synthesizing the initial hotplug events"
udevtrigger --subsystem-nomatch=platform --subsystem-nomatch=backlight
echo "Waiting for /dev to be fully populated"
udevsettle --timeout=$udevd_timeout
chmod 1777 /dev/shm
emit "stopping/stopped udev"
"stopped udev" -> /etc/event.d/alignment
echo "3" > /proc/cpu/alignment
emit "stopping/stopped alignment"
"stopped alignment" -> /etc/event.d/modutils
/etc/init.d/modutils.sh start
echo "Calculating module dependencies ..."
depmod -Ae
echo -n "Loading modules: "
foreach $module $args in /etc/modules
modprobe $module $args
emit "stopping/stopped modutils"
"stopped modutils" -> /etc/event.d/cgroups
. /etc/default/cpushareholder
cpushareholder_init
mkdir -p /dev/cpuacct
mount -t cgroup -o cpu,cpuacct none /dev/cpuacct
mkdir -p /dev/cpuacct/UX/APP
mkdir -p /dev/cpuacct/REST/BG
...
echo 7500 > /dev/cpuacct/UX/cpu.shares
echo 2500 > /dev/cpuacct/REST/cpu.shares
for $taskid in /dev/cpuacct/tasks
echo $taskid > /dev/cpuacct/REST/DAEMONS
emit "stopping/stopped cgroups"
"stopped cgroups" -> /etc/event.d/mountall
/etc/init.d/mountall.sh start
. /etc/default/rcS
. /etc/default/mount_checks
MOUNT_STAMP=/var/umount.stamp
WIPE_FLAGS_FILE=/var/.flags/on_mount
echo "$0: Mounting local filesystems..."
lvm.static vgscan --ignorelockingfailure
lvm.static vgchange -ay --ignorelockingfailure
echo "$0: vgscan/vgchange done" > /dev/kmsg
fsck -y -v /dev/mapper/store-root/var 2>&1 #/var with /dev/store
#fsck -y -v /dev/mmcblk0p3 2>&1 #/var without /dev/store
echo "$0: fsck of /var done" > /dev/kmsg
mount -a -t nonfs,vfat,ext3,tmpfs
# means NOnfs,NOvfat,NOext3,NOtmpfs: man mount
mount /var
if "mount /var" errors, do fixup:
/usr/sbin/fixup_partition.sh --mountpoint /var
umount -f /dev/mapper/store-var # up to 5 times in a loop
fsck -y /dev/mapper/store-var
mount /dev/mapper/store-var
echo "$0: /var mounted" > /dev/kmsg
clock_from_var.sh
hwclock -s -u #only do the following updates if hardware time is wrong
if (hw_time is wrong)
#date -S -s `date -d $(cat /etc/version) "+%s"`
date -S -s `cat /var/preferences/com.palm.power/time_saver`
echo "$0: set clock from $TIME_SRC: $(date)" > /dev/kmsg
hwclock -w -u
else
echo "$0: using /dev/rtc time: $(date)" > /dev/kmsg
lunaprop -n com.palm.system -m -s last_umount_clean [0|1 :/var/umount.stamp exists]
check that all /var/* are directories
if not_dir($path) rm -f $path;mkdir -p $path
if no_clean_mount() fixup_partition.sh --mountpoint /var/log --force-fsck
if exists /var/.rootfs_fsck fixup_partition.sh --device=/dev/mapper/store-media --force-fsck
rm -f /media/internal/FSCK*.REC # FAT lost blocks
rm -f /var/tmp; mkdir -p /var/tmp #reset /var/tmp as a directory and not a symlink
mount -a -t vfat,ext3,tmpfs #mount the automounted fs
echo "$0: rest mounted" > /dev/kmsg
check if everything mounted nicely. if not: fixup_partition.sh them
echo "$0: filesystem checking done" > /dev/kmsg
setup_cryptofs # based on /etc/cryptofs.conf, http://reboot78.re.funpic.de/cryptofs/
mkdir /media/internal/.palm
mountcfs -s /media/internal/.palm/.cryptofs -m /media/cryptofs -k /media/internal/.palm
cryptofs -o nonempty -o allow_other -s -r [params].. # based on .cryptofs
echo "$0: setup_cryptofs done" > /dev/kmsg
lunaprop -n com.palm.system -m -s media_fixed_how 1 # result from fixup_partitions on media partition
report reboot reasons: lines that start with "reason" in /var/umount.stamp
echo $REASON | rdx_reporter -F -C "rebooter" -c "rebooter" -d "$0"
rm -rf /var/lock/*
if any errors on "fsck /var"
echo "encountered error running fsck on /var: $VARFSCKRES $VARFSCK" \ ## res=error code, varfsck=output
| rdx_reporter -F -C "Fsck Error" -c "Fsck Error" -d "$Fsck error"
if error=4 (MAJOR ERROR) -> echo $error >/var/log/.fsck_error
date > /var/log/var_fsck.log
echo $VARFSCK >> /var/log/var_fsck.log ## last fsck output
... skipped developer-only rw rootfs stuff, reboting for rw-check and rm'ing /boot/uImage if error
touch /var/log/var_fsck.log /var/log/root_fsck.log
cat /var/log/var_fsck.log /var/log/root_fsck.log > /var/log/fsck.log
echo "$0: done reporting fsck results" > /dev/kmsg
run-parts /etc/init.d/postmountall.d:
check_initctl
if not_pipe(/dev/initctl) -> rm -f /dev/initctl; mknod -m 600 /dev/initctl p
keep_klog
cd /var/log
mv klog_1.txt.gz klog_2.txt.gz
klog last |gzip -c > klog_1.txt.gz # klog buffer from previous boot
dmesg -s 100000 | gzip -c > dmesg.txt.gz
kernel_lastboot
rdx_reporter $args ## nothing to report in clean case
lnsasetup
. /etc/default/lnsa.sh
mkdir -p /var/palm/system-services
mkdir -p /var/palm/ls2/roles
mkdir -p /var/palm/event.d
echo 'exec /bin/true' >/tmp/lnsa_marker
cp /tmp/lnsa_marker /var/palm/event.d/;msa_marker # actually, cp to tmp, sync, mv tmp real
rm /tmp/lnsa_marker
initctl newdir /var/palm/event.d ## add dir other than /etc/init.d to list, could trigger
logmods
mkdir -p /dev/logdir
mmc_protect
no "mmc_protect" binary => does nothing
report_lostandfound
for each path=("lost+found" dir) found on any mounted partition,
ls -lA $path | rdx_reporter ...
touch $path/_landf_rdxd_reported_marker_ ## so it doesn't report again
rm_varlogtmp
rm -rf /var/log/temp
runlevel
touch /var/run/utmp
runlevel --set 2 ## might trigger something, but probably doesn't
scaling
echo ondemandtcl >/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
kill -USR1 1 ## for bootloggerd ?
echo "$0 done" > /dev/kmsg
mkdir -p /var/preferences
chown root /var/preferences
chmod 777 /var/preferences
mkdir -p /var/home/root
mkdir -p /var/tmp
emit "stopping/stopped mountall"
"stopped mountall" -> swaphack, tokens, timezone, watchdogd
-> /etc/event.d/swaphack
/etc/init.d/swaphack.sh
if /var/swap -> rm /var/swap # using /dev/store/swap now !
if !/dev/store/swap
dd if=/dev/zero of=/dev/store/swap bs=100663296 count=1 # 96MB of swap
mkswap /dev/store/swap
echo cfq > /sys/block/mmcblk0/queue/scheduler
echo 6000 > /proc/sys/vm/dirty_expire_centisecs
swapon /dev/store/swap
emit "stopping/stopped swaphack" -> compcache
/etc/event.d/compcache
swapoff -a
sleep 1
modprobe xvmalloc
modprobe ramzswap memlimit_kb=25600 backing_swap=/dev/store/swap
sleep 3
swapon /dev/ramzswap0 -p 100
emit "stopping/stopped compcache" -> no listeners
-> /etc/event.d/timezone
no /usr/bin/tzset -> do nothing
emit "stopping/stopped timezone" -> no listeners
-> /etc/event.d/watchdogd
/sbin/watchdogd #respawn
talks to /dev/watchdog, pings every X seconds
emit "stopping/stopped watchdogd" -> no listeners
-> /etc/event.d/tokens
/sbin/tokens --mount #trenchcoat=storage flasher + tokens=fs-tokens supports omap24xx,omap34xx,msm,tegra
source: http://subversion.palm.com/main/nova/palm/trenchcoat/submissions/132.4/trenchcoat.c
reads /dev/tokens -> OEM Data:
ProductName,Modem,RAMSize,FlashSize,HwoRev,BToADDR,WIFIoADDR,ProdSN,ProductSKU
emit "stopping/stopped tokens" -> /etc/event.d/populate-volatile
/etc/init.d/populate-volatile.sh start
/sbin/popvol < /etc/default/popvol.d/* # actually, for file in `ls`...
/etc/default/popvol.d/00_core
mkdir|/var/backups|0|0|0755
mkdir|/var/cache|0|0|0755
mkdir|/var/lib|0|0|0755
mkdir|/var/lib/ipkg|0|0|0755
mkdir|/var/lib/misc|0|0|0755
mkdir|/var/lib/software|0|0|0755
mkdir|/var/lib/software/ModemFiles|0|0|0755
mkdir|/var/lib/software/SessionFiles|0|0|0755
mkdir|/var/lib/software/tmp|0|0|0755
mkdir|/var/lib/update|0|0|0755
mkdir|/var/local|0|0|02755
mkdir|/var/lock|0|0|01777
mkdir|/var/lock/subsys|0|0|0755
mkdir|/var/log|0|0|0755
mkdir|/var/run|0|0|0755
mkdir|/var/spool|0|0|0755
mkdir|/tmp|0|0|01777
touch|/var/run/utmp|0|0|0644
touch|/var/log/wtmp|0|0|0644
mknod|/dev/heap|0|0|1|5|020644
/etc/default/popvol.d/01_pulse
mkdir|/var/run/pulse|31|31|0755
/etc/default/popvol.d/02_jail
mkdir|/var/palm|0|0|0755
mkdir|/var/palm/jail|0|0|0755
mkdir|/var/palm/data|0|0|0755
emit "stopping/stopped populate-volatile" -> devpts, minicore2
-> /etc/event.d/minicore2 # everything disabled, so doing nothing much
echo "" > /proc/sys/kernel/minicore_pattern
echo "" > /proc/sys/kernel/core_pattern
emit "stopping/stopped minicore2" -> no listeners
-> /etc/init.d/devpts.sh start
mknod -m 666 /dev/ptmx c 5 2
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts -ogid=5,mode=620 ## 5="tty", 600='mesg n' default
emit "stopping/stopped devpts" -> hostname
-> /etc/init.d/hostname.sh start
hostname -F /etc/hostname # "webos-device"
emit "stopping/stopped hostname" -> pmsyslogd, pmklogd, urandom, usbctrl
-> /etc/event.d/pmsyslogd #PmLogDaemon, logs to /var/log/messages
/usr/bin/pmsyslogd -z -f 6 -m # UTZ/C tstamp, usec resolution, monotonic
emit "stopping/stopped pmsyslogd" -> no listeners
-> /etc/event.d/pmklogd # logs to /var/log/pmklogd.log
/usr/bin/pmklogd -n -d 1 #startup delay=1sec, "-n"=run in foreground??
emit "stopping/stopped pmklogd" -> no listeners
-> /etc/event.d/urandom
/etc/init.d/urandom start
echo "Initializing random number generator..."
cat /var/lib/urandom/random-seed >/dev/urandom
emit "stopping/stopped urandom" -> no listeners
-> /etc/event.d/usbctrl
if usbnet enabled
/sbin/modprobe -q g_composite product=0x101 #0x103 for armv6l
else if novacom enabled
/sbin/modprobe -q g_composite product=0x8002 #0x8012 for armv6l
else #(normal)
/sbin/modprobe -q g_composite product=0x8004 #0x8012 for armv6l
emit "stopping/stopped usbctrl" -> networking
-> /etc/event.d/networking
/etc/init.d/networking start
ifup -a -f # /etc/network/interfaces - auto=lo,usb0:1
echo "done."
emit "stopping/stopped networking" -> bootmisc
=========== AT THIS STAGE, ONLY BOOTMISC THREAD EXECUTION CONTINUES ============
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-> /etc/init.d/bootmisc.sh start
if "OMAP3430" matches /proc/cpuinfo
echo 600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
echo 500000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
## needs to be set twice, board bug
chmod 666 /dev/tty[p-za-e][0-9a-f]
chown root:tty /dev/tty[p-za-e][0-9a-f]
if /etc/ld.so.cache symlinks to /var/cache/ld.so.cache
/sbin/ldconfig -C /var/cache/ld.so.cache
else
rm -f /var/cache/ld.so.cache
emit "stopping/stopped bootmisc" -> novacomd, ls-hubd_private, ttyS2
-> /etc/event.d/ttyS2
/sbin/getty console 115200 vt100
-> /etc/event.d/novacomd
#no /var/gadget/novacom_enabled => do nothing
#otherwise: mkdir /dev/gadget; mount -tgadgetfs /dev/gadget; /sbin/novacomd
emit "stopping/stopped novacomd"
-> /etc/event.d/ls-hubd_private #ls=LunaService
/usr/bin/ls-hubd --conf /etc/ls2/ls-private.conf --pmloglib
# /home/reviewdaemon/projects/nova/oe/BUILD-mantaray/work/luna-service2-2.0.0-131.2/131.2/src/hub/conf.c
#/usr/bin/ls-monitor /usr/bin/LunaSysMgr js, using /tmp/com.palm.private_hub
# UGLY HACK!!!!: /sbin/initctl emit --no-wait %s-ready
/sbin/initctl emit --no-wait ls-hubd_private-ready
..emit "ls-hubd_private-ready" -> /etc/event.d/ls-hubd_public
"ls-hubd_private-ready" ->
-> /etc/event.d/ls-hubd_public
/usr/bin/ls-hubd --public --conf /etc/ls2/ls-public.conf --pmloglib
/sbin/initctl emit --no-wait ls-hubd_private-ready
..emit "ls-hubd_public-ready" -> finish, node_fork_server
..at some point.. emit "stopping/stopped ls-hubd_public" -> ls-hubd_public_watchdog
-> /etc/event.d/ls-hubd_public_watchdog
/usr/sbin/reboot_ls-hubd_if.sh ${EXIT_STATUS} ls-hubd_public
..at some point.. emit "stopping/stopped ls-hubd_private" -> ls-hubd_private_watchdog
-> /etc/event.d/ls-hubd_private_watchdog
/usr/sbin/reboot_ls-hubd_if.sh ${EXIT_STATUS} ls-hubd_private
=========== AT THIS STAGE, PRV/PUB LS ARE RUNNING AND ONLY ONE UPSTART SIGNAL thread REMAINS ============
continuation of upstart scripts after Luna Service hub is started
Code:
"ls-hubd_public-ready" (emitted using /sbin/initctl from within /usr/bin/ls-hubd)
-> finish, node_fork_server
-> /etc/event.d/node_fork_server
if memtotal from /proc/meminfo >524288 (512M)
mkdir -p /var/palm/node
touch /var/palm/node/fork
/usr/palm/nodejs/node --max_old_space_size=23068672 /usr/palm/nodejs/fork_server.js ## 23068672=22MB
/sbin/initctl emit --no-wait node_fork_server-ready
else /sbin/initctl emit node_fork_server-ready
emit "node_fork_server-ready" -> no listeners
..emit "stopping/stopped node_fork_server" -> no listeners
-> /etc/event.d/finish
# record upstart timing for boottime tracking.
# $EARLY_BOOT_PID is set in /sbin/boot-init, ran from /sbin/tcpostflash.sh, /sbin/mkbootfs.sh, /sbin/upstart
mkdir -p /tmp/misc-props
echo -n $EARLY_BOOT_PID > /tmp/misc-props/pids.early_start
echo -n $EARLY_BOOT_START > /tmp/misc-props/timing.early_start
echo -n $EARLY_BOOT_STOP > /tmp/misc-props/timing.early_stop
echo -n $UPSTART_STARTTIME > /tmp/misc-props/timing.upstart_begin
echo -n $$ > /tmp/misc-props/pids.upstart_finish
echo -n `date -U` > /tmp/misc-props/timing.upstart_finish
/etc/init.d/bootmark.sh start
echo (16_random_bytes_in_hex) > /var/log/bootmark
run-parts /etc/event.d/finish-poststart.d
/etc/event.d/finish-poststart.d/001-mountcrypt
/usr/bin/mountcrypt /dev/mapper/store-mojodb store-cryptodb /dev/mapper/store-filecache store-cryptofilecache
mount /var/db
mount /var/file-cache
/etc/event.d/finish-poststart.d/020-setup_jails
rm -f /etc/nojail
emit "stopping/stopped finish" ->
logctld, configurator, mojodb, powerlog, PmNetConfigManager, pulseaudio, LunaDownloadMgr,
eventreporter, powerd, rdxd, lnsawait, Qmuxd, bluetooth, fontconfig_cache, certstoreinit,
tempdb, qcomm_rmt_storage, keymanager, filecache, hidd, memchute, passthrud, ossinfo,
mediaserver, audiod, PmModemEfsLogger, extractfs, TelephonyInterfaceLayer
-> TelephonyInterfaceLayer (no listeners for stop signals)
exec /usr/bin/PmWsfDaemon -c /etc/til.d/tilwsf.conf # /usr/lib/libTelephonyInterfaceLayer.so, -c /etc/til.d/til.conf
#Src/Core/NativeHost/BladeLoaderDl.cpp:101 dlopen()
#Src/Core/NativeHost/BladeLoaderDl.cpp:373 Calling %s to create service blade
#Luna Type=LunaTelephony,LunaMessaging ServiceName=com.palm.telephony
#LaunchCodeExternalApp=com.palm.app.phonediag
#LaunchCodeExternalAppCodesCdma=786;3836;33284;3282;477;673;123;889;8378;3366;\
#..72346;633;8766;87633;2539;7738;66236;2833766;28337633;
#LaunchCodeExternalAppCodesGsm=786;
#LunaMessaging ServiceName=com.palm.messagingrouter Interface=LunaInterfaceSms
#services supported by the GSM phone
#THandlersGsm=ServiceStateGsm;ServiceCallGsm;ServiceSmsGsm;ServiceLbsGsm;ServiceAudioGsm;
#..ServiceDeviceUsageGsm;ServiceSsGsm;ServiceDeviceCfgGsm;ServiceDataGsm;
#PHandlers=ServiceSim;ServicePower;ServiceSpb;ServiceStk;
# sprint verizon bellmo chinatel
-> extractfs (no listeners for stop signals)
mkdir -p /var/luna/data/extractfs
/usr/bin/extractfs -f /var/luna/data/extractfs #something to do with image extraction
umount -f /var/luna/data/extractfs
-> PmModemEfsLogger (no stop listeners)
# no modem in /proc/cmdline for normal users => not doing anything, otherwise PmModemEfsLogger would log ramdump etc
-> audiod (no stop listeners)
/usr/sbin/audiod -n -1 # com.palm.audio version 368.49, uses /etc/audio/{a,b,c}/global.conf
#/home/reviewdaemon/projects/nova/oe/BUILD-mantaray/staging/
#..arm-none-linux-gnueabi/include/boost/dynamic_bitset/dynamic_bitset.hpp etc
-> mediaserver (no stop listeners)
ionice -c1 /usr/bin/mediaserver --gst-debug=1 # version 428.51, should have been --gst-debug-level=1
-> ossinfo (no stop listeners) #copies PDF to media partition
cp /usr/lib/ossinfo/Open\ Source\ Information.pdf /media/internal/Open\ Source\ Information.pdf
-> passthrud (no stop listeners) #com.palm.usbpassthrough
#/usr/bin/start-passthrud # would run if had /var/preferences/com.palm.usbpassthrough/passthrud.conf
-> memchute (no stop listeners)
echo "0,85,95,114,120" > /sys/module/lowmemnotify/parameters/thresholds_enter
echo "0,80,90,108,112" > /sys/module/lowmemnotify/parameters/thresholds_leave
/usr/sbin/memchute # kills top 5 memory-using-procs if >THRESHOLD when low on memory
-> hidd (no stop listeners)
mkdir -p /dev/cgroup/input
echo $$ > /dev/cgroup/input/tasks #current process id
/usr/bin/hidd -v -f /etc/hidd/HidPlugins.xml --output-syslog
#plugins: keypad,touchpanel,accelerometer,compass,proximity,lightg,AVrcp(bluetooth),inputdev
-> keymanager (no listeners)
/usr/bin/keymanager -c '{"log":{"appender":{"type":"syslog"},"levels":{"default":"warning","keymanager":"info"}}}'
#using /var/palm/data/keys.db, /var/palm/data/otakeys.db, 4809febfe1df7d2a108fddc388cdb29e
#.. store-cryptodb.key, store-cryptofilecache.key, /var/luna/data/.passcode, "please", "youdidntsaythemagicword"
#does sql-style db work: SELECT id,ownerID,keyID,data,keysize,type,scope,hash FROM keytable WHERE id = ?
#.. SELECT id FROM keytable WHERE ownerId LIKE ?
# "EJGlZxDhLvgXn+p/K9s8gQ==" (base64)
-> qcomm_rmt_storage (no listeners)
/usr/sbin/qcom_rmt_storage /dev/mmcblk0p7 /dev/mmcblk0p8
#uses /dev/rmt_storage, /boot/modem_fs1, /boot/modem_fs2
-> tempdb (no listeners)
#does nothing!
-> certstoreinit (no listeners)
mkdir -p /var/ssl/crl
zcat /etc/ssl/crl/*.gz >/var/ssl/crl/crl-bundle.crl
mkdir -p /var/ssl/trustedcerts
cd /var/ssl/trustedcerts && tar xzf /etc/ssl/certs/calinks.tgz
mkdir -p /var/ssl/public
echo '01' > /var/ssl/serial
mkdir -p /var/ssl/certs
mkdir -p /var/ssl/private
touch /var/ssl/index.txt
luna-send -n 1 luna://com.palm.certificatemanager/addcrl \
'{"url":"http://crl.palm-contentid.pp.trustcenter.de/crl/v2/palmcontentid-CA-I.crl"}'
-> bluetooth (no listeners)
/usr/bin/BluetoothMonitor
-> Qmuxd (no listeners)
/usr/bin/Qmuxd #RMNET qmi connection
-> lnsawait (no listeners)
# "preventing started event from going out" ?
initctl status lnsa_marker
if no status -> loop. otherwise return ok
# should return nonzero since /var/palm/event.d was added to initctl dirs previously
# during mountall->mountall.sh->postmountall.d/lnsasetup
-> rdxd (no listeners)
/usr/bin/rdxd -s #Remote Diagnostics (incl. Telephony)
#uses /etc/rdxd.conf, /usr/lib/rdxd/*.sh scripts
-> powerd (no listeners)
mkdir -p /var/preferences/com.palm.power
cp /usr/var/preferences/com.palm.power /var/preferences/com.palm.power #use cp tmp;sync;mv tmp real
#config /sys/ parameters for PM on msm8x60, not applicable to phones
#for other devices seems there's nothing extra to do
-> eventreporter (no listeners)
/usr/bin/eventreporterserver #uses /tmp/evts.sock, /tmp/events.dat, JSON messages
-> LunaDownloadMgr (no listeners)
mkdir -p /dev/cgroup/web
echo $$ >/dev/cgroup/web/tasks # puts current process into web cgroup, later done with setcpushares-task
env CHARSET="UTF-8" /usr/bin/LunaDownloadMgr # ionice -c 3 on TouchPad (topaz)
# palm://com.palm.connectionmanager/setnovacommode {"isEnabled":true, "bypassFirstUse":false}
# palm://com.palm.connectionmanager/getStatus {"subscribe":true}
# palm://com.palm.bus/signal/registerServerStatus {"serviceName":"com.palm.connectionmanager", "subscribe":true}
# palm://com.palm.lunabus/signal/addmatch {"category":"/storaged", "method":"MSMAvail"}
# .. {"category":"/storaged", "method":"MSMProgress"}
# .. {"category":"/storaged", "method":"MSMEntry"}
# .. {"category":"/storaged", "method":"MSMFscking"}
# uses curl for downloads, /etc/palm/downloadManager.conf, /etc/palm/downloadManager-platform.conf
# logs into db: "DELETE FROM DownloadHistory WHERE owner = %", "DELETE FROM DownloadHistory WHERE ticket = %lu"
-> powerlog (no listeners)
/usr/sbin/powerlog -i 60 -c $CPUCOUNT -f $FREQ_COUNT -m
# cpucount = cpus, freq_count=number of freqs, -i60=60seconds, -m=topmemusers
-> mojodb (no listeners)
/usr/bin/mojodb-luna -c /etc/palm/mojodb.conf /var/db #version 1.9-52.16-mantaray, using /tmp/mojodb/tempdb_init
-> logctld (no listeners)
/usr/bin/logctld -v
#GPS: /var/log/gpsfixes, /var/log/gpsfixes_*.csv
#calls /sbin/logctld_clear_all.sh, /sbin/logctld_collect_all.sh
#palm://com.palm.service.collectlogs/autosend
-> pulseaudio
mkdir -p /home/root/.pulse
ionice -c1 /usr/bin/pulseaudio --log-target=syslog
#uses /etc/pulse/system.pa , /etc/pulse/default.pa, /etc/pulse/daemon.conf, /usr/lib/pulse-0.9.22/modules
#compiled using: /home/reviewdaemon/projects/nova/oe/BUILD-mantaray/staging/arm-none-linux-gnueabi/include
#.. -fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -fno-strict-aliasing
#.. -fno-inline-functions -g -ffast-math -D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
emit "started pulseaudio" -> systemsoundsloader
->> systemsoundsloader (no listeners)
/usr/bin/systemSoundsLoader #loadSystemSounds from /usr/share/systemsounds/* or *-ondemand.pcm
-> fontconfig_cache
ionice -c 3 nice -n 20 fc-cache #run cache rebuild as nicely as possible
touch /var/cache/fontconfig/cached
emit "stopped fontconfig_cache" -> browserserver, smartkey
->>smartkey (no listeners)
mkdir -p /dev/cgroup/web
echo $$ > /dev/cgroup/web/tasks # this process goes into web cgroup
/usr/bin/SmartKeyService #SpellChecker - find best candidates based on dictionary, score map, frequency map
#uses XT9: /usr/palm/smartkey/XT9, /etc/palm/smartkey.conf
->>browserserver (no listeners)
export LD_PRELOAD="/usr/lib/libptmalloc3.so" #use custom malloc for browser
mkdir -p /dev/cgroup/web
echo $$ > /dev/cgroup/web/tasks # files this process into web control group
/usr/bin/BrowserServer #version 2.0.0-237.13, -d 30000 on TouchPad (topaz) +browserservermojo
#uses /var/luna/data/browser/icons, /var/palm/data/browser-cookies.db /dev/msm_vidc_dec /dev/pmem_adsp
chmod -R g+w /var/ssl
chown -R root.luna /var/ssl
chown luna:luna -R /var/palm/data/http_* /var/palm/data/https_*
chmod -R o+rwx /var/palm/data/http_* /var/palm/data/https_*
#conf from /etc/palm/browser-app.conf, /etc/palm/browser-app-platform.conf, /etc/ssl/openssl.cnf
-> filecache
/usr/bin/filecache -c {\"log\":{\"appender\":{\"type\":\"syslog\"},\"levels\":{\"default\":\"warning\"}}}
emit "started filecache" -> LunaSysService, LunaUniversalSearchMgr
->>LunaSysService
/usr/bin/LunaSysService
#uses /usr/lib/luna/customization/region.json, /etc/palm/region.json,
#.. /usr/lib/luna/customization/locale.txt, /etc/palm/locale.txt,
#.. /etc/palm/defaultPreferences.txt, /etc/palm/defaultPreferences-platform.txt
#.. /usr/lib/luna/customization/cust-preferences.txt, /etc/palm/CustomerCareNumber.txt
#.. /var/luna/preferences/systemprefs.db, systemprefs_backup.db
# does ntp time update from ntp0.palmws.com (ntpdate -bqu)
#.. /etc/palm/palm-customization-info
->>LunaUniversalSearchMgr (no listeners)
export LD_PRELOAD=/usr/lib/libmemcpy.so
/usr/bin/LunaUniversalSearchMgr
# addDBSearchItem/removeDBSearchItem, modifyActionProvider
# /usr/lib/luna/customization/resources/*/UniversalSearchList.json
# SELECT value FROM SearchPreference WHERE key=%Q
# CREATE TABLE IF NOT EXISTS SearchList (id TEXT, category TEXT, displayName TEXT, iconFilePath TEXT, url TEXT,
# suggestURL TEXT, launchParam TEXT, type TEXT, enabled INTEGER, version INTEGER, PRIMARY KEY(id, category) );
# CREATE TABLE IF NOT EXISTS DBSearchList (id TEXT PRIMARY KEY, category TEXT, displayName TEXT,
# iconFilePath TEXT, url TEXT, launchParam TEXT, launchParamDbField TEXT, dbQuery TEXT, displayFields TEXT,
# batchQuery INTEGER, enabled INTEGER, version INTEGER );
# CREATE TABLE IF NOT EXISTS SearchPreference (key TEXT NOT NULL ON CONFLICT FAIL UNIQUE ON CONFLICT REPLACE,
# value TEXT);
-> PmNetConfigManager
/usr/bin/PmNetConfigManager
#logs to /tmp/netconfigmanager.log
#interfaces with netfilter, iptables, enabling/disabling nat, routes, mtu clamping:
# /usr/sbin/iptables -D FORWARD -t mangle -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
# /usr/sbin/iptables -A FORWARD -t mangle -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
# /usr/sbin/iptables -t nat --flush
# RTSP: /usr/sbin/iptables -I INPUT -p udp --sport 6970:6999 -j ACCEPT
# mDNS: /usr/sbin/iptables -I OUTPUT -p udp -m udp --dport 5353 -o %s -j DROP
# NAT: /usr/sbin/iptables -t nat -I POSTROUTING -o %s -j MASQUERADE
# /sbin/dhclient -d -cf /etc/pmnetconfig/webOsDhclient.conf -sf /etc/pmnetconfig/webOsDhclient-script -lf -pf ..
# /usr/bin/ntpdate -uq %s pool.ntp.org
# traceroute,ping,arping, wifi authenticator,tether, /etc/pmnetconfig/staticroutes, novacom
# /sbin/sysctl -n -e -q -p /etc/pmnetconfig/netsysctrl.conf
# /sbin/ip rule flush; /proc/sys/net/ipv4/route/flush
emit "started PmNetConfigManager" -> mdnsd, PmWiFiService
->>mdnsd (no listeners)
/usr/sbin/mdnsd -debug # mDNSResponder-258.14, /etc/mdnsd.conf -> /var/log/mdnsd.log
# services url: http://www.dns-sd.org/ServiceTypes.html
->>PmWifiService (no listeners)
check if /dev/tokens/WIFIoADDR exists
/usr/bin/PmWiFiService
# hardwired for Atheros AR6000:
# insmod /lib/modules/`uname -r`/kernel/net/wifi/ar6000.ko || rmmod ar6000
# /tmp/ath6k/token_bdata.SD32.bin || /var/preferences/com.palm.wifi/skip-token-caldata
# ath6k/hw2.1.1/bdata.SD32.bin ath6k/hw2.1.1/3g_bdata.SD32.bin ath6k/hw2.1.1/lte_bdata.SD32.bin
# /lib/firmware/ath6k
# uses /usr/sbin/wpa_supplicant and hostapd
# /sbin/dhclient -cf /etc/PmWiFiDhclient.conf -sf /etc/PmWiFiDhclient-script -lf -pf /var/run/dhclient.eth0.pid
-> configurator
! luna-send -n 1 palm://com.palm.configurator/run '{"types":["dbkinds","filecache"]}' # triggers service launch?
! luna-send -n 1 palm://com.palm.configurator/run '{"types":["dbpermissions"]}' # triggers service launch?
initctl emit datastore-initialized
-> "datastore-initialized" -> /etc/event.d/activitymanager
->>activitymanager # manages activity lists, cgroup priorities
/usr/bin/activitymanager -c {\"log\":{\"appender\":{\"type\":\"syslog\"},\"levels\":{\"default\":\"warning\"}}}
/sbin/initctl emit activitymanager-ready
-> "activitymanager-ready" -> configurator-async, filenotifyd, UpdateDaemon
->>configurator-async (no listeners)
! luna-send -n 1 palm://com.palm.configurator/run '{"types":["activities"]}' #triggers service?
->>filenotifyd (no listeners)
ionice -c2 -n7 /usr/bin/filenotifyd
# create table if not exists files (path TEXT UNIQUE ON CONFLICT REPLACE,
# size INTEGER, modified INTEGER)
# create table if not exists actions (revision INTEGER PRIMARY KEY AUTOINCREMENT,
# action_type INTEGER, size INTEGER, modified INTEGER, path TEXT, new_path TEXT)
# insert into files (path, size, modified) values (?,?,?) // insert
# select size, modified from files where path=? // get
# delete from files where path=? // remove
# update files set path=? where path=? // rename
# select path, size, modified from files where path like ? // directory list
# insert into actions (action_type, size, modified, path, new_path) values (?,?,?,?,?)
# select revision, action_type, size, modified, path, new_path from actions
# where revision >= ? order by revision asc limit ?
# select count(*) from action
# delete from actions where revision < ?
->>UpdateDaemon (no listeners)
/usr/bin/UpdateDaemon
# mount /var/lib/update
# tar xvzf /var/lib/update/data.tar.gz -m --no-same-owner --no-same-permissions
# OmaDm [-set_domain|-client|-task|-server|-prepare]
# server: https://ps.palmws.com/palmcsext/swupdateserver
# curl proxy: 68.28.31.33:80 (sprint), headers
# Expect: Cache-Control: no-cache
# User-Agent: palm/1.0 // InitHeader ?
# User-Agent: HTTP SyncML Client [en] (WinNT; I)
# Accept-Language: en
# Accept: application/vnd.syncml.dm+xml
# Content-Type: application/vnd.syncml.dm+xml
# Accept-Charset: utf-8
# x-syncml-hmac: algorithm= , username=" ", mac=
# name: omadm.swupdate.palm.com
# password: serverguestpassword
# name: guest
# passwird: guestpassword
# extra ips: 68.28.15.12, 68.28.31.12, 63.168.238.41, 68.168.229.130
# /var/lib/update/PmUpdater // /usr/bin/PmUpdater exists
#/usr/bin/mmipkg, /sbin/tellbootie
! luna-send -n 1 palm://com.palm.configurator/run '{"types":["activities"]}' # triggers service launch?
emit "stopped configurator" -> LunaSysMgr, PmWanDaemon
->>PmWanDaemon (no listeners)
/usr/bin/PmWsfDaemon -c /etc/wan.d/wan.conf # load /usr/lib/libPmWsfWanBlade.so
# set up wan connection, check TETH-ENTITLEMENT
->>LunaSysMgr
emit "started LunaSysMgr" -> CustomizationService, firstuse-createDefaultAccount,
mediasyncexporter, pubsubservice, vpnremover-eventd
->> CustomizationService (no listeners)
luna-send -n 1 luna://com.palm.lunabus/signal/registerServerStatus '{"serviceName":"com.palm.systemservice","subscribe":true}'
# up to 3 times, 10sec retry, until "connected" in output
luna-send -n 1 luna://com.palm.service.customization/customize '{}'
# up to 4 times, 15sec retry, until "connected" in output
->> firstuse-createDefaultAccount (no listeners)
luna-send -n 1 palm://com.palm.accountservices/createNovaAccount '{"createDefaultAccount":true}'
->> mediasyncexporter (no listeners)
if exists /media/internal/iPod_Control # means there is media data to export
luna-send -i -n 1 palm://com.palm.activitymanager/create \
'{"start":true, \
"type":{"priority":"lowest"}, \
"activity":{"name":"mediasyncexporter", "description": "export media sync data to standard media files", \
"callback": {"method": "palm://com.palm.mediasyncexporter/export", "params": {}}}}'
->> pubsubservice (no listeners)
/usr/bin/pubsubservice #uses /var/pubsub/cache, /var/pubsub/pubsubhandlers.conf, /etc/palm/pubsub_handlers/
# most probably uses xmpp protocol, jabber server j005.palmws.com, http://jabber.org/protocol/pubsub#node_config
# docs here: http://xmpp.org/extensions/xep-0060.html
->> vpnremover-eventd (no listeners)
# ! removes the VPN Service App/Framework from App Catalog !
luna-send -n 1 palm://com.palm.appinstaller/remove '{"packageName": "com.palm.app.vpn"}'
luna-send -n 1 palm://com.palm.appinstaller/remove '{"packageName": "com.palm.app.vpnframework"}'
echo "1" > /proc/sys/vm/overcommit_memory
mkdir -p /var/luna/preferences
mkdir -p /dev/cgroups/ui /dev/cgroups/application /dev/cgroups/focused /dev/cgroups/unfocused \
/dev/cgroups/unfocused/none /dev/cgroups/unfocused/lowest /dev/cgroups/unfocused/low /dev/cgroups/unfocused/normal \
/dev/cgroups/unfocused/high /dev/cgroups/unfocused/highest
/bin/echo $$ > /dev/cgroups/ui/tasks
/bin/echo 18432 > /dev/cgroups/ui/cpu.shares
export LD_PRELOAD="/usr/lib/libptmalloc3.so"
/usr/bin/LunaSysMgr -s [if first-time, add "-u minimal -a com.palm.app.firstuse"]
# use /etc/palm/luna.conf /etc/palm/luna-platform.conf
# application paths defined:
# /var/luna/applications/ /var/palm/data/com.palm.appInstallService /media/cryptofs/apps
# usr/palm/applications usr/palm/packages usr/palm/services
# /media/cryptofs/apps/usr/lib/ipkg/info /media/cryptofs/tmp
# /usr/luna/launchpoints/ /var/luna/launchpoints/
# /usr/lib/luna/system/luna-systemui/ /usr/lib/luna/system/luna-applauncher/
# /usr/palm/sysmgr/images/ /usr/palm/sysmgr/localization /usr/palm/sysmgr-cust/localization
# /var/luna/preferences/
# /usr/palm/command-resource-handlers.json /var/usr/palm/command-resource-handlers-active.json
# SysMgr compiled against Qt 4.6.1, HW egl render mode
# /usr/bin/jailer -t -i %s (launching processes) with LD_PRELOAD libpvrtc.so
# deals with cards and card-processes/subsumers
/sbin/initctl emit first-use-finished
emit "first-use-finished" -> configurator (already ran)
/sbin/initctl emit --no-wait LunaSysMgr-ready
emit "LunaSysMgr-ready" -> LunaReady, tap2share
->> tap2share (no listeners)
/usr/sbin/tap2shared #/dev/a6_[0-9] or a23 device for transfers, topaz has back and rear A6
->> LunaReady
mkdir -p /dev/cgroups/application
/bin/echo $(pidof WebAppMgr) > /dev/cgroups/application/tasks
/bin/echo 2048 > /dev/cgroups/ui/cpu.shares
emit "started LunaReady" -> customization-install
->> customization-install
# call customization service to install any stub apps
luna-send -n 1 -a com.palm.service.customization palm://com.palm.service.customization/postFirstUseInstall '{}'
# hack to turn on wifi after first use the first time only
luna-send -n 1 -a com.palm.service.customization palm://com.palm.wifi/setstate '{ "state": "enabled" }'
# create a semaphore so that the app install and the wifi setting only ever run one time
touch /var/luna/data/Customization/postfirstuse_complete.txt
======================= UPSTART SCRIPTS END HERE =================================
--
luna-send uses liblunaservice.so which uses the previously-started ls-hub for message transfer
/var/preferences/com.palm.bus/public_bus_default
/tmp/com.palm.private_hub /tmp/com.palm.public_hub
HUB_INET_ADDRESS
192.168.2.101:4412 192.168.2.101:4411 127.0.0.1:4412 127.0.0.1:4411
com.palm.configurator = /usr/share/dbus-1/system-services/com.palm.configurator.service
TODO: d-bus/luna services statup...
silvioster said:
palm devices:
castle == Pre
pixie == Pixi ?
broadway == Pre2?
mantaray == Pre3
windsornot
topaz == TouchPad
opal
What do EVT1 EVT2 EVT3 / DVT1 DVT2 DVT3 mean ?
What are "opal" and "windsornot" devices ?
Click to expand...
Click to collapse
broadway = Veer
roadrunner = Pre2
opal = TouchPad Go (7 inch)
windsornot = never released device
EVT = early prototypes
DVT = later prototypes, close to production.
-- Rod
silvioster said:
WIFI: Pre3 -> Atheros 6K ar6000 driver = ar6k, non-upstream!, hardcoded in PmWifiService
Pre(1) -> Marvell sd8686 sd8xxx driver
Seems the biggest problem will be porting the WiFi manager, to make TexasInstruments 1271 look like an Atheros 6k series..
Click to expand...
Click to collapse
ar6k is upstream in the staging branch since 2.6.37 according this :
lxr.free-electrons.com/source/drivers/staging/ath6kl/htc2/AR6000/ar6k.c?v=2.6.37;a=arm

[MOD][GUIDE]tweak collections for build.prop/init.d

1 i DIDNT made this all tweaks ... Credit goes to their Developers...
I am not responsible for your bricked phone/sd if u pointed on me i will laugh at u
Forever king Tweaks....​
Build.prop tweaks​
1 VM Heapsize; higher the RAM
Code:
dalvik.vm.heapsize=48m
2 Good JPG quality
Code:
ro.media.enc.jpeg.quality=100
3 Render UI with GPU
Code:
debug.sf.hw=1
4 Best Scrolling
Code:
windowsmgr.max_events_per_sec=150
5 Decrease dialing out delay
Code:
ro.telephony.call_ring.delay=0
6 battery Saving
Code:
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
7 Disable debugging notify icon on statusbar
Code:
persist.adb.notify=0
8 Increase touch responsiveness
Code:
debug.performance.tuning=1
video.accelerate.hw=1
9 Awesome photo and video recording quality
Code:
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
10 Network tweaks
Code:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
11 Internet fast tweaks
Code:
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
12 Fix some application issues (FC)
ro.kernel.android.checkjni=0
13 Phone will not wake up from hitting the volume rocker
Code:
ro.config.hwfeature_wakeupkey=0
14 Disable boot animation for faster boot
Code:
debug.sf.nobootanimation=1
15 faster streaming
Code:
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
16 Miscellaneous Tweaks for performance
Code:
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
17 Use Google DNS
Code:
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Init.d tweaks​
(needs ROM with init.d access and busybox, open empty file, insert header "#!/system/bin/sh" and put these there, save in /system/etc/init.d and name it something like tweak1)
1 strict minfree handler tweak
Code:
echo "2048,3072,6144,15360,17920,20480" > /sys/module/lowmemorykiller/parameters/minfree
2 internet speed hack tweaks
Code:
echo "0" > /proc/sys/net/ipv4/tcp_timestamps;
echo "1" > /proc/sys/net/ipv4/tcp_tw_reuse;
echo "1" > /proc/sys/net/ipv4/tcp_sack;
echo "1" > /proc/sys/net/ipv4/tcp_tw_recycle;
echo "1" > /proc/sys/net/ipv4/tcp_window_scaling;
echo "5" > /proc/sys/net/ipv4/tcp_keepalive_probes;
echo "30" > /proc/sys/net/ipv4/tcp_keepalive_intvl;
echo "30" > /proc/sys/net/ipv4/tcp_fin_timeout;
echo "404480" > /proc/sys/net/core/wmem_max;
echo "404480" > /proc/sys/net/core/rmem_max;
echo "256960" > /proc/sys/net/core/rmem_default;
echo "256960" > /proc/sys/net/core/wmem_default;
echo "4096,16384,404480" > /proc/sys/net/ipv4/tcp_wmem;
echo "4096,87380,404480" > /proc/sys/net/ipv4/tcp_rmem;
3 kernel tweaks
Code:
echo "8" > /proc/sys/vm/page-cluster;
echo "64000" > /proc/sys/kernel/msgmni;
echo "64000" > /proc/sys/kernel/msgmax;
echo "10" > /proc/sys/fs/lease-break-time;
echo "500,512000,64,2048" > /proc/sys/kernel/sem;
4 vm management tweaks
Code:
echo "4096" > /proc/sys/vm/min_free_kbytes
echo "0" > /proc/sys/vm/oom_kill_allocating_task;
echo "0" > /proc/sys/vm/panic_on_oom;
echo "0" > /proc/sys/vm/laptop_mode;
echo "0" > /proc/sys/vm/swappiness
echo "50" > /proc/sys/vm/vfs_cache_pressure
echo "90" > /proc/sys/vm/dirty_ratio
echo "70" > /proc/sys/vm/dirty_background_ratio
5 battery tweaks
Code:
echo "500" > /proc/sys/vm/dirty_expire_centisecs
echo "1000" > /proc/sys/vm/dirty_writeback_centisecs
6 removes journalism
Code:
tune2fs -o journal_data_writeback /block/path/to/system
tune2fs -O ^has_journal /block/path/to/system
tune2fs -o journal_data_writeback /block/path/to/cache
tune2fs -O ^has_journal /block/path/to/cache
tune2fs -o journal_data_writeback /block/path/to/data
tune2fs -O ^has_journal /block/path/to/data
7 increases cache size and increases speed
Code:
LOOP=`ls -d /sys/block/loop*`;
RAM=`ls -d /sys/block/ram*`;
MMC=`ls -d /sys/block/mmc*`;
for j in $LOOP $RAM
do
echo "0" > $j/queue/rotational;
echo "2048" > $j/queue/read_ahead_kb;
done
8 SD card speed tweak
Code:
echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb;
9 Defrags database files
Code:
for i in \
`find /data -iname "*.db"`
do \
sqlite3 $i 'VACUUM;';
done
10 Ondemand governor
Code:
SAMPLING_RATE=$(busybox expr `cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency` \* 750 / 1000)
echo 95 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo $SAMPLING_RATE > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
11 Governor Best: Minmax , SavagedZen , Smoothass , Smartass, Interactive
Code:
echo "governor-name-here" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
12 Move dalvik-cache to cache partition
Code:
CACHESIZE=$(df -k /cache | tail -n1 | tr -s ' ' | cut -d ' ' -f2)
if [ $CACHESIZE -gt 80000 ]
then
echo "Large cache detected, moving dalvik-cache to /cache"
if [ ! -d /cache/dalvik-cache ]
then
busybox rm -rf /cache/dalvik-cache /data/dalvik-cache
mkdir /cache/dalvik-cache /data/dalvik-cache
fi
busybox chown 1000:1000 /cache/dalvik-cache
busybox chmod 0771 /cache/dalvik-cache
# bind mount dalvik-cache so we can still boot without the sdcard
busybox mount -o bind /cache/dalvik-cache /data/dalvik-cache
busybox chown 1000:1000 /data/dalvik-cache
busybox chmod 0771 /data/dalvik-cache
else
echo "Small cache detected, dalvik-cache will remain on /data"
fi
13 Disable normalize sleeper
Code:
mount -t debugfs none /sys/kernel/debug
echo NO_NORMALIZED_SLEEPER > /sys/kernel/debug/sched_features
Other tweaks (not build.prop,init.d)​
1 v6 supercharger
Code:
http://forum.xda-developers.com/attachment.php?attachmentid=591730&d=1305000576
Credit- zeppelinrox
2 Use CyanogenMOD's APN list file (fully , for every operator)
Its in system>etc
3 Use uot kitchen for Theming your rom
Code:
http://uot.dakra.lt/
4 Never use Task killer............
please hit thanks and comment if you like this guide....if using in Rom proper credits to this guide!

SM-T230NU - Generate .config used by a running a kernel

Is it possible to create a new kernel config file used by the running kernel for the SM-T230NU? If so, what are the steps to create one? The reason I am asking is I want to use the .config file to create a Kernel module. The module is LiME.ko and it is used to acquire the tablet's memory image which I use for forensic analysis. The challenge is that default Samsung Kernels/ROM's do not appear to come with a kernel .config file.
Your help is appreciated.
Thanks,
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-T230
-> arch/arm/config
https://github.com/GalaxyTab4/andro...h/arm/configs/pxa1088_degaswifi_eur_defconfig
-> my GitHub
checking for ikconfig
->
Code:
#!/bin/sh
# ----------------------------------------------------------------------
# extract-ikconfig - Extract the .config file from a kernel image
#
# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
#
# The obscure use of the "tr" filter is to work around older versions of
# "grep" that report the byte offset of the line instead of the pattern.
#
# (c) 2009,2010 **** Streefland <****@streefland.net>
# Licensed under the terms of the GNU General Public License.
# ----------------------------------------------------------------------
cf1='IKCFG_ST\037\213\010'
cf2='0123456789'
dump_config()
{
if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
then
pos=${pos%%:*}
tail -c+$(($pos+8)) "$1" | zcat > $tmp1 2> /dev/null
if [ $? != 1 ]
then # exit status must be 0 or 2 (trailing garbage warning)
cat $tmp1
exit 0
fi
fi
}
try_decompress()
{
for pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"`
do
pos=${pos%%:*}
tail -c+$pos "$img" | $3 > $tmp2 2> /dev/null
dump_config $tmp2
done
}
# Check invocation:
me=${0##*/}
img=$1
if [ $# -ne 1 -o ! -s "$img" ]
then
echo "Usage: $me <kernel-image>" >&2
exit 2
fi
# Prepare temp files:
tmp1=/tmp/ikconfig$$.1
tmp2=/tmp/ikconfig$$.2
trap "rm -f $tmp1 $tmp2" 0
# Initial attempt for uncompressed images or objects:
dump_config "$img"
# That didn't work, so retry after decompression.
try_decompress '\037\213\010' xy gunzip
try_decompress '\3757zXZ\000' abcde unxz
try_decompress 'BZh' xy bunzip2
try_decompress '\135\0\0\0' xxx unlzma
try_decompress '\211\114\132' xy 'lzop -d'
try_decompress '\002\041\114\030' xyy 'lz4 -d -l'
# Bail out:
echo "$me: Cannot find kernel config." >&2
exit 1
Thank you for getting back to me. You have been very helpful. I have a related question. How do I install the kernel I downloaded from the opensource.samsung site to my SM-T230NU?
I have created a kernel .config file from the downloaded kernel from the link you provided and subsequently generated a zImage file but I do not know how to create the ramdisk and boot.img. I tried installing the kernel using AnyKernel and Heimdall but it fails. Can you provide guidance or a tutorial on how to do this? I would rather not install a ROM. Only the kernel.
I really appreciate the help.
sub77 said:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-T230
-> arch/arm/config
https://github.com/GalaxyTab4/andro...h/arm/configs/pxa1088_degaswifi_eur_defconfig
-> my GitHub
checking for ikconfig
->
Code:
#!/bin/sh
# ----------------------------------------------------------------------
# extract-ikconfig - Extract the .config file from a kernel image
#
# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
#
# The obscure use of the "tr" filter is to work around older versions of
# "grep" that report the byte offset of the line instead of the pattern.
#
# (c) 2009,2010 **** Streefland <****@streefland.net>
# Licensed under the terms of the GNU General Public License.
# ----------------------------------------------------------------------
cf1='IKCFG_ST\037\213\010'
cf2='0123456789'
dump_config()
{
if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
then
pos=${pos%%:*}
tail -c+$(($pos+8)) "$1" | zcat > $tmp1 2> /dev/null
if [ $? != 1 ]
then # exit status must be 0 or 2 (trailing garbage warning)
cat $tmp1
exit 0
fi
fi
}
try_decompress()
{
for pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"`
do
pos=${pos%%:*}
tail -c+$pos "$img" | $3 > $tmp2 2> /dev/null
dump_config $tmp2
done
}
# Check invocation:
me=${0##*/}
img=$1
if [ $# -ne 1 -o ! -s "$img" ]
then
echo "Usage: $me <kernel-image>" >&2
exit 2
fi
# Prepare temp files:
tmp1=/tmp/ikconfig$$.1
tmp2=/tmp/ikconfig$$.2
trap "rm -f $tmp1 $tmp2" 0
# Initial attempt for uncompressed images or objects:
dump_config "$img"
# That didn't work, so retry after decompression.
try_decompress '\037\213\010' xy gunzip
try_decompress '\3757zXZ\000' abcde unxz
try_decompress 'BZh' xy bunzip2
try_decompress '\135\0\0\0' xxx unlzma
try_decompress '\211\114\132' xy 'lzop -d'
try_decompress '\002\041\114\030' xyy 'lz4 -d -l'
# Bail out:
echo "$me: Cannot find kernel config." >&2
exit 1
Click to expand...
Click to collapse

Categories

Resources