Hi guys,
First, please excuse my for my bad english ^^
I bought an Archos 101 IT last saturday. Yesterday, by chance I found a method to root (permanent root) the original Archos firmware (v2.3.26). I don't know how but it work fine ! Here's what I do on the tablet since l bought it :
- Start up the tablet
- Install SDE (Angstrom)
- Install UrukDroid 1.5 (easy method)
- Install openAOS
After install openAOS, UrukDroid wouldn't start and Original Archos Firmware to. So I try an Adroid reset in the recovery menu. When I tried to start Android
it work and it was rooted !
A video come soon, when I'll come back at home.
Hey,
First i want say welcome to the archos community here!
But unfortunality i have to disappoint you: this "exploit" is known
And i really dont see any cause for doing it... you need SDE so you void your warranty, and if you do this you just can install urukdroid what do you say about this guys?
We "need" a way to root the official firmware without sd (like with Archangel) for these people who doesnt want to use urukdroid (i really dont understand them)
Greets
Lenn
Related
Well this is my very first post/thread on XDA so hello all
I have been told to visit this site if I need help so, here I am.
Okay so I have just signed up for a contract which includes the HTC Wildfire. I want to update it to 2.2 (comes with 2.1 if I'm not mistaken)
I have read up as much as I can but it all really means mumble jumble to me. Anyway I have been told (by a friend) that I must first root the 2.1 and then download the 2.2 and put it in a recovery file. It this correctt?
If so how do you root a phone? Do you just download a file and run it? Also what is the best one to use because I have been reading up and there seem to be an awful lot of different ones.
Now I need to update it to 2.2, how? Is it a case of downloading a file and running it on the phone or what?
Also does any of this void the warranty on the phone?
What are the advantages of going this whole rout rather than just pushing the update button and letting the phone update it's self to 2.2? (Is it just so you can download paid apps for free or is there more?)
Thanks in advance guys
Mikrouwel
if you don't know which version you get, it's a bit early to ask question, as if its a wildfire froyo with hboot ver. 1.01 you already updated. And can't root it as yet.
If it's a wildfire eclair with hboot ver 0.8 you root it and put on a special ruu img file that doesn't change the hboot 0.8 to 1.01.
But ofcource this you've would already have known if you had searched the forums.
Sorry to say so, this is also my first post on xda, but i've been able to read and search......
Firstly, it seems your basic concepts are all muddled. There's no method which you will use which allows you to install "Paid Apps for Free". I have no idea where you heard it, but, to do that, you don't need 2.2, or any special ROM.
Secondly, there are two methods to get 2.2:
1: The official route: This is the route which you think will allow you to download paid apps for free (i.e. by simply clicking update on the OTA Notification). Although nothing of that sort happens. Anyway, back on point, if you do this, you will officially get froyo 2.2, but, most of the features of froyo will be disabled (eg: JIT), and, you will not be able to root your phone, and, in this process, install root apps, custom ROM's etc.
2: The unofficial way - In this, you will have to root your phone and put a Custom ROM. The advantages are many fold - You can get a ROM to your own liking, which is fast and free of bloat, and, customize it exactly to your liking, apart from many additional features like true Apps2SD, Live Wallpapers, Ability to completely backup, overclock and underclock your phone etc. Further, you can even get Android 2.3.2 Gingerbread, if you wish
Obviously, now, it is upto you which method you take, but, if you want to learn to root and install Custom ROM's, refer this guide, and just read it completely:
http://forum.xda-developers.com/showthread.php?t=824396
Okay thanks very much
Mikrouwel
Hi all i'm new with the rooting thing and i was curiouse if its possible to root the e310 (acer liquid mini). Witouth losing possibillitys like camcorder and other stuff i just want to use some apps that work only with rooted phones like making the sound loader and all apps to sd and stuff like that.
If anyone could help me?
Sorry for my bad English
Up ! I would like to know how to root my new E310 ?
I rooted my liquid mini with SuperOneClick 1.7
SEE HERE
SuperOneClick v1.9.1 works 100%
thanks it worked!
Ok, so i had an optimus one, but this is completley different so please help...or point me to some help pages and stuff
I bought an HTC DESIRE HD , as i notice is rooted, it has RCMixHD 6.0.0.1(android 2.3.3 Sense 2.1) ,
kernel V2.6.35.10 - [email protected] march 29
So :
What do i need to install a new ROM ?
I read something about some radio vers, what up with that??
And if i find something else to ask, i will write here !
Thanks in advance , sorry for being a noob
reading is fundamental. i researched HTC phones months before i bought one(came from blackberry). after i got my DHD i stumbled across "rooting". so i did months of research before i rooted my phone. i still feel like im a noob because im still learning and finding new things out. my point is...you should do the research and not expect people to feed you the answers you are looking for. im not trying to be a ****. just shedding some enlightenment.
sent from the Penh.
Yep, no one can click a button and make you learn things like that.
Check the how to threads in the subforum "Desire HD Android Development".
Everything you need is there.
Read, read, read.
well i have experience in android , had 3 devices before but htc devices are a little diff . since my device is rooted , just needed some small steps to move around here
OK ! at least please tell me if can safely update RIL ... i have an older vers and how i can install android revolution ROM
THX!
Start here:
http://forum.xda-developers.com/showthread.php?t=841076&highlight=clockwork
See point number 3 (last lines in the first post), to check if you have ClockWorkMod Recovery installed (you probably have). Do it anyway, to update to new version, if it's the case.
You will flash your roms through ClockWorkMod Recovery.
To reach it, shutdown your phone. Then hold the volume down key and press the ON button (top one). You're in bootloader mode. Choose recovery from the menu, using the volume keys and the On/Off button to confirm.
You will boot into ClockWorkMod Recovery. To install a rom, you would already have downloaded the file in the developer's thread and copy the zip file to the root of the sdcard. Don't mess with the zip.
From the ClockWorkMod Recovery menu, choose install zip from card.
To install radios:
http://forum.xda-developers.com/showthread.php?t=1040986&highlight=radio
http://forum.xda-developers.com/showthread.php?t=896597&highlight=radio
thx joooeee !!! so i found out that my phone is ENG s-off ! that is some work not needed to do by me!
About the RIL, you will only need it if the rom has Sense. No Sense roms don't need it.
And you need to match the RIL to the Radio version installed.
ok so despite what you said, i managed to learn some stuff , i updated radio and RIL
and i have the phone for 3 hours
thx jooooe ! you really helped
Nice. You are ready to become a rom flasher addict.
yeaaah ) and the thing is that this phone has a loooooooooooot of roms ) boston and LG optimus one had few ...and those few are buggy
L.E - flashed 1st ROM ) i haaaaaaaa
As stated everything you need to know is already posted in the forums. Calling your self a noob doesn't excuse you not doing your research before opening a new thread. Come on really? No matter the device there are stickies for them all with all the info a new flasher needs to get started.
Thread closed
Hi
Is it possible to root packardbell liberty tab g100w version 3.2.1 ?
Thanks
up. please
Up for me too.
I tested the A500 root for 3.2.1 but gives this 'RED-error' message:
"Please download the newer image for the upgrade."
Current image version: PB_G100W_4.010.03_COM_GEN3
New image version: Acer_A500_1.016.05_COM_GEN1
Note: when using EUUs_PB_G100W_1.007.03_COM_GEN1.exe
(It's oficial EUU program for flashing PB_G100) found elsewhere ...
It doesn't gives me this message, so I suppose it's able to downgrade the firmware version??? ( I didn't go further ....)
Any advice?
up merci
hi, I've also got the g100, i followed the instructions in this video to root.
hope this helps
https://www.youtube.com/watch?v=zfSPP8UOn78&feature=youtube_gdata_player
thanks for that
@Hervé
Hello.
I found this on French forums:
http://forum.frandroid.com/topic/94265-tuto-votre-a500-ou-501-ne-start-plus-voila-lultime-solution/
I have tested it , AND now I am With an ACER ROM 3.01, ready to go further with ROOTIng and upgrading to ICS...
Hope this can help you!
big thanks. I look
PB Liberty Tab
I have a PB Liberty Tab and see many refers to the Acer when rooting... Isnt there a clean "PB Liberty Tab rooting" thread/site around?
No, but the Liberty Tab is from hardware side identical with the A500. So there is no need for a separate Liberty tab thread.
With best regards, maris
Going nuclear. Softbricked Liberty Tablet q100w
Greetings XDA,
Can't find a way to post a new thread so i'll try my luck here.
I'm really close to bashing this tablet to peaces...
I've tried a lot of stuff but i'm kinda a noob for this. Have a softbricked Liberty Tablet q100w and i can't do anything to unbrick it. Just stays stuck on ACER logo and that's it. Tried the all the basic stuff that i could find around here but i'm all out of ideas.
Can someone please post a guide with WORKING links to the stuff i need to fix this damned tablet?
Where ever i go, "expired, non existing domain, this file doesn't exists, etc.." (can't enable USB debugging and download stuff to the tablet since it's bricked)
Thank you in advance,
Bumping in the name of science
Hello Xda forum Members,
I'm writing couse everything is changing so fast and i don't want to make any mistake...
i just bought U8800 and i think its rly good Smarthphone.
Would any of U be that kind and help me with this mobile.
My android version is 2.2.2, stock everything.
I have Windows 7 laptop and Windows 8 on PC.
What i want ?
I want in safest possible way do all things to my device runs smoother and faster also without any bugs and locks.
Can someone explain exactly withs is best way to recover root and clockwork my mobile also how can i make it run 1ghz and I want install AuroraSP.
i found few ways to root device but don't wanna rush it thats why I'm asking someone much more experienced
what should i do 1st and last to be happy owner of working android with AuroraSP inside. ( or other if thats bad )
please send working links for download.
thanks for help cheers
here you go..
Wicio0 said:
Hello Xda forum Members,
I'm writing couse everything is changing so fast and i don't want to make any mistake...
i just bought U8800 and i think its rly good Smarthphone.
Would any of U be that kind and help me with this mobile.
My android version is 2.2.2, stock everything.
I have Windows 7 laptop and Windows 8 on PC.
What i want ?
I want in safest possible way do all things to my device runs smoother and faster also without any bugs and locks.
Can someone explain exactly withs is best way to recover root and clockwork my mobile also how can i make it run 1ghz and I want install AuroraSP.
i found few ways to root device but don't wanna rush it thats why I'm asking someone much more experienced
what should i do 1st and last to be happy owner of working android with AuroraSP inside. ( or other if thats bad )
please send working links for download.
thanks for help cheers
Click to expand...
Click to collapse
for rooting on froyo.. i think you can use an app called z4root.. i think its on playstore not sure..if not try too google and find it.
upgrade to gingerbread
http://forum.xda-developers.com/showthread.php?t=1369296
after upgrade to gingerbread...rooting etc
http://forum.xda-developers.com/showthread.php?t=1420728
I would recommend that after rooting and installing a custom recovery (ClockworkMod) you should make a full nandroid(complete OS + data) backup and keep it safe on your pc or sd card before you do anything else.
once you have are rooted have a custom recovery.. and a nandroid backup you are ready!..
remember.. when flashing ROMS.. check the baseband..which means.. if you are on gingerbread ROM.. official or otherwise.. you can flash any gingerbread ROM.. if you want to flash a ROM based on ICS.. you should get on ICS baseband.. for that you need to upgrade to official ICS.. then you can flash whatever ICS ROM you want..
as for flashing instructions... the ROM builder will have included that.. so read it.
Hope i helped!
Thank u
I'll do exactly what u said wish me luck to not broke my device
thank u,
also huawey link with soft 528 is Chinese i cant understand Chinese
newest I found on hauwey side is 526, should I install 526 or 528?
when i tried to download SuperOneClick v2.3.3 it download some other exe file, is that right ?
it would be nice to Add Sticky topic to forum with everythin workin and updated like my post but Im not able to do it couse Im a bit newbie if it comes in android.
what tha
- Some phone gets imei=0 (please backup your imei)
with official upgrade ... da f?
is there any way to get fully working auroraSP on huawey or its russian rullete ?
step by step ... ;/
finally
I managed to do it with Forumber2 help (thanks Again)
OK I installed b526 from internal then I installed b518 from internal then +/- volume and power pressd long till pink ... connect to pc change image recovery.img to TWR 2.6, then I made backup, next step was put zip file with auroraSP on internal ... then wipe andwanced dalvik cache data ... wiped ... install zip choose .zip
all Fine thanks anyone helpd me