Related
Hello Everybody,
Let me start off by saying that this is the worst phone I've ever used. I had great expectations from this phone but never mind - I'm going to stick to my Excalibur.
This is the first time in my life that i actually bricked a phone. I installed a couple of cooked ROMs and everything went fine. I have experience with CID Unlocking and flashing ROMs. Anyways, all I did was try to flash back to the original Rogers ROM from the Original Shipped ROMS thread and that's when my phone got bricked.
I have searched and done everything possible so far and NOTHING WORKS!
So far I've done this:
1) I have tried flashing the Chinese ROM/Dopod WWE Asia ROM as their official HTC ROM's.
2) Done a hard reset
3) Loads into Boot Loader and the boot loader version is
IPL - 2.21.0002
SPL - 2.21.0000
4) Ran MTTY and i got gsecuritylevel=FF (which means install shipped ROM)
5) Tried running USPL but no luck
6) Tried installing Rogers ROM from the original shipped ROMS thread, still no luck as it gets to 3% and reboots
I seriously don't know what else to do. This is just ANNOYING!! Ive been sitting here for the past 4-5 hours trying to get this damn thing to work.
Is there a way to downgrade the SPL so I could flash a ROM?
Is there a free permanent CID Unock available?
Is there ANY WAY out there to unbrick a Rogers HTC TOUCH
(DAMN ROGERS !!!)
Finally, I'm trying the SD Card ROM Update method and hoping it works.
Mods, if you see this and know of a way to help me out, please do or anyone else who knows what to do so my life is back to normal, please help. Thanks in advance.
EDIT: Ok, I tried the SD Card method, it says Checking SD Card Contents and nothing happened, all i see is a tri color screen. The SD Card is 2 GB, is the only file present on the card and it was renamed accordingly (the .nbh file).
Please help as I'm going nuts trying to fix this.
Best Regards,
lukybandit
Anyone at all?
I've done all the searching I could and everything I've tried so far has failed on me.
I can get into the bootloader, get into the hard reset and even can run a mtty session and no matter what I do, it gets stuck at the HTC logo.
In addition to this, all ROM's that I have tried so far keep getting the Error 270 (Obviously due to not being able to even temporarily CID unlocking it).
I did notice a lot of people have bricked their devices and I figure if i can get into the boot loader screen then at least SOMETHING can be done.
Here is what i have learned.
I have the Rogers Touch, and i said SCREW IT, and going to pick up an AT&T Tilt.. I already have 2 S621's, 1 Tytn 2, and i need another phone for my dad.
I had the touch for 1 week and had the same problem as you. Here is what i gather.
1. YOU CANNOT - install the original ROM if you flashed the incorrect ROM
2. Because there is no HARD SPL, i used the USPL, which on reset will result in a CID relock.
3. In this condition, the only way to reflash if you can't get back into the regular today screen is a custom SPL, by Olipro or something.
But Olipro (i keep forgetting his name), charges 75 GBP which equates to $160CDN or so. I bought my HTC Touch used for $200CDN. Makes no sense to fix it. So i am going to try and sell this phone to someone who wants to fix it for cheap.
Sorry man, i looked EVERYWHERE for a fix, and there was NONE to be found, unless you use this guy , who has succesfully fixed everyone elses phone.
Honestly, if my phone was worth alot more than $200, i would pay him with no issue, but because the fix is the same as buying the same phone again, it makes no sense.
Are you serious?!!!
So there's no way for me to fix this piece of ****? frig man.
I paid for this and now I can't fix it?
Can Rogers find out that I tried playing around with the phone or not? I hope not because It's been only 3 days since I got this and it's been barely used.
If there's a fix, please let me know.
That's not even worth it. If there's someone out there that can fix it, please help - Thanks
P.S: Thanks for your response.
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
http://forum.xda-developers.com/showthread.php?t=347700
treid that?
Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
Yes, I think I did do a hard reset but I will try again in 5 mins. It was a bad flash cause it stopped in the middle I think.
Yup Both SD Card & SIM Card Removed.
Im guessing the only way I could fix this would be - get the original shipped ROM but so far I was only able to find a dump and not an actual update installer.
My SPL & USPL is 2.21 - So what do you recommend. upgrading the SPL and then trying to re-flash..
Would the TMobile ROM work because my phones Rogers branded and no Canada does not have the Vogue.
In answer to your question, it doesn`t go more than 2-3 % and then gives me an Update Error (270)
ahhh...this is driving me insane.
Thanks so much for the help so far. Really hope you guys can help me out here.
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
I just performed a hard reset and tried reflashing but still no luck. It gets to 3% then reboots.
In regards to what you attached, how do I go about doing it? Let me know. I downloaded the 2.26 SPL and the NL ROM.
Noonski said:
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Click to expand...
Click to collapse
Original SPL being Rogers (Can't find it anywhere except a dump)?
k I'll try flashing the SPL 1.11
- Any other thoughts, bro? Thanks!
Did u tried SD card flashing??
Yeah, I did.
I tried the .nbh from the Rogers Dump and it says Invalid Certificate. I tried this other .nbh which said Dead_Elfin, still no luck and the Dopod Asia
I'm so mad/upset and I've tried so many methods to fix it. Is there no way I can get the Rogers dump to work in any way?
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
kokotas said:
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
Click to expand...
Click to collapse
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
lukybandit said:
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
Click to expand...
Click to collapse
EDIT: Didn't work, updates to 3% then reboots. Just Great !!! This is so annoying.
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
yeah, i meant the dumped Roger's ROM.
This is the most annoying thing I've ever had to deal with in terms of owning all my phones. I am selling this phone or returning it back the moment I fix it.
And I'd threaten but he hasn't done anything lol
I hope he does help me out.
Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
i think its time we make it clear to everybody that XDA means SHARING to help everyone out and not to ask for money in return for something. XDA should only be for those ppl who can work hard for everyone without asking for money.
This phone was the biggest mistake I ever made in my life. I'm sick and tired of this already and I still haven't been able to get it fixed.
LukyBandit
I tried everything that these guys told you to do, NOTHING WORKS.
We have an operator branded device and do not have an ORIGINAL ROM to load in other than a DUMP.
Thats why we are stuck.
I am looking for someone local GTA that might charge less, but yes your TOUCH is fukked unless you are willing to pay OLIPRO $160CDN to fix a phone thats worth $200ish.
I am buying a TILT today, its not worth the stupid touch to fix.
What a waste of money that was. I am so happy my TYTN2 and my soon to purchase TILT has a HARD SPL to it.
my friend owns an 8525 and all of a sudden it stopped working (cant make/recieve calls and text messages). i tried doing a hard reset and it didnt work. he called att and the tech guy told him that his phone needs to reinstall the rom, which also didnt work. he bought a new phone and gave me the hermes so that i can play around with it. i tried installing wm6 on it and at 15% the update stopped.. and the phone reset itself. now.. it doesnt have a rom installed and keeps on going to the tricolor screen. i tried the unbrick method (in the wiki) several times and still no luck. it keeps telling me that i dont have enough ram but the booting still wont start. what are my other options for fixing this?... my kaiser was bricked before and i did the unbrick method for that and it work.. i havent tried that yet but is there any chance that it will work..?..
he doesnt need the phone anymore but hes hoping that itll be fixed so he can use it as a backup phone.. so.. yea.. any other ideas for ressurecting an old friend?
thanks!!
Sounds like the radio rom is dead.... Whats the SPL? You have a chance if it has Hard SPL installed - should say SPL - 2.10 olipro.
If so, try flashing a stock rom first, then a radio only rom. If you get no love, flash a cooked rom on it. I'd do it using the sd card method.
It should work as a PDA if you can't flash the radio, but its a brick cos no more phone calls...
If he doesn't want that, he could sell it on ebay for spare parts...
Cheers...
I just went through a similar situation last night. I am running dvh_79's v16 (build 19965.1.2.3) Lite. I added his HTC Today Plugin from the sdauto zip file but didn't like how the Today plugin slowed down my phone, so I uninstalled it and that's when my radio took a dump.
I used the instructions in the Hard SPL forum post #116 to unbrick it using the same rom and radio .nbh files and it went off without a hitch.
The first thing anyone should flash onto their phone is Hard SPL v7. Even before any skins. It won't make you 100% safe from bricks, but I'm damn glad I had it on there this morning while I was reinstalling my phone.
BTW ultramag69, I saw a lot of posts by you in various threads talking about unbricking a phone, and correct me if I am wrong, but if I have olipro 2.10 SPL on my phone (which I do), is it possible to initiate an install of a ROM image without being able to successfully boot the OS on the phone? Does Olipro automatically look for HERMIMG.nbh on the SD card? That was a point of confusion for me at first until I ran the HARDSPPL.exe file, but then again my phone didn't brick to the point I couldn't boot the OS.
What are the choices if you cannot boot OS? Are there any that can be performed from the bootloader itself?
Thanks.
well.. i did the kaiser unbrick procedure.. the mtty thingy.. it kinda worked. after that i installed the dopod wm6 rom... it handled the wm6 well---for a while.. after booting, the phone would turn off by itself (w/ 100% battery of course) or even restart itself..
sometimes it will stay on and be "fully functional" (w/o the calling and messaging still...) but somehow freezes when i look at the device information, specifically in the page where it displays the imei (which is missing btw...)..
the "phone" function doesnt work either, as it doesnt show the dialer.. and then after a few minutes, the phone finally freezes...
idk why this happens.. i tried installing other roms but the rom update always freezes. i tried 4 different roms already... so i had to do the mtty thing again...
(i have hardspl installed)
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
akosiryan, it sounds like you may have a corrupted radio rom. This is not gonna make you happy but this is ,at this point, almost 100% unbrickable. You could try to flash a radio only rom - no os, just the radio - but if it gets stuck and you've tried the stock rom then it looks like its a permanent brick...
You should be able to use as a PDA if you don't play with the phone functions though...
Just as a last shot, you could always use MTTY to check for bad blocks BUT this requires you to downgrade the SPL to 1.10 olipro to fix if you do. Please note though that sometimes the carrier does give you a couple of bad blocks to "brand" it as theirs...
Best of luck.
ultramag69 said:
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
Click to expand...
Click to collapse
Thanks ultramag69! I am indeed running olipro 2.10 on my phone so it makes me feel better knowing that if I can get the nbh on the card, then I can flash the ROM that way.
oh well.. me and my friend decided to sell his phone on ebay or sumthin..lol.. so its not a problem.. ill try to do one last step tho.. like flashing the radio only rom to see if itll work.. but i dont really care anymore.. lol.
No problem... If the Ebay from where you're from is like Aussie ebay, you should get approximately 1/2 to 2/3 the price that the working models go for. Generally the price goes up about 6 hours before the end of the auction with the price skyroketing in the last 10 mins... I'd probably give it a few days on Ebay to make sure people see it....
If you do get the radio rom working, Hermes (jasjam/dopod 838 pro) go for about $250 - $350Aud in Oz.
Cheers...
ok then! thanks
Hi im sorry i had to post this as its probably been asked over and over but ive searched forum and cant seem to find a working solution for me.
I updated my HTC Touch ELF with Onyx ROM after updating SPL etc and everything went fine but couldnt get a signal etc on phone so decided to go back to old rom that i made a backup of untill i had done more research and found the ROM i wanted.
Reflashed the backup rom build i made everything looked good untill i went to boot and it just powered off after the orange brand logo.
I cant do the goldcard method as i have no other phone that can take the card i do however have a adapter for my pc for the card.
Ive treid the ubrick thread but cant get mtty.exe to use usb port.
Can somebody help me out to get this up and going again, Sorry for posting this i know its probably been asked many times but cant seem to get it going and am a n00b on this subject really.
thnx.
[EDIT]
Just managed to get that unbricking rom installed and booted so am gunna try and flash my original dump again.
[EDIE2]
Seems it some problem with my original backup as just doesnt boot after brand logo, When building with HTC Rom tool other files are green but OS file stays black does that mean the OS file is bad?
the adapter for ur card wont work, u need a WM device to make the goldcard method.
what about this: http://forum.xda-developers.com/showthread.php?t=446242
crapula512 said:
the adapter for ur card wont work, u need a WM device to make the goldcard method.
what about this: http://forum.xda-developers.com/showthread.php?t=446242
Click to expand...
Click to collapse
yeah thnx that did the job
Cant seem to get my original dump back on though
I originally just wanted to update to windows 6.1 but there isnt a official update can you recommend the best/most stable unofficial one to use?
take a look at onyx, tess, touch hd or aether. and if u feel brave, u can try letama which is WM 6.5 beta
tried the onyx and another but cant find network just keeps "searching..."
what radio do u have? try with 3.34 or 3.39
Thnx, Just noticed the updates and are going to update and retry.
thnx for help, appreciate it
Do they have them updates for the ELF, can only find those versions for ELFIN.
[EDIT] nm Noticed they are for either
Still having trouble with signal always searching, Installed latest radio version aswell.
[EDIT] whoops what a dumbass, I missed the pin entry at beginning which sometimes pops up but then boots into today screen if not enetered in time, finds signal straight away now
Hello.
This is my first post, so please be kind to me!
I've spent the past few weeks trying to get my head around what to do in order to flash my HD2 which is on the t_mobile network
The original rom 1.43 i think is driving me crazy and I now dont care if I change the rom and it invalidates the warenty!
In order to HSPL I need to SPL first, but will my device allow this?
I've read through so many threads that I am completely confused and dont know which way to turn, never mind which thread to re-read.
Can someone point me to the sspl, HSPL to upgrade to 1.66
Thanks
Glyn
oh its the 512 version
you are over confusing yourself.
download hspl 2
instal it - choose whichever hspl you like (may as well go for 2.08.hspl)
flash whatever rom you like from usb. (don't forget to flash a compatible radio either before or straight after.)
Thanks for your reply......
so downloan the HSPL from here?
'forum.xda-developers.com/showthread.php?t=609477'
and as I run the program I'll get the option of which version to install?
What should I look for to make sure that the radio is compatible with the rom?
Thanks again and sorry for my ignorance
Glyn
best thing you can do is to read a lot. No need to do enerything in one mad dash.
get HSPL2 from HERE - end of the first post (but read the post, dont just skip to download, )
run it as administrator (right click, run as administrator)
for best results use a usb port on the back of your PC (i.e one directly on teh motherboard, not an external usb slot) it will ask what version you want to install. just go for 2.08.hspl (not 2.08.0000) and let it do its thing. the authors say you should match the version to the rom (so 1.43.hspl for roms that are 1.43 or 1.48, 1.66.HSPL for 1.6 based roms, etc, but it isn't critical, most will run on any HSPL, so dont go changing every time you flash a new rom, no need. If it doesnt work then change it.)
As for radio tips, a radio with .51. in the number, (eg 2.09.51.03) will NOT work with any rom that has the 576meg ram, enabled.
If you flash a rom and all you get when you restart is a grey screen, chances are the radio doesnt match. Boot to bootloader and flash the radio.
But most of all, read stuff.
What about shipped rom's that are .exe files? Do they include radios with it? Also, is there a post you can point me to that has a list of compatible radios with different rom's?
that's where reading comes in. the whole process has so many variants that there is no simple "a b c" that covers everything.
yes the exe includes radio (and also spl if you use sd card to flash -stay away from sd card, use usb and if anything goes wrong you just boot to bootloader and re flash)
the chefs give you all the infoyou need in the first couple of posts. the sticky threads in the rom development section will tell you how to do everything, and any problem you encounter has beenwritten about already. so read,search and read.
I suggest you flash Stock WWE 1.66 ROM first so you can have a feel of how much improvement
has been done from 1.43
you can download it in HTC website.
Thanks for your help so far..
I would like to go for the 1.66 official ROM first, so I'll find that on here first and find the exe file so I dont have to mess about with compatible radio's.
Just before I HSPL it, I would like a copy of the original 1.43 T-Mobile ROM, so better get searching.
Thanks again
Glyn
the original 1.43 T-Mobile ROM is on HTCs website so get it from there as a backup
THANKYOU!!
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Chivalryyyy said:
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Click to expand...
Click to collapse
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
RE: Please Help
rockthebus said:
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
Click to expand...
Click to collapse
Hi Guys
Can you help me...
How do i back up the phone before adding HSPL?
is this neccesary and where do i get the stock rom copy from.
i got the phone this week and hate it in its present form... can't even watch youtube.
looking to update to avoid sending back
Regards
mkhonat
re:
samsamuel said:
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
Click to expand...
Click to collapse
Hi samsamuel,
Sorry to msg you like this.
i have purchased a T mobile HTC HD2 which came with the stock 1.43 ROM.
I want to put 1.66 on but don't know how.
I've read the forum and looked on youtube but confused.
Do you have an idiots guide?... i really am an idiot when it comes to stuff like this!
I have downloaded HSPL2 file.
I have downloaded the back up 1.43 Stock Rom
Do i need to download the 1.66 ROM now and how do i update?
please excuse my ignorance and i am happy to donate if you can help.
Kind regards
Mkhonat
RE:
Hi Samsamuel,
Thanks.. just one more thing.
Saw on youtube that i have to format my SC card
youtube.com/watch?v=nrmlqrfCvas[/url]
is this so and is this referring to the sd card in the HTC or my own sd card used to download the 1.66 onto?
regards
mkhonat
PS. why won't this forum allow me to send you a PM?.. i can't send any msg's at all.
Hi, I'm completely lost I'm also a Noob I haven't flashed a rom since I owned a HTC vogue which was a very long time ago and I can imagine it isn't the same.
My mom's HD2 is running wp7 I don't know the name of it but it don't work too good no market, she can't get texts because of a space issue and apparently she can't set up her internet for Simple mobile..
Now we're stuck she loves wp7 so we found a Tiger rom but we get an error every time (something about sd card init)?
She wants either WP7 (working) or Android
So far we have
Magldr 13
HSPL or whatever and a 5.51 radio
and I cannot figure out if we can even flash a rom because everything says 2.08 and I don't want to brick her only phone.
We are super lost I saw the noob video and yes I am I noob but I just want her phone working by tonight shes in school and I don't know a thing about Flashing and I don't understand none of this I have a Samsung Infuse.
Help us please I searched all on google about going from Wp7 to android and I could not get my answer.
I would THANK anyone who offers some kinda help tonight.
You should try this ROM. I use it on my HD2 and it's really good. It's updatable via Zune or via cab sender.
What you need to know about WP7 is that the type of SD card you're using matters a lot. It can give you all kinds of problems.
Do some reading on that thread and have a go at it. So long as you've got HSPL 2.8 and magldr installed, you should not be able to easily brick the phone.
EDIT: as is my usual, I forgot to put the link in.
http://forum.xda-developers.com/showthread.php?t=1236027
Abyykinns said:
Hi, I'm completely lost I'm also a Noob I haven't flashed a rom since I owned a HTC vogue which was a very long time ago and I can imagine it isn't the same.
My mom's HD2 is running wp7 I don't know the name of it but it don't work too good no market, she can't get texts because of a space issue and apparently she can't set up her internet for Simple mobile..
Now we're stuck she loves wp7 so we found a Tiger rom but we get an error every time (something about sd card init)?
She wants either WP7 (working) or Android
So far we have
Magldr 13
HSPL or whatever and a 5.51 radio
and I cannot figure out if we can even flash a rom because everything says 2.08 and I don't want to brick her only phone.
We are super lost I saw the noob video and yes I am I noob but I just want her phone working by tonight shes in school and I don't know a thing about Flashing and I don't understand none of this I have a Samsung Infuse.
Help us please I searched all on google about going from Wp7 to android and I could not get my answer.
I would THANK anyone who offers some kinda help tonight.
Click to expand...
Click to collapse
Sounds to me like somebody has been messing with moms phone and screwed it up
Mate...there are so many posts on flashing what and in what order in this section alone it is pretty pointless me typing them out again.
But in direct response to the issues you mentioned.
SD card . You need to make sure your SD card is clean and formatted (FAT 32)before you flash a WP7 rom. Unlike other phone OS's , WP7 has to have a good working SD card in order to work.
As many members (including me) have recommended in the past. The best starting point is to TASK29 it (wipe) and install an original WP6.5 rom first.
That way you can make sure all the hardware is working properely.
Then go download all the software you need ( HSPL 2.08, MAGDLR, Radio, Rom of choice) Plenty of links scattered all over this forum.
And remember to always hard reset your phone after you have flashed the ROM !!! Not doing this can give all kinds of grief.
Your moms market place probably isnt working because the phone isnt activated with micro soft. Loads of threads on activation. take a few mins to read them.
There are other markets ( for apps) that don't require activation. Some roms included them "in" the ROM.
Good luck
Abyykinns said:
Hi, I'm completely lost I'm also a Noob I haven't flashed a rom since I owned a HTC vogue which was a very long time ago and I can imagine it isn't the same.
My mom's HD2 is running wp7 I don't know the name of it but it don't work too good no market, she can't get texts because of a space issue and apparently she can't set up her internet for Simple mobile..
Now we're stuck she loves wp7 so we found a Tiger rom but we get an error every time (something about sd card init)?
She wants either WP7 (working) or Android
So far we have
Magldr 13
HSPL or whatever and a 5.51 radio
and I cannot figure out if we can even flash a rom because everything says 2.08 and I don't want to brick her only phone.
We are super lost I saw the noob video and yes I am I noob but I just want her phone working by tonight shes in school and I don't know a thing about Flashing and I don't understand none of this I have a Samsung Infuse.
Help us please I searched all on google about going from Wp7 to android and I could not get my answer.
I would THANK anyone who offers some kinda help tonight.
Click to expand...
Click to collapse
First of all read the 'how to' links in my signature. Secondly, sounds like whoever installed wp7 on the phone never entered the required activation code to access marketplace from the phone with a windows live id.
Thirdly, sounds like you have Yuki/XBmod's ROM. This ROM locks the SD card for security in case of a lost phone. Go the WP7 development forum and read the first post in both Back To The Future thread and the companion SP1 threads to learn about how to unlock the SD card. Or the other path is to use a new SD card.
You can either install Yuki/XBmod again which is the current version of WP7 Mango v8107. If you don't want to worry about locking SD issues try flashing one of the other ROMs. I've tried Pjad..something's ROM and.it's pretty stable even with the beta v8773. I've heard good things about HD2O's ROM too.
The thing about Yuki/XBmod ROM is it is updatable via Microsoft update. The other's are updatable unless you flash again and setting up your phone from scratch everytime. The only other ROM I know of that is updatable like Yuki's is the HD2O ROM.
It's up to you which you choose.
As for setting up for Simple...there is a new updated cab that has Simple setups for you to use. I think that once you install Connection Setup from the HTC Marketplace it'll have the setup you need regardless of which ROM.
Also, read the General Questions forum for information on obtaining a WP7 activation code.
I would recommend the real MS Marketplace for relatively less risky WP7 apps....so get an activation code. It's not difficult.