{NOTE: This is just something I saved for myself for future reference, when I do a friend's phone. Thought someone might find it useful, so I'm sharing.}
accessories from amazon- bumper and screen protector, extended battery
----------------------------------------------------------------
1) charge to 100%
2) root with Unrevoked
3) update everything from the market
4) Titanium backup everything
5) use an sms backup app to save to gmail
6) install rom manager and clockwork mod
7) download rom (cyanogenmod or miui) to sd card
8) download incredikernel to sd card (with voltage tweaks and fast charge zips)
9) download v6 supercharger script to sd card
10) download 98kickasskernel tweaks script to sd card
11) download 3gbooster script to sd card
12) boot into recovery
13) nandroid backup
14) factory reset device and wipe cache and dalvik cache
15) install cyanogenmod or miui zip
16) boot into ROM
17) boot into recovery and wipe cache and dalvik cache
18) install incredikernel
19) boot into ROM and install v6supercharger, 98kickasskernel, and 3gbooster scripts
20) boot into recovery, install voltage tweaks, and fast charge zips
21) boot into ROM and charge
22) reinstall apps and data from titanium
23) install ROM Toolbox to fix boot image, block ads, fix permissions, and wipe battery stats
ROM kit:
apk:
a) titanium backup pro
b) ROM toolbox pro
zip:
c) ROM
d) incredikernel
e) voltage tweaks
f) fast charge
script:
g) v6supercharger
h) 98kickasskernel
i) 3gbooster
References:
a,b) email/torrentz.eu
c) respective websites
d,e,f) incredikernel.com
g,h,i) http://rootzwiki.com/showthread.php...rger-And-98KickAssKernelTweaks-By-Zeppelinrox
2) unrevoked.com
5) market
19)
i) install script manager from the market
ii) go into settings and select “browse as root”
iii) create the folder system/etc/init.d
iv) run v6supercharger, 3gbooster, and 98kickasskernel with “run as root” selected
v) in the init.d folder, open 99supercharge.sh and 98kickasskernel and select “run as root” and “run at boot” and save
http://rootzwiki.com/showthread.php...rger-And-98KickAssKernelTweaks-By-Zeppelinrox
23) fully charge phone, then wipe battery stats, unplug phone, let die, fully charge
advanced: http://forum.xda-developers.com/showpost.php?p=11803458&postcount=10
---------- Post added at 11:29 PM ---------- Previous post was at 11:22 PM ----------
This is just my step-by-step for bringing a phone from stock to good condition.
The "ROM kit" part, is what I have saved to put on the SD card of the phone, preferably not in a folder
Wow a lot of things
Related
Im posting this since its vital for development,just quoting lickonn from the modaco thread:
"This is my recovery image for Acer Liquid !
I build it for my own use, but i'm sure it can also help you !
Rebuild and modified with my own stuff from Cyanogen's sources. Thanks for this great job Cyanogen !
Update : 0.3.1
- fix a small bug on app2sd partition in recovery mode
Update : 0.3
- improved speed of functions
Update : 0.2
- Auto fsck on /dev/block/mmcblk0p1 and /dev/block/mmcblk0p2
- reboot after a wipe
- fix some little bugs
Features of my recovery are :
- update rom with update.zip system (update.zip, or other, in root of sdcard)
- nandroid backup (note : a bug can loop the backup/restoration. Please remove the usb cable before launching the backup/restore, and plug it again after backup/restore)
- nandroid restore (note : a bug can loop the backup/restoration. Please remove the usb cable before launching the backup/restore, and plug it again after backup/restore)
- mount/umount sdcard
- enable/disable root on current system
- split SD for app2sd (be carrefull ! this will erase all you sdcard, include nandroid backup...PLEASE BACKUP YOUR SDCARD BEFORE)
- move app2sd ! (you must use lickonn rom to use it) (you can delete /data/app.back and /data/app-private.back after)
- fix uid
- wipe data (include app2sd data) - auto reboot after wipe
- wipe only dalvik cache (usefull sometimes)
- copy the recovery log to your sdcard
Included :
- Busybox 1.15
- ADB root
- Nandroid Mobile
- SDParted
- Fix permissions script by Cyanogen
- APP2SD script from Cyanogen
- Parted
- Sqlite
A small screenshot from ddms :
Reduced 60%
Attached Image
480 x 800 (8.33K)
How to use it ?
- Put your device in bootloader mode
- Extract the recovery image
- Flash the recovery.img file : fastboot -i 0x0502 flash recovery recovery.img "
- Reboot in recovery mode
Download in original thread
http://android.modaco.com/content/a...om/299060/06-01-0-3-1-lickonn-recovery-image/
Hi All
This Mod based on [NIGHTLY][ROM][GRH78C] CyanogenMod 7 for vendor Bravo (HTC Desire GSM) and Ultimate Online Theme Kitchen
This Mod change only Battery icon
You need to flash Valid ROM !!!
Make a Full Backup before you flash the Mod !!!
Process:
- Backup
- Flash valid ROM
- Flash ClockworkMod recovery
- Reboot normal, system must be boot and work
- Reboot in recovery
- Clear Dalvik cache (auto cleared during the flash this mod, if is in /data/dalvik-cache)
- Flash Mod
- Reboot normal
HOWTO self-made valid Mod
- Download ROM
- Extract system\framework\framework-res.apk
- Open Ultimate Online Theme Kitchen
- Cooke you theme, upload framework-res.apk and wait...
- After cooking download UOT-xx-xx-xx-xx-xx-x.zip
If you use old version ClockworkMod recovery, you can flash this file:
- Backup
- Flash ROM
- Reboot normal, system must be boot and work
- Reboot in recovery
- Clear Dalvik cache
- Flash Mod
- Reboot normal
If you use new version ClockworkMod recovery, you must do the following:
- Install Subsystem for UNIX-based Applications
- Download CM7_battery_mod_auto_build.rar and extract it
- Copy UOT-xx-xx-xx-xx-xx-x.zip to CM7_battery_mod_auto_build folder
- goto CM7_battery_mod_auto_build folder
- run in command line "auto_build.cmd UOT-xx-xx-xx-xx-xx-x.zip"
or
replase in auto_build.cmd: "set filename=%1" to "set filename=UOT-xx-xx-xx-xx-xx-x.zip" and run it
- Backup
- Flash ROM
- Reboot normal, system must be boot and work
- Reboot in recovery
- Clear Dalvik cache (auto cleared during the flash this mod, if is in /data/dalvik-cache)
- Flash Mod
- Reboot normal
################################################################################################
BOOT LOOP fix, check instruction
bravo_CM7_Battery_Circle_Percentage_Mod_signed_UOT-ZC-02-09-08-55-1.zip - valid to cm_bravo_full-31
Instruction:
1.You need to upgrade to Android 2.3.3, please follow this instruction: http://droidangel.blogspot.com/2011/05/how-to-flash-updateupgrade-samsung_12.html
(If you already upgraded please go to step no.2) choose the one without bootloader.
2.Then time to root it: http://droidangel.blogspot.com/2011/05/procedure-how-to-root-samsung-galaxy.html
(If you already root, go to step no. 3).
3.Flash overcome kernel via Odin by go into download mode: http://www.ziddu.com/download/17518780/002001-Overcome_Kernel_v4.0.0.zip.html
(Do not choose re-partition on Odin) and check how much space do you have in the internal storage (not the total size of your tab).
4.Download the official MIUI http://forum.xda-developers.com/showthread.php?t=1324528
5.Put it into your SD card
6.Boot into recovery mode by press the power button and select Reboot -> Recovery.
7.Wipe data, wipe cache. Go to advance wipe dalvik cache.
8.Install Zip from SD card, select the MIUI zip file that you just download. Choose install it.
9.Reboot your Tap.
10.After that boot into recovery again and install this file: http://ubuntuone.com/7NUVkI862sTvgu5A14bbJk
11.Use ES File Explorer / Root Explorer to delete DroidSanArabic & Hebrew then reboot
12.Install Multiling Keyboard and Khmer plugin from Android Market.
That’s it!!!
Make sure you have System Space at least 1.3Gb. Otherwise you have to redo it again and again.
Use FriendCaster app for Facebook and CM7 Camera (http://www.mediafire.com/?czzy0o2u571ex8y) instead of Stock MIUI.
If you don’t have internal storage you will loss all your app every time you reboot!
Warning:
I hold no responsibility at all. Do it at your own risk!
Make sure you back up, before you flash anything!
DesignerEvo v0.5, a customized stock rom for the HTC Evo Design 4G!
Visit the original announcement / discussion thread on SDX-Developers here.
Based on the stock HTC build 2.12.651.5 / Android 2.3.4 / HTC Sense 3.0, and baked using the Android Kitchen 0.184 by dsixda (http://forum.xda-developers.com/showthread.php?t=633246).
My goal was to create something that would be more useful for me, but figured other people might be able to benefit from it as well!
Important note: If you want to Factory Reset this ROM, you should reinstall the DesignerEvo-update.zip immediately after performing the reset to restore content to the /data partition. Otherwise there will be a number of preinstalled things missing.
Current Release:
DesignerEvo v0.5 (MD5SUM 71088007ee3da6d2baaf83a113e48f44)
Download here: http://d-h.st/C0I
Old Releases:
DesignerEvo v0.4
Redacted due to Wifi issues
DesignerEvo v0.3 (MD5SUM a0dd61849533fb64d887d6cb1e400cbb)
Download here: http://d-h.st/11i
DesignerEvo v0.2 (MD5SUM 00359825fee03c49007634213ebab901)
Download here: http://d-h.st/b0t
DesignerEvo v0.1 (MD5SUM 44d081019e2fe69dcf416eced88f9448)
Download here: http://d-h.st/gy023lstrxw9
Changelog:
Version 0.5:
Based on HTC RUU 2.12.651.5
Now install boot animation to /data/local/bootanimation.zip so you can easily override it if you want (via symlinks to /system)!
New DesignerEvo boot animation from Dysgenic! http://forum.xda-developers.com/showthread.php?t=905538
Backed out this change in 0.5 since it broke WiFi: Use busybox instead of toolbox for common utilities, gives a bit better functionality on things like ls and friends (colors!)
Version 0.4:
Redacted due to WiFi issues
Version 0.3:
Based on HTC RUU 2.12.651.5
Upgraded version of Android Wifi Tether to 3.1 Beta11 (IMPORTANT: Be sure to enable MSS clamping + Routing Fix in the Wifi Tether settings, otherwise tethering won't work on 3G!).
Added in HTC Radio apps + widget per user request!
Added back in Polaris Office (lets you open MS Office files, and won't run properly when installed to /data, needs to be in /system).
Resoled issue with lockscreen shortcuts and widgets on a Factory Reset.
Updated versions of Amazon Appstore + all other Play-updateable apps.
Added UOT Kitchen battery guage with battery percentage shown.
Modified statusbar to display 1x for 1xRTT data when not in a 3G area.
Using the same boot.img from DesignerEvo-0.2, note that if you don't install the correct boot.img, your WiFi and many other things will NOT WORK CORRECTLY!!! If you have already flashed 0.2, you don't have to re-flash for 0.3 though! People coming from stock and 0.1 should flash the 0.2 boot image (included in this download).
Version 0.2:
Based on HTC RUU 2.12.651.5
Downgraded to Android Wifi Tether v3.0.7 update9 since it is more stable on the Design 4G. You can still upgrade to newer versions, but this is the one that seemed to work the best.
Version 0.1:
Based on HTC RUU 1.19.651.0
Stock kernel 2.6.35.10 with initrd tweak
Debloated (Sprint / HTC stock apps removed, many can be re-downloaded from the Market)
Deodexed
Zip-aligned
/data/app enabled to allow easy removal of stock applications
/etc/init.d scripts enabled (busybox run-parts)
Disabled OTA updates in build.prop (FOTA settings)
Many updated stock applications, moved to /data/app to allow for uninstall / market updates
(Console) Applications added:
Bash shell (default)
BusyBox v1.19.3
Nano text editor
(Android) Applications added:
(Downgraded) EPST from the Evo 4G allowing applying custom PRLs on-demand (##PRL#)
Superuser 3.0.7
Android Wifi Tether v3.1 beta6
Amazon Appstore
EStrong's File Explorer
Ookla Speed Test
How to flash (note that if you have not yet done a HTC Bootloader Unlock, this will perform a factory reset on your phone!!! Be very sure that this is what you want! If you have rooted without unlocking, I highly recommend downloading Titanium Backup to perform a full backup of all your apps and data first!):
Enable USB Debugging on your android phone (http://www.groovypost.com/howto/mobile/how-to-enable-usb-debugging-android-phone/)
Get adb / fastboot working (needed to unlock and flash boot.img)
Windows: http://www.umnet.com/mobile-blogs/321-AndroidADBFastboot_Easy_5_minute_setup_(Great_for_nOObs)
Mac/Linux: Install the Android SDK from Google and then download fastboot from here: http://koushikdutta.blurryfox.com/G1/
Perform a HTC Bootloader Unlock on your HTC Evo Design 4G (makes use of fastboot installed in step 2): http://htcdev.com/bootloader
Reboot into the bootloader (adb reboot bootloader) to access fastboot (or pull your battery, and re-insert it, then immediately hold down Power and VolDown until the white HTC HBOOT screen appears).
Run all following steps in the directory where you've decompressed DesignEvo-0.1.zip:
Run "fastboot flash recovery recovery-unofficial-cwm-5.0.2.7.img" (credit goes to 2fast4u88 on XDA: http://forum.xda-developers.com/showthread.php?p=20444019)
Alternatively, flash any other Evo Design 4G Recovery image (the unofficial TWRP build is also known to work)
Run "fastboot flash boot DesignerEvo-0.1-boot.img"
Now recovery and boot will be flashed. On your phone, select "BOOTLOADER" using VolUp/Down and Power to select.
Press VolDown to select RECOVERY (might take a few seconds to scan your SDCard first) and press Power to select.
You should now be booted into 2FS CWM-based Recovery v5.0.2.7.
Now would be a good time to make a nandroid backup of all your stock partitions! The nandroid backup plus the stock-boot.img I include in my download zip will get you back to a factory flash if necessary. (More info on nandroid: http://forum.xda-developers.com/showthread.php?t=1186090)
Run "adb shell mount sdcard" to mount your SDCARD on the phone. Nothing should be returned (if success).
Run "adb push DesignerEvo-0.X-update.zip /sdcard/DesignerEvo-0.X-update.zip" to copy the update.zip image to your sdcard.
Once the push is successful, choose "install zip from sdcard" (again using VolUp/Down/Power).
It will likely take about five minutes to copy. Be patient
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "DesignerEvo-0.1-update.zip" (probably near the bottom)
Select "Yes - Install DesignerEvo-0.X-update.zip"
After about 5 minutes, you should see "Install from sdcard complete"
You can now select "+++Go Back+++", and should wipe your Cache and Dalvik Cache before proceeding.
Finally, choose "reboot system now"
Your phone should now reboot into DesignerEvo. Verify by navigating to Settings->About phone->Software information->Software number!
Regards-
hofopds
Reserved...
Reserving slot 2...
My device Stock in USPM and no way that i can turn it off.
here is some ways i read in different threads.
charge 100%
use different launcher
wipe cache
wipe dalvik
and more i don't want to bored you with them.
here is solution i came up with and it solved my problem without lose anything
Requirement:
TWRP recovery
1. reboot to recovery (TWRP)
2. Advanced - File manager
-- look into system\app
-- and change every "emergency " Folder name or
-- or simply rename apk file and delete extension
3. reboot (this is how you get color and full setting)
4. setting - app manager - reset app preference (this is how your all apps working without losing any data (only if you disabled some apps this will enabled them again))
5. reboot to recovery
6. Restore apk files that renamed
7. reboot
8. disable UPSM
9. reboot
and it's done