Hello everyone
I have a serious problem here, was about to give up on the phone but there seems to be some hope out of this mess.
Okay, I was doing a task 29 through HSPL4.exe when it stuck up at 24% and gave Rom update error, (details read something like there has been a communication error etc.). The phone screen showed the Rom update failure screen , when I reset the phone it doesn't power up at all. No bootloader, no vibrations or LEDs, nothing.
Only, when I press the red (end call/ power) button and then press volume up for some time, the phone vibrates twice and the green LED lights up, thats it, the screen remains blank.. When I connect it to USB, my PC detects it, but asks for a driver that I don't seem to have, although I do have Activesync installed (i'm using XP).
Please somebody, get me out of this mess, I'd be so grateful.. Thank you.
Did you try booting into that one screen, forgot its name
....the rainbow screen
do u have hd2 toolkit? btw...if you can get into your bootloader there is definitly hope. long live hd2!!!!!!
I am having the same issue however mine came about when my hd2 got wet after that all it does is vibrate once and nothing happens the LED comes up for like a sec and nothing else happens...
Yeah, it doesn't go to the bootloader when I press the vol down button. But it is detected by my computer when I connect it to USB, isn't there a way it could be recovered thru there somehow?
okay so i left my phone sitting for a while and now it vibrates the bottom buttons turn on when i touch them and the led is in orange and my computer recognizes it too but no display at all....
Related
Hi!
I've flashed my phone quite a few times and now I can't get pass the tri color boot up screen. It all started when I started to use task29 for my flashing. Wasn't the first time I used it but the last time I did the phone just ended up with (what it seems like no rom). When I press the power button the phone loads the tri color screen saying serial or USB (if USB connected) I've tried to reflash with both SD-card and USB but it ends up the same way. Flashing reaches 100% (tried stock rom and others) but when booting up it still goes to the tri color screen.
Using SPL 1.56 OliNex.
Hopefully somewould knows what to do. Big thanks!
looks to me like your volume down button may be stuck in, see if it is and what happens after that
Hi. Well the volume button is stuck but it usually works by pressing the power button a couple of sec. now that doesn't work
sabio said:
Hi. Well the volume button is stuck but it usually works by pressing the power button a couple of sec. now that doesn't work
Click to expand...
Click to collapse
then you need to unstick the button, it will never boot properly otherwise.
hello,
i've got a hd2 from a friend it do's nothing when you hit the power button
the screen stays black and it keeps on vibrating (no pause just a long vibrate)
reset button at the back does not react
battery out for 2 day's does not work
i can't get in to the bootloader menu
My pc does not recognize this phone
any help?
Check the battery pins at the back of your phone make sure they are straight.
Hy i have HTC Wildfire not rooted or flashed.Today i accidently dropped it on the floor and it turned off when i tried to power it on it vibrated once and looked like its still shut down.Tried Volume up and power on LED turns green phone vibrates 3 times and nothing looks like its shut down just led is still green
when i use volume down and power it vibrates and does nothing.First i suspected screen broke but then once only once out of 100 times i managed to get it in that volume down+power menu but it didn't react to anything so i took battery out and tried it again and i could never get into that menu agian.Is there a way to save my phone cuz its out of warranty its quite old
Thansk
BlackWW said:
Hy i have HTC Wildfire not rooted or flashed.Today i accidently dropped it on the floor and it turned off when i tried to power it on it vibrated once and looked like its still shut down.Tried Volume up and power on LED turns green phone vibrates 3 times and nothing looks like its shut down just led is still green
when i use volume down and power it vibrates and does nothing.First i suspected screen broke but then once only once out of 100 times i managed to get it in that volume down+power menu but it didn't react to anything so i took battery out and tried it again and i could never get into that menu agian.Is there a way to save my phone cuz its out of warranty its quite old
Thansk
Click to expand...
Click to collapse
Try connecting your phone to your computer and sending adb reboot recovery or adb reboot bootloader through cmd with the drivers installed.
sounds like your device has managed to get into qualcomm diagnostic mode. not sure how to get out of it but use the search bar and see what you can come up with. good luck
This might help, but download different Wildfire-specific firmware, not the one mentioned in the post. I'll have a look to see what they want.
I looked at the forums and all over google today for more than 6 hours trying to fix the phone to no avail. Basicly what happened, my phone froze after was droped and after restarting throu power button it got stuck on boot loop. So i dowloaded Huawei P9 Lite VNS-L31 model firmware and tried to instal throu SD card with volume up/down and power button option. It didnt work i got error message saying that it cant update becouse software doesnt comply with this version. And after that my phone went down. It is now completely unresponsive. Screen is black and a red light is on all the time ( not flashing ). Put it in charger no images appear. Try to press power button for 10 seconds. Red lamp dissappears for a second and comes back and no response from the phone, screen still black and no vibrations or sounds. Can access any of volume down or up power button menus. Its like the phone is dead but only the red lamp is on. Any idead whats wrong with the phone? Now i cant even try to wipe the phone or install new software couse it just doesnt despond only the red light turns off for a second when holding the power button for some time and comes on and no response from the phone.
Hey, I have the same problem. Did you manage to find the solution to it?
Hello. My phone does not boot. I did no modification to the software and i was using it just as a daily driver. When i press the power button the notification led lights up red-green-green and loops 3 times. When i connect it to my pc i see "㌲㔴㜶㤸" in the device manager. Key combinations like power on+ volume up or down does nothing. I already checked out this thread but did not help (https://forum.xda-developers.com/p8lite/help/huawei-p8-blinks-red-green-green-red-t3546038). I only need to get my data out of the phone. I don't care if it works again or not. How can i access my data? Thank you.