Related
Hi all,
I just installed a fresh copy of win7 ultimate on my HTC shift and installed all drivers because the old install was getting sluggish. Everything works except for two things: interpolated high resolution gives a blue screen crash when aero is active (no transparency) and the windows basic theme is UGLY. And the second problem: after I install like 85 windows updates shag control center crashes and have to restore a system recovery point. Do you know what update causes this so i can hide it and install the rest?
Many thanks,
Pelle
pelle.jansen said:
Hi all,
I just installed a fresh copy of win7 ultimate on my HTC shift and installed all drivers because the old install was getting sluggish. Everything works except for two things: interpolated high resolution gives a blue screen crash when aero is active (no transparency) and the windows basic theme is UGLY. And the second problem: after I install like 85 windows updates shag control center crashes and have to restore a system recovery point. Do you know what update causes this so i can hide it and install the rest?
Many thanks,
Pelle
Click to expand...
Click to collapse
Which drivers did you use? I hope you are not using the Windows Vista drivers. Download the Shift Windows 7 drivers from this link http://azsharing.com/yvex8pwmz01j/SHIFT.zip.html. Install the Windows 7 drivers discussed in this thread http://forum.xda-developers.com/showthread.php?t=590009. The sequence of installing them is precise including those that you need to install in Vista Compatibility mode and with Admin Privilleges. As the OP stated some of the drivers will be installed through Windows update but check which ones. Follow the recomendations in that thread and all will work like a charm...
I believe your Shag Control problems and all display problems are related to the drivers and not Windows update. Mine is on automatic updates and I have not excluded any updates at all save for the Language Pack that I do not need....
Re-install the drivers and lets see what happens after that. By the way DO NOT ENABLE AERO BEFORE INSTALLING THE GRAPHICS DRIVERS otherwise you get BSOD....... That advice is shown as Important in the thread mentioned above. Enable aero theme as the last thing you do with all drivers installed to avoid any problems.
I hope you get sorted and enjoy your Shift with Windows 7......
Edit>>>> There is a way to disable Aero when facing your current BSOd situation through Screen Resolution Settings but I dont remember the precise steps. I can retrace the steps on my Shift once I get to it after work and see whether that will help you. But let me know whether re-installing the drivers will have sorted you out>>>>>
Hello,
I used the driver sequence at gadgetmix (sorry, i can't post links yet) because it worked fine a year ago and the drivers from the HTC website in vista compatibility mode and run as administrator.
With reinstalling do you mean that I have to uninstall the old driver and install the new one or can i just install the new driver over the older one?
Thanks
Pelle
EDIT: had aero off the entire installation
pelle.jansen said:
Hello,
I used the driver sequence at gadgetmix (sorry, i can't post links yet) because it worked fine a year ago and the drivers from the HTC website in vista compatibility mode and run as administrator.
With reinstalling do you mean that I have to uninstall the old driver and install the new one or can i just install the new driver over the older one?
Thanks
Pelle
EDIT: had aero off the entire installation
Click to expand...
Click to collapse
Best is to uninstall and then install afresh using Windows 7 drivers..... Perhaps even check box to delete the old driver as well. If Aero was off during installation you dont have many problems. Aero on during 7 upgrade especially before graphics driver update causes Bsod or boot loop.
You should be ok when you install the windows 7 drivers. But the sequence of driver installations is important.... All the best
Have been fiddeling with the drivers for a while now and given up. just started Windows 7 setup again. After that i will use the windows 7! drivers and hope for the best.
Pelle
EDIT: windows just installed. Turning off Aero and starting drivers... Fingers crossed
Drivers just finised and now the sond doesn't work
Tried rolling back/ updating driver, reinstalling driver muting unmuting in windows and shift control center but no luck...
And when I press the resolution changer I have to reboot to switch resolution.
shift control center has to be selected from start menu to start
This is a lot worse than when i did it using the tutorial at gadgetmix
Any idea how to fix this?
pelle.jansen said:
Drivers just finised and now the sond doesn't work
Tried rolling back/ updating driver, reinstalling driver muting unmuting in windows and shift control center but no luck...
And when I press the resolution changer I have to reboot to switch resolution.
shift control center has to be selected from start menu to start
This is a lot worse than when i did it using the tutorial at gadgetmix
Any idea how to fix this?
Click to expand...
Click to collapse
Sorry to hear about the problems you are facing. I am surprised coz I did the Windows 7 installation just a few weeks ago after reviving my dead Shift and everything is working perfectly for me. The only thing I havent fully sorted out is Finger print thing but I know I only need an hour or 2 with it and all will be well.
Incidentally did you do a clean install of 7 or you upgraded Vista?
Since you have just done a fresh install and you dont stand to lose much I would advise that you re-install Vista (F3) which will install all the drivers then Upgrade Windows 7 from the freshly re-installed Vista. You can then install drivers for any device that will show not to be installed after 7 upgrade.... Of course following the sequence and allowing Windows Update to take care of the rest.
PlayStation said:
Sorry to hear about the problems you are facing. I am surprised coz I did the Windows 7 installation just a few weeks ago after reviving my dead Shift and everything is working perfectly for me. The only thing I havent fully sorted out is Finger print thing but I know I only need an hour or 2 with it and all will be well.
Incidentally did you do a clean install of 7 or you upgraded Vista?
Since you have just done a fresh install and you dont stand to lose much I would advise that you re-install Vista (F3) which will install all the drivers then Upgrade Windows 7 from the freshly re-installed Vista. You can then install drivers for any device that will show not to be installed after 7 upgrade.... Of course following the sequence and allowing Windows Update to take care of the rest.
Click to expand...
Click to collapse
The problem is that i once had to replace my HDD because some idiot dropped my shift and for some reason the accelerometer didn't kick in and trashed my hard drive. So pressing F3 won't do anything. Are there any other solutions?
DID IT! It was in my windows 7 install disk. Downloaded and burnt one (it should be legal because I have paid for it) installed, installed drivers an BOOM! everything works! aero, HiRes in aero sound, its nice and responsive battery life on power saver 2H and 45 minutes, havn't tested modem yet as my sim card is in my smartphone but will do that. Thanks a lot for all of your help! I will be hanin round here to help others. I AM SO HAPPY EVERYTHING IS FINE WITH MY LOVELY SHIFT! Updates Sucseeded and everything works perfect!
Only one more question: is it safe to install sp1? Or will that give problems with some of the drivers.
pelle.jansen said:
DID IT! It was in my windows 7 install disk. Downloaded and burnt one (it should be legal because I have paid for it) installed, installed drivers an BOOM! everything works! aero, HiRes in aero sound, its nice and responsive battery life on power saver 2H and 45 minutes, havn't tested modem yet as my sim card is in my smartphone but will do that. Thanks a lot for all of your help! I will be hanin round here to help others. I AM SO HAPPY EVERYTHING IS FINE WITH MY LOVELY SHIFT! Updates Sucseeded and everything works perfect!
Only one more question: is it safe to install sp1? Or will that give problems with some of the drivers.
Click to expand...
Click to collapse
Glad you finally managed to get your Shift up to speed. I always felt that your peculiar issue boiled down to bad install which is confirmed by the first software you used. What type of disk did you use for the Hdd replacement - Hdd or SSd and for what capacity. Been thinking of upgrading but Ssd costs are still up there in teh skies and might not justify upgrading for the ageing Shift....
You can update to Service Pack 1 no problem. I have it and no issues at all.
PlayStation said:
Glad you finally managed to get your Shift up to speed. I always felt that your peculiar issue boiled down to bad install which is confirmed by the first software you used. What type of disk did you use for the Hdd replacement - Hdd or SSd and for what capacity. Been thinking of upgrading but Ssd costs are still up there in teh skies and might not justify upgrading for the ageing Shift....
You can update to Service Pack 1 no problem. I have it and no issues at all.
Click to expand...
Click to collapse
I Bought the exact same drive on ebay for $30 or so. I solved the hard drive light staying on by just running CHKDSK but now the same programs just crash...
It now happens when trying to do a system score, when changing my network to public and when uninstalling a program using control panel. The rest all works fine.
Hi!
I try to install win8 to my htc shift. The setup loads after I remove the sdcard from the card reader. But when I start the install It ask for cd/dvd driver... Obviously the shift don't have one. I read somewhere I need to install my disk controller driver, but when I try to install the intel ICH7 drivers It says It can't find new devices. But the setup process sees my hdd because I can browse for the drivers and there I see my drive with the win7 files. This same error happens on two other PC-s. Whats the matter? Any ideas?
Thanks in advance!
Zsolt
Use 64bit, I had this problem also till I tried 64bit
Thanks, but i think the shift's processor is only supports 32bit.
Bump
+1
having the same problem tried 64 bit, 32 bit and 64 bit developer, all the same
same problem here. Works on other computer with DVD but not with USB for me.
Solved for myself. Installed using DVD rather than USB
Hello,
Just an average XDA noob speaking here. Reason i'm creating this topic is because I'm having problems getting the ADB composite drivers right. Previously I've rooted a HTC Hero without any problems, but with my Huawei U8800 Ideos X5 I just can't fix it, I searched in all corners of the Internet. Below are my specs.
- Android 2.3.5
- Unbranded
I've also tried to root with SuperOneClick and by replacing the boot.img, but I can't get it to work because of the drivers.
When I get to recover mode (the pink/purple screen) it isn't showing me the IMAGE folder on my computer. Also tried to install new drivers for the ADB composite by using the H:/Mobile Partner disk on my phone but that isn't helping either. It says their isn't any new hardware found in the folder, but as you can see on the image, there are still exclamation marks. I Also uninstalled the drivers a few times and tried to re-install them but that isn't working neither. Firstly my phone was recognized as an Other device > Ethernet Controller in the device manager screen. But that was possible to solve by browsing to the H:\MobilePartner\Drivers folder.
By the way, when in recovery mode plugged in the computer, it shows me two drivers called "HUAWEI TECHNOLOGIES". I can't seem to find a good driver for those, they also show the !-mark.
Any help will be appreciated! :good:
The image. www(dot)dropbox(dot)com/s/tn2q2neo5362gd1/screenshot.1.png?m
maybe you can try to install this driver from huawei.. it worked for me..
https://www.box.com/s/ywqomlr1pj1ca4ls0wlm
Drivers
Get the drivers from here
http://forum.xda-developers.com/showthread.php?t=1876457
(if your problem solved click thx)
socioan said:
Get the drivers from here
http://forum.xda-developers.com/showthread.php?t=1876457
(if your problem solved click thx)
Click to expand...
Click to collapse
Sadly the password for the Quallcomm setting is not working :/ 0 and 0000 both didn't. Thanks for your help
@ first poster
Used that driver install, when the phone is connected and has USB Debug on this is the situation, screen: www(dot)dropbox(dot)com/s/y6x0ta8bwp1rqsr/screenshot.2.png
have u tried to uninstall/remove all related driver instances and try to do it afresh?
iamelton said:
have u tried to uninstall/remove all related driver instances and try to do it afresh?
Click to expand...
Click to collapse
What's the best way to do that? Just delete them from the device manager screen and letting them re-install automaticly by the phone? Or just download drivers from the internet and install it manually?
Jordy14 said:
What's the best way to do that? Just delete them from the device manager screen and letting them re-install automaticly by the phone? Or just download drivers from the internet and install it manually?
Click to expand...
Click to collapse
if u r doing manual driver installation, then its best to disallow auto-installation by windows..
delete all instances from device manager, or u may use an application called "USBDeview" to remove the usb drivers.. and i think this second way is probably doing it more cleanly..
iamelton said:
if u r doing manual driver installation, then its best to disallow auto-installation by windows..
delete all instances from device manager, or u may use an application called "USBDeview" to remove the usb drivers.. and i think this second way is probably doing it more cleanly..
Click to expand...
Click to collapse
Thanks man, gonna try that tomorrow after school.
Will keep you updated.
Sorry for the late update, forgot about the topic... I threw away all the drivers, got the pinkpurple screen and connected to my pc. It's now missing this drivers when connected, Windows can't install them itself. Check the printscreen below.
http://i50.tinypic.com/20qyzc0.png
Jordy14 said:
Sorry for the late update, forgot about the topic... I threw away all the drivers, got the pinkpurple screen and connected to my pc. It's now missing this drivers when connected, Windows can't install them itself. Check the printscreen below.
http://i50.tinypic.com/20qyzc0.png
Click to expand...
Click to collapse
this works 100%
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk/Attachments_2012_09_12.html
socioan said:
this works 100%
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk/Attachments_2012_09_12.html
Click to expand...
Click to collapse
Gonna try that out, do I need both?
The first one i have tested and it is for 32 bit win 7
The second one i havent test it it is for 32 and 64 bit win 7
Choose one acording your windows
socioan said:
The first one i have tested and it is for 32 bit win 7
The second one i havent test it it is for 32 and 64 bit win 7
Choose one acording your windows
Click to expand...
Click to collapse
Ok ty, I started over, deleted all the drivers and let Windows install the drivers themself. Still not working. I find it very strange why Android Composite ADB Interface pops up 4 times in the device manager... As you can see, he installed one by himself >> https://(w)(w)w.dropbox.com/s/lttgky3qozhraf9/kak4.png
I'll try your method.
So after flashing the new lollipop update I found myself stuck in a bootloop unable to get into the android operating system at all. I used flashboot and the intel flash tool to try and restore to an older ROM. It forze at 91% with an "error:unable to mount /data" I then used the root tool to try and sideload and install the update.zip from adb shell. No luck. When I rebooted I got to a strange efi menu. Looked around, and it gives me the option to install with with windows?
Anyone have any ideas. I'm waiting for radio shack to open, its the only local place that sells USB otg cables locally.
Here are the photos
njking25 said:
Here are the photos
Click to expand...
Click to collapse
njking25 said:
So after flashing the new lollipop update I found myself stuck in a bootloop unable to get into the android operating system at all. I used flashboot and the intel flash tool to try and restore to an older ROM. It forze at 91% with an "error:unable to mount /data" I then used the root tool to try and sideload and install the update.zip from adb shell. No luck. When I rebooted I got to a strange efi menu. Looked around, and it gives me the option to install with with windows?
Anyone have any ideas. I'm waiting for radio shack to open, its the only local place that sells USB otg cables locally.
Click to expand...
Click to collapse
That is something interesting. It is asking which os to boot to, not install.
I'd like to know how you got into the bios? I am looking for a way to install Linux....
Sent from my YOGA Tablet 2-1050F using Tapatalk
njking25 said:
Here are the photos
Click to expand...
Click to collapse
Did you get this figured out?
I can see "fast boot" enabled. Have You tried to switch it off? any other menu is displayed?
Have You tried to "power+vol down" on it?
I've tried a few ways to get into the BIOS shown... all failed.
Maybe the only way to trigger the BIOS to show is to fully wipe/format the internal storage so the BIOS can't pick up droidboot or anything else. Quite risky though if it isn't the way.
I'm in no way telling anyone to do this and I have not tried it myself. I'd be curious to hear from any advanced users if they have ever completely wiped the internal memory and what options would be available to restore if things did go wrong.
zach181 said:
I've tried a few ways to get into the BIOS shown... all failed.
Maybe the only way to trigger the BIOS to show is to fully wipe/format the internal storage so the BIOS can't pick up droidboot or anything else. Quite risky though if it isn't the way.
I'm in no way telling anyone to do this and I have not tried it myself. I'd be curious to hear from any advanced users if they have ever completely wiped the internal memory and what options would be available to restore if things did go wrong.
Click to expand...
Click to collapse
This guy seems to have stumbled on it also. I flashed the stock kk firmware and I am trying to do it but can't get Lollipop update to work. But it won't boot after it fails so I am reflashing KK again.
http://forum.xda-developers.com/showpost.php?p=60490907&postcount=578
Thanks for the link workdowg,
I'm still trying to work out how they did it. Could do with a step by step and whatever files needed uploaded and linked to. Also the bit about not using windows startup programs.
zach181 said:
Thanks for the link workdowg,
I'm still trying to work out how they did it. Could do with a step by step and whatever files needed uploaded and linked to. Also the bit about not using windows startup programs.
Click to expand...
Click to collapse
If you try it do let me know. I need to get into the bios to get started on a dual boot to Linux on this bad boy...
I will let you know.
I just asked for the OP to clarify a few things before I go ahead. I may try Linux first with Windows 8/10 being the final install.
So... conclusion. we have to damage firmware to boot efi...
If we could swap img file before upload to tab (during this 25 second wait) we could make windows installation possible. Am i right?
zach181 said:
I will let you know.
I just asked for the OP to clarify a few things before I go ahead. I may try Linux first with Windows 8/10 being the final install.
Click to expand...
Click to collapse
@social-design-concepts suggested we should try to change the boot order using efibootmgr. I've been communicating with him. Here is the post in the Venue thread... http://forum.xda-developers.com/show...postcount=2083
Links giving 404
zach181 said:
Links giving 404
Click to expand...
Click to collapse
here it is again... http://forum.xda-developers.com/showpost.php?p=61108700&postcount=2083 it got truncated.
Thanks workdowg.
It seems it's not as clear cut as first thought. Mind you, I didn't expect it to be. I did try a HP keyboard with OTG in Android and that got picked up ok (No lights on keyboard)
I'm a bit in the same mind as Social-Design. I'd rather have a definite way to restore Android from a totally blank internal drive before I have a go. Just up to page 214 in the thread so it may be covered later.
UEFI soft brick?
Hi guys,
I accidentely tried to use the firmware on my 1050 as described in this thread. I can indeed load the UEFI BIOS with all its settings (even though most don't do anything). But unfortunately, I cannot load any OS. I always get the error "EFI Harddrive failed" - meaning it cannot boot fomr hardrive.
I have used an externally powered USB-HUB with mouse, keyboard and USB-Stick and connected to the 1050 via OTG-cable. If the stick is bootabnle with GPT x64 then it will boot from that stick. All 64bit windows versions that I tried failed to install with "ACPI_BIOS_ERROR". 32bit windows would not start, because the GPT is 32bit and the BIOS does not recognise it.
The best success I had so far was to copy a ISO from android-x86 on the usb stick. It will boot in live-mode from the USB. Not so suprisignly, mouse and keyboard are working, touch isn't. WiFI is working and the SD card is detected. I tried to install this version of android on the harddrive which works, but it installs the EFI GRUB bootloader which is not recognised by the BIOS.
I can also access the UEFI shell.
Unfortunately, I am running a bit out of ideas of what to do in order to get a normal system (or firmware) back. ADB-drivers obviously don't work (the Intel SoC driver is installed as well), so I cannot use the Phone Flash Tool.
Any ideas would be greatly appreciated.
Yosha1 said:
Hi guys,
I accidentely tried to use the firmware on my 1050 as described in this thread. I can indeed load the UEFI BIOS with all its settings (even though most don't do anything). But unfortunately, I cannot load any OS. I always get the error "EFI Harddrive failed" - meaning it cannot boot fomr hardrive.
I have used an externally powered USB-HUB with mouse, keyboard and USB-Stick and connected to the 1050 via OTG-cable. If the stick is bootabnle with GPT x64 then it will boot from that stick. All 64bit windows versions that I tried failed to install with "ACPI_BIOS_ERROR". 32bit windows would not start, because the GPT is 32bit and the BIOS does not recognise it.
The best success I had so far was to copy a ISO from android-x86 on the usb stick. It will boot in live-mode from the USB. Not so suprisignly, mouse and keyboard are working, touch isn't. WiFI is working and the SD card is detected. I tried to install this version of android on the harddrive which works, but it installs the EFI GRUB bootloader which is not recognised by the BIOS.
I can also access the UEFI shell.
Unfortunately, I am running a bit out of ideas of what to do in order to get a normal system (or firmware) back. ADB-drivers obviously don't work (the Intel SoC driver is installed as well), so I cannot use the Phone Flash Tool.
Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
You can get it to boot from USB? Get someone with to use tethered twrp and get a backup of the esp and fastboot partitions.
I have 2 things you can try if the goal is getting back to booting stock Android.
Yosha1 said:
The best success I had so far was to copy a ISO from android-x86 on the usb stick. It will boot in live-mode from the USB. Not so suprisignly, mouse and keyboard are working, touch isn't. WiFI is working and the SD card is detected. I tried to install this version of android on the harddrive which works, but it installs the EFI GRUB bootloader which is not recognised by the BIOS.
I can also access the UEFI shell.
Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
Have You tried booting any x64 linux iso from flash drive?
dreamnewbie said:
Have You tried booting any x64 linux iso from flash drive?
Click to expand...
Click to collapse
Thank you for your fast reply.
I just tried that with an Ubuntu Desktop Distro. It boots up from teh USB drive, keyboard and mouse are present. Wifi, sound, touch don't work but I can see the internal Harddrive and the sdcard in the file exsplorer.
Yosha1 said:
Thank you for your fast reply.
I just tried that with an Ubuntu Desktop Distro. It boots up from teh USB drive, keyboard and mouse are present. Wifi, sound, touch don't work but I can see the internal Harddrive and the sdcard in the file exsplorer.
Click to expand...
Click to collapse
extract and dd this to a usb drive and see if it is able to boot it View attachment 3415895 if it successfully boots replace the fastboot.img thats on the thumbrive with one for your devices and see if it boots. if your fastboot.img is named droidboot.img rename it to fastboot.img.
If you can successfully get your devices droidboot/fastboot.img to load you can then disconnect the usb-otg cable and reconnect it to your PC and use the phone flash tools to restore your device completely.
So.. I just installed Phoenix OS on my laptop, using the latest exe file. Once finished, I went on to restart the PC, then, there is a screen / terminal that I can choose between 2 OS, which is my Windows 10 , and Phoenix OS. Picking Windows 10 would boot Windows 10, but when I pick Phoenix OS, it just goes black, then after 5 seconds it just restarts and goes back to the terminal. Reinstalling won't help. Turning off secure boot and fast boot also doesnt work. Please help.
.
If you are wondering if there are any white text or logs that show when I pick an OS on tge terminal, there is, but only when I pick Windows 10, picking phoenix, as I already said, doesn't show anything, just blackness, though I know the laptop is turned on because I can see the brightness, and after 5 seconds, it turns off and turns back on again (restarts)
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
have you tried this or this ?
I haven't tried any of those solution, I will try them out. But I am unsure on how to do the solution where you replace the grub file from ubuntu(?) because I do not have ubuntu and also, i do not have any knowledge about that OS. . Recently, I tried installing Phoenix OS via ISO using a bootable flash drice, and it gives me the same result. When I choose install on harddrive, it just restarts on the terminal, when i try boot directly from usb, it also restarts. Maybe theres some incompatability issues on my hardware?
EDIT: So sorry for not reading the whole thing, the grub files were on the attachements. I feel so dumb
Tried the two solutions, none worked. I will read from that thread and see if i can find any other solutions
Atsukiri said:
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
Click to expand...
Click to collapse
Sorry to say but Phoenix-OS has problems with APU or Radeon graphics ,I was banned when I raise this question on their forum ,try android-x86 ,it should work or bliss-x86
Actually the exact problem happen to My Dual Core PC too.. using NVIDIA GT 210
The answer is simple: Your processor is not supported.
hi guys, I want use Phoenix OS in my laptop with windows 7. but laptop don't asking to me in preloading screen. I was used before time windows 7 and Phoenix OS in this laptop. why I can't install now?
Phoenix os unable to boot
My CPU IS CORE 2 QUAD q6600 2.4GHZ
Phoenix not booting and going back to terminal again and again after detecting phoenix os.....found at /dev/sda3
Doesn't work on my Pentium Dual Core e5500 2.8 GHz
The Lollipop version of Phoenix OS works fine but the Nougat one won't run..
Same problem here.. Did you find any solution of this problem... If you find any solution please help me..
My laptop lenovo AMD E2.
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
Thanks. Everyone tried to make their (old) rig work on Phoenix, I found installing 1.5 worked for me, too bad it is very outdated with the Play service unable to update (Error 910). Do you have any clues what could go wrong?
Thinkpad x100e, AMD NV-40, 4G RAM
I have installed Phoenix Os on a variety of laptop and pc processors, succes install Phoenix Os on Acer A6 and Lenovo A8 with Phoenix ROC : D, sucess installs my PC core 2 duo E7500 with Phoenix Os v1.5 because it only supports sse4.1, and my laptop Lenovo a9 succes install Phoenix OS with a little problem in UEFI bios settings, try to set UEFI to allow access to Boot for Phoenix OS, so if anyone thinks Phoenix OS can't be installed on the AMD processor it is wrong >: |
Same problem
I'm going through same problem.. have you find any solution??? I'm on AMD too
Edit: Problem's with nougat version.. Running Lollipop version successfully
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
nope i worked phoenix on dual core processor