Related
First of all thanks to Amon_RA for this. I had no part in creating this. I am just providing a how to flash it. There may be an eaiser way but this is what worked for me.
First let me say I am on a Mac. If you are on windows the adb commands should work fine but I can't say how to get adb working for you.
1. download flash_image Here Link updated 3/17/10
2. Open the terminal and copy and paste the following commands.
adb shell [hit enter]
su [hit enter]
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system [hit enter]
3. In a new terminal window (don't close the original one).
adb push flash_image /system/bin [hit enter]
exit [hit enter]
4. Now in the original terminal window
chmod 755 /system/bin/flash_image [hit enter]
5. Now exit all termainl windows and reboot your phone.
6. Download Amon_AR's recovery Here.
7. Mount your phones sd card and drop recovery-RA-eris-v1.6.2.img on to it and eject your phone.
8. Open the Terminal and copy and paste the following commands with the phone connected to your computer.
8. adb shell [hit enter]
9. su [hit enter]
10. flash_image recovery /sdcard/recovery-RA-eris-v1.6.2.img
11. To get into recovery turn off you phone and hold the Volume Up + Power until it boots into recovery.
That's it.
I made an automator script the help all of you having problems getting adb working. Make sure you have the android sdk downloaded and named android-sdk Put it in your home folder and then run this script. Let me know how it works for you.
Disclaimer: I am not responsible for any damage you may do to your phone. I am only providing instructions on what worked for me. This is very beta. Good luck. Enjoy the nandroid goodness.
First link is Dead...........
ooopps Srry my bad, Its up.
You should mention that the chmod command is in the original terminal window. Also, you could do it in one window if you put:
adb remount
adb push bla /bla/bla
at the begining of everything.
adb push flash_image to /system/bin
Click to expand...
Click to collapse
I don't think there's a "to" in that command either. lol
testing567 said:
You should mention that the chmod command is in the original terminal window. Also, you could do it in one window if you put:
adb remount
adb push bla /bla/bla
at the begining of everything.
I don't think there's a "to" in that command either. lol
Click to expand...
Click to collapse
Thanks. I don't think the "to" is going to work either. I made the corrections.
Just a quick question. What does this boot too. Im new to all this phone stuff. I did the upgrade to 2.1 leaked so just been searching the forum here each day to see if a solution has come about. i just noticed v.1.6.2 in there so was curious as to what this will do.
Will this put the regular android on it or keep it the same, sorry just kinda getting started with android
coupla questions -
For northmendo:
Is the reboot in the middle of this even necessary? ( flash_image won't work right if /system is still mounted rw ?)
For testing567:
Do all the adb shell commands run as root against the 2.1_root install ... or maybe the above could be simplified even more by just running "adb root" first?
For Austinjs0102 (not a question)
This process only applies (at the moment) to phones with "2.1_root" - there isn't a path at present to go from "2.1_leak" to a rooted phone. Assuming that a way to roll back (or get root) for "2.1_leak" eventually is found, then the answer to your question is this: it is a process to apply a custom recovery partition to the phone that include tools that will allow you to perform complete phone backups and restore operations. This can be critical for devs who are experimenting with writing boot or system partitions to their phones - if something goes wrong with their experiments, they can "boot" their phone into recovery mode and restore back to a working configuration. To reiterate, though: this only applies to phones that are already rooted.
bftb0
Thanks a bunch that helps clear up info.
hopefully the hard working dev's here find a 2.1 leaked fix for us early people, if not then i may need to lose the phone lol.
Austinjs0102 said:
Just a quick question. What does this boot too. Im new to all this phone stuff. I did the upgrade to 2.1 leaked so just been searching the forum here each day to see if a solution has come about. i just noticed v.1.6.2 in there so was curious as to what this will do.
Click to expand...
Click to collapse
I am in same boat as you...
Let me start off by saying that I'm not a phone dev. I've done software development for many years, but never messed with the phone.
Can someone explain why we can't just load the 1.5 rooted PB001IMG.ZIP file over our 2.1 leaked handset? Is it a matter of the version number being lower? If so, since the 1.5 is rooted, couldn't someone just up the version number to whatever the 2.1 leak is plus one? Then, once it's loaded, write a little app to drop the number back where it should be?
TIA for the education.
Doc
DocTauri said:
Let me start off by saying that I'm not a phone dev. I've done software development for many years, but never messed with the phone.
Can someone explain why we can't just load the 1.5 rooted PB001IMG.ZIP file over our 2.1 leaked handset? Is it a matter of the version number being lower? If so, since the 1.5 is rooted, couldn't someone just up the version number to whatever the 2.1 leak is plus one? Then, once it's loaded, write a little app to drop the number back where it should be?
TIA for the education.
Doc
Click to expand...
Click to collapse
(I suppose I shouldn't respond, 'cuz DocTauri is jacking northmendo's thread. Sorry north!)
Doc,
I understand exactly what you are getting at... and also think I can explain why it's not easy.
First - what has been discovered so far was not a "root break-in", but rather an engineering ROM with root "built in". It is cryptographically signed so that a production phone will recognize the .zip file as a valid ROM. That first validation step has nothing to do with version numbers.
If the "SPL" on an unrooted phone was doing something as simple as looking at a couple of bytes in the initial file downloaded to the phone, then yes - doing what you suggest would work... just patch a few bytes using a hex editor. Unfortunately, the phone SPL is quite sophisiticated: it verifies the crypto signature on the entire zip file first, unpacks that zip, and then examines the contents of an individual file within the zip archive (and possibly even unpacks one of the YAFFS image files and then looks in a file within the YAFFS image) to read version numbers.
That means that the fundamental issue is the cryptographic signature on the .zip file. If you do anything which breaks step #1, step #2 (version # checks) are never reached. Certainly an individual file could be byte-patched, and then images and zip files could be re-assembled... but you would have no way to sign the zip with HTC's private key. Or you could even attempt to byte-patch the zip file - but then that would break the crypto signature. Either way, the crypto signature on the zip file is no longer valid.
If you have HTC's private RSA key, let us know!
bftb0
bftb0 said:
coupla questions -
For northmendo:
Is the reboot in the middle of this even necessary? ( flash_image won't work right if /system is still mounted rw ?)
Click to expand...
Click to collapse
I added the reboot because. All I would get is out of memory errors. The reboot fixed that.
e.g.
mtd: read error at 0x001e0000 (Out of memory)
mtd: read error at 0x00200000 (Out of memory)
mtd: read error at 0x00220000 (Out of memory)
mtd: read error at 0x00240000 (Out of memory)
northmendo -
That first link (that you corrected) now points to the recovery image, not "flash_image".
Note that the "flash_image" executable which Amon_RA originally included with his first recovery (.zip) is identical to the /system/bin/flash_image binary which ships on the Eris with 1.5 (1.17.605.1); the md5sum signature (of both of those files) is:
16559f2c27d08ff1ddfcaca05fbf10fb flash_image
That's also the same md5 signature as the "flash_image" file which was posted to dl.dropbox.
I don't have 2.1_root installed on my phone, but if the same binary is already on the phone after installing the 2.1_root ROM, there's no need to include those steps in your instructions. It is also possible that even if the "2.1_root" version of /system/bin/flash_image is different, it would also work.
Note that the only reason I bring it up is that your instructions might be (a) unnecessary, and (b) are encouraging folks to overwrite a binary that is already on the phone. No harm (but unneeded) if it is the same, and unknown harm if it is different.
Also (while I'm at it)
901167f6b5541b488c8e0404bceb0631 recovery-RA-eris-v1.6.2.img ***
It appears to me ( reading between the lines here ) that Amon_RA is trying to improve his v1.6.2 recovery - folks might want to keep an eye on that thread.
An alternative and quicker method than all of this is what zifnab06 suggested here. It's only two lines long, after all.
bftb0
[Edit]***Wow, my post was obsolete the moment I posted it - don't know how I missed Amon_RA's announcement post. Note that there appears to be several versions of "v1.6.2" floating around now - make sure to check his post if you want the most recent.
bftb0 said:
It appears to me ( reading between the lines here ) that Amon_RA is trying to improve his v1.6.2 recovery - folks might want to keep an eye on that thread.
An alternative and quicker method than all of this is what zifnab06 suggested here. It's only two lines long, after all.
bftb0
Click to expand...
Click to collapse
I will keep the link updated to the newest version here. Also I tried the quicker method without success. I will try it again when I get home from work.
Thanks
bftb0 said:
(I suppose I shouldn't respond, 'cuz DocTauri is jacking northmendo's thread. Sorry north!)
Click to expand...
Click to collapse
Sorry, didn't mean to. Understood on the explaination. I didn't realize it was a different rom image, I thought the key had been broken, allowing someone to resign a modified image.
Thanks!
Doc
I used this method and it was all really easy until I got to the end. It just says usage and then sits their and does nothing. I unplugged it and went into recovery and see the android dude and a yellow traiangle and exclamation point. Did I forget something? Is their an alternative way to flashing this?
sdk issues for flashing recovery...
Hey guys,
Im a noob but here's whats going on, Ive downloaded sdk extracted it to my c drive, ive downloaded all the required packages reccomended in the forum, Ive up dated my driver and still my machine doesnt recognize my phone...
Ive also extracted the recovery image to my tools directory and added the the path in enviromentals...
So at this point Im stuck as to how to get my pc (xp) phone and sdk in sync in order to get this recovery image working...So any advice would be highly appreciated. Thanks in advance.
Chris
Spencer_Moore said:
I used this method and it was all really easy until I got to the end. It just says usage and then sits their and does nothing. I unplugged it and went into recovery and see the android dude and a yellow traiangle and exclamation point. Did I forget something? Is their an alternative way to flashing this?
Click to expand...
Click to collapse
You could try this.
If you have your phone pluged in and type in to the terminal
adb reboot recovery [hit enter]
After you phone reboots it should come up with text options to do back-ups and restores. Do you get any of that?
Anyone know the key combo to get into recovery without adb?
having issues getting adb
got the command prompts working in xp, however while trying the methods here in the forum i am getting adb not foud errors. Any suggestions?
Most of this information has been repeated so many times. But I wanted to make a short list of all the silly mistakes and simple oversights I’ve made over time.
(I make mistakes constantly - there are probably some mistakes in this very post - and I usually search around and try to find my way out of them. I will edit this post whenever I run into a problem. If anyone has any input, I will gladly add it to this post.)
YOU CAN NOT COME BACK FROM UNLOCKING YOUR BOOTLOADER:
If you ever think you’ll need to or want to “relock” your bootloader, you can’t.
Alternative root method:
VISIONary
(when you launch the application, you can leave everything unchecked)
Alternative recovery option:
ROM Manager (in the market)
ALWAYS DO A NANDROID/CLOCKWORKMOD BACKUP!
It will restore everything the way you had it if you F something up.
Want to go back to original shipping, but followed this guide, downloaded the linked file and can’t find the image files?
They’re not in that file. I don’t know why. Go here and download FRG33, decompress it and use the contents to follow the tutorial
Are you getting a “verification failed” error when you try to apply an update.zip in recovery?
Mount your SD card to your computer, download whatever file you were trying to apply directly to it (don’t download it and then drag it), and rename it to “update.zip”.
If you’re using Windows, make sure “hide extensions for known file types” is unchecked in your folder options within the Control Panel. You’ll keep having problems if it’s named “update.zip.zip” and you didn’t realize it
If you're still having problems, try this download of the stock FRG83 update.
<Added 11/18> I had another facepalm moment. If you downgraded back to FRG33 and you get an "assert failed" error, flash the recovery.img from that FRG33 package you extracted. (found this solution here)
Did you flash a ROM or go back to stock, start up your phone and noticed that you’re stuck on Edge?
Go to Menu>Settings>Wireless and Networks>Mobile Networks>Network Operators>(choose your carrier), wait.
Trying to copy something from your SD Card to /system/app (for instance)?
If you use the “cat” command, DON’T FORGET THE “>” SYMBOL. Nothing awful happens as far as I know, but it’s unnerving to watch the terminal puke all over itself.
Code:
cat /sdcard/thing.apk > /system/app/thing.apk
If you’re new to Linux and/or Android and are removing apps:
BE CAREFUL with the “rm” command. Once it’s gone, it’s gone.
You can always rename (technically, "move") the files instead:
Code:
mv /system/app/thing.apk /system/app/thing.apk.bak
Switch the commands to get it back
Code:
mv /system/app/thing.apk.bak /system/app/thing.apk
And don't forget to mount /system as read and write. To do that:
Windows: (must have drivers installed, Nexus One drivers are in the SDK)
Code:
adb shell
su
Linux: (no drivers necessary)
Code:
./adb shell
su
Code:
mount -o remount,rw -t yaffs2 /dev/mtdblock3/system /system
Don't forget to mount /system as read-only when you're finished. To do that, use the same code but replace "rw" with "ro" (without quotations of course)
Having trouble connecting with adb?
In Linux, you need to be in the SDK directoy (mine is in ~/AndroidSDK/tools). In Windows, you need to have ;C:\AndroidSDK\tools in the system path, within Environmental Variables (right-click on Computer>Properties>Advanced>Environmental Variables)
Unplug the device
In Linux, cd to ~/AndroidSDK/tools (or whatever you called it) enter:
Code:
sudo ./adb kill-server
sudo ./adb start-server
Plug in the device
Code:
sudo ./adb devices
In Windows:
Code:
adb kill-server
adb start-server
Plug in the device
Code:
adb devices
Device not found?
Did you enable USB Debugging in Menu>Settings>Applications>Development?
Trying to install an .apk but it just won’t work?
Try the “adb install” method, or push the apk to /system/app. If the app force closes or doesn’t work, just remove it
Code:
rm /system/app/thing.apk
Using Ubuntu (or another Linux distro), trying to mount your SD through Amon-Ra's recovery, but it won't mount?
Disable USB-MS toggle, unplug the phone, reboot your computer, try again.
Can I kiss you?
Seriously though I really appreciate it when the guys on here take time out of their day to post helpful guides like this since it prolly took 30 min at least. Thank you very much for doing this it might have been just what I'm looking for
ap3604 said:
Can I kiss you?
Click to expand...
Click to collapse
Nope.
ap3604 said:
Seriously though I really appreciate it when the guys on here take time out of their day to post helpful guides like this since it prolly took 30 min at least. Thank you very much for doing this it might have been just what I'm looking for
Click to expand...
Click to collapse
I'm glad you appreciate it. I'm not technically one of the guys on here. I've been on XDA in different device forums for a little while but have always been absorbing the information and never giving anything back. This is my first try. I can only dream of being a developer when I grow up, and solving more serious problems.
ahorriblemess said:
Want to go back to original shipping, but followed this guide, downloaded the linked file and can’t find the image files?
They’re not in that file. I don’t know why. Go here and download FRG33, decompress it and use the contents to follow the tutorial
Click to expand...
Click to collapse
Just wondering ahorriblemess, I looked over the guide and it says:
"This will do the followings to your Nexus One:
1. Reset your system files to the original system files.
2. Reset your kernel/boot image to the original shipping boot image.
3. Reset your recovery to original recovery (if you wish)."
Since I'm a real idiot... does this guide get your baseband / radio back to original (january) shipping image as well?
I didn't see it in those 3 things and have the 5.12.00.08 version so I wanted to make sure following that guide would reset the radio baseband back to the original (january) version as well before I did it.
Now all I need to do is figure out how fastboot works and I'm gold!
ap3604 said:
Just wondering ahorriblemess, I looked over the guide and it says:
"This will do the followings to your Nexus One:
1. Reset your system files to the original system files.
2. Reset your kernel/boot image to the original shipping boot image.
3. Reset your recovery to original recovery (if you wish)."
Since I'm a real idiot... does this guide get your baseband / radio back to original shipping image as well?
I didn't see it in those 3 things and have the 5.12.00.08 version so I wanted to make sure following that guide would reset the radio baseband back to the original (january) version as well before I did it.
Now all I need to do is figure out how fastboot works and I'm gold!
Click to expand...
Click to collapse
I don't know. I'm in no way an expert at any of this. My intent with this thread was to compile all of the sort of simple things that I've overlooked in the past. Usually I've found solutions to those problems scattered all over the place, so I just thought it would be helpful to put them all in one place in case anyone ever has the same problems I've had.
I have a pretty good feeling about the answer, but I don't want to share it in case you decide to act on it and it's wrong.
Thanks a ton!
Things you need:
Base firmware (i'm use Gingerbread S5830SERKPH 2.3.4)
Windows (I'm use windows 7 X64 service pack 1)
Linux (Ubuntu recommended)
And the last thing is, You need enough experience in android world
step-step :
Flash your phone with your desired base firmware.
Make required modifications at your phone.
After that, do hard reset to your phone.
Next back up system.rfs .
put system.rfs with boot.img, data.rfs, recovery.img from PDA base firmware in one folder.
After that, repack your custom rom.
what should we do to modify it :
Remove useless widgets
Add more apps
Change theme
How to back up System.rfs :
Download at market "terminal emulator"
next run this code:
Code:
su
dd if=/dev/stl12 of=/sdcard/system.rfs
How to hard reset your phone :
Move by root explorer your modification apps to system/app then change permission like this :
Code:
User:Read, Write
group:Read
Others:Read
Next change the owner to "root" by root explorer
At least boot into recovery mode "HOME+POWER" and choose "wipe data/factory reset" be sure your contact data already backup
How to repack your custom rom :
PDA by running this code via terminal at linux:
Code:
tar -H ustar -c boot.img recovery.img data.rfs system.rfs >> ROMNAME.tar
md5sum -t ROMNAME.tar >> ROMNAME.tar
mv ROMNAME.tar ROMNAME.tar.md5
change ROMNAME to your desired, of course, ROM name.
If you want to build One-Package ROM, just use 1st and 2nd command and don't forget to include all files on all *.tar.md5 (such as modem, csc, apboot) like this :
Code:
tar -H ustar -c *.* >> ROMNAME.tar
md5sum -t ROMNAME.tar >> ROMNAME.tar
How to change your rom name :
At root explorer you see at folder system "build.prop"
Open it in text editor edit "ro.build.display.id=GINGERBREAD.XXKPH" with your rom name
Another Handy Modification Guide:
How to edit system.rfs on your Pc :
importan : if you want to edit system.rfs at windows, DON'T use Magic Iso, why? because i was use it, then my system.rfs corrupt.
you must have linux (ubuntu recommended)
run it from terminal :
Code:
sudo mount -o loop system.rfs /some_dir
make required modification
then Unmount it
How to Unpacking & repacking the image :
Note: below I give you the details for unpacking and repacking manually, but I have attached two perl scripts that do most of this for you
If you are good with a hex editor, you can open up any of these images and strip off the first 2k of data. Then, look for a bunch of zeroes followed by the hex 1F 8B (which is the magic number of a gzip file). Copy everything from the first line of the file, through the zeroes, and stopping at the 1F 8B. That is the kernel. Everything from the 1F 8B through the end is the ramdisk. You could save each of these files separately. In order to see the contents of the ramdisk, you need to un-gzip it and then un-cpio it. You could use a command like this (ideally after creating a new directory and cd'ing into it):
Code:
gunzip -c ../your-ramdisk-file | cpio -i
That will place all of the files from the ramdisk in your working directory. You can now edit them.
In order to re-create the ramdisk, you need to re-cpio them and re-gzip those files, with a command like the following (remember, cpio will include everything in the current working directory, so you probably want to remove any other cruft you might have in there):
Code:
find . | cpio -o -H newc | gzip > ../newramdisk.cpio.gz
The final step is to combine the kernel and your new ramdisk into the full image, using the mkbootimg program (which you should download and compile from the git repository):
Code:
mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel your-kernel-file --ramdisk newramdisk.cpio.gz -o mynewimage.img
Now, there's a lot of hassle in pulling apart files in hex editors and remembering all of these commands, so I wrote unpack and repack perl scripts for you (attached). Hooray.
How to Manually deodex your phone :
What you'll need:
xUltimate v2.2
Unzip xUltimate v2.2, and launch "Main.exe"
If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
Run option 1. After option 1 is done, run option 2.
Now these well take a while. Run option 3.
IMPORTANT: After you have run option 3, you MUST navigate to the xUltimate folder and find "origi_frame" folder, and delete "guava.odex". It's a bad file, and interferes with deodexing process.
Now run option 4, and wait.
Exit xUltimate, and put the phone in USB mass storage.
Go back into the xUltimate folder and copy "done_frame", and "done_app", and move them to the root of the sdcard.
Put the phone in PC mode
Open a command prompt, and do the following:
Code:
adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot
Your phone should now be deodexed!
You may notice an increase in speed, and you now have the ability to edit certain files with greater effects.
How to change bootanimation :
using a Root explorer goto the /system/media directory.
Copy bootanimation.zip to your SD Card.
Connect your droid to your computer with usb and mount the SD Card
Copy bootanimation.zip to your computer.
extract bootanimation.zip to a folder
Inside you will find 2 folders with all the individual PNG files in them.
With photoshop or paint modify the png files to add your custom graphics, OR make/download your own pictures. (Make sure they are match with your phone device)
Highlight the two folders and the desc file.
Right click the highlighted files.
Select add files to archive.
Select Zip check box
In the compression method drop down box select Store. (this is key if you dont do this it wont play the animation)
save the archive as bootanimation.zip
copy the new bootanimation.zip to your SD Card
Select the bootanimation.zip file from your SD Card and move it... system>media>paste
________________
i'm just 12 years old if i can do it, why you can't
Advantages of this way is :
More efficient
Reduce your internet usage (dont need kitchen, apk manager, etc)
Easy to modification (You can see the direct result)
Reduce your time (only 2 hours i can do this way)
More soon
You steal my IDEAS Univos! No, just kidding, there are incorrect guide on "how to hard reset" lol. Anyway, try to build a ROM before creating this guide, my friend.
Wow Kids!
are doing development now a days
fla.sh said:
You steal my IDEAS Univos! No, just kidding, there are incorrect guide on "how to hard reset" lol. Anyway, try to build a ROM before creating this guide, my friend.
Click to expand...
Click to collapse
im not steal it.
Where is incorrect guide i'm try to fix it?
Sent from my GT-S5830 using XDA App
GadgetCheck said:
Wow Kids!
are doing development now a days
Click to expand...
Click to collapse
Thanks
Sent from my GT-S5830 using XDA App
This guide tested by me, and i have get result from this.
Sent from my GT-S5830 using XDA App
If you have question just ask me!
Sent from my GT-S5830 using XDA App
I think this guide is the same with fla.sh's guide.
devilsking said:
I think this guide is the same with fla.sh's guide.
Click to expand...
Click to collapse
Different, Fla.sh make guide for cooking his rom.
in this thread i tell you how to make your own custom rom.
with Phone device Samsung Galaxy Ace.
Univos said:
Different, Fla.sh make guide for cooking his rom.
in this thread i tell you how to make your own custom rom.
with Phone device Samsung Galaxy Ace.
Click to expand...
Click to collapse
ya ya. I see tks for your guide
devilsking said:
ya ya. I see tks for your guide
Click to expand...
Click to collapse
Please press thanks button, if i helped you
Sent from my GT-S5830 using XDA App
Univos said:
This guide tested by me, and i have get result from this.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
Now that you're awesome like fla.sh , I'll be quietly tucking in a corner thinking how young teenagers get their knowledge . XD jkjk
EmoBoiix3 said:
Now that you're awesome like fla.sh , I'll be quietly tucking in a corner thinking how young teenagers get their knowledge . XD jkjk
Click to expand...
Click to collapse
Just kept reading, ask people, don't feel has a lot of knowledge, kept countinue to learn
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
Now that you're awesome like fla.sh , I'll be quietly tucking in a corner thinking how young teenagers get their knowledge . XD jkjk
Click to expand...
Click to collapse
Maybe this holiday i will developt a simple custom rom.
Sent from my GT-S5830 using XDA App
Univos said:
Maybe this holiday i will developt a simple custom rom.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I am thinking about a kid with two or more different XDA ID.
ketut.kumajaya said:
I am thinking about a kid with two or more different XDA ID.
Click to expand...
Click to collapse
No, the real name Fla.sh is "Aver..." my real name is "iz..." we are student of junior high school at surabaya. I'm "Aver..." friend.
Sent from my GT-S5830 using XDA App
Univos said:
No, the real name Fla.sh is "Aver..." my real name is "iz..." we are student of junior high school at surabaya. I'm "Aver..." friend.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I'm swear.
Sent from my GT-S5830 using XDA App
ketut.kumajaya said:
I am thinking about a kid with two or more different XDA ID.
Click to expand...
Click to collapse
ROFLAMO
Jukirdolly said:
ROFLAMO
Click to expand...
Click to collapse
??????
Sent from my GT-S5830 using XDA App
Having just purchased another Atrix that was running stock Gingerbread 2.3.6 (4.5.141), I was frustrated by the lack of a complete rooting guide and appropriate files. There is a guide in this forum (Link) which is based on an article from Android Advice (Link), but I noticed that both lack a lot of basic information for the inexperienced user. Also, the zip file available from Android Advice was missing a key file (Superuser!). So, I made a guide.
This may look complicated, but is super easy. If you don't feel comfortable using this method, you can use this automated tool (yes, it works on 4.5.141). It won't be as satisfying, or even feel good. You won't learn anything, but you will be rooted. Download tool here (link in OP is broken).
Pre-work:
1) Read the xda Atrix Beginners Guide (then read it again)! (Link)
2) Download and install 7zip. (Link)
3) If they are not already installed on your PC, download and install the Atrix drivers for Windows. (Link)
4) Download the attached files (sorry, had to break them in to two files due to forum size constraints). Create a new folder on your hard drive named "Android" (c:\Android). Extract both attached zip files to this folder (all the files need to be in "Android", not in a sub folder).
5) On your phone go to Settings, Applications, Development, then tick USB Debugging.
Notes:
Do not type quotes.
After each command hit enter.
Be mindful of spaces.
You can simply copy each command and paste in to the command prompt.
If you encounter any errors after entering a command, just ignore and keep going (assuming you entered the command properly).
Work:
1) Attach your phone to the PC via USB. In the USB settings make sure USB Mass Storage is selected.
2) Reboot phone while holding volume down until you see "fastboot".
3) Press volume up to initiate fastboot.
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type "cd c:/android"
6) "fastboot.exe flash preinstall preinstall.img"
7) "fastboot.exe reboot"
8) Wait for phone to reboot.
9) "adb shell"
10) "/preinstall/dosu". If you get an error (I did), type "/preinstall/su"
11) "/bin/mount -o remount,rw /system"
12) cp /preinstall/su /system/bin/"
13) "chmod 6755 /system/bin/su"
14) "PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk"
15) Reboot phone.
16) On your phone go to your apps and make sure the Superuser icon is there. Open the app, go to settings, then update the SU binary.
17) Open a terminal emulator, then type "su" and hit enter. You should see "#" if you are rooted. Or, download Root Checker from the Play Store.
My phone rebooted itself after step 11, so I had to re-open the adb shell.
I copied and pasted the text from the command prompt for reference (attached).
If I missed anything or have any errors, let me know and I will update the post.
Good luck!
Note: If you experience problems with updating superuser after rooting, try going in to Manage Applications and clear Superuser data. If that doesn't work go to the Play Store and Install Superuser Update Fixer.
Downloads:
My Atrix AFH Folder
*****
Thanksssss
Just want to show my appreciation. Your guide followed step by step worked flawlessly on my atrix. Ive been trying to root this darn thing for about a week and a half with no luck. found your guide and worked perfect first time around. Thanks..
David
Thanks for the information. Just wanted to do this, and while reading the procedure, I found that there is no Superuser.apk in the attachments. Do I have to get it from some other place.
Thanks
upndwn4par said:
Having just purchased another Atrix that was running stock Gingerbread 2.3.6 (4.5.141), I was frustrated by the lack of a complete rooting guide and appropriate files. There is a guide in this forum (Link) which is based on an article from Android Advice (Link), but I noticed that both lack a lot of basic information for the inexperienced user. Also, the zip file available from Android Advice was missing a key file (Superuser!). So, I made a guide.
Remember to click THANKS if this guide helped you!
Pre-work:
1) Read the xda Atrix Noob Guide (then read it again)! Link
2) Download and install 7zip. Link
3) If they are not already installed on your PC, download and install the Atrix drivers for Windows. Link.
4) Download the attached files (sorry, had to break them in to two files due to forum size constraints). Create a new folder on your hard drive named "Android" (c:\Android). Extract both attached zip files to this folder (all the files need to be in "Android", not in a sub folder).
5) On your phone go to Settings, Applications, Development, then tick USB Debugging.
Notes:
Do not type quotes.
After each command hit enter.
Be mindful of spaces.
Work:
1) Attach your phone to the PC via USB. In the USB settings make sure USB Mass Storage is selected.
2) Reboot phone while holding volume down.
3) Press volume up to initiate fastboot.
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type "cd c:/android"
6) "fastboot.exe flash preinstall preinstall.img"
7) "fastboot.exe reboot"
8) Wait for phone to reboot.
9) "adb shell"
10) "/preinstall/dosu". If you get an error (I did), type "/preinstall/su"
11) "/bin/mount -o remount,rw /system"
12) cp /preinstall/su /system/bin/"
13) "chmod 6755 /system/bin/su"
14) "PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk"
15) Reboot phone.
16) On your phone go to your apps and make sure the Superuser icon is there. Open the app, go to settings, then update the SU binary.
My phone rebooted itself after step 11, so I had to re-open the adb shell.
I copied and pasted the text from the command prompt for reference (attached).
If I missed anything or have any errors, let me know and I will update the post.
Good luck!
Click to expand...
Click to collapse
RE super user pkg.
aksma said:
Thanks for the information. Just wanted to do this, and while reading the procedure, I found that there is no Superuser.apk in the attachments. Do I have to get it from some other place.
Thanks
Click to expand...
Click to collapse
Well for me what happen is down at the bottom he has two links for two of the files you need to zip. in one of those, there is a superuser file. When doing the cmd commands at the end you will end up installing the superuser. The best thing to do which really helped me was to download the command prompt text file, that way you can mimic exactly what you see. Hope this helps.
-David
Thanks David, I just started doing the same. Lets see how it goes.
good luck
aksma said:
Thanks David, I just started doing the same. Lets see how it goes.
Click to expand...
Click to collapse
no problem. Believe me i was in the same position. I must of tried rooting mine like 15 times to no avail ,then i found this thread and it worked.
Worked like a Champ!! Thanks David... Was quick and easy.. ..
excellent
aksma said:
Worked like a Champ!! Thanks David... Was quick and easy.. ..
Click to expand...
Click to collapse
Good deal. So glad i found this thread haha.
Glad I could help!
good one.
Thanks a lot
was so expected that this guide
Going to give it a try
I read through everything and think I have somewhat of a clue on what I need to do..LOL. Whatever the results I will post back and let you know. I have had my atrix since it was first released and have never had the time to root it as I cannot be without a phone couldn't take a chance.
I retire soon so hopefully will have more time to get invovled in things as this is a great forum.
Mac
Thanks!
Rooted phone
dmacdog said:
I read through everything and think I have somewhat of a clue on what I need to do..LOL. Whatever the results I will post back and let you know. I have had my atrix since it was first released and have never had the time to root it as I cannot be without a phone couldn't take a chance.
I retire soon so hopefully will have more time to get invovled in things as this is a great forum.
Mac
Click to expand...
Click to collapse
Welcome to the wonderful world of messing with your phone!
You really can't harm your phone trying to root it. If you type a command wrong, just re-type it. No worries. There are lots of good guides out there for whatever you want to do. The noob guide (linked on the first page) is a great place to start. And there are plenty of members willing to help.
Let us know how things go!
thanks
that was cool!
very usefull!! thank you!
very useful
Sent from my MB860 using xda premium
condor7272 said:
that was cool!
Click to expand...
Click to collapse
Yes it is. Awesome feeling to look in your app drawer and see this:
THANKS!!
upndwn4par said:
Welcome to the wonderful world of messing with your phone!
You really can't harm your phone trying to root it. If you type a command wrong, just re-type it. No worries. There are lots of good guides out there for whatever you want to do. The noob guide (linked on the first page) is a great place to start. And there are plenty of members willing to help.
Let us know how things go!
Click to expand...
Click to collapse
followed the directions and am now rooted!!
next to look for boot load unlock - not sure why but 'im gonna figure it out - and then an ics rom or wait for the q3 'official' motorola release . . . decisions
1iJakk said:
followed the directions and am now rooted!!
next to look for boot load unlock - not sure why but 'im gonna figure it out - and then an ics rom or wait for the q3 'official' motorola release . . . decisions
Click to expand...
Click to collapse
Don't unlock your bootloader if you think you will want official Moto ICS update (major hard brick risk).
Just a quick info for people with Xiaomi Piston v3 headset, nothing new either:
As root you can assign all three keys in the file
Code:
/system/usr/keylayout/msm8226-tapan9302-snd-card_Button_Jack.kl
Buttons in order top->bottom when you wear the headset
Upper button: Keycode 115
Middle button: Keycode 226
Lower button: Keycode 217
(at least on Cyanogenmod 13)
For example:
Code:
key 226 HEADSETHOOK
key 115 VOLUME_UP
key 217 VOLUME_DOWN
You can get some inspiration on what actions are available in the "Generic.kl" file in the same folder
Todo: Write a little script in /persist so it stays accross system updates.
so how i'm supposed to enable those actions? please explain the process step by step
Thank you
cameravala said:
so how i'm supposed to enable those actions? please explain the process step by step
Thank you
Click to expand...
Click to collapse
Hope this works on your ROM.
First the /system parition needs to be writeable, you need root for that.
In a terminal emulator or in "adb shell" on your PC do:
Code:
mount -o remount,rw /system
Then you can edit it, for example go to the location with a root-explorer and open it from there in a text editor (most comfortable)
or you can transfer it to your PC and edit it there:
On the phone:
Code:
cp /system/usr/keylayout/msm8226-tapan9302-snd-card_Button_Jack.kl /sdcard
Then edit the file that is now in your internal storage that shows up on PCs over usb.
To put it back, on the phone:
Code:
cp /sdcard/msm8226-tapan9302-snd-card_Button_Jack.kl /system/usr/keylayout/msm8226-tapan9302-snd-card_Button_Jack.kl
chmod 644 /system/usr/keylayout/msm8226-tapan9302-snd-card_Button_Jack.kl
You need to reboot it after that. You can ask if you have other questions.
This won't work if your kernel doesn't include this patch: https://github.com/CyanogenMod/andr...mmit/9aecde9a7aaa7362ef7b4c04ad92d3873a90d8eb
fonz93 said:
This won't work if your kernel doesn't include this patch: https://github.com/CyanogenMod/andr...mmit/9aecde9a7aaa7362ef7b4c04ad92d3873a90d8eb
Click to expand...
Click to collapse
Damn, I was hoping this is universal.
Thanks for the clarification
fonz93 said:
This won't work if your kernel doesn't include this patch: https://github.com/CyanogenMod/andr...mmit/9aecde9a7aaa7362ef7b4c04ad92d3873a90d8eb
Click to expand...
Click to collapse
Thanks you guy
Will this work with CM13?
tiagp said:
Will this work with CM13?
Click to expand...
Click to collapse
Yes
I can't find msm8226-tapan9302-snd-card_Button_Jack.kl on root/system/usr/keylayout
Should i make that file named msm8226-tapan9302-snd-card_Button_Jack.kl on that location?
I'm on Cm13 with latest build.
giboto91 said:
I can't find msm8226-tapan9302-snd-card_Button_Jack.kl on root/system/usr/keylayout
Should i make that file named msm8226-tapan9302-snd-card_Button_Jack.kl on that location?
I'm on Cm13 with latest build.
Click to expand...
Click to collapse
Yeah, you'll need to create it in that location. Your keycodes might differ from the OP (mine did) so you might need to use the keytest.apk to make sure your mappings are correct. Other than that, you'll be fine.
Works me perfect
I didn't create the file, instead of that i modified the "Generic.kñ" file and after a fast reboot worked fine
Sent from my Moto G using XDA-Developers mobile app