Related
This update.zip will flash clockwork recovery, overwriting the need/ability to use the stock recovery folder with command in it.
For advanced users only.
v.8 Download: http://www.mediafire.com/?dvleg4oatkfxm7w
The credit for this all goes to Bekit for the biggest step forward on the Gtablet, and obviously Koush for the custom recovery to begin with. Roebeet packaged this update.zip.
Instructions:
1) Unpack download to root of sdcard. (Internals /sdcard, NOT /sdcard2)
2) Start tablet while holding volume + and power. (Let go when you see text come up saying entering recovery)
3) You will see a short installation and it will reboot.
4) Check the install by powering off, the powering on with volume+ and power
5) You should be greeted by a menu with Clockworkmod at the top
i have been using clockwork on my gtablet for several days now. it backs up and restores just like i would expect it too.
well done as usual.. props for all involved.
Works great no problems at all !!!
wishlist:
1. add SDCARD2 to the mount and storage section.
2. ... wait that is it.!
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
rushless said:
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
Click to expand...
Click to collapse
thats how i did it
rushless said:
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
Click to expand...
Click to collapse
Or just extract the zip file supplied in the first post onto the sd card. Everything will go into its place. Then boot from recovery using power and volume+.
So, if I place the cwm update.zip and recovery folder in the root of sdcard (internal), then when I boot into recovery, CWM will show up instead? Just want to know if it really is that simple. Also, if I want to flash a new ROM (Like the zpad one), do I simply place the update.zip from that rom anywhere other than the root of "sdcard", and flash using CWM?
One last question, if I delete the CWM update.zip, is it like CWM was never placed on my g tab?
Am I the only one having trouble getting cwrecovery on the root of sd card? cant get this to run. i am a visual learner and reading how to do all this is helping me very little. if anyone would be willing to do a video or reference me to a link so i can learn to do all this, i would appreciate greatly. this is very frustrating tab stock!
hey this might help you get it installed..
plug your gtablet into your computer, then on the gtablet, click the "enable usb storage connection" button
then on your pc, open windows explorer, and open removeable drive F, the letter may be different for you.. it should show 13gb free on it, and there should be an android folder and a dcim folder.. that's the root of the storage inside the tablet.. it's the same as sdcard.. unzip the clockworkblahblah.zip to the root/top level directory of that removeable drive. then turn the tablet off. and then hold down the volume + button while powering it back on, it should install the clockworkmod recovery manager.. that's about it
jw52637 don't feel bad... I'm a visual learner as well.
uncola,
I followed your instructions and I saw the update install on boot up. Now I'm lost. I expected to see and application named ClockworkMod Recovery or something like that... but I did not. How do I know it is installed and how do I use it to back up my stock ROM? Also, do I remove the "update.zip" from the root directory or just leave it there?
Sorry for the questions but I want to learn how to do this so I can stop bothering you guys.
mmracing said:
jw52637 don't feel bad... I'm a visual learner as well.
uncola,
I followed your instructions and I saw the update install on boot up. Now I'm lost. I expected to see and application named ClockworkMod Recovery or something like that... but I did not. How do I know it is installed and how do I use it to back up my stock ROM? Also, do I remove the "update.zip" from the root directory or just leave it there?
Sorry for the questions but I want to learn how to do this so I can stop bothering you guys.
Click to expand...
Click to collapse
ClockWorkMod Recovery is the recovery system...so you have to boot your tab into recovery (hold volume + and power the tab up). If installed, you'll get the ClockWorkMod Recovery instead of the stock recovery system. You can make backups, do restores, install .zips, etc... from there.....then "reboot" the system to boot back to your normal system.
Thanks tcrews. I moved the update.zip from the root directory to a saved directory then rebooted holding the volume + key and it booted into ClockWorkMod Recovery. I chose back up and everything seemed to backup fine.
So if/when I install another ROM and I do a restore to the ROM I just backed up I should be right back to where I was at that time. I have used Titanium Backup to back up all my applications and settings and know I would have to restore them also.
I'm just wanting to understand how I can get back to "stock" so that I can get the automatic updates from Viewsonic.
Well i just tried it all again, and all worked very well. Thank you very much
Ok, I'm totaly new to this so please bare with me, having some troubles with my G tablet NOT booting so I cant access it through Windows to install CW to fix my tablet. How can I get the Files on the tablet? I can get it to attempt recovery but no luck. PLEASE help. I'm pulling my hair out here.
Anyone know how or am I sol and should try and sent it back?
maccaw1 said:
Anyone know how or am I sol and should try and sent it back?
Click to expand...
Click to collapse
There is a physical reset button inside the device, or you can try ADB.
I cant get the recovery image to find update.zip
I have clockwork recovery gtab-cwm-v08 installed and renamed to update.zip in the root of the internal sd but when i boot into recovery it goes to the android screen then shows a triangle with a exclamation point, then reboots normally!
I rooted with z4root 1.2.1
I have superuser permission so am rooted!
Unrooted then rooted again figuring this might help!
Tried a few different clockwork recoveries
have no idea what the problem is! if anyone has any clue it would be appreciated!
drumdumb said:
I cant get the recovery image to find update.zip
I have clockwork recovery gtab-cwm-v08 installed and renamed to update.zip in the root of the internal sd but when i boot into recovery it goes to the android screen then shows a triangle with a exclamation point, then reboots normally!
I rooted with z4root 1.2.1
I have superuser permission so am rooted!
Unrooted then rooted again figuring this might help!
Tried a few different clockwork recoveries
have no idea what the problem is! if anyone has any clue it would be appreciated!
Click to expand...
Click to collapse
Had that happen to me. What I did was run the CWM again into the gtab. Next reboot I had CWM insgtalled and working.
Hope that helps
CWM 0.8 is the one that I used and is working for me. I have the gTab w/the "original" partition scheme, and installed it by the original gTab update process.
If you're using newer CWMs I've read posts in the CM6b4 thread that newer CWM version seem to be causing problems for some people.
Also if you have a "newer" "batch" gTab w/a different partition map scheme you might want to check what the latest info is on the IRC channel, #tegratab on freenode IIRC. Might be quickest to ask for help there anyways, as it sounds like this probably isn't your problem.
LOL i was about to say i have a fascinate, but it would be redundant because I am posting in a Fascinate forum.
Hi guys, first post, thought I would post first about something not help related, but my phone is messed up.
I rooted my phone with 1 click root from android central, then i flashed it using odin and backed up my rom ( i guess stock touchwiz) with CWM from rom manager. Then i installed this theme: AOSP REVOLUTION a port on androidforums the adress is /fascinate-all-things-root/251094-theme-port-aosp-revolution.html ( after androidforums obviously, i cant post links!) ) -_-
I installed it by downloading the zip, renaming it to update, and launched CWM recovery and ran apply sd update.zip. Then i rebooted my phone the verizon logo flashed for a long time then the screen went black, and when i pressed the power buton all that happened is that the 4 buttons would light up.
Can anybody help me, sorry if i pissed you off because of my uber-noobness, but i just got the phone a month ago and rooted it yesterday. I made sure i followed the direction so my phone does mess up, but something went wrong after installing that theme. Thanks a FREAKING GAGILLION if you can help!
PS Another noob move but how do I run the backup that i made? sorry for my noobness if it offends u.
If you have ClockworkMod recovery installed, you just need to boot into it and restore your backup. Shut down the phone. Hold both volume up and down and then press power. When you see the Samsung logo, release power but keep holding the volume buttons. It'll boot into standard recovery. Select apply update.zip and it'll boot you into Clockwork. Should be easy to figure out how to restore from there.
If this doesn't work, then you don't have clockwork installed, or installed correctly. There should be a recent post on installing a new red clockwork. Follow that and then follow the instructions above except for applying update.zip. The new red clockwork boots directly, without going through the stock blue recovery first.
Alternately, there are various all-in-one Odin packages floating around here that will return you pretty much back to stock.
The problem you have here is that you flashed a theme that is made specifically for a the asop Rom. So the thing to do is download another Rom, place on root of sd card, boot into recovery (hold both volume keys and power until samsung logo flashes twice), wipe your data and cache, flash rom and reboot. I'm assuming you have updated to dl09 so you want a dl09 rom. here is a suggestion http://forum.xda-developers.com/showthread.php?t=894126, just download system rom part, ignore the odin stuff. hope this helps
lordshark12 said:
I installed it by downloading the zip, renaming it to update, and launched CWM recovery and ran apply sd update.zip.
Click to expand...
Click to collapse
This was also a mistake. On this device CWM depends on there being a cwm update.zip on the root of you sd card. To flash a rom/kernel/theme on this device you leave it alone and placed anywhere on the card. When booted in to cwm you use the "install zip from sdcard" option.
good day.
Yes LordShark,
As mentioned above, you do not rename the file at all. You can call it "umpty-Squat-Rom-Of-The_gods.zip or whatever you want, you boot into the CWM and as pointed out above, you will choose install zip from card and you will navigate to that umpty-squat that you downloaded to the phone.
So pull your SD card out and download a ROM and place it in the SD Card in a folder you like, I personally just use the default location od SD CARD / CLOCKWORKMOD / DOWNLOAD and store all my ROMs and stuff in that folder.
Hope this helps. Do not get too excited, your not ubber borked.... even if you are in a total panic you can follow the Adrynalyne ODIN back to bone stock DI01 post and in not to long you will up and running.
chopper the dog said:
This was also a mistake. On this device CWM depends on there being a cwm update.zip on the root of you sd card. To flash a rom/kernel/theme on this device you leave it alone and placed anywhere on the card. When booted in to cwm you use the "install zip from sdcard" option.
good day.
Click to expand...
Click to collapse
Thanks for the info!
Hi !
today I decided i should upgrade from CM7.0.2 to nb 118. But I first installed latest radio. I did a backup at this point. The radio flash went ok, the phone booted and everything worked fine.
I installed nightly build 118 from ROM manager without google apps, and with a dalvik wipe (no data/cache wipe). The phone booted up ok, but some widgets had disapeared, some shortcuts didn't work and some apps had disapeared too, the autorotation of screen at 0° had been unticked too... I rebooted, and finally decided I should revert to my backup.
That's where the real problem happens : after the backup restoration, the phone is stuck in a boot loop.
I can start with fastboot mode, but I can't access recovery mode, the red exclamation mark is there...
I'm not sure this tutorial : http://forum.xda-developers.com/showthread.php?t=751265 is adapted to my situation, should I follow it ?
Thank you for your help !
PS : I'm S-OFF
This should be @ the Q&A section but anyway, here we go:
I just had that bootloop situation myself and yes, you should follow that usb unbrick tutorial. That'll help you. Also, you should try if you can get to fakeflash by pressing VOLUP + POWER while @ the red exclamation window. If you can and you should be able to, search XDA for "fakeflash clockworkmod" or something similar, you should find a CWM image in a ZIP form. Then put that image into your SDCard, rename it to update.zip, go into the fakeflash menu and apply update.zip, it should fly you to the real recovery menu where you can do a full wipe and flash your ROM again.
Hopefully I'm not forgetting anything =D At least that's how I solved my situation and my phone is working fully again!
Hi.
Do you have the update.zip from recovery clock in the root of your sdcard, if so just press volume up and the power down at the same time, or the other way around ;-) when it change picture choose option, install update.zip and you should be in recovery mode
Im a noob, so dont laugh if i have written it the wrong way
Cheers, and good luck.
Jesus chist, it is written in the second post... Damn.
Hello trying to recover as well from a bricked HTC legend.
I cam unable to get to the update.zip to run.
it fails to verify the file.
and when i do get in to recovery I get E:Can't open /cache/recovery/command
i was trying to root it and it is not going so well I just want to get it back to 2.2
Please help
DroidFreak07 said:
Hello trying to recover as well from a bricked HTC legend.
I cam unable to get to the update.zip to run.
it fails to verify the file.
and when i do get in to recovery I get E:Can't open /cache/recovery/command
i was trying to root it and it is not going so well I just want to get it back to 2.2
Please help
Click to expand...
Click to collapse
That "Can't open /cache etc." error message indicates that you are in the fake-flash menu. Do you have a working recovery image in the root of your SDcard renamed to "update.zip"? If not, try searching the forum for "clockworkmod fakeflash" or something similar and it should show some topics that will help you.
I recently got my Legend working again from bootloop and usb brick so I'm ready to help you with your further problems that may occur =)
EDIT: And please, make sure that your recovery zip is just "update.zip" and not a ZIP file named "update.zip" cause then it will be a file called "update.zip.zip" =D
taksu said:
That "Can't open /cache etc." error message indicates that you are in the fake-flash menu. Do you have a working recovery image in the root of your SDcard renamed to "update.zip"? If not, try searching the forum for "clockworkmod fakeflash" or something similar and it should show some topics that will help you.
I recently got my Legend working again from bootloop and usb brick so I'm ready to help you with your further problems that may occur =)
EDIT: And please, make sure that your recovery zip is just "update.zip" and not a ZIP file named "update.zip" cause then it will be a file called "update.zip.zip" =D
Click to expand...
Click to collapse
Still nothing it try's to verify the file and fails.
any other Ideas? please.
DroidFreak07 said:
Still nothing it try's to verify the file and fails.
any other Ideas? please.
Click to expand...
Click to collapse
I hope you read this and if it isn't fixed yet then take a rom YOU KNOW that works.
go into recovery Go to "mounts and storage" and format SYSTEM. NOTHING ELSE.
Do a wipe and THEN flash your zip.
Remember to NOT go out of recovery when you have formatted the system.
I hope it helps.
I take no responsibility for any harm that comes to your phone as a result of applying this mod.
unofficial Clockwork Mod Recovery 5.0.2.7 for u8800pro and u8800 [upgrade to offical 2.3 GB]
Installation Instructions (upgrading - root explorer method):
Using any file explorer which is able to remount as writeable (such as root explorer), browse to the /cust_backup directory and remount it as writeable
Navigate to the image directory and backup up the current recovery by renaming it to something like recovery.bak, or _recovery.img
Rename the downloaded recovery to recovery.img and copy to the image directory.
Installation Instructions (new install):
Unplug any usb connection and turn the phone completely off
Whilst holding both the volume + and volume - keys hold the power button to turn the device on. Let go when you see a pink/purple screen.
Attach the usb cable to your computer and wait until a few usb mass storage devices are detected and mounted. Look for one that has just one directory called 'image' in it. Navigate into this directory and you'll see recovery.img etc.
(optional) Rename recovery.img to recovery_backup.img
copy the new recovery.img to image, unmount the mass storage device (safely remove in windows) and then pull the battery out to turn the phone off.
Hold volume + and power to boot to recovery.
Install any custom rom
change：
mod the kernel,Ums is worked now
use zte u880‘s charge png
can install zip from emmc and use emmc backup&restore
add ext4 fs support
about SDcard
if you can't mount SDcard in recovery,do this:
enter "advanced"--"Reboot Recovery"
then you could use the SDcard
ps:this is issue of offical GB,not recovery!
Download
http://sourceforge.net/projects/genoandroid/files/
mount sd_external error!
akalos said:
mount sd_external error!
Click to expand...
Click to collapse
have detailed info？
my worked fine
genokolar said:
have detailed info？
Click to expand...
Click to collapse
I tried to backup my rom to the external storage card,but was not possible
internal is ok
akalos said:
I tried to backup my rom to the external storage card,but was not possible
internal is ok
Click to expand...
Click to collapse
test it ,work fine for me
akalos said:
I tried to backup my rom to the external storage card,but was not possible
internal is ok
Click to expand...
Click to collapse
I have same problem!
please upload the recovery.log
Did you finally find out if there is a bug in the recovery?
Once you put the recovery, would Rom Manager detect it?
Copix said:
Once you put the recovery, would Rom Manager detect it?
Click to expand...
Click to collapse
no
10 digits
Got it. Unofficial...
Tested on u8800 and works very good. SD card sometimes can't mout properly, but i guess it's not an issue from CMW.
I've done a official GB backup, restored without a glitch, installed ICS demo without any problem too.
Can I upgrade my u8800 to official beta 2.3.5 and use this CWM to upgrade to cm7 or miui if I won't be able to use ics demo?
Sent from my u8800 using XDA App
Yes.
Sent from my ragelis
for me does not work. after several times trying to restore my miui backup (the onlyy one) it gave random errors some times, but after I was able to restore 2 times, I cant pass the miui boot.
MaRcIuPT said:
for me does not work. after several times trying to restore my miui backup (the onlyy one) it gave random errors some times, but after I was able to restore 2 times, I cant pass the miui boot.
Click to expand...
Click to collapse
Was it a backup you did with this CWM version? Or with the stockwell's CWM? The old backups don't work with this one I believe.
the backup its before this version of course. but even with this new CWM I cant flash new rom. I says error blablabla id u8800pro. I installed this because I wanted to try new ICSrom but now Im stuck to it lol
MaRcIuPT said:
the backup its before this version 4 of course. but even with this new CWM I cant flash new rom. I says error blablabla id u8800pro. I installed this because I wanted to try new ICSrom but now Im stuck to it lol
Click to expand...
Click to collapse
Have you flashed official GB before installing this recovery? I think you need to do that before this works in the original U8800.
yes I did ! the ICS works but not others.
Hmm, I tried to restore my backup from yesterday done with stockwells 5.0.2.6 recovery and my phone got ****ed up. I know I shouldn't have done this but I just had to try. xD Now I can't get past the Huawei logo, when I push the power the phone starts but just turns off after couple of seconds. I can get to bootloader (pink screen) but not to recovery. I hope no one else has tried this and I hope I get my phone working again.
Would anyone have any advice how to get my phone back up and running? Or should I just go bring it to warranty support?
have you tried to replace the recovery.img from this topic again? that happened to me too when I tried to go back with CWM v4 but then I replaced with this
Hey guys, I'm new to XDA and I have a few questions needed to be answered if you don't mind .
So an "official" ICS leak came out not too long ago, and tonight I tried installing it on my a500. By "it" I mean the stock leak for unrooted devices. Problem is, it's not working.
Long story short, I Googled like crazy looking for answers to these questions, and I found no specific answers anywhere from Iconia users, only by people with Droid phones.
I need to know the answers for
1) Can I install the stock version ICS from my internal SD card? If so, how?
2) How do I do this without rooting my device?
3) After renaming the download to "update.zip", as some have said, do I first extract the contents then place them in a folder called update.zip, or leave it as is and rename the large file?
In the end, I renamed the file to "Update.zip" without extraction, then reboot my device in recovery mode. The green Droid came on, then a warning sign, and nothing happened. How do I boot the ICS?
Sorry if this seems like a lot, I barely know any of the technical aspects of this stuff!
must be on externel SD with stock recovery.
same thing happend to me. I found out that my pc named the zip update.zip.zip, i used file explore on my 500 and took of the extra .zip and flashed it. And it worked perfectly.
0) You shouldn't have messed with this without first understand exactly what and how you do it. There's a really BIG STOP sign in the thread. Read the thread first to avoid bricking your device. Everything is here, so you don't have to "google like crazy".
To your questions:
1) No. You need an external SD for your stock recovery to flash the update.zip
2) Copy update.zip to the ROOT of your external SD card, power off, then power on, while holding Volume DOWN key
3) You should not extract the archive.
About root - it's a nice thingy - you are able to install a custom recovery in order to BACKUP your current firmware. Then you can flash one of the 4 custom ICS ROMs that will keep your recovery safe and not overwrite it. Actually you can flash very easily any custom a500 ROM with a custom recovery.
Now, try to flash again by using an external SD, if it still doesn't boot, try to hard reset the device (tutorial on how to hard reset - in my signature - in the revert to 3.0.1 thread)
If it still doesn't boot, read this thread on how to recover your tab:
http://forum.xda-developers.com/showthread.php?t=1516012
Good luck.
drkalo said:
0) You shouldn't have messed with this without first understand exactly what and how you do it. There's a really BIG STOP sign in the thread. Read the thread first to avoid bricking your device. Everything is here, so you don't have to "google like crazy".
To your questions:
1) No. You need an external SD for your stock recovery to flash the update.zip
2) Copy update.zip to the ROOT of your external SD card, power off, then power on, while holding Volume DOWN key
3) You should not extract the archive.
About root - it's a nice thingy - you are able to install a custom recovery in order to BACKUP your current firmware. Then you can flash one of the 4 custom ICS ROMs that will keep your recovery safe and not overwrite it. Actually you can flash very easily any custom a500 ROM with a custom recovery.
Now, try to flash again by using an external SD, if it still doesn't boot, try to hard reset the device (tutorial on how to hard reset - in my signature - in the revert to 3.0.1 thread)
If it still doesn't boot, read this thread on how to recover your tab:
http://forum.xda-developers.com/showthread.php?t=1516012
Good luck.
Click to expand...
Click to collapse
The above could not have been said any better by anyone. EXACT TRUTH.
i just want to add this is a leak for the a500 . I do not think i would call it official.Also Remember Its yet to be known of the procedure you will have to fallow to accept the RELEASE IF I C S from acer in April (when they say anyway)
Thou from the past i can nearly guarantee you there will be a way. But could require you to downgrade root and flash one of the many ics cwm roms..as in the post above mine signature
drkalo said:
0) You shouldn't have messed with this without first understand exactly what and how you do it. There's a really BIG STOP sign in the thread. Read the thread first to avoid bricking your device. Everything is here, so you don't have to "google like crazy".
To your questions:
1) No. You need an external SD for your stock recovery to flash the update.zip
2) Copy update.zip to the ROOT of your external SD card, power off, then power on, while holding Volume DOWN key
3) You should not extract the archive.
About root - it's a nice thingy - you are able to install a custom recovery in order to BACKUP your current firmware. Then you can flash one of the 4 custom ICS ROMs that will keep your recovery safe and not overwrite it. Actually you can flash very easily any custom a500 ROM with a custom recovery.
Now, try to flash again by using an external SD, if it still doesn't boot, try to hard reset the device (tutorial on how to hard reset - in my signature - in the revert to 3.0.1 thread)
If it still doesn't boot, read this thread on how to recover your tab:
http://forum.xda-developers.com/showthread.php?t=1516012
Good luck.
Click to expand...
Click to collapse
Thanks! This all makes sense. However, there remains something unclear to me. If I have to use an external SD to boot a leaked ROM, how/where does the OTA update install from on my internal sd card? Can't I just place this ROM where the OTA usually loads from and run recovery after that? Thanks in advance
austin148 said:
Thanks! This all makes sense. However, there remains something unclear to me. If I have to use an external SD to boot a leaked ROM, how/where does the OTA update install from on my internal sd card? Can't I just place this ROM where the OTA usually loads from and run recovery after that? Thanks in advance
Click to expand...
Click to collapse
The way you can flash it yourself (stock recovery: Vol down + power) requires an external SD. You don't have access to your internal storage by using stock recovery and there's no "key combo" you can use to do that. Once you install custom recovery, you'll be able to flash from Internal memory as well (thor's does, still haven't used RA recovery and don't know about it).
...But in order to install custom recovery, you need root. Custom recovery allows you to make full backups of your currently running FW + app data. If you're still on Honeycomb I recommend you get an external SD and go for the method 2 downgrade procedure and root it or go for timmyDean's procedure that installs rooted stock 3.2.1 ROM on your device (says it does need an external SD so it might be your choice), then install CWM and voila - you're in control and you can wipe your tab and install whatever cusom ROM you like....and you backup first of course
If you don't feel like messing with your tab's system, then wait a little more for ACER to release ICS OTA update.