Database Users

Mytouch 3G 1.2/LE (I THINK)Semi-Bricked 2 !!! Helppp !!!

Bare with me this is my first thread :
Mytouch 1.2 doesnt get passed Splash screen. It wont load into recovery.
It boots in FASTBOOT & HBOOT. But thats it.
I have :
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP31000)
CPLD-13
RADIO-6.35.10.18
If anyone can help i would really appreciate it !!!!
__________________
White Mytouch 3G 1.2 (T-Mobile)
Amon_RA Sapphire v1.6.2G Recovery

I am totally wrong!

Start here : http://forum.xda-developers.com/showthread.php?t=623141
Make a gold card from this info : http://forum.xda-developers.com/showthread.php?t=622530
Grab the Engineering SPL (2010) from here : http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Put the Engineering SPL onto the new Gold card, in Fastboot go into Hboot mode and flash that
At that point you'll have a new SPL but no rom's gona work. (It'll show up as a 32B, H etc thus why no rom will work)
Then go here : http://forum.xda-developers.com/showthread.php?t=623141
get the zip file with the radio.img/hboot for the fender.
(Download the Recovery 1.6.2G from here http://forum.xda-developers.com/showthread.php?t=530492 instead of the one in the link above)
The instructions from the link above
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
Grab the MT3GFender32A-Stock-1.0-signed.zip from the link above
Go into recovery and flash that rom.
You'll then have a rooted stock rom. Which is how I rooted my fender. DO NOT use a radio from any other thread than the one I specified, otherwise you have a very strong chance of actually bricking your phone.
The reason you go down to a 2010 Engineering SPL in the first place is because the 1.33.0013 is perfected and you can't flash anything, so least this way you go down to 2010, flash the needed radio/hboot/recovery allowing it to be rooted, then you flash the stock (rooted) rom.

kbeezie said:
Start here : http://forum.xda-developers.com/showthread.php?t=623141
Make a gold card from this info : http://forum.xda-developers.com/showthread.php?t=622530
Grab the Engineering SPL (2010) from here : http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Put the Engineering SPL onto the new Gold card, in Fastboot go into Hboot mode and flash that
At that point you'll have a new SPL but no rom's gona work. (It'll show up as a 32B, H etc thus why no rom will work)
Then go here : http://forum.xda-developers.com/showthread.php?t=623141
get the zip file with the radio.img/hboot for the fender.
(Download the Recovery 1.6.2G from here http://forum.xda-developers.com/showthread.php?t=530492 instead of the one in the link above)
The instructions from the link above
Grab the MT3GFender32A-Stock-1.0-signed.zip from the link above
Go into recovery and flash that rom.
You'll then have a rooted stock rom. Which is how I rooted my fender. DO NOT use a radio from any other thread than the one I specified, otherwise you have a very strong chance of actually bricking your phone.
The reason you go down to a 2010 Engineering SPL in the first place is because the 1.33.0013 is perfected and you can't flash anything, so least this way you go down to 2010, flash the needed radio/hboot/recovery allowing it to be rooted, then you flash the stock (rooted) rom.
Click to expand...
Click to collapse
from what it looks like hes already made a goldcard if he has that radio and spl........... he needs to flash the stock radio, spl, and recovery in fastboot...

ceas909 said:
from what it looks like hes already made a goldcard if he has that radio and spl........... he needs to flash the stock radio, spl, and recovery in fastboot...
Click to expand...
Click to collapse
If he already made the gold card, that's good, but may still need to flash the engineering SPL (2010) because I think 2007 is also perfected. I would still just flash the engineering SPL since I Know that works, and at this point we're trying to avoid any chance of bricking.

edit : wasn't 100% sure of what I was saying ;-)

Thats every one for helping I really appreciate it.
I tried flashing the Engineering SPL (2010) but i left it as (Sappimg.zip) and when i flash it through Hboot it asks me if i want to start the update after i press the trackball it says System-unzipping and thats where it stays. it doesnt load. and i tried to flash a couple of of other spls before but it stop after it tried to update the Radio. For some reason i cant update the radio it always freezes when the update is about 95% complete.
Any Answerss ???? Please =\

yonkersboy127 said:
Thats every one for helping I really appreciate it.
I tried flashing the Engineering SPL (2010) but i left it as (Sappimg.zip) and when i flash it through Hboot it asks me if i want to start the update after i press the trackball it says System-unzipping and thats where it stays. it doesnt load. and i tried to flash a couple of of other spls before but it stop after it tried to update the Radio. For some reason i cant update the radio it always freezes when the update is about 95% complete.
Any Answerss ???? Please =\
Click to expand...
Click to collapse
K, Let's try this, at the point you are now:
Using the zip file from : http://forum.xda-developers.com/showthread.php?t=623141
and the 1.6.2G Recovery from : http://forum.xda-developers.com/showthread.php?t=530492
From your computer:
fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
If you get a Remote Denied after trying the first command, then your current SPL is perfected. However if it works, continue to flash the hboot and recovery.
PS: I have no clue why it freezes during the SPL flashing, "ROM v2.53.707.2 (Engineerings SPL v1.33.2010)" should have flashed just fine on the MT3G LE.

yonkersboy127 said:
Thats every one for helping I really appreciate it.
I tried flashing the Engineering SPL (2010) but i left it as (Sappimg.zip) and when i flash it through Hboot it asks me if i want to start the update after i press the trackball it says System-unzipping and thats where it stays. it doesnt load. and i tried to flash a couple of of other spls before but it stop after it tried to update the Radio. For some reason i cant update the radio it always freezes when the update is about 95% complete.
Any Answerss ???? Please =\
Click to expand...
Click to collapse
Are you sure it is freezing i have read that flashing a radio can take i think up to 5 or 10 minutes and to just be patient.

Grrrrrrr
i have a mt3g 1.2 on tmobile i have tried over and over and over again and it constantly gets stuck on the splash screen its driving me up a wall!!!! any ideas?

junior.youngman said:
i have a mt3g 1.2 on tmobile i have tried over and over and over again and it constantly gets stuck on the splash screen its driving me up a wall!!!! any ideas?
Click to expand...
Click to collapse
I had the problem where no matter how many times I tried the root procedure, it would eventually freeze on the "ANDROID" splash screen and then go to a black screen, nothing else.
I have no idea if this is the correct thing to do, but I eventually went in to recovery and did a Wipe data/factory reset. Then I did the root procedure again and it finally allowed it to boot all the way. Maybe someone who understands better can comment if this was right. Anyway, it worked for me when I basically had no other choice (or so I thought).

From the little bit of knowledge I have so far you did it correctly. If it gets stuck on the load screen or if the screen turns black you usually have to reboot into recovery then do everything you did. If you're flashing a THEMED rom and this happens that means you didn't flash the original rom first. Binary does this with his themes since making roms for mt3g 1.2 is apparently retarded difficult. And just to break it down a little more, he made a themed rom from stokes eclair rom. So I had to flash that rom and then flash his rom since its not a full rom, only a theme. Hope that helped

kbeezie said:
Start here : http://forum.xda-developers.com/showthread.php?t=623141
Make a gold card from this info : http://forum.xda-developers.com/showthread.php?t=622530
Grab the Engineering SPL (2010) from here : http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Put the Engineering SPL onto the new Gold card, in Fastboot go into Hboot mode and flash that
At that point you'll have a new SPL but no rom's gona work. (It'll show up as a 32B, H etc thus why no rom will work)
Then go here : http://forum.xda-developers.com/showthread.php?t=623141
get the zip file with the radio.img/hboot for the fender.
(Download the Recovery 1.6.2G from here http://forum.xda-developers.com/showthread.php?t=530492 instead of the one in the link above)
The instructions from the link above
Grab the MT3GFender32A-Stock-1.0-signed.zip from the link above
Go into recovery and flash that rom.
You'll then have a rooted stock rom. Which is how I rooted my fender. DO NOT use a radio from any other thread than the one I specified, otherwise you have a very strong chance of actually bricking your phone.
The reason you go down to a 2010 Engineering SPL in the first place is because the 1.33.0013 is perfected and you can't flash anything, so least this way you go down to 2010, flash the needed radio/hboot/recovery allowing it to be rooted, then you flash the stock (rooted) rom.
Click to expand...
Click to collapse
Thanks for these steps, I had the exact same problem and you made it easy for me to solve it without searching through 1000's of threads. Kudos!

I'm a little new to rooting my mytouch 1.2 and I follow theunlockr way of doing things and ended up with a phone that get stuck on the htc magic screen i can use fastboot and hboot but no recovery. when in fastboot my phones says
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-3.22.20.17
Oct 21 2009,22:33:27
eh I DON'T KNOW WHAT TO DO YOU GUYS IM GOING INSANE
:/ please help

fastboot flash radio radio.img
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nbo
fastboot flash recovery recovery-RA-sapphire-v1.6.2G.img
fastboot reboot-bootloader[/QUOTE said:
Whenever i try to flash, i get this error
FAILED <remote: not allow>
Click to expand...
Click to collapse

iamjamesxia said:
Whenever i try to flash, i get this error
FAILED <remote: not allow>
Click to expand...
Click to collapse
This is old, use the "Old school" root method in my signature.

Confusion of 32A or 32B while rooting HTC Magic

Dear users,
I wanted to root HTC Magic with the following helpful tutorial.
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
However, I faced a problem about the motherboard version. When I check the motherboard version as tutorial suggested, I saw that it is 32B. However, Recovery Flasher app claims that it is EBI1/32A and it does not allow to flash the recovery image of 32B.
On the other hand, when I checked /proc/meminfo file, it says that
MemTotal: 99708 kB
MemFree: 12068 kB
which is 32B as suggested by Amon_Ra
So, I am confused. Could you please tell me which recovery image should I use? A small background information, I bricked the phone before with rooting procedure by the same reason and gave it back and got it refurbished. So, I am not sure but the motherboard information recorded somewhere else may mislead the Recovery Flasher application.
Thank you,
Omer

Which version of the recovery you should use is dictated by the version of your radio, not motherboard.
2.xx.xx.xx - G version
3.22.xx.xx - H version
hope it helps!

Thank you for the reply. I checked the radio version and it was 3.22.xx.xx. So, I tried the HTC version. However; The recovery manager didn't let me flash with this image. I think, I have the same situation as this post has
http://forum.xda-developers.com/showthread.php?t=680793
But, I didn't yet root my device.
Thank you,
Omer

What exactly spl do you have?
Turn off, then turn on by pressing Back + Power, post first 5 strings.
If you have 1.33.2010 S-OFF you can revert back to radio 2.22.XX.XX

This is the 5 lines.
SAPPHIRE PVT 32B SHIP S-OFF H
HBOOT-1.33.0010 (SAPP10000)
CPLD-7
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Should I root it first or revert back the radio?
Thank you for your help.

Since you have s-off already, just download 1.33.2005 SPL and do
fastboot flash hboot 1.33.2005
and
fastboot flash recovery recovery.img
Wrong forum by the way dude

But before flashing SPL, shouldn't I flash radio? Sorry to ask newbie questions but I am really lost and I don't want to brick the device.
By the way, My device is HTC Sapphire aka HTC Magic. That's why; I wrote in here. Is it wrong?
Thanks.

osaatcioglu said:
But before flashing SPL, shouldn't I flash radio? Sorry to ask newbie questions but I am really lost and I don't want to brick the device.
By the way, My device is HTC Sapphire aka HTC Magic. That's why; I wrote in here. Is it wrong?
Thanks.
Click to expand...
Click to collapse
I did not find any info, when someone did it in the past already. I'm not sure for this, but it looks logical. Anyway, if you don't want brick device - don't use it
You have 2 methods to restore 32B radio and hboot and get ability to flash 32B-roms
Method 1.
As you wrote - you have S-OFF, so fastboot commands are allowed
You can simply run
Code:
fastboot flash radio radio.img
fastboot flash hboot hboot.img
fastboot flash recovery recovery.img
fastboot erase system -w
fastboot reboot-bootloader
where:
radio.img - radio 2.22.19.26I
http://member.america.htc.com/download/RomCode/ADP/GIO/ota-radio-2_22_19_26I.zip?
Unpack it from archive
hboot.img - hboot 1.33.2005 eng s-off (Haykuro DangerSPL)
http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
Unpack it from archive
recovery.img - Amon_RA Sapphire recovery 1.6.2 G version
Important: flash radio then hboot. Don't reboot after flashing only radio.
Method 2. You can use rom.nbh from official update for 32B Magics:
create goldcard
unpack rom.nbh and rename to sappimg.nbh, copy it to goldcard
flash in hboot-mode (VolumeDown + Power)
You will get 1.33.0007 perfected SPL, so you must root device next
But one thing... you have S-OFF - may be you have engineering device - so you can use fastboot commans always - it makes flash-process very easy)

5 thank you for the instructions. This is what i was looking for. If any other experienced user confirms it might work, i would like to take the risks and do the instructions then share the results.
Experienced users, what do you think?
-------------------------------------
Sent via the XDA Tapatalk App

Go for it.

I took the encouragement and gave the first command and unfortunately got this error. I guess, this is not engineering device :/
fastboot flash radio radio.img
sending 'radio' (21504 KB)... FAILED (remote: not allow)

Does anybody has an idea? Please.

Please help. I'm a NOOB, but been managing to install the ROM specific for MT3G/Fender, but I want to know if I'm able to do more with my myTouch 3.5mm Jack version. This is what I have:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.013 (SAPP31000)
CPLD-13
OCT 21 2009, 22:33:27
When I try to install a ROM with 32A listed, it doesn't boot. Can someone please help me understand what phone I have and what ROM's are compatible with it?
I would appreciate it very much, THANK YOU

stlouie65 said:
Please help. I'm a NOOB, but been managing to install the ROM specific for MT3G/Fender, but I want to know if I'm able to do more with my myTouch 3.5mm Jack version. This is what I have:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.013 (SAPP31000)
CPLD-13
OCT 21 2009, 22:33:27
When I try to install a ROM with 32A listed, it doesn't boot. Can someone please help me understand what phone I have and what ROM's are compatible with it?
I would appreciate it very much, THANK YOU
Click to expand...
Click to collapse
You have T-Mobile MyTouch 3G v1.2
Read these topics:
http://forum.xda-developers.com/showthread.php?t=622530
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/

Thanks 5, just wanted to make sure so when I'm installing ROMS, I know which ones will work and the ones that are not for my phone

stlouie65 said:
Thanks 5, just wanted to make sure so when I'm installing ROMS, I know which ones will work and the ones that are not for my phone
Click to expand...
Click to collapse
Mmm. It's hard. All ROMs for MT3G 1.2 marked [mt3g 1.2] or something special
You must not use [32A]-marked ROMs
Forum need to be restructuzired...

Thanks for that VALUABLE TIP. That's good to know also. I've noticed you have S-OFF H and I have S-ON G, is my less or what? Haven't found anywhere that could explain the configurations properly

stlouie65 said:
Thanks for that VALUABLE TIP. That's good to know also. I've noticed you have S-OFF H and I have S-ON G, is my less or what? Haven't found anywhere that could explain the configurations properly
Click to expand...
Click to collapse
S-OFF - it is hboot without security. It means, that everyone can use fastboot commands without any warnings.
Magics have S-OFF, if it developer or engineering device OR if hboot patched by someone
There are some patched (engineering) hboots for Magics, but not for [MT3G 1.2]
In manual to root patched hboot is using, but if you stay with it - touchscreen does not work. Don't know why.

Thanks 5. I believe I'm good now, just have to be patient and await the arrival of new ROMS for my MT3G 1.2
Appreciate all your assistance in helping understand better about my phone.

5[Strogino] said:
I did not find any info, when someone did it in the past already. I'm not sure for this, but it looks logical. Anyway, if you don't want brick device - don't use it
You have 2 methods to restore 32B radio and hboot and get ability to flash 32B-roms
Method 1.
As you wrote - you have S-OFF, so fastboot commands are allowed
You can simply run
Code:
fastboot flash radio radio.img
fastboot flash hboot hboot.img
fastboot flash recovery recovery.img
fastboot erase system -w
fastboot reboot-bootloader
where:
radio.img - radio 2.22.19.26I
http://member.america.htc.com/download/RomCode/ADP/GIO/ota-radio-2_22_19_26I.zip?
Unpack it from archive
hboot.img - hboot 1.33.2005 eng s-off (Haykuro DangerSPL)
http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
Unpack it from archive
recovery.img - Amon_RA Sapphire recovery 1.6.2 G version
Important: flash radio then hboot. Don't reboot after flashing only radio.
Method 2. You can use rom.nbh from official update for 32B Magics:
create goldcard
unpack rom.nbh and rename to sappimg.nbh, copy it to goldcard
flash in hboot-mode (VolumeDown + Power)
You will get 1.33.0007 perfected SPL, so you must root device next
But one thing... you have S-OFF - may be you have engineering device - so you can use fastboot commans always - it makes flash-process very easy)
Click to expand...
Click to collapse
I am trying to do method 2. But I couldn't find rom.nbh from official update for 32B Magic. Could any body tell me where I can find it?
Thanks.

[Q] need help fixing my phone

hi sorry if this post is in the wrong place...
ok this is my problem i put a new radio on my phone 6.35.10.18 and now i can only get fast-boot working no recovery no ROM i have try'ed to re-flash with my gold card but it just crashes when it gets to installing radio my phone is a htc magic (vodaphone)
sapphire pvt 32a ship s-on h
hboot-1.33.0009 (sapp10000)
cpld-10
radio-6.35.10.18
may 8 2009,21:02:32
i changed the radio with Radio Switcher v."GUI 4.1" from the forum
so i need to no if it can be fixed and also pointed in the right direction
thank you

I could have sworn Voda UK sells 32B phones. If I'm right, you just flashed the wrong radio. Find yourself a 32B sappimg and fix it.

ok tryed difrent ones just says its to old. and my goldcard with the sappimg.zip works until it starts to flash the radio (thats the sappimg i used to mod my phone in the first place) so now i dont no what to do at all. seems like it wont let the radio be flashed any ideas anyone. thank you.

Moving to General

ok this is begining to bug me now tryed to fix it for days now with no joy is there anyware i can send it to get it fixed or should i just bin it.

I have seen many with the same problem!
The problem lies in that you have wrong radio/spl combo!
To solve this you have to flash the right spl to match the radio. Then you flash the right set of matching radio and spl.
In your case that's not possible. You have a perfect spl, which will not allow you to flash anything!
So you are stock in the middle. Flash using a goldcard will result in the same thing. Whenever you try to flash a different radio, your system will reject it because of the bad radio/spl combo. That's why all your attempts failed.
The only thing you can do is to try to modify the sappimg.zip.
Make a copy of it to somewhere on your harddisk.
Using winrar or any zip tool delete the radio.img file inside the sappimg.zip.
Then try to flash it using the goldcard like you used to.
This way, you only flash the spl without radio and maybe you will have success. Just make sure that the spl is matching the radio.
Good luck

first off thank you for replying i tryed what you sead i removed the radio out of sappimg.zip and what happens now is it reads the sappimg when its finnished it just reterns back to hboot so it dont ask me if i wont to flash do you have anyoter ideas or is there some way i can get it back to the original 1.6 then just run the gold card agen to get it back to where i was befor i mesed it up with the radio witch i will defo not be putting on agen. thank you.

try this.
in fastboot mode type in a command promt:
fastboot update sappimg.zip (use the 1 without the radio)
See if that helps

hi agen tryed what you sead all i get is failed to load sappimg.zip not sure if im doing anything wrong [ c:\android-skd-windows\tools>fastboot update sappimg.zip
error: failed to load 'sapimg.zip' ]
not sure if im missing something the sappimg.zip is on root of the sdcard phone is on in fastboot mode. p.s taken the radio out of sappimg.zip

no not like this.
You must have sappimg.zip in the same folder as fastboot.
This is by default the tools folder inside the sdk bundle.
Or you can provide the full path to the sappimg.zip.
Good luck

ok i have followed what you have sead i put sappimg.zip in to tools folder and this is what i get makes no sence to me but may mean something to you.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\media server>cd C:\android-sdk-windows\tools
C:\android-sdk-windows\tools>fastboot update sappimg.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
C:\android-sdk-windows\tools>
just tryed it with the radio in and i get this.
C:\android-sdk-windows\tools>fastboot update sappimg.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
error: failed to access zipdata in 'Å└FE┼¶Zâ◄dS▬üÜç►ìÙí█å♦*|┌ÉÖ├Ð‼Ó‼V¡°┤═‗─?ðêm¾
╔âh[ðtbæ└├¼©Óh7Ñ♫║∟ä7╦2f¹:µþ~ |d⌂1¡ç~C²▬ıÉ↕J¬┬Û♦ÔÉ▬%~ñÿ½EÃsµUéÛÔ╗§Z┼5┴+éH▄↕→(ð
½│HÓUîp'
C:\android-sdk-windows\tools>

And what is the end of this?
I need Infos please.

Well... it's only experimental.
I have noticed that some devices will accept the sapphire.zip file even if you have modified it. That's more if you only delete files from it, not add or exchange.
So the trick is to delete the radio.img making sure that the spl updates but the rest will fail... But we don't care about the rest... we only want to update the spl.
I will try it out as the last option. Remember, it's only experimental :0)

Got your PMs...
I have found a solution for your problems..
Ok... here it goes.
Download these to begin with while you READ.
https://rapidshare.com/files/454052569/2.10.531.4.zip
http://rapidshare.com/files/450996411/special_sappimg.zip
http://rapidshare.com/files/436753940/2.53.707.2_-_sappimg.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is that the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
But the problem lies in the following. All the RUU/sappimg with a spl compatible with the 6.35 has a higher version than yours(starts with 3 something). If we update the version, we cannot flash the desired sappimg which follows. The goldcard will only update up in verion nr, NOT down.
Here comes the trick: I have found a special rom, which is part of a 2-part update which will not update your version nr...
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard. I recommend to flash one with a eng spl inbuilt like the 2.53.707.2 sappimg. But in if the device would not accept that sappimg(don't ask me why), try the 2.10.531.4.zip which is the same version as you have now.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, you should rename the 2.53.707.2_-_sappimg.zip to sappimg.zip and flash it using the goldcard. This image should give you an eng spl. If you device will not accept it, then rename the other rom to sappimg.zip and flash it using the goldcard.
5) If you indeed get the eng spl, then you have full control and we can do almost anything we want. Just post here and we can take it from there. The eng spl has the following nr: 1.33.2010.
If you flashed the stock rom, then you only need to flash custom recovery and you should almost be there... also here post the progress and we will take it from there.
Hope that you will succeed... :0)

Is there a recovery-RA-hero-v1.7.0.1 for 32A with 6.35.x.x radio and 1.76.x SPL

Hi everyone.
I saw http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
that the latest recovery for 32A with new radio and spl has only 1.62 recovery.
Am I miss the 1.7 or it hasn't come out yet?
will it come shortly?
Thanks

Download my fastboot commander (magic version)....
It should have all the newest files for magic... plus you can use the tool to many things :0)
Check out my signature

mumilover said:
Download my fastboot commander (magic version)....
It should have all the newest files for magic... plus you can use the tool to many things :0)
Check out my signature
Click to expand...
Click to collapse
Hi, I flash the new version recovery from your link.
I am 32A machine.
but it's Strange, I can see the recovery once and only a black screen shown after reboot.

[Q] Have I bricked my HTC Magic?

I have the HTC MAGIC
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)( OLD )
CPLD-12
RADIO-6.35.08.29 (NEW )
Oct 21 2009,17:27:03
on the recovery, fastboot, but not on the android, HTC logo hangs at MAGIC
Not the brick is it?
rom which have error "main cũ version" or "Partition update fail"

What your version nr?
Code:
fastboot getvar version-main

version-main: 3.04.401.2
machines are now hanging in the HTC MAGIC logo
[1] BOOTLOADER - OK
[2] SPLASH1 - OK
[3] RECOVERY - OK
[4] BOOT - OK
[5] SYSTEM - Fail-PU
[6] USERDATA - OK
Partition update fail!
Update Fail!
help me !!!

You have radio/spl mismatch...
You got to fix that before you can proceed.
Follow my instructions:
Download this to begin with while you READ.
http://rapidshare.com/files/45099641...al_sappimg.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
Here comes the trick: I have found a special rom, which is part of a 2-part update.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, we need to flash the stock rom and you should almost be there...
Post the progress and we will take it from there.
Hope that you will succeed... :0)

thank you very much, I will try and report back
what is "we need to flash the stock rom and you should almost be there..." ?
Can you give me a rom link fit?
a bit sorry for bad english, I'm a Vietnam

you should probably use this tool next time: forum.xda-developers.com/showthread.php?t=794450

Hi,
I have the same kind of problem.
I have a 32A and I installed the wrong radio/SPL
I have the SPL : 1.33.0013d and the Radio 2.22.27.08.
Can I do this manipulation too ? :
mumilover said:
You have radio/spl mismatch...
You got to fix that before you can proceed.
Follow my instructions:
Download this to begin with while you READ.
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
Here comes the trick: I have found a special rom, which is part of a 2-part update.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, we need to flash the stock rom and you should almost be there...
Post the progress and we will take it from there.
Hope that you will succeed... :0)
Click to expand...
Click to collapse
For information, my version is 2.16.181.1
Thank you !

7ictor said:
you should probably use this tool next time: forum.xda-developers.com/showthread.php?t=794450
Click to expand...
Click to collapse
Thank !
My phone is the S-ON should not apply the above method

anhvaem_n2s said:
thank you very much, I will try and report back
what is "we need to flash the stock rom and you should almost be there..." ?
Can you give me a rom link fit?
a bit sorry for bad english, I'm a Vietnam
Click to expand...
Click to collapse
Just do the first step and the rest will come... i don't want to overload you with information....
7ictor said:
you should probably use this tool next time: forum.xda-developers.com/showthread.php?t=794450
Click to expand...
Click to collapse
anhvaem_n2s said:
Thank !
My phone is the S-ON should not apply the above method
Click to expand...
Click to collapse
As he states, the tool (which is programmed by me and a newer version is to be found in my signature) is only valid if you have an eng spl or s-off.
The steps i gave is to fix the mismatch which is the primary problem now... all other solutions will be futile until the issue has been dealt with.

As he states, the tool (which is programmed by me and a newer version is to be found in my signature) is only valid if you have an eng spl or s-off.
The steps i gave is to fix the mismatch which is the primary problem now... all other solutions will be futile until the issue has been dealt with.[/QUOTE]
If my machine is the S-ON SHIP I can do approach of you?
sorry i read but not understand much

mumilover said:
You have radio/spl mismatch...
You got to fix that before you can proceed.
Follow my instructions:
Download this to begin with while you READ.
http://rapidshare.com/files/45099641...al_sappimg.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is: the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big it is ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
Here comes the trick: I have found a special rom, which is part of a 2-part update.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
4) Once the device has rebooted, we need to flash the stock rom and you should almost be there...
Post the progress and we will take it from there.
Hope that you will succeed... :0)
Click to expand...
Click to collapse
Success!
Thank you
Now you help me how to root, I tried z4root, flashrec were unsuccessful,

OK... sense you want root, i can determine that you have a working system...
For root and other stuff, read my guide found in my signature :0)

how to change my machine S-On the way S-OFF
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.76.0013 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Oct 21 2009,17:27:03

Again.... do you have a working system?
Do you have a custom recovery?