Related
Quick question, I have an 2GB (Non-class 6 SD card) and it was working okay with my G1 phone. I partitioned it with no problem, have apps, themes, roms, basically the whole nine yards on it. I recently just purchased a new 8 gb 6 class SD card and was wondering if Paragon Manager or any other program can transfer the data over flawlessly? I know I have to create a new ext3 part (probably using paragon manager) and then transfer all the data over...but was wondering if anybody else did this before without running into any issues and what was the overall process you took? I appreciate any help. Thank you.
no issues here, done it a couple times. didnt use paragon though. used ext support on my mac to copy all files from both partitions, then format the card using GParted on my Slax USB. then put my files back, inserted into g1 and booted the phone. cyanogens MOD works great with it.
malaeus said:
no issues here, done it a couple times. didnt use paragon though. used ext support on my mac to copy all files from both partitions, then format the card using GParted on my Slax USB. then put my files back, inserted into g1 and booted the phone. cyanogens MOD works great with it.
Click to expand...
Click to collapse
Quick question for you, did your apps still show as installed in the market when you swapped cards? I have been meaning to get my 8GB cards (I have a few with tv episodes on them) set up so I can swap between them and my 16GB at any time, but this question is one that is keeping me from trying yet (that and a lack of time).
Thanks.
insert original card and do not mount it (or unmount it if auto),
dd if=/dev/sdcardfile of=/home/yourusername/tmpsdbackup
swap cards and do not mount it (or unmount it if automatic),
dd if=/home/yourusername/tmpsdbackup of=/dev/sdcardfile
Then run gparted, move your ext partition to the end of the disk and expand your crap32 partition to max.
wait so do i just partion my 8 gig c6 and than copy all files off my other sd card and i should be able to boot up, of course redownload everything or should i not try that
and when i say copy my files ove3r just the ones on my sdcard not all my apps
Goog1e Phone said:
Quick question, I have an 2GB (Non-class 6 SD card) and it was working okay with my G1 phone. I partitioned it with no problem, have apps, themes, roms, basically the whole nine yards on it. I recently just purchased a new 8 gb 6 class SD card and was wondering if Paragon Manager or any other program can transfer the data over flawlessly? I know I have to create a new ext3 part (probably using paragon manager) and then transfer all the data over...but was wondering if anybody else did this before without running into any issues and what was the overall process you took? I appreciate any help. Thank you.
Click to expand...
Click to collapse
I used Partition Manager to partition my 8g Sd card into a Ext3 partition. What I did was just wipe, reflash my ROM (Cyanogen's 3.4) and reinstalled all the apps from the Market. It seems like it would take forever, but it really didn't.
The reason why I reflashed was because when I changed SD cards originally, it stopped reading all the original files from the original SD. All-in-all, it was very easy to just: Wipe, Reflash the ROM, then reinstall apps from Market, which should still be listed under Downloads.
how do you format an ext3 partion
Hello everyone,
I recently got an HTC aria from AT&T.
After a few days I went ahead and rooted the phone.
At first I decided to try the liberated Aria (éclair) rom. It was a good experience. But just last night I decided to try another rom, so I went with Cyanogenmod 6.1.1.
While I was using liberated aria, I used rom manager to partition my sd card with the ext filesystem, so I could move some apps to it and open up some space from my phone's internal storage.
This space, while I never figured out how to move the apps, always showed in titanium backup.
With the move to Cyanogenmod 6.1.1, this partition doesn't show at all!, in fact my sd card is at 1.7 Gb!, it's like I lost an extra 0.25 Gb (which is the partition size I chose in rom manager before)... I tried partitioning in cyanogenmod with rom manager again, but then my sd card took another 0.25 Gb hit and went to 1.5 Gb!...
How do I get back to my 2Gb sdcard space? furthermore how I do partition the card such that I can extend my internal storage for apps?
Thanks
Andres
I use gparted on linux to do that. I'm not sure what OS you use, but there are live cds you could use.
But on gparted, you should be able to see all the partitions on the card and manage them as necessary.
In order to use the ext partition, you should darktremor's app2sd. Ext3 is the filesystem you should use, but ext2 works as well I believe.
Sent from my Aria - CM7 Build 2-4
thanks, I use Debian Squeeze on desktop and testing on laptop.
I just got gparted, but it says my external storage is only 1.7 Gb!
Like I said...the extra 0.25 Gb is no longer being mounted with the sdcard and it somewhere lost in the filesystem and/or apportioned to some obscure directory...
Hmmm... that is quite odd. I know some sd cards aren't actually what they state. My 8GB card only shows as 7.8GB for example.
Try formatting the whole card (Back up first!!) And see if it comes back somehow. I am not a sd card expert.
Sent from my Aria - CM7 Build 2-4
L551 said:
Try formatting the whole card (Back up first!!)
Click to expand...
Click to collapse
thats what i'd recommend.
when you installed cm6, did you do a wipe data? did you notice if it said it was wiping the ext partition? i'd guess cm6 isn't noticing the space because it was partitioned separately from the rom install.
backup your important data, format the card, and try repartitioning it again now that you've got cm6 installed.
well I'm not entirely sure why it worked this time, but I was able to fully format the card. Now I'm back to 2Gb (well, really 1.84 Gb, but that's right)
The problem I think was that I was formatting with Rom manager, and it was ignoring the extra unrecognized space. What I did different this time, is that I went into settings > sd card & storage > unmount sd card > format sd card > mount sd card > sucess!
So this successfully formatted the whole card.
Thanks for your pointers
Unfortunately trying to partition it again failed.
I tried gparted and it successfully formatted a part of the card with the ext3 filesystem (while leaving the rest as unallocated -- at least this is what gparted said). Unfortunately when mounting the sd card on my phone it complained that the card had been damaged. So I had to reformat it, undoing the previous partitioning.
Then I tried rom manager again, but the way it works is by going into recovery and partitioning the card there. Unfortunately, clockworkmod recovery showed a warning sign ( triangle with an exclamation mark in it) above an android and froze there...I had to pull the battery out to reboot my phone.
I guess my oldish version of gparted (0.7.0) doesn't like the YAF filesystem (YAFFS). So perhaps when it partitions the card, it screws up the existing YAFFS partition. I'll try to use gparted again to partition the card fully, 256 Mb ext3 as extra app storage and the rest, I guess ext3 as well.
Andres
I finally did get it to work on both R012 and FR008 (as well as CM6.1.1 and CM7)
I formatted the sdcard with gparted (chose a 512 Mb ext3 partition with 32 Mb Swap). Then from android's terminal emulator (as root) I typed
Code:
a2sd check
and it enabled apps2sd using darktremor just fine. It became aware of my ext3 partition.
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Bambam01 said:
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Click to expand...
Click to collapse
I recommend just writing an image file with winimage. Then writing it to a 8gb card, then using Easeus Partition manager to expand the last partition to full 8 gb.'
Do you boot from the SD card or eMMC?
If it's the latter, just copy the contents of the old card to the new one.
If it's the former, I recommend a fresh install; use a backup program (MyBackup, Titanium Backup) to back up your Apps and Data and then restore when you're done with the fresh install.
I'd like to do this as well.. in response to previous reply.. there are 4 partitions (boot, 2 other and last one with your data) do I have to create 4 different images with winimage or just for the first boot partition or does the winimage creates the image of the whole msd card?
The winimage will create a 4 gb image of your card on the 8 gb cards including existing partitions. What you'll need to do is get the largest partition to expand to the whole card. Assuming that the 4gb install on SD is the same as an 8 gb install if you did it fresh.
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Phatdawg said:
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Click to expand...
Click to collapse
That's a good point, the Size-agnostic SD installer uses different partition sizes for everything except the boot partition depending on the size of the card.
I tried winimage first to see if it even worked. Which it didn't. I didn't try to expand the existing partition. It just booted as a normal nook. You would think this would be a easy process but.... Lol, always new challenges. Guess that's why I enjoy doing this.
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Bambam01 said:
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Click to expand...
Click to collapse
I have done this several times, and I recommend downloading easus todo backup free. Then place both sdcards in a card reader, run todo backup and just copy the 4g to the 8g and expand the fourth partition right there in todo.
This applies especially if you want to copy to same size sd's, as you will not run into the usual image sizing issues.
Hope this helps
I don't know what you're doing wrong. before expanding the partition, make sure the sd boots, if it doesn't, then there's a problem with image being read or written as opposed to the partition.
I also had a problem with a new SD card not booting that I fixed by using the nook (that is the core nook OS) to reformat the card, then put the image onto the SDcard (shouldn't have changed anything as far as I know, but it did anyway).
Ok I tried this and it worked flawlessly. Used win32diskimager to "read" my 4gb sd with cm7 image. and then used "write" to 8gb sd card. It cloned 4 gb original image with 4 partitions and one unused partition of 4 gb. After that used easeus partition manager(latest version) to format unused pattition to fat32 and then merged with last partition of 2gb (move/resize) ..so now I have 6 gb of data partition which i can use to transfer files or move apps from nook's internal drive. The new 8gb card with cm7 image booted without any issues keeping my original settings of 4gb. One thing to mention that somehow it did not work on one pc with windows xp (kept getting write error on win32diskimager program)but worked on my laptop with windows 7.
That is exactly how I have done it in the past as I described in my first post. I don't know why a person would have trouble with it unless there was a format issue (i.e. ntsf, etc).
Hi,
I wonder if someone can help me, I've got WP7.5 install as a NAND installation, with Android 4.0.4 as a SD installation. Both work brilliantly, although I do have some slight problems.
Android won't detect an SD card installed, so I can't use some apps, that require an SD card to be present.
Does anyone know if there is a fix for this, surely I'm not the only person in this position.
Cheers
I'm guessing it's because your SD has been formatted specially by WP, and Android can't read this. Your FAT32 partition is probably too small for anything to be stored in it.
The Fat32 partition is 1.6Gb.
Is it worth making that bigger, or creating another FAT32 partition?
Cheers
Hmm, I'd guess that you wouldn't have any more than 200-300MB free on your SD as read by SD Android then. I don't know how much an SD Android build takes up but the data.img is at least 1GB of that. As for increasing the partiton/creating a new one, I don't actually think that's possible without losing your data is it?
Hi,
Thanks for your help.
I'm not too fussed about losing anything...
Here is what I have just tried without any success.
I have a 8Gb card partitioned like this.
1.*Gb
Primary, FAT32, (Android SD install)
2Gb
Primary, FAT32, (My hope would be that Android would see this as the SD card)
4Gb Other (WP 7 partition)
No luck unfortunately, any ideas?
Cheers
Are you sure you're using an 'unlockable' WP7.x ROM? If so, try formatting the storage card to normal and flash a Android build, see if it utilises the memory card like normal, if it does, then I would say that you're doing something wrong when setting it up.
Just double check each step of a tutorial (example: this one) twice and hopefully you'll only have to flash one more time.
Why do you have 2 fat 32 partitions ?...just use one fat 32 partition..in regular sd android....data image is used as internal memory and fat 32 part as sd card
I believe your second partition is not being recognised...make only one fat 32 partition you don't need two
Sent from my HTC HD2 using Tapatalk 2
Hi! Successfully rooted my Nook ST using Nook Manager, except I used a 32 GB micro SD card to do the rooting. After rooting, I ended up with two partitions on the SD card, Nook (239 MB) and Nook Manager (62.9 MB). I was wondering what I need to do to be able to utilize the rest of the space on the card? The reason I bought a 32 GB card was so I could store all my sideloaded books there, and now I find I'm just limited to the space/partitions showing up when I connect the nook via USB.
You need to repartition your card.
Partition Magic can do that.
If you want to use multiple partitions on the SD card (like 2 x 16 GB) you might want to look at:
http://forum.xda-developers.com/showthread.php?t=2184495
Renate NST said:
You need to repartition your card.
Partition Magic can do that.
If you want to use multiple partitions on the SD card (like 2 x 16 GB) you might want to look at:
http://forum.xda-developers.com/showthread.php?t=2184495
Click to expand...
Click to collapse
Thanks, will download a copy of Partition Magic later. I really am completely clueless when it comes to programming though. In fact, I'm only here because the folks at mobileread told me I'd probably have better luck having my question/s answered here than there. So just to confirm, I can repartition the drive using partition magic so I'll have one extra partition for the books I want to sideload, and I'm good to go already when I re-insert the SD card into the Nook? Or do I have to attempt the code that you gave in the thread you linked?
If you want to have a single FAT partition on your SD card you can do that without much change.
It comes down to whether you want to be able to pull the SD card and plug it into random desktops and things.
If you want to have multiple partitions or ext3 partitions you will have to use the new vold in the link above.
if used windows 7,8. Insert a memory card into the card reader. Go to cmd(administrator mode) and run command:
Diskpart
List Disk
Select Disk 1 (#select sdcard)
clean (#clean partition sdcard)
create partition primary
active
format fs=fat32 quick
assign (#run command if not view sdcard in mycomputer )
Renate, I tried to repartition my SD card, but got a "disk is not formatted, do you want to format it now?" message. So I had no choice but to do a data recovery using EaseUs Partition Master first, then went ahead and clicked format now. Then I tried using Minitool Partition Wizard (couldn't find a free version of Partition Magic) to create new partitions in the formatted SD card so that the NookManager partition would be larger (27 GB) while the NookBackup partition would be 2 GB. Except that I can't seem to create any new partitions at all. And I also have no idea how to restore the data I'd backed up earlier either.
Sorry, I missed seeing this come up when you posted it.
When your Nook asks you if you want to format you should say "No!".
It could be that it misidentified the situation.
In any case, you want to look closer before formatting anything.
Here's a gotcha.
If you are using ext3 and the internal clock has reset itself then the last mount will be in the future.
That makes things angry. Check that the date/time on the Nook is correct.
You can use gparted to give the card the partition layout you need (i.e. first NookManager partition is big, second NookBackup partition is only large enough to hold a backup), then write the first partition from NookManager.img into first partition of the card (you need to do something roughly similar to this. Then you can use gparted to set the "boot" flag on the first partition and use the card to backup&root your Nook. Then remove the "boot" flag, and keep using the card for storage (it's a bit messy to have both user&app files AND NookManager boot files in the same place, but if you only have one card, then this is inevitable - i haven't found a way to mount the second or the third partitions from the card). The card will act as normal storage device when flag is not set, and as NookManager bootable card when flag is set.