Database Users

[Q] Nook Color Boot Loop Even with CWM bootable SD

Hi,
I've searched the forums but haven't found a solution to my problem. I rooted my Nook Color (1.1.0) using auto-nooter 3.0. Everything worked fine, then I tried to flash to CM7 using CWM. When I subsequently rebooted, the Nook goes into a boot loop where it never gets past the "Touch the Future of...." display before it reboots.
I've can't get into ADB because the unit reboots before I can get access. Also tried booting into CWM (3.0.0.5 and 3.0.1) on an SD Card. When I do this, it shows the "loading..." display for a few seconds then reverts to the boot cycle. Also tried nooter 0.2 but same result.
Tried doing 8 successive boot cycles by trying to turn it off before it reboots, but no luck.
I've noticed that others have had boot issues also, but it seems that everyone else has been able to eventually boot back into CWM via SD card.
If anyone has any suggestions, I would definitely appreciate the help.
Thanks.

I experienced this exact problem and never did get it working. I was running Nookie Froyo on SD with overclock when it suddenly started rebooting. Doesn't matter if the card is in or out, it gets to the point you describe and reboots. All of the "restore to stock' tricks failed because it keeps rebooting, even when booting into CWM from SD. I ended up replacing it with another new NC and put the the first one in storage hoping I someday figure out the problem. I've never found anyone else with quite this problem. I'll be anxiously watching this thread!

Not sure whether I should start to panic because you never got it working, or feel relieved because I am not the only one to experience this issue

You can add another person who is having this problem.
Yesterday I asked Rom manager to boot into recovery and that was all she wrote.
The nook gets through "Touch the future of reading," then the screen flashes for a fraction of a second before repeating the process again.
Holding 'n' and power while booting also has no affect; and it seems to ignore whatever is in the SD card slot.

Got it working!
Not exactly how this worked but here is what I did.
First off I used another SD Card Reader Although the idea of using another card reader doesn't seem to make sense; I had seen it on another forum.
I also Used a new uSD card
Used Win32DiskImage to burn the image to the uSD card (had been using DD on a linux box)
The images used was the Clockwork Recovery image (2GB,) look around and you should be able to find it.
I also copied the removeclockwork.zip
This should be available with a google search as well
From there it just worked like it was supposed to. The nook booted off the micro SD card and I used the removecwr.zip
Hope this helps

[q] excited to see twrp 2.0 recovery on our beloved nookcolor!

Ok. Let me start by saying, I'm obviously not an expert on hacking/developing and stuff like that. I just love to tinker stuff so I learn in the process. So definitely not an expert. Just posted this thread hoping that someone whose possibly a lot more knowledgeable than I am would notice it and hopefully shed a light on this question.
Is TWRP 2.0 which can be seen here, working/compatible/available/will be available on our beloved NookColor?
All we are using right now is the ClockWorkMod Recoveries, right? Which I believe the latest is 3.2.0.1. I'm not saying at all that CWM is not sufficient enough to do whatever it needs to do, I just thought it would be awesome to be able to get your recovery things done THAT MUCH COOLER, navigating the device via the touchscreen rather than hardware buttons.
Hope this sparks more awareness!

+1 - I would like to see TWRP on our devices as well, BUT ... I would definitely miss the convenience of being able to install the nightlies directly from ROM manager.
OK, saying that, I also just had a perma-brick on my Nook and am getting a replacement due to an issue that occurred in recovery. I was stuck in the infamous CWR boot-loop, so did a restore, when I went to reboot, screen itself would never come on again - not after charge, not after holding buttons, nothing.
Is it related, I don't know, maybe not, but makes you think.

majorpay said:
+1 - I would like to see TWRP on our devices as well, BUT ... I would definitely miss the convenience of being able to install the nightlies directly from ROM manager.
OK, saying that, I also just had a perma-brick on my Nook and am getting a replacement due to an issue that occurred in recovery. I was stuck in the infamous CWR boot-loop, so did a restore, when I went to reboot, screen itself would never come on again - not after charge, not after holding buttons, nothing.
Is it related, I don't know, maybe not, but makes you think.
Click to expand...
Click to collapse
Oooh, that's too bad. And scary. Makes you worry about doing something that's not tried on the NookColor before. I wont dive in unless the devs really says that it's safe.
Hey, about your NC being bricked. I had something pretty similar happened to my NookColor before. Got stuck into a boot loop. Now before, I had my TitaniumBackup folder stored in the eMMC and I didn't want to do anything that would delete it. What I did is, I had another microSD card and created a bootable CWM. I installed a CM7 nightly on the microSD. Upon booting to the microSD build, I went and have adb wireless transfer my eMMC files to my PC. Now that I've recovered my TitaniumBackup folder, I formatted everything on my NC using the bootable CWM. Then what I did is I flashed the stock NC Rom which was 1.2 version. I did a factory reset. After that I had everything back to normal again. I flashed the nightly build on the eMMC again and from then on, had my TitaniumBackup folder on the microSD. Have you tried creating a bootable microSD?

A little late...
Did you try a formatted bootable sdcard? The nook is near indestructible. I had the same issue and recovered.

fr4nk1yn said:
Did you try a formatted bootable sdcard? The nook is near indestructible. I had the same issue and recovered.
Click to expand...
Click to collapse
Same here, I put together a nookie froyo card, and got bootloops.I took the memcard out and still got bootloops. I put a cwm card in, and STILL got bootloops. Then I made a new cwm card, and it booted just fine.

Silly Noob Part II

I am at a loss. I got this working just fine and then started tweaking things and ended up jacking my NC and restoring it.
I wiped out and reformatted my SD card and did the verygreen method all over again. I want to run CM7 off my SD card. Everything went smooth and I saw no errors.
The first night I charged my NC over night and woke to found the battery drained and it wouldn't charge until I removed the SD card. After that I got the boot loop.
Came home and redid it all over. Once again it worked wonderfully until I restarted my NC and then it gets stuck in the boot loop again.
I have started fresh and have no idea why the issues. I have the latest stable and gapp. Am I doing something wrong in settings? Do I need to mess with ROM Manager at all if booting from the SD card?

Back up and running but still needing questions above answered.
Is there a thread that helps with CM7 or ROM settings after a successful install?
I just want to be sure I am not changing settings that are causing this. I downloaded Nook Tweaks this go around and not sure if that would give me issues. I didn't do this the previous times when I didn't have problems.

jsnake said:
Back up and running but still needing questions above answered.
Is there a thread that helps with CM7 or ROM settings after a successful install?
I just want to be sure I am not changing settings that are causing this. I downloaded Nook Tweaks this go around and not sure if that would give me issues. I didn't do this the previous times when I didn't have problems.
Click to expand...
Click to collapse
What kind of card are you using? Anything other than a SanDisk Class 2 or 4 can cause strange instability.

16GB Transcend Class 6. I guess I will search for a Sandisk Class 4 and see if that doesn't solve everything. One day it works perfect and the next it melt downs when I have made no changes. Maybe you are correct and it is simple as that.

I don't know how you doing but reading what you said ".... until I removed the SD card. After that I got the boot loop.", it doesn't make any sense, maybe you have done something wrong? because booting ROM off uSD shouldn't have any ill effect on the local internal OS.
You still have a boot loop w/o the uSD plugged?

What CM7 version are you using?
Also, are you using Rom Manager, or just Clockwork Mod Recovery directly to install CM7? Idk if things have changed, but when I was on an sd-card install, Rom Manager would always want to install things to emmc so it was easier to reboot into recovery and install updates manually.
I was also using an "off brand" sd card and would get force closes on apps. It might be possible, but I would suspect this is more of an installation issue than something with the card. That said, Sandisks are still supposed to offer the best reliability and performance.

You should only have a normal Nook Color OS come up every time you boot with the uSD out. It sounds like you may have flashed your emmc somewhere along the way.
I had a similar boot loop situation when i was trying to charge over USB with a dead battery (the nook kept restarting and running out of juice mid boot.) It corrupted my emmc CM7 somehow and it was fixed by reflashing once i had charged it from the wall plug.
Verygreen's method doesn't require rom manager.

Sorry for any confusion. I am not having any problem with the NC booting when I remove the card.
I just ordered a 16GB Class 4 Sandisk and I am going to give that a try. This current install is working fine but I haven't messed with any settings really.

[Q] I'm a mess, CM7 back to stock

Hi. Ok so I rooted my NC to CM7 sometime last year, and now with all the blah about markets not working and having to do more about it, not to mention the PIA it is to get books on, I decided to put it back to stock. Which apparently was a big mistake.
First I mounted an older version of clockwork to the SD card, then when I figured that out (having format data error) I did the newer 3.2.x.x one. So that went good, I went through the steps and reformated data and system, and then went to upload the zip from the choose zip part, but it says there are no files. So I backed out, took out the SD and put it in my computer(Macbook pro) to try to put it in again but it wont show up at all? I tried looking in Disk Utility too and its not there. Any ideas where my card is? What do I do next?? I have nook complete restore 1.0.1, 1.0.0 and nook color update 1.4.1 on my desktop, I thought I had 1.0.1 on the SD card.
I've been reading and googling all over, I can't find what could've made my SD card disappear?
Thanks, I know you must get these all the time and I really appreciate your help-

Ok I didn't do anything, but it just started up to the little silver N and is now sitting there? Is that a good thing?

Don't panic. The NC is very hard to permanently brick. From what you've described, it sounds like your SD card may have gone bad or been corrupted. I'd just try again.
The 'n' logo is a good thing, but if it hangs there, be sure you've followed all the steps carefully. That's typically a sign that /data wasn't formatted, though from your description, you got that step.
Sorry I can't offer up anything more specific. Do be aware that you can restore back to 1.3 if you don't want to go back to 1.01

It happened to me and what I did is plugged my sdcard into my android phone and format it and start over again.
I did that couple time during first attempt to install CM7 on my nook
Hope this helps ! Good luck!

Try plug it into different computer(s) along with using usb-adapter.

The Eausus Partition program works well to wipe/format cards too...

[Q] Stuck on Cyanoboot loading screen..

I have a Nook Color that I've used for some time with CyanogenMod 10.2 with no problems. Last night I was looking at the fixes for Netflix since CM currently has a problem with it, and followed the instructions on XDS for the xposed installer (loading Liquid64's NetflixHackPersist.zip). Things appeared to go fine, and it booted into CM again and I ran the app as instructed. Everything seemed fine up to that point.
But on rebooting, the Nook will not go past the Cyanboot screen. Whether I let it boot by itself, or go to the boot menu and select any of the emmc or SD card options, it just sits there saying it's 'loading xxx' whatever option I've selected and never gets past it. I cannot find a way to force it to boot to the SD card to try anything that way.
I've tried 2 SD cards, reformatted and reburned an 8gb clockwork 3.0.2.8 image to make them bootable...so I don't think it's a card problem.
I'd appreciate some help if anyone knows a way around this. I've had experience with rooting and loading from the SD card, but if it always gets to Cyanoboot and I can't get it to even boot the SD card, I'm stuck. (The 8-reboots trick doesn't seem to work..I've likely reworked too much to still do that.)
Thanks,
JT

jttraverse said:
I have a Nook Color that I've used for some time with CyanogenMod 10.2 with no problems. Last night I was looking at the fixes for Netflix since CM currently has a problem with it, and followed the instructions on XDS for the xposed installer (loading Liquid64's NetflixHackPersist.zip). Things appeared to go fine, and it booted into CM again and I ran the app as instructed. Everything seemed fine up to that point.
But on rebooting, the Nook will not go past the Cyanboot screen. Whether I let it boot by itself, or go to the boot menu and select any of the emmc or SD card options, it just sits there saying it's 'loading xxx' whatever option I've selected and never gets past it. I cannot find a way to force it to boot to the SD card to try anything that way.
I've tried 2 SD cards, reformatted and reburned an 8gb clockwork 3.0.2.8 image to make them bootable...so I don't think it's a card problem.
I'd appreciate some help if anyone knows a way around this. I've had experience with rooting and loading from the SD card, but if it always gets to Cyanoboot and I can't get it to even boot the SD card, I'm stuck. (The 8-reboots trick doesn't seem to work..I've likely reworked too much to still do that.)
Thanks,
JT
Click to expand...
Click to collapse
Try using CWM 6.0.4.7.

hwong96 said:
Try using CWM 6.0.4.7.
Click to expand...
Click to collapse
Hallelujah! I followed your link and (though what I saw suggested trying CWM 5.5.04 for CM 10.2) it WORKED!! It booted to the SD card from Cyanboot, and I had a CM 10.2.1 zip that I was able to install and I'm back in business.
Out of curiosity, is Cyanoboot something unremovable, meaning I can never simply boot straight to an SD card as in the past? It did let me get to the recovery on this SD card, so I guess Cyanoboot was actually working and my problem was something else...but if I simply did a factory reset and wiped everything, would that have removed Cyanoboot as well?
If anyone has suggestions, I'm trying to decide if I'll keep this thing or sell it, so I'm curious what the most fully functional ROM (CM or ?) is considered to be these days, if I didn't put it back to stock?
I've loved this Nook, and only got into the earlier predicament because I thought, if I sold it, a buyer might want to use Netflix...so I was hoping to have it working with a ROM that would please the average Joe user who might hit up Youtube, Netflix, etc.
Thanks for the help!
JT

jttraverse said:
Hallelujah! I followed your link and (though what I saw suggested trying CWM 5.5.04 for CM 10.2) it WORKED!! It booted to the SD card from Cyanboot, and I had a CM 10.2.1 zip that I was able to install and I'm back in business.
Out of curiosity, is Cyanoboot something unremovable, meaning I can never simply boot straight to an SD card as in the past? It did let me get to the recovery on this SD card, so I guess Cyanoboot was actually working and my problem was something else...but if I simply did a factory reset and wiped everything, would that have removed Cyanoboot as well?
If anyone has suggestions, I'm trying to decide if I'll keep this thing or sell it, so I'm curious what the most fully functional ROM (CM or ?) is considered to be these days, if I didn't put it back to stock?
I've loved this Nook, and only got into the earlier predicament because I thought, if I sold it, a buyer might want to use Netflix...so I was hoping to have it working with a ROM that would please the average Joe user who might hit up Youtube, Netflix, etc.
Thanks for the help!
JT
Click to expand...
Click to collapse
If you installed CWM 6.0.4.7 to emmc and want to return to stock go to Leapinlar's tips item A12 on how to return to stock recovery. Or item A15 to flash BN stock recovery using CWM.
http://forum.xda-developers.com/showthread.php?p=25354258#post25354258