Hello.
I was trying to root my HTC Wildfire today but when i was downgrading my phone software from 2.2.1 to 2.1 my touch screen did not work ...
How can i get it back to normal ?
All buttons works its only the screen and the 4 touch buttons that does not work.
Please help me since i cant afford a new phone atm.
Check this thread;
http://forum.xda-developers.com/showthread.php?t=1011748
Thank You very much ...
Problem solved
Not Work! Please Help Me (
Related
I have upgrade my P3650 - its a pola100 - from the original rom to another with wm6.1.
it works great. no problem but after a week the touch screen started to work bad. when i wrote a sms i had to press the screen harder. a few days later. the screen not respond perfectly. and now it dosnt work.
i think that it was death. i reset it but i cant config the os. i touch the screen very sofly and the screen respond but i cant calibrate. i cant use it i´m getting seek!!. sorry for my english i speak spanish. please if anyone understund please respond.
Try flash the original ROM, if you can.
Do a hard reset as described here http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset_en.html
To make sure you get the best help possible better to say which 6.1 rom you installed
I had the same problem. When i uprgraded to 6.1 screen was harder to press. When pressing number one, two was picked. After a while this became worse. Eventualy screen was not responding anymore. Sent it out for repair, back in one week. Now no more problems, fix was within warranty, so no cost. Now new screen
the rom i installed is m-amine 2.0
the rom i installed is m-amine 2.0
....
the service tell you what happend?
i see
rspillo said:
Try flash the original ROM, if you can.
Click to expand...
Click to collapse
}i would like to try the original rom.} any of you know where could i find it .
HTC Touch Cruise P3650 (HTC Polaris 100) ...
Look here, there are some official ROM:
http://forum.xda-developers.com/showthread.php?t=373233
Hi guys i need some help if anyone can guide me how to fix my problem. I have an htc touch cdma it has been working fine for more than a year but recently it started rebooting some times or if it reboots it doesnt start again and i have to remove battery and other thinks for it to start. Reading the forum here i got some info about bricked phones so i used the gold card but i dont have the shipped rom because i parchased the phone as a used one. Any of u guys backup his phone before upgrading it and can send me a link to get the shipped rom that would be very helpfull or any other sugestions on my problem and how to fix it and also how to remove the ( test only ) screen that has from the gold card use.
Thanks in advance for all the work u guys are doing and i am really sorry if i am bugging you with my problem
u shouldnt have used the goldcard, that for solving a completely different problem. if your phone starts then it is NOT bricked.
u have to do a lot of reading to get some facts straight, anyway i think u have a hardware problem.
u have a vogue (touch cdma) this forum is for the elf (touch gsm).
so, go to the proper forum: http://forum.xda-developers.com/forumdisplay.php?f=389
and ask there
MOD EDIT
Moved to vogue forum
Hi
I flashed windows 6.5 rom on my htc touch elf.but but after restart my touch has gone blank.it only shows a white screen with 2 unuable button at the bottom of the screen.ne of them is menu and other one delete.Active sync is not working so cannot install install any rom on it.can any one please help me with that?
thanks
try the elf forums http://forum.xda-developers.com/forumdisplay.php?f=372
oamalik said:
Hi
I flashed windows 6.5 rom on my htc touch elf.but but after restart my touch has gone blank.it only shows a white screen with 2 unuable button at the bottom of the screen.ne of them is menu and other one delete.Active sync is not working so cannot install install any rom on it.can any one please help me with that?
thanks
Click to expand...
Click to collapse
Put the device in bootloader and flash back to stock. Also, make sure that you go to the forum posted above since this is the Vogue forum and not the Elf.
hi there. i bot htc hd2 eu version and install nand android ROM.everything just worked fine before week ago.from then back and home buttons start not working like working not working.i tried several ROM'S and again the same no meter sense or not sense. couple days ago the buttons stop working at all. finally i get back to stock WINMO and again the same problem the buttons dont work.
any suggestions for this or to try replacing them?
thanks upfrontly....
mmarjan said:
hi there. i bot htc hd2 eu version and install nand android ROM.everything just worked fine before week ago.from then back and home buttons start not working like working not working.i tried several ROM'S and again the same no meter sense or not sense. couple days ago the buttons stop working at all. finally i get back to stock WINMO and again the same problem the buttons dont work.
any suggestions for this or to try replacing them?
thanks upfrontly....
Click to expand...
Click to collapse
might be a hardware problem, if you have warranty for the device get it replaced. if not you might have to find someone local to fix it.
good luck
Hi guys i have a htc hd2 it had android but then i used task29 and installed the original windows 6.5
If im starting the phone new the touchscreen works perfectly, reallly long perfectly, but if i lock the phone and try to unlock >( slide the slider)
it does nothing.... help me pls what is my problem?
The touchscreen works perfectly after a restart ( because there i dont need to unlock the phone )
after locking it does nothing..
Sorry for my bad englisch
osman9 said:
Hi guys i have a htc hd2 it had android but then i used task29 and installed the original windows 6.5
If im starting the phone new the touchscreen works perfectly, reallly long perfectly, but if i lock the phone and try to unlock >( slide the slider)
it does nothing.... help me pls what is my problem?
The touchscreen works perfectly after a restart ( because there i dont need to unlock the phone )
after locking it does nothing..
Sorry for my bad englisch
Click to expand...
Click to collapse
There may be problen with the rom
Sent from my HTC HD2 using xda app-developers app
Try re-doing the task29 process to a fresh install again.
I no longer have an HD2, so my little knowledge is gone. ...
Sent from my LG-VM670 using Tapatalk 2
Are you locking via endkey !?
If so try avoid using endkey & see if screen works better.
If so I would expect it related to digitizer cable & connector bonding is failing, cable runs close to end button thus movement & pressure in this area effects it.
Do a search on digitizer failure, loads of threads as a huge common problem.
Do make the effort to try another ROM if doubts on cause remain & eliminate software/firmware before going the hardware route.
osman9 said:
Hi guys i have a htc hd2 it had android but then i used task29 and installed the original windows 6.5
If im starting the phone new the touchscreen works perfectly, reallly long perfectly, but if i lock the phone and try to unlock >( slide the slider)
it does nothing.... help me pls what is my problem?
The touchscreen works perfectly after a restart ( because there i dont need to unlock the phone )
after locking it does nothing..
Sorry for my bad englisch
Click to expand...
Click to collapse
Use task29 again, check your radio rom (2.15.50.14) and install different original or custom windows mobile 6.5 rom. i guess, it depends on your windows 6.5 rom(romda problem olabilir, başka bir custom rom veya orjinal rom bul dostum).