Related
Was fiddling around in the settings, hit check for system update, installed a >20mb update, and now my tab is stuck on the Acer boot screen with the text "booting recovery kernel image" in the upper left corner.
Anyone else had this problem?
Should I leave my tab for a few hours and hope it boots, or force a restart?
update:
held down the power button for about 5 seconds and reset with no problem.
"Update failed" window on reboot.
System update 4.010.13 (14.49) update still available when I go to system update->check now.
Currently running build 4.010.10
Does anyone have info on update 4.010.13? Hesitant to try and install it again.
You have to unroot it then install the update then root again.
Sent from my SPH-D700 using XDA App
how do you want to unroot if you can't restart?
i hope you have an external sd-card
dl one of the stock 3.1 roms and extract the update.zip (eventually you have to use the un encryption tool available in dev).
put the update.zip on your external sd-card
hit volume- and power simultaneously.
if cwm is installed you will see the cwm menu. if it is not installed it will start with the update.zip and reinstall you system, without root and cwm.
My tab is stock and unrooted but ill try the update again.
Tried to install the update a second time.
Tab restarted then displayed the same "booting recovery kernel image" screen again, but this time only for three or four seconds.
Then went to a screen with the green android guy, a bunch of turning gears, and a progress meter for a little while.
Rebooted and displayed a window "apk process installer" and some text. Looks like it worked this time.
Good to hear it worked out. Not many people have had issues with installing these OTA's while rooted and on stock. I'm sure it was just a fluke. Nevertheless...
After an OTA update on my 2 day old tablet it gets stuck on the splash screen. Everything was stock. Update looked like it installed correctly and everything. I tried flashing the stock package provided on this website but in the top left corner in red letters it says "recovery verified failed"
I extracted the files. put the update.zip in the root of my sd card.
I don't know what version my tablet had on it as i didnt even have it long enough to play with it.
Any ideas before I have to send it back and wait for weeks on a replacement?
Itncould be a defective tablet.
You could try a reset with the reset hole on side next to USB port.might revert it back. Or d/load a full rom put on formatted SD cardnand try to flash holding volume down and power until flash starts
Lots more info about this in dev area.
Goodluck.
I tried the reset button but its still stuck on the screen when it reboots. I tried that flash method with a full Rom and that's when I got the red error message.
Thanks for the quick reply.
tbturner47 said:
After an OTA update on my 2 day old tablet it gets stuck on the splash screen. Everything was stock. Update looked like it installed correctly and everything. I tried flashing the stock package provided on this website but in the top left corner in red letters it says "recovery verified failed"
I extracted the files. put the update.zip in the root of my sd card.
I don't know what version my tablet had on it as i didnt even have it long enough to play with it.
Any ideas before I have to send it back and wait for weeks on a replacement?
Click to expand...
Click to collapse
I got a same problem ...
My a500 gets stuck
I wanted to run a custom ROM on my A500 (first attempt at installing custom ROM), but i'm now stuck at the boot animation.
I downgraded my A500 to 3.0.1, rooted, installed clockwork mod, upgraded cwm to 1.5. So far so good.
Then i downloaded thor rom v12, copied it to the external sd card (by putting it on USB thumb drive, transfer to tablet, copy to external SD using file explorer - something tells me I'm going to need to pick up an sd card reader for my computer)
Rebooted into recovery, wiped everything (had nothing of value installed yet), and then chose to install zip file, chose thor_rom_v12.zip on external SD card, it started installing - looked like it succeeded.
Reboot tablet, and i've been staring at the boot animation (electric blue pulsating android with spinning gears on it) for about 45 minutes.
How should I proceed from here? Any idea what I did wrong?
Thanks
Hold the power button down and see if you can force it to shut down. I dont think itll turn off but its worth a try. You could also try the hard reset button (pin hole on the side of the tab) if the reset works than you should be able to boot back into recovery. If not than youll just have to wait till the battery dies.
Once you eventually get it turned off than try booting into recovery and do a full wipe and reflash the rom. I have a feeling the file you downloaded is corrupted though. if this is so than your tab probally wont boot up again.
At this point id redownload the thor or another rom and than try flashing that. You'd have to get an sd reader since you won't be able to transfer the files through your iconia again. If you can manage to get a clean download on your micro sd somehow than i'd skip straight to this step and start redownloading the rom right now.
BTW these are just the things i would try from knowing what I do about android. I haven't had any issues with my tab yet so I havent looked for solutions for this it, but ive dealt with other boot looped and soft bricked devices.
I'm sure if you do a search you'll find something.
Well. that's the sh#%*t I made:
I tried to revert to stock then I used this package: Acer_A500_7.006.01_COM_GEN2.zip flashing it with vol. - + power button.
The problem is that the screen went on as it was install this update normally with the message "booting recovery kernel image", but, after spinning Android gears, the device is stuck at the green Android robot with the yellow exclamation.
If I try to boot with power button instead, then it's stuck on the boot screen Android logo (the shiny blue one).
I tried to reset and to flash another update.zip, unsuccessful. With the last ROM I had, civato Flexthunder, I had CWM, but now, neither it's menu is showed if I press only vol. - + power button - what I have is "booting recovery kernel image", then the Android exclamation on the screen. Notice that, when I was using that ROM, I had CWM. But I used Acer Recovery Installer to flash the US recovery from it's menu. After that, I installed CWM again with this Acer Recovery Installer...
In the end, I tried what I read here, but I can't solve on my own...
It's so confusing! How can I have my A500 back, please, someone!!!
Need to know how you got back to stock recovery? Did you use Acer Recovery Installer?
If so you should just be able to put a stock 3.01 image on your SD card labeled "update.zip" and recover from there?
kjy2010 said:
Need to know how you got back to stock recovery? Did you use Acer Recovery Installer?
If so you should just be able to put a stock 3.01 image on your SD card labeled "update.zip" and recover from there?
Click to expand...
Click to collapse
Yes, K, I used that Acer Recovery Installer when I was still with civato's ROM.
So, from Acer Recovery menu, I flashed that "US stock recovery" version available there. Following that, I installed CWM from Acer Recovery menu again. So, I put that update cited above and... stuck on that!
mmm... but that update is 3.2 - I didn't try with a 3.01... let me see that...
UPDATE: the links from Vache post for 3.01 full packages are a kind of xml... It's not possible to get the zip files! Is there another available link, please?
I'm not even going to ask why you used Acer Recovery Installer once you had installed a rooted ROM, because I'm afraid of the answer .
I think I might still have a 3.01 at home, but won't be there until Wednesday.
alexrb said:
Yes, K, I used that Acer Recovery Installer when I was still with civato's ROM.
So, from Acer Recovery menu, I flashed that "US stock recovery" version available there. Following that, I installed CWM from Acer Recovery menu again. So, I put that update cited above and... stuck on that!
mmm... but that update is 3.2 - I didn't try with a 3.01... let me see that...
UPDATE: the links from Vache post for 3.01 full packages are a kind of xml... It's not possible to get the zip files! Is there another available link, please?
Click to expand...
Click to collapse
alexrb said:
Well. that's the sh#%*t I made:
I tried to revert to stock then I used this package: Acer_A500_7.006.01_COM_GEN2.zip flashing it with vol. - + power button.
The problem is that the screen went on as it was install this update normally with the message "booting recovery kernel image", but, after spinning Android gears, the device is stuck at the green Android robot with the yellow exclamation.
If I try to boot with power button instead, then it's stuck on the boot screen Android logo (the shiny blue one).
I tried to reset and to flash another update.zip, unsuccessful. With the last ROM I had, civato Flexthunder, I had CWM, but now, neither it's menu is showed if I press only vol. - + power button - what I have is "booting recovery kernel image", then the Android exclamation on the screen. Notice that, when I was using that ROM, I had CWM. But I used Acer Recovery Installer to flash the US recovery from it's menu. After that, I installed CWM again with this Acer Recovery Installer...
In the end, I tried what I read here, but I can't solve on my own...
It's so confusing! How can I have my A500 back, please, someone!!!
Click to expand...
Click to collapse
Had the same issue, then I realized that the update.zip has to be on the EXTERNAL sd card...not internal storage.
Hope this helps.
kjy2010 said:
I'm not even going to ask why you used Acer Recovery Installer once you had installed a rooted ROM, because I'm afraid of the answer .
I think I might still have a 3.01 at home, but won't be there until Wednesday.
Click to expand...
Click to collapse
LOL
I got the point...
So, I've found a 3.01 here. I'm going to try it now...
Nothing
So, I put the 3.01 from here:
http://forum.xda-developers.com/showpost.php?p=15379983&postcount=1
as update.zip in the SD card. Did it with vol - and power button. Again, the Android robot with yellow exclamation.
It's strange... everyone here did it and apparently it worked perfectly, why not in my case?
UPDATE: I changed the update for 2GB SD card. The progress bar went on briefly and so stopped in some point and, again, the Android robot with yellow exclamation.
alexrb said:
So, I put the 3.01 from here:
http://forum.xda-developers.com/showpost.php?p=15379983&postcount=1
as update.zip in the SD card. Did it with vol - and power button. Again, the Android robot with yellow exclamation.
It's strange... everyone here did it and apparently it worked perfectly, why not in my case?
UPDATE: I changed the update for 2GB SD card. The progress bar went on briefly and so stopped in some point and, again, the Android robot with yellow exclamation.
Click to expand...
Click to collapse
Why dont you try the 3.1 Acer_A500_4.010.10_COM_GEN2 from Vache thread
http://forum.xda-developers.com/showthread.php?t=1113878
then run iconiaroot 1.3
The download is good.
bytemehard said:
Why dont you try the 3.1 Acer_A500_4.010.10_COM_GEN2 from Vache thread
http://forum.xda-developers.com/showthread.php?t=1113878
then run iconiaroot 1.3
The download is good.
Click to expand...
Click to collapse
I'll try it now, dude. Thanks.
I tried what I found here:
http://forum.xda-developers.com/showthread.php?t=1176632
and, after the progress bar go until almost the end, it stopped, so do the gears animation, and after reboot, now I have my device stuck on Acer logo screen and the message, in red letters: boot verified failed ...
Ok..
now then you have to ask..
What browser am i using to download this file.. How am i pushing it to the device.. Does the stock recovery like my sd card..
try downloading to using a diffrent browser / diffrent computer.. try pushing it to a diffrent sd card..
there is something in the above post that is consistant.. im guessing its one of the above i mention above that is your issue..
good luck..
erica_renee said:
Ok..
now then you have to ask..
What browser am i using to download this file.. How am i pushing it to the device.. Does the stock recovery like my sd card..
try downloading to using a diffrent browser / diffrent computer.. try pushing it to a diffrent sd card..
there is something in the above post that is consistant.. im guessing its one of the above i mention above that is your issue..
good luck..
Click to expand...
Click to collapse
Chrome.
And I'm pushing the update.zip with "send to..." right click option on the file.
Unbelievable if it's the issue... ?
alexrb said:
I tried what I found here:
http://forum.xda-developers.com/showthread.php?t=1176632
and, after the progress bar go until almost the end, it stopped, so do the gears animation, and after reboot, now I have my device stuck on Acer logo screen and the message, in red letters: boot verified failed ...
Click to expand...
Click to collapse
The update zips are region specific i believe. That one doesnt look like its for your region. It can get confusing.
bytemehard said:
The update zips are region specific i believe. That one doesnt look like its for your region. It can get confusing.
Click to expand...
Click to collapse
You can be right, but since it's not made here, I suppose any update.zip can be used... or not... but in fact I'm not able to know what's the specific file for Brazilian devices... or can I?
man, it's 1+ month tablet! How could I do that? crying out loud...
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
You got your UID Serial number from the USB? It will be 16 digits long.
If so, use a paperclip and power button to put it into fastboot and then flash it.
TD
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
mmmm... I renamed it every time I tried that!
I'll try it again...
timmyDean said:
You got your UID Serial number from the USB? It will be 16 digits long.
If so, use a paperclip and power button to put it into fastboot and then flash it.
TD
Click to expand...
Click to collapse
No, dude... I haven't got it...
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
OOPS YOU ARE Correct . to flash with stock recovery.. only need to extract it to flash with cwm.. But i think its a bad download bad copy or bad sd card issue..
might want to get the md5 sums and check them before on the computer then again on the tablet... after you put the sd card back in the device.. I had this issue with a older 8 gb sd card back when acer first released the tablet..
Again stop trying the exact same thing. change one at a time and you will find your issue.. . AGAIN GOOD LUCK...
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
I did it. Renamed the file to update.zip, but the yellow exclamation came along briefly...
I have had my acer iconia tablet for 2 months.
I am a total noob when it comes to rooting, flashing or installing new roms on any android device. Never done anything like it.
My tablet just boot loops and all i get is "green android icon holding a yellow triangle with an exclamation point".
What can i do. I have seen a youtube video of a user holding down the volume down + power key and he is presented with a menu to factory reset and cache resetting and all that good stuff. I do not get any of that. Any help would be appreciated.
the menu that you seen in the video. was likely CWM RECOVERY. You do not have that menu due to the fact you do not have a custom recovery installed. the android with exclamation leads to believe you have acer recovery. Its limited Only able to flash a ACER Signed update.zip only .
Reply back with exactly what you did with details about rom version and so on . So someone can better help you. To get the right help we need to know how you broke it..
At this point Do not do anything until you know you are doing the correct fix for your situation.. You are NOT Bricked.. you just have a bad UPDATE.ZIP FILE OR Bad format on your sd card..
Help is close by..
To be honest i really do not know what rom version was used. Like i mentioned before. I myself have never rooted or altered an android device.
From where you are right now in a boot look .. where do you want to end up.. ROOTED ... STOCK TO WHERE YOU can accept the acer OTA. when they push them..
sounds like you may be able to reset the tablet withe hole next to the usb port.. You have to push quite hard to get it to push the Button..
Im guessing due to the lack of information you are providing.. Sorry..
Thanks for your help. The darn thing is still doing the same thing. Guess i got to do a little more research.
If you're asking for help you need to describe what actions exactly you have taken in order to reach this state (as Erica suggested) of your tab. From your post 1 thing is clear - your tab is unable to boot, but what has been modified before remains a mystery.
joester818 said:
I have had my acer iconia tablet for 2 months.
I am a total noob when it comes to rooting, flashing or installing new roms on any android device. Never done anything like it.
My tablet just boot loops and all i get is "green android icon holding a yellow triangle with an exclamation point".
What can i do. I have seen a youtube video of a user holding down the volume down + power key and he is presented with a menu to factory reset and cache resetting and all that good stuff. I do not get any of that. Any help would be appreciated.
Click to expand...
Click to collapse
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Just to complement Moscow Desire's advise: It's Vol (-).
drkalo said:
Just to complement Moscow Desire's advise: It's Vol (-).
Click to expand...
Click to collapse
Thanks! I can never remember which one, as I've never had to use it
Edited the instructions.
Moscow Desire said:
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Click to expand...
Click to collapse
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
joester818 said:
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
Click to expand...
Click to collapse
Be patient. Try later. Vach's server is probably overloaded due to the leaked ICS Rom.
You only need to get 1 of the A500 update roms. It's actually a fully signed rom in the file "update.zip" Just decrypt rom you the original rom you downloaded using the instructions, use winzip or 7zip to open the decrypted rom, remove the update.zip and copy it to your sd card.
And Then?
joester818 said:
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
Click to expand...
Click to collapse
Hi,
did u succeed?
Rgds,
trying to recover A500 - boot recovery failed
Hi - I'm trying to reset and recover my son's A500 tablet. I copied one of the HC 3.2 Update.zip files to a microSD card, then held down Power and Volume - buttons. As long as I hold down the Volumn down buttin, the tablet seems to be stuck in a never ending cycle of loading the update and booting recovery image kernal, then restarting, then loading the update.zip file and booting recover image kernal, etc.... If I let go of the Volume Down button, I get in red letters "Boot Verification Failed" message, and it stops.
im trying to help fix an a500 tablet. apparently the tablet gets stuck at the acer logo. when i hit power and the volume button i get some lettering in the top letft. I took the advice here and went and downloaded one of the HC 3.2 updates. copied the update.zip onto the root of the Sd card and then put it back in. I hit the same buttons again and the letters came up. so i assumed things were working. all of a sudden i get an android with a blue diagram in its belly (kind of like it was loading) and then it froze. after waiting for a second I got a second android that popped on the screen and this one is laying on its back with its chest open and a red triangle is showing....So I don't know exactly what I did wrong here. Any help would be appreciated. I am not exactly sure what he did to mess it up. I believe he was trying to install a custom rom and did not go about it correctly and therefore messed up an update and now he has nothing. so im not sure what to do exactly.
Moscow Desire said:
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Click to expand...
Click to collapse
I to have had the same problem with my Acer Iconia A500. I followed the instruction and booted the Acer...got to the screen with the Android robot standing upright with the spinning in his stomach...goes to about 1/4 of the way and doesn't go any further....looks like it's trying to continue but has been at the same place for over an hour. Do I need a different rom perhaps?? I used A501.000.00_4.037.01.emea_tmp
mizzle54 said:
I to have had the same problem with my Acer Iconia A500. I followed the instruction and booted the Acer...got to the screen with the Android robot standing upright with the spinning in his stomach...goes to about 1/4 of the way and doesn't go any further....looks like it's trying to continue but has been at the same place for over an hour. Do I need a different rom perhaps?? I used A501.000.00_4.037.01.emea_tmp
Click to expand...
Click to collapse
Well, you can try this. Below are links to update.zip files already decrypted on my server. I have renamed them, only so you can keep them separate. You will have to change the name to "update" (update.zip) and copy one to ext sd card. Reboot holding Vol (+ or -) and PWR. See if they install. You may have to try each until one installs as there is no way to predict which one will work.
http://d-h.st/KXl
http://d-h.st/gw8
http://d-h.st/2cm
http://d-h.st/Zf8
This is probably the easiest method to try first.
MD
the "41-125-03-update.zip" seem to work for me. The status bar finally is showing but it doesn't seem to be moving. It moved to 1/4 of the bar and it stayed there. Last time it did this, it stayed there for over 2 hrs. I hope it's working this time. Anything else I could try?
My tablet was working fine and I left it there to go to work, coming back I found it on the Acer logo. Many search brought me here.
update ========
tried and tried and tried.......a few times that the status bar did come up, many times it stuck at around 25%. A few times it got all the way to 75% of the bar. It refuse to go farther when I left it there all night. It finally died when the battery was complete drain.
Acer A500 Stuck on ACER Logo (not rooted) finally fixed!
Just wanted to post some positive things for a change. My ACER A500 tablet (not rooted and running ICS 4.0.3) was working fine two months ago and I wanted to watch an ESPN3 football game on the tablet which I then hooked to my HD TV via the HDMI cable. For about an hour, all was fine then the tablet did an uncommanded reboot and then I had the android figure with an opened belly followed by an android laying on it's side with an exclamation mark. On the next restart, my tablet would not pass the ACER logo screen. After reading many posts with the stuck ACER logo, I was not sure how to proceed exactly. I have rooted a 7 inch tablet last year but I could not get my act together on the exact steps to revive my tablet. Finally I came across this post with the ACER ROMs already decripted which removed many questions I had about the exact steps to create an "update.zip" file for my SD card. Based on just downloading the file from your web site and renaming the file to "update.zip" and moving a copy to a formatted SD card, I was ready to try the process to load another ACER file to my tablet. On my first attempt, I tried the file named "206-03" based on a guess of the naming convention used or maybe blind luck. I preformed the PWR button and Vol down button combination with the "update.zip" file on the micro SD inserted in my tablet. The tablet started with three lines of text and then the android figure with it's door open and activity inside the android. This screen stayed then with a completion bar followed by a large text screen warning not to turn off tablet. After about 15 minutes total, my tablet was alive with a request to select my country. Bottom line, taking the steps to put the decripted file on your server and the simple button combination to start the reload process allowed me to get my tablet working great running ICS 4.0.3. I just wanted to post a success story and follow up. Thank you Moscow Desire for taking the extra steps to help the uneducated user!
Anyway I can check if my ROM hardware are working properly? I have tried all the update.zip and all of them show a dead android at the end. I can't even tell if it read from the microSD.