Network type/icon - Networking

Hello,
I'm using now for the first time an android phone (cm7 on optimums 2x).
I was used (coming from NOKIA) to know if i was on a GSM or UMTS network + if the data protocol available was GPRS or EDGE on GSM and 3g or hsdpa (3.5g) on UMTS.
I had to disable mobile data right away on the android phone because i pay for that, but now I don't see any icon. Isn't there a way to have to same behavior of nokia DISABLING access with mobile network or at least on demand if I ever wanted to use it in some occasions?

No E, G, 4g icon means no data. Only way to use it would be to pay for it or use wifi
To turn network data on go to settings>wireless & networks> mobile networks
Hope this helps.
Sent from my LG-P999

Related

At home, GPRS vs. Wi-Fi

Everyone,
Apologies, and I know this is a stupid question, but when at home with my htc tound pro, with WiFi on, and connected, why do I need the phone on too for the WiFi to work,...?
Also, when both are on and working, which system is used, i.e., the SIM card connection or the WiFi connection,...?
WiFi I pay a flat monthly rate for unlimited data, with the SIM card I am on a fixed amount of data transfer per month,...
Thanks for listening,
ek
Well..
You may be using an application that is not Wifi aware. So, it demands a GPRS/EDGE/3G connection. So - in effect - it's not actually using the Wifi connection.
If you can use the application with Wifi on, and phone off - it's Wifi aware. (Meaning it can utilize Wifi).
If you can't use the application without the phone being on - it's not Wifi aware or has not been configured to use the Wifi.
What application are you having issues with?
thanks for getting back to me,... WM Professional 6.1 and the Internet Explorer program when going on to the web,... i'm just wondering which systems does the phone use when both are functioning,... am i using the gprs from my SIM card or am I using the wi-fi in my home,...? and why do i need the phone turned on to use the wi-fi in my home,...?
thanks again,...
ek
you can see if it's using gprs on the icon for signal str if it's showing animations
it's using gprs
otherwise it's using wifi
if you set
settings-connections-connection-advanced-select network to my homenetwork
it dont use gprs
did you set the gprs settings to your gsm provider?
i would prefer wifi over gprs/3g anyday unless if your home internet is extremely slow ( <300kbps). the battery life would be almost equal so why not a faster connection?
Rudegar said:
you can see if it's using gprs on the icon for signal str if it's showing animations
it's using gprs
otherwise it's using wifi
if you set
settings-connections-connection-advanced-select network to my homenetwork
it dont use gprs
Click to expand...
Click to collapse
I'd like to understand how WM decides which network to use when it has a choice e.g. HSDPA and WiFi. I've looked at the settings mentioned above and I currently have Internet using Contract Internet (HSDPA) and Work using WiFi as the WiFi networks I connect to are firewalled and privately addressed.
What settings should I have to ensure that when I have the choice of WiFi and HSDPA (at home) I use WiFi, and when out and about I use HSDPA?
Everytime an application wants to connect to the net:
- If wifi is connected and GSM isn't, it uses Wifi
- If wifi isn't connected, it tries connecting to GSM and will use that.
- If both are connected - we don't really know what happens.
When you're at home, check that GSM is not connected (no little E, G, 3G or H on the signal bar icon, disconnect it if connected), turn on wifi, wait until the arrows have stopped moving on the Wifi icons, and now you can launch the program that wants to connect to the net, and it will use wifi.
If at this point you get a popup about the phone connecting to GSM data again, then there's a connectivity problem on your Wifi and the device can't reach the net through it.
You might want to install Modaco Nodata, it allows you do disable automatic connection to GSM so that you can be sure it doesn't connect when you don't want it to.
mine never use gprs when it have wifi
I have a Touch HD and I can make things work fine by manually turning off the data connection then turning on WiFi in the comm manager when I'm at home or vice versa when I'm out and about.
I would have thought win mobile 6.1 would have been a mature enough OS to allow this to be configured automatically. This and Opera are my only outstanding issues with the HD.
Strange. I can easily shut my phone off, enable wifi & browse fine.

automatic turn off GPRS/EDGE at GSM network change?

Hi,
I have a short Question. Is it possibly to turn off the data connection, when the phone switches the GSM/GPRS network? I live here very close to Switzerland. But when it switches to a Swiss GSM I should be available, but the data connection should close.
I know that there is the programm "No GPRS" but AFAIK it doesn't turn off the data connection automatic. (The I-Phone has such a function integrated as example)
dmc5 said:
Hi,
I have a short Question. Is it possibly to turn off the data connection, when the phone switches the GSM/GPRS network? I live here very close to Switzerland. But when it switches to a Swiss GSM I should be available, but the data connection should close.
I know that there is the programm "No GPRS" but AFAIK it doesn't turn off the data connection automatic. (The I-Phone has such a function integrated as example)
Click to expand...
Click to collapse
take a look here http://forum.xda-developers.com/showthread.php?p=3619565
this will disable data under roaming automatically and re-enable it under home network

Wifi Over GPRS

Hi Guys,
I am having Wifi in my home with unlimited download plan. In my wildfire, the GPRS plan is restricted to download.
So, i like to use only Wifi when i reach home. I do not want to use GPRS even when the Wifi signal is weak... How to switch on GPRS on/off??
Can somebody guide me to do this...
Thanks for your help
If I got you properly, isnt it working by going to Settings > Wireless and Networks > Mobile Networks > Uncheck Data Enabled ?
Alternatively, a Power Control Widget for Mobile Data also works perfectly fine.
Or search in the market for the app Y5. I think it does exactly what you want. It will remind the wifi networks you connect to and use the wifi network if you are
in range. When you are out of range it will use gprs / UMTS.
Sent from my HTC Wildfire using XDA App
hold down the power button and it brings up a menu from were you can turn gprs data off.
an app called widgetzoid can be used so you can turn on/off mobile data easily.
there is both a free and paid version of this app on market
both will do the job just fine

Unable to connect to 3G - Rogers

So I have my APN settings configured correctly as per http://forum.xda-developers.com/showthread.php?t=1187611 however I can't get off Edge for some reason. When I go into networks and select either manual or automatic, it only seems to find the 2G or Edge network.
Any idea how to change this so I can get back onto 3g?
Go to settings, wireless & networks, mobile networks, networks mode and choose wcdma only.
Sent from my X10i using XDA App

Tethering - not with 4G enabled

Sorry if this has been raised before but if my phone mobile connection is set to include LTE (4G), it won't allow me to tether (my laptop) and use it as a mobile hotspot. I have to turn off 4G and it then connects. Is this normal or a fault?
UK Based on Vodafone.
ty
fixed by selecting a different operator then selecting Vodafone again! weird

Categories

Resources