I'm running 2.2 Fission because Wireless Tether for Root Users still works (at least version 2.08-pre1 ***EXPERIMENTAL*** still does). I tried the GB leaks and various roms before coming back to 2.2 Fission because tether didn't work. Has anyone updated to 2.3 and had their tether work after rooting again?
Solution: The only thing I've found working is using the CM7 Rom and Barnacle.
I use ver. 2.0.5-pre14.apk and it works fine.
You've taken the official update that dropped yesterday and rooted? Not on a previous leak right?
Sent from my DROID2 using XDA App
I updated my Droid2 with yesterdays official verizon update Gingerbread 2.3.3 and wish I hadn't.
Wireless Tether now says Unable to start tethering. Is your device 'rooted'?
Still looking for some clarification on this as well. I know the new update can be rooted but my girlfriend currently uses EasyTether and I know that will be broken with the official, stock unrooted update. I'd like to see if there's a wired or wifi tether that is known to work on stock rooted software. I believe newer versions of Wifi Tether were tweaked to work on the Droid X with similar restrictions?
Try using ver 3.0
Sent from my DROID2 using XDA App
Verizon 3.0 works on official gingerbread?
Sent from my DROID2 using XDA App
Are you using the official tether or a rooted free one? I use barnacle wifi tether and it's worked on every ROM I've used. Just confirmed it works on the OTA GB with CM7 from the latest nightly.
Dumb Question
Sorry if this is such a newb question.
My DROID2 is rooted, but this morning I updated with the official Verizon Gingerbread update. Now my Wireless Tether doesn't work with my Ipad anymore.
Do I need to re-root and then download a new wireless tether?
Thanks,
lbhi2005 said:
Sorry if this is such a newb question.
My DROID2 is rooted, but this morning I updated with the official Verizon Gingerbread update. Now my Wireless Tether doesn't work with my Ipad anymore.
Do I need to re-root and then download a new wireless tether?
Thanks,
Click to expand...
Click to collapse
Yes, you need to re-root. The below post has instructions and the file, it's a one click root for Droid 3 but it works on our phone. I just used it today.
http://rootzwiki.com/showthread.php...ndows-Linux-OSX)&p=75934&viewfull=1#post75934
Which tethers working for you? Barnacle is no longer working properly on my Droid 2, and others get directed to the Verizon site.
nylyon said:
Which tethers working for you? Barnacle is no longer working properly on my Droid 2, and others get directed to the Verizon site.
Click to expand...
Click to collapse
Can you be specific? What is not working about barnacle? Sometimes I have had to enable then disable wifi before using it because there can be an error where the wifi manager interferes. I just booted it up and it's working.
idefiler6 said:
lbhi2005 said:
Sorry if this is such a newb question.
My DROID2 is rooted, but this morning I updated with the official Verizon Gingerbread update. Now my Wireless Tether doesn't work with my Ipad anymore.
Do I need to re-root and then download a new wireless tether?
Thanks,
Click to expand...
Click to collapse
Yes, you need to re-root. The below post has instructions and the file, it's a one click root for Droid 3 but it works on our phone. I just used it today.
Click to expand...
Click to collapse
I read thru the solution you linked to and it seems to be for Droid 3 with Windows.
Is there a solution for just plain old Droid 2 (not global) and using a 2011 Macbook?
Doesn't seem the question has been answered definitively, and the thread is derailing into a how to obtain root. Yes, I'm refering to tethering like with wireless tether for root users, not mobile hotspot addon to your plan. I couldn't get tethering to work with the leaked, rooted versions of GB, as they seemed to have patched unauthorized tethering on those versions. I'm wondering if this is still true on the ota, or official, GB.
Sent from my DROID2 using XDA App
The droid 3 one click root works for almost any motorola phone, including the unreleased bionic.
As for the platform, can't help you with a mac =(. Next time you're better off with a PC of some kind. Cheaper too.
Deciding to just throw caution into the wind, I Titanium Backup'd my apps, made a backup through Clockwork Mod, then wiped data and cache, then rebooted into stock recovery, wiped data and cache there, then rebooted holding the up button on the keyboard to get the bootloader, then SBF'd, then OTA'd the GB, then rooted using
http://www.psouza4.com/droid3/#root
Then installed
wireless_tether_2_0_7.apk
from this site
http://code.google.com/p/android-wifi-tether/downloads/list
and got it to connect and transmit data, but got the verizon redirect everytime.
So I rebooted the phone, and bam it worked. Didn't change any frequency channel, just a reboot. It may be noted that my laptop couldn't connect to AndroidTether, but as soon as I changed the SSID to what I had it on my 2.2 Froyo Rom, it hooked up right away. However I wasn't able to recreate this success and after several hours of beating my head against the wall, I gave up and just went back to Fission 2.2 and stopped. Couple days later I SBF'd, retook the OTA, flashed CM7 and Barnacle seems to work.
Try barnacle tether, it's free and on the market (for those getting redirected)
EDIT: Confirmed with my laptop just now. Barnacle works great, does not redirect to any site at all.
I would try CM7, especially if you just got the OTA update. It's been getting rave reviews and is amazing on battery life. Droidforums has all the info.
idefiler6 said:
Try barnacle tether, it's free and on the market (for those getting redirected)
EDIT: Confirmed with my laptop just now. Barnacle works great, does not redirect to any site at all.
I would try CM7, especially if you just got the OTA update. It's been getting rave reviews and is amazing on battery life. Droidforums has all the info.
Click to expand...
Click to collapse
You've updated with the OTA, rooted and are using Barnacle? Or are you on CM7?
Sent from my DROID2 using XDA App
I updated to OTA and am using CM7GB 9/2 nightly. Rooted and using Barnacle.
idefiler6 said:
I updated to OTA and am using CM7GB 9/2 nightly. Rooted and using Barnacle.
Click to expand...
Click to collapse
I thought I read somewhere you had to be on Froyo to flash CM7, right?
Sent from my DROID2 using XDA App
Related
i purchased the phone with 2.1, didnt root it... did the OTA udate to froyo 2.2.... on august 27th i read that the root for OTA stock froyo was created on the 26th... performed the root for 2.2 successfully... however... none of the versions of the WiFi tether app for root users are working... once i start tethering, no devices can pick up the signal n if it does i get a messege on my laptop saying that there is no internet access... please help... if its a quick fix please PM me cause im always busy n i barely check the forum.... thank you in advance
Because it doesn't work, sprint did something special for it not to work, I forget what it is
you try this one?
I had the same issue. I typed out the fix on another thread. Basically you have to use the ruu to go back to 2.1 then find the rooted 2.2 stock img with recovery and apply that from the updated 2.2 root guide. This will fix your problems and work in any of the roms
afterward.
Sent from my PC36100 using XDA App
_s^sOul_ said:
I had the same issue. I typed out the fix on another thread. Basically you have to use the ruu to go back to 2.1 then find the rooted 2.2 stock img with recovery and apply that from the updated 2.2 root guide. This will fix your problems and work in any of the roms
afterward.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No no no, don't do this.
Try different version of the wifi tether here
http://code.google.com/p/android-wifi-tether/downloads/list?can=2&q=Evo
ms79723 said:
you try this one?
Click to expand...
Click to collapse
Thank you so much!
Thanks!!
This one is working very good. I am using right now.
tether evo 4G fixed after using wireless_tether_2_0_5-pre8.apk
Hello
Just want to say thanks to all the people joined to this community giving their knowlegde to make wiress network problem easy to solve.
I have evo 4g rooted 2.2 i follow all the steps in here this website, without getting wifi tethering mAKE IT WORK.
Problems:
Can connect devices with no data transmition due to dhcp does not sent ip settings to devices.
Trying all setting available in apps( barnacle or wifi tether etc)
SOLUTION
installing from google code website
Wireless_tether_2_0_5-pre8.apk
Good luck for you...
I am so happy being able to share 3g and 4g in downtown la area
Alright guys, a few more rookie questions from this kid and I'll stop bothering the piss out of you
First off, I've recently rooted, and I have a few questions. I'm running a stock rom, and I rooted using the one click root but other than that, I haven't done anything major to my phone because I'm sort of lost in the process on a few things.
So, number one, I keep reading about the new update, I think it was DI18 or something to that effect? What I'm curious to know is, am I going to get these updates OTA with root, and, if so, will it remove root or am I fine as long as I have a stock rom? I just need to know if I need to avoid updating the phone OTA or not worry about it.
Also, I wanted to know how to get a netfiltered enabled kernel. i've been trying to use Wireless-Tether and I don't get any errors, just no UL or DL numbers and it doesn't do anything to my computer.
I posted a few threads ago that I am completely new to Android and such and have been running WinMo for the last 4 or 5 years. I'm trying to get used to all of this and after running with my HTC Raphael for the last year and a half I'm finally upgrading and this is a whole new world.
Any and all help would be greatly appreciated, and thanks to everyone in the community! I really appreciate all of it. Oh, and for the record, I've looked around for a few hours on the net trying to figure out these things but I can't seem to find any answers. It seems like all of this is common knowledge for everyone else, but I've been running with Android for less than 2 weeks now. Thanks all.
Dig Life!
D
I seem to be having the same problem you are with wireless tethering. So if you figure out a fix please let me know.
We don't need a special kernel for wireless tether. Wirelss tether for android pre15 works fine for me. Ota updates will remove root, but so far it seems our same root method is fine with 2.2.1 updates (dk28) .
Sent from my SPH-D700 using XDA App
Kcarpenter said:
We don't need a special kernel for wireless tether. Wirelss tether for android pre15 works fine for me. Ota updates will remove root, but so far it seems our same root method is fine with 2.2.1 updates (dk28) .
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Isn't it true though that some custom kernels don't support tethering? For example, I run Andromeda DI18 and when I try to tether it says its not supported by my kernel.
Well, not sure. The only ones I have run are mix up and fluff. Both worked for me.
Sent from my SPH-D700 using XDA App
Just wanted to see if anyone's had any issues installing and running the android tether apk after they upgraded to 2.2 on their Bravo?
Thanks!
Any ideas on what works to root froyo 2.2.1? I still can't get SuperOne Click o work?
photobuddha said:
Any ideas on what works to root froyo 2.2.1? I still can't get SuperOne Click o work?
Click to expand...
Click to collapse
use psneuter not ratc. it works. i tested it.
I've tried it, and have yet to succeed in getting it to work.... I've not tried a lot though. Maybe they attempted to block it? Cause if you use the built in USB tethering, it'll check your account before letting you tether. And I wouldn't be surprised if the 3G Mobile Hot Spot checked your account or reported your tethering to AT&T.
Yes the native hot spot app will require you to be on the 45$ 4 gig data pro plus mobile hotspot tethering plan. So anyone sill grandfathered in the unlimited 30$ data plan will loose it if they switch. that's att for ya lol
I am successfully using Wireless Tether version 2.0.5-RC2 to make this post after upgrading to Android 2.2.1 and re-rooting my bravo. Hope this is helpful in some way.
alamardaman said:
I am successfully using Wireless Tether version 2.0.5-RC2 to make this post after upgrading to Android 2.2.1 and re-rooting my bravo. Hope this is helpful in some way.
Click to expand...
Click to collapse
Cool - thanks for the update alamardaman.
I just did the same today and yup verified it worked! I used superoneclick to enable rooting.
Anyone tried android-wired-tether?
Ok. My buddy at work has a hero running 2.1
I rooted his phone using the z4 root, installed recovery using rom manager.
main reason for wanting to root was to be able to use wireless tether, so I installed it but can't get it to work at all.
app starts fine but when you hit the button to start tethering it says its starting but it won't send or receive any info, and I can't detect it sending out any kind of wireless signal.
Thought busybox might be the issue so I installed the newest version from the market. 1.18.somethingsomething.
Didn't work, still nothing.
googled the issue I'm having and can't find a fix. I'm using the newest version from the market, even tried a old version 1.61 I believe.
I'm out of ideas. Can anyone help?
Sent from chuck norris using xda app.
drew454u said:
Ok. My buddy at work has a hero running 2.1
I rooted his phone using the z4 root, installed recovery using rom manager.
main reason for wanting to root was to be able to use wireless tether, so I installed it but can't get it to work at all.
app starts fine but when you hit the button to start tethering it says its starting but it won't send or receive any info, and I can't detect it sending out any kind of wireless signal.
Thought busybox might be the issue so I installed the newest version from the market. 1.18.somethingsomething.
Didn't work, still nothing.
googled the issue I'm having and can't find a fix. I'm using the newest version from the market, even tried a old version 1.61 I believe.
I'm out of ideas. Can anyone help?
Sent from chuck norris using xda app.
Click to expand...
Click to collapse
I'm using the one from the second post of the following thread, and it works perfect tethering to my Nook.
http://forum.xda-developers.com/showthread.php?t=999694
Just occurred to me......the Hero only broadcasts Ad Hoc not Infrastructure if my recollection is correct. That could be your problem too.
Sent from my HERO200 using XDA App
drew454u said:
Ok. My buddy at work has a hero running 2.1
I rooted his phone using the z4 root, installed recovery using rom manager.
main reason for wanting to root was to be able to use wireless tether, so I installed it but can't get it to work at all.
app starts fine but when you hit the button to start tethering it says its starting but it won't send or receive any info, and I can't detect it sending out any kind of wireless signal.
Thought busybox might be the issue so I installed the newest version from the market. 1.18.somethingsomething.
Didn't work, still nothing.
googled the issue I'm having and can't find a fix. I'm using the newest version from the market, even tried a old version 1.61 I believe.
I'm out of ideas. Can anyone help?
Sent from chuck norris using xda app.
Click to expand...
Click to collapse
when you started the app did you get a window asking for superuser permissions? if not then you are not rooted. I know that some of the carriers recently pushed an OTA update that blocked z4root's rooting method.
hockeyfamily737 said:
I'm using the one from the second post of the following thread, and it works perfect tethering to my Nook.
http://forum.xda-developers.com/showthread.php?t=999694
Click to expand...
Click to collapse
awesome i will try that one tomorrow. thanks.
hockeyfamily737 said:
Just occurred to me......the Hero only broadcasts Ad Hoc not Infrastructure if my recollection is correct. That could be your problem too.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
im not gonna lie i have no idea what that means....... but i know other people with heroes are tethering.
ngholson said:
when you started the app did you get a window asking for superuser permissions? if not then you are not rooted. I know that some of the carriers recently pushed an OTA update that blocked z4root's rooting method.
Click to expand...
Click to collapse
yes, thanks for asking, i should have stated that in my original post. I apologize. currently i have adfree, root explorer, and titanium all running with no issues on his hero.
if your on a sense 2.1 rom you need to use wireless tether v1.6 from google code this is due to the kernal in sense 2.1 roms if your on 2.2 or above v2.7 should work on almost all computer os's except ubuntu 11.0.4 due to a kernal issue. but usb tether works fine on ubuntu. also u can try wireless tether pre 3.0.14 from google code witch will work on almost all roms except for kifno sense roms and liquid sense roms. just please make sure if your on a 2.1 sense rom be sure to go to settings settup mode and select hero cdma then go down to lan settings and enable routing fix for hero.
if your wanting to connect to a ps3 i have a guide buried somewere in general that tells you how to set up a brdge
Stupid question, but do you have your 3g on?
-----
Sent from my CDMA Hero. I got some hot Ginger-on-Hero action here!
user7618 said:
Stupid question, but do you have your 3g on?
-----
Sent from my CDMA Hero. I got some hot Ginger-on-Hero action here!
Click to expand...
Click to collapse
LOL....The Ad Hoc connection should still be present, just can't connect to the internet. I know this because I am a dope and always start my tether without starting my 3g and realize what I did when I can't open up a webpage. It's more then likely what Bierce was saying with the different Wireless Tether versions between 2.1 & 2.2 or a setting / script on the receiving device. With my Nook running CM7, by default it can connect to Ad Hoc, but running Honey Comb I have to change out the wifi supplicant to switch from infrastructure to Ad Hoc, and with my old iPaq I had to go into wireless / settings and enable Ad Hoc in the list of supported network types.
I purchased my DROID x around january 2011. First thing I did was install z4 root (not sure which version) and superuser. Also installed wireless tether from the market. Everything worked fine until the update was available. I went to my settings and updated without unrooting or changing anything. As soon as it was done updating I was no longer rooted. When I open z4 is says temp root, perm root and unroot. When I try to use tether it asks if my phone is rooted. When I try to hit perm or temp root z4 closes and I have to turn phone off and back on to even get it to open. I really want my tether back and I have no clue what to do.if I need to return phone completely stock please give instructions on that as well. Thanks
Z4root will not root the phone after the update to Gingerbread is taken; also, wireless tethering does not work on Gingerbread.
If you just want root, I recommend searching for 'PetesMotorolaPhoneTools', and using that to root your phone.
If you want to be able to tether then I recommend SBFing back to 2.3.34 and flashing either MIUI or a version of CM7 that uses the froyo kernel.
Sent from my DROIDX using XDA App
I really don't know what im doing so what is the easiest way to get back to froyo
i can help to show you a easy way like using 4zroot let me know ill send it to you
Sure send it. I wanna get back to froyo soon. [email protected] if you need email
Just to be clear...Pete's Tools will root DroidX running build 4.5.1_57 _DXS-32 System version 4.5.602?
skeeterpro said:
Just to be clear...Pete's Tools will root DroidX running build 4.5.1_57 _DXS-32 System version 4.5.602?
Click to expand...
Click to collapse
Yes it will.
Sent from my DROIDX using XDA App
But the only reason I want to root is to tether. So is there any tethers that will work with petes tools
smithsuede said:
But the only reason I want to root is to tether. So is there any tethers that will work with petes tools
Click to expand...
Click to collapse
Tethering using apps such as Wireless Tether is blocked on Gingerbread; however, there is a patch for the 3G Mobile Hotspot, I believe that when you use it Verizon can track you though.
Sent from my DROIDX using XDA App
SBF with the newest .605 SBF, then root with the D3 1 click root method. Done. Fast & simple, Then only 1 update!
http://droidmodderx.com/wugfresh-tether-patch-free-wifi-tether-on-gb-kernel/
Works great. Follow directions
sent from my sense on crack MT4G Slide using xda premium