Hello guys I was having a slight problem here. I recently got a mytouch 3g from a friend. The phone at the moment is flashed with Cyanogen's Android 2.2 froyo. I wanted to upgrade it to Ginger Yoshi's 2.3 rom. I'm a n00b in this stuff but I checked guides on the internet. But whenever I attempt to go into recovery mode, the phone stucks on the boot "green" screen. And nothing happens. Home + Power button does not lead to recovery mode, and just gets stuck on the green screen. I assume my phone is rooted because I entered "SU" in a Terminal Emulator and it started off fine. I'd be grateful if I could be helped here as I want to move to 2.3 asap. Apologies for the n00bish attitude but I know nothing much of flashing as of yet.
Here are a few notes:
Sapphire PVT 32B ENG S-OFF H
HBOOT- 1.22.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.261
I'd be grateful for some help and please do explain detail as I'm a mega n00b
Asjad said:
Hello guys I was having a slight problem here. I recently got a mytouch 3g from a friend. The phone at the moment is flashed with Cyanogen's Android 2.2 froyo. I wanted to upgrade it to Ginger Yoshi's 2.3 rom. I'm a n00b in this stuff but I checked guides on the internet. But whenever I attempt to go into recovery mode, the phone stucks on the boot "green" screen. And nothing happens. Home + Power button does not lead to recovery mode, and just gets stuck on the green screen. I assume my phone is rooted because I entered "SU" in a Terminal Emulator and it started off fine. I'd be grateful if I could be helped here as I want to move to 2.3 asap. Apologies for the n00bish attitude but I know nothing much of flashing as of yet.
Here are a few notes:
Sapphire PVT 32B ENG S-OFF H
HBOOT- 1.22.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.261
I'd be grateful for some help and please do explain detail as I'm a mega n00b
Click to expand...
Click to collapse
If recovery doesn't work then flash it again in fastboot.
Ginger yoshi requires a newer radio and spl. You could flash a kernel to get it to work or upgrade to the new radio and spl. Search is your friend
Well thanks . Since I mentioned that I mega n00b, can you give me a guide over how to reflash? and install a new radio and of course flash a kernel?
http://forum.xda-developers.com/showthread.php?t=831139
Thanks now there's one problem. I have downloaded Android SDK/ADB. Whenever I connect in Debugging mode, ADB device is detected with the serial number however when I go into bootloader for fastboot. It's not detecting it on my pc. Hence I can't seem to fastboot. P.S: The bootloader does say "Fastboot USB" but it's not working. :/
What OS are you using? Linux, Mac OS, or Windows?
Related
I did something bad to my magic (ION). I was tying to get a non perfect spl so i applied a rom that gave me a htc build. Fine . Then I was trying to get back to a stock ion build using the guide on developer.htc.com. I applied the radio update as read, and once I did, when I tried to reboot, all i got was the htc magic boot screen. I cannot get into fastboot, nor recovery mode. My ion was not rooted and had the normal recovery. The last time I went into fastboot it said this:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010
CPLD-10
Radio 3(2?).22.20.17
I got the that rom from http://forum.xda-developers.com/showthread.php?t=548218
The radio I tried to apply was 2.22.19.26I. Maybe something was wrong with the .zip that I created with adb?
Please help me. Is there anything I can do? I am not a developer or a leet hacker. I just wanted to get cyanogenmod but took a few missteps along the way.
So I have bought a HTC Magic in Singapore about a year ago.
Some of the information about my phone before it got stucked in HTC Magic power-on screen:
SAPPHIRE PVT 32A SHIP S-ON A
HBOOT-1.33.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009,19:43:30
I found a site that helped me to get my phone rooted as follow:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009,18:19:15
Soon after, I started searching for new ROM elsewhere and managed to update my SPL to 1.33.2007 and that's where problem starts to occur..
My phone get stucked on HTC Magic screen display forever.
I was eager to get this problem solved and have not done enough research before I got myself in a worse situation with the phone hbooted like this:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-12
RADIO-2.22.19.26I
May 27 2009,19:06:41
Now I can only enter hboot and fastboot.
Can somebody help me to at least get back to my original ROM? I don't wanna root my phone ever again..
Help please~
If you can get into fastboot you're fine. Just flash 32A radio/spl again and then the desired ROM. Old radio/spl - 1.33.X/3.22.X New radio/spl 1.76.X/6.35.
yeah when turning on the phone hold home and power, if you get the recovery menu then you got nothing to worry about, just flash the proper rom and all will be fine, there is even a stock htc rom with root around here.
right here http://forum.xda-developers.com/showthread.php?t=622038
but you dont have to go back to stock, you just need to put on a rom that fits your phone. i personally suggest this http://forum.xda-developers.com/showthread.php?t=654284
so good luck post back when you get it figured out
Thank you Reziukas and sike89 for the reply..
I will try the ROM recommended in the links. =)
I cannot get into recovery (-Home- & -Power-) now due to the perfected SPL (1.33.0006).
And whenever I use the goldcard method that flooded over the internet, I always get this "Main version is older!" failure message.
I think I have made the goldcard correctly cause it worked while I was trying to flash my 1.76.0007 SPL to 1.76.2007.
Any idea?
when you hold home and power what does it do?
did you root your phone with the recovery-RA-hero-v1.6.2.img?
I did but after I flashed RADIO-2.22.19.26I with SPL 1.33.0006 I can't get into this recovery mode anymore.
When I press Home and Power, it starts booting but stucked on HTC Magic screen forever..
Easily said it, I can only enter hboot (vol down and power) and fastboot (back and power) now..
Procedure
1.Turn your phone off. Turn it on by holding Back and Power, or Vol. down and Power. Either way, boot into the bootloader.
You should see the three Androids on skateboards, and the menu title should say "Fastboot".
2.Connect your device to the computer. The display on your phone should now say "Fastboot USB".
3.Open up the shell/terminal on your computer, and type
fastboot devices [enter]Your device should be listed with it's serial number, and should say "fastboot".
4.Change directory to where you have saved your recovery image. I.e. type "cd /path/to/recovery.img in windows prompt, press enter.
5.You may issue a "dir" command (Windows) or "ls" (Unix/Linux) to make sure you are at the right directory, or just skip this step.
6.Type
fastboot flash recovery recovery.img
Check your phone's display, as recovery is being sent and flashed to your device.
Check your command prompt/shell to make sure the process is over.
i got all that from Binary100100 who got it from here http://wiki.cyanogenmod.com/index.php/RE-recovery-img
give that a shot
also maybe this might help
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2
I seem like I cannot use the fastboot command in 1.33.0006 SPL??
Whenever I type a fastboot command and press enter, I always get an error message.
>> ... FAILED (remote: not allow)
Do we have any windows application that can help to bypass all checking on the phone stats and proceeds with fastboot flash directly?
Perfected spl, you need to make yourself a goldcard
Goldcard doesn't seem to work..
Whenever I try to flash a new radio, it prompted me an error message "Main version is older!"..
What to do?
when it says main version is older it means you need the goldcard.
do you have a working goldcard? if not use this
http://revskills.de/downloads/psas.zip it will make the gold card.
No need for phone?
Hello there.
I was reading this thread and I'm having a similar problem.
I have a question, sike89.
Is it possible to create the goldcard just with the software you mentioned?
My magic 32a will only go into fastboot (stuck at splash screen) and so
I won't be able to use my phone to create the card.
Thanks!
As mentioned by YamatoDelgato, I cannot boot up my phone and thus far I am unable to re-create a goldcard.
But this "goldcard" I am using right now was a working goldcard and I am surprised that it doesn't work all the times..
By the way, I found an alternative on internet saying that you can use other HTC Magic phone to create a goldcard for your phone; Although I am not sure if its gonna work out, just give it a shot..
Sike89, am I right to say that this application does not require any HTC phone in order to create a goldcard?
I can just format my SD card using PC and input the necessary information into the application to create goldcard, is it true?
Problem Solved...with a Sacrifice.
Well I managed to get my phone booting again.
I have a rogers phone so I used their "mandatory"
update (2 sappimgs) to get my phone working again.
However, this resulted in getting the dreaded
SPL 1.76.0010 meaning I can't root it easily.
However, I know that with a working
phone that I now have, I could use it to obtain
a gold card.
Boy that was scary!
I'm so scared to try rooting again but I probably will hehe !
Thanks to xda community and google search!
I lost my original nandroid backup but did manage to install an original ROM on my 32B (Vodafone). Took some work but it worked Afterwards I wrote a tutorial about it (google How to restore your custom ROMed HTC Magic (Vodafone 32B) – a walk through, I can't post links yet).
UPDATED!!!------------------------------------------------------------------------------------------------------------------------------
So I now have HBOOT!!! yay I missed those skateboarding androids
I want to be very careful from here on, so with hboot working is there anything I can do to get my phone back?
how I got hboot back:
I took the rom file out of a Australian RUU
replaced the radio with the one I currently have 3.22.20.17
replaced the hboot with a compatible one ( or so I thought )
and ran the mod'd RUU, which allowed it to get past the radio installation and instal new hboot
I am of course still semi bricked as I get a boot-loop ( sits at HTC magic screen for a few minutes than reboots )
and I still dont have access to recovery
I am still unrooted
and I still have a mismatched hboot/radio ( lol I ment to flash 1.33.0010H but I ended up flashing 1.76.0010H ) DOH!
so here I am with:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (sapp50000)
CPLD-12
RADIO-3.22.20.17
jan 14 2010, 00:14:58
------------------------------------------------------------------------------------------------------------------------------------------
So I think I may have bricked my magic
from everything I've read, I cant seem to find a working fix for my problem.
I was originally on CM6 and decided I wanted a sense rom so I installed sfm 1.0
http://forum.xda-developers.com/showthread.php?t=1025330
after running it for a bit I realized I couldn't get data access and found out I didn't upgrade my radio to 6.35.16.19
I also discovered for some reason I lost root.
I did something stupid without researching I went to the tutorial I used to originally root my phone.
http://greatbigdog01.wordpress.com/2010/07/12/new-shorter-rogers-magicmagic-rooting-guide/
at step 4 while installing the RUU it got stuck installing the radio and sat at 36% so like an idiot I pulled the battery.
now I am at a RUU USB screen
there is a picture of a microchip with a red x through it at the bottom
I have no recovery
I can run fastboot
I can only run adb shell after using "fastboot oem boot" which loads SFM 1.0
Every RUU Ive tried stalls installing the radio
everything I've tried to get root back fails
everything Ive tried to get recovery fails
any help on this would be immensely appreciated
Thanks
Dan
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP50000)
CPLD-2
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
This may just totally frag my phone but I was wondering if this might work.
I've read a few posts of people fixing there 32b that was flashed using a 32a rom by flashing another 32a rom ( usually the Arabic one for some reason ) which gets them up and running to switch back over to 32b
would flashing a 32b rom just be a very very bad idea?
also I have access to another magic, could I use that in anyway to get me going.
just spit-balling ideas, dont really know enough to proceed without some advice.
Wow!! If Ive stumped the genius's here, I must really be screwed...
I tried a séance, and a little bit of black magik, in hopes of bring my phone back to life, unfortunately it didn't work.
any other idea's?
I'm pretty sure I can correct your issue with JTAG. PM me if you are interested in this as well as any others that see this.
Some new progress, read original post for update.
I tried something totally crazy without knowing what it would do, but it got me hboot back....lol
Just need to know where to go from here!
Thanks
Dan
Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.
Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk
hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol
5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk
But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.
those all sound like bricks..
problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.
huahua!!!!
No one post about my problem...
OK i've seen a million of these threads and i just want to confirm that i've bricked the htc magic my brother JUST gave me. It was running cm6 froyo redux and i wanted to get ginger yoshi on there. To do that i had to change the radio. I flashed the radio and then restarted as instructed. But then the phone went into boot loop. I can't boot into recovery and i'm not entirely sure how to access the bootloader. It is S-OFF if that gives me any hope at all.
Thanks for any help
If you have s off you could try mumilovers fastboot commander....I say this method as i found it so easy, just make sure u know what phone u have before doing anymore
Sent from my HTC Magic using XDA App
Yeah. Fastboot commander is great tool.
Btw, three modes:
Back + Power (fastboot)
Home + Power (recovery)
Volumedown + Power (hboot)
If phone does not load into any mode => brick
Sent from my A7-040 using Tapatalk
thanks guys. Will try today and get back to you
Sent from my HTC Desire S using xda premium
no luck getting into any of those modes. still getting boot loop.
almost had a glimpse of hope. Turned phone on and it didn't go into a boot loop. However, i foolishly turned it off to access fastboot. Will try again later and see.
You must turn phone off before load into any mode. Remove battery and place it back when bootlooping
Similar Problem!
Hey guys! I got a similar problem. I tried to get Ginger Yoshi 1.5 on my phone but had to change the radio and spl. I managed to change them both to 3.22 radio and 1.33.2010 spl but it changed from 32A to 32B. When I saw that I thought something must had gone wrong. I tried changing it back but what I did was a mistake, I think I flashed the stock spl wich I think it was 1.33.0013. I am now going crazy because my phone wont boot or go into recovery mode, all I get is fastboot mode but when I try to flash a new spl or radio I get "FAILED (remote: not allowed)" . Now I'm stuck with that problem and don't know what to do. Any help? (I posted here because all other threads seem to be from 2010, they're old and nobody answers them, and because it is a similar problem).
Thanks!
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
OCT 21 2009, 22:33:27