install android on rom 3.14.531 - HD2 Android Q&A, Help & Troubleshooting and Genera

I recently sent my HD2 for repair and they gave it a new motherboard. I am now running ROM 3.14.531.1and radio 2.15.50.14.
prior to this I could run androin from my nand however now I am able to flash to CustomRUU. can anyone help with this issue
thanks

okay I just read that I need to have rom 2.10.....
please confirm this is the case.
thanks

bookyjam said:
okay I just read that I need to have rom 2.10.....
please confirm this is the case.
thanks
Click to expand...
Click to collapse
you need to flash hspl 2.08
then MAGLDR 1.13
CWM RECOVERY (correct system partition etc)
and then the rom
i would recommend you to make before all these task29
an of course for details search in the forum there are very good guides.

No, don't downgrade. With ROM 3.14 you have the latest radio and stuff built in so you can skip some steps.

Related

Question About Radios [Not Too nooby, Sorry For Inconvenience but i have to ask]

since the new nand android got released for the leo...i have one question about flashing which i just cant understand is this how it goes? ->
1) install hspl3 anything 2.08 or higher as mskip said.
2) install magldr version 1.something or higher
3) install nand Rom (Nand Version Only Not the sd Ones) By going into usb flasher mode...
the only thin i cant understand is where does radio come into all of this...on mskip's tutorial he says use 2.08 radio or higher....
are these hacked radio's or just the same firmware needed to run radio devices on android ?
and when we install like a cyanogen nand or the desire nand do we have to update the radio to a particular version or something?
i understood everything about hspl and magldr and android nand...just cant get where the radio comes into all of this...some guides dont even have radio mentioned.....
do we just need to have 2.08 or higher and just leave it and forget about it...or do we need to upgrade to a particular version....
will it harm the phone if i upgrade or should i just blindfolded upgrade to the latest 2.15 or something(dont know the version number)
i hope i havent troubled you guys a lot...just needed this clear for myself and maybe the community....sorry for the incoveneince
can any1 please help me out?
Just make sure you've got a suitable radio, as you said, and that's it. You don't need to update it when you flash new builds.
Sent from my HTC HD2 using XDA App

NAND Question!

Hi there,
I have got a problem. I have managed to changed my stock ROM from 3.14 to 1.66 because i wanted to NAND my Hd2. But the problem is after installing HSPL2 or HSPL 3 and then installing MAGLDR 1.11 i get white screen with HTC logo. I have read somewhere that it doesnt work with 1.66. Because i cannot find any different Stock ROM than 1.66 and 3.14 does it mean i cannot install it at all ? Thanks
viperek027 said:
Hi there,
I have got a problem. I have managed to changed my stock ROM from 3.14 to 1.66 because i wanted to NAND my Hd2. But the problem is after installing HSPL2 or HSPL 3 and then installing MAGLDR 1.11 i get white screen with HTC logo. I have read somewhere that it doesnt work with 1.66. Because i cannot find any different Stock ROM than 1.66 and 3.14 does it mean i cannot install it at all ? Thanks
Click to expand...
Click to collapse
keep 3.14 and flash yourself a radio which supports 576 ram (if your recent rom doesnt already contain such radio). the right radios have a .50 in its version
So i install 3.14 with radio .50 then install HSPL 3 ? then MAGLDR 1.11 and thats it ? I can continue NAND my HD2? Thanks for quick replay
viperek027 said:
So i install 3.14 with radio .50 then install HSPL 3 ? then MAGLDR 1.11 and thats it ? I can continue NAND my HD2? Thanks for quick replay
Click to expand...
Click to collapse
i didnt flash a nand rom yet, but i think i read that you should use hspl 2.08.
basically it cant be wrong the way you posted, but check nand threads about proper installation.
i somehow managed to downgrade to 2.08 but it bricked windows. But then MAGLDR started up and i have now got NAND on my HD2. Thanks
Same problem
Hello, I recently got a new hd2 because my old one broke and it has the 3.14 rom preloaded on it, I can't find anywhere to download the older rom so I can load MAGLDR111 to load NAND android, can anyone post a link to older roms for US t-mobile HD2 or is there a work around to install MAGLDR111?
Thanks for quick response
Flash the radio...
TelemakosFTW said:
Hello, I recently got a new hd2 because my old one broke and it has the 3.14 rom preloaded on it, I can't find anywhere to download the older rom so I can load MAGLDR111 to load NAND android, can anyone post a link to older roms for US t-mobile HD2 or is there a work around to install MAGLDR111?
Thanks for quick response
Click to expand...
Click to collapse
well afaik you do not need to flash anything with t-mobile hd2, you already got a radio version which supports 576mb ram. why should you downgrade to an older winmo rom?
you're ready to go, so you can just go through magldr and android installation

Help installing WM7 on HTC HD 2 Leo

Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
You need to go to HTCs website and download an earlier version of the 3.14 ROM - 1.66 (HTC) or 1.72 (if it is branded). You will need to use your phone's serial number to download the ROM.
Flash the ROM. Now your SPL will be 1.66.0000
Now you can run HSPL2 and select 2.08.HSPL
Download the 2.15.50.14 RADIO (look in the WinMo6.5 ROM sectrion on here for it) and flash the RADIO.
It is now ready to start the WP7 flashing process.
Pay Attention!!!!
goran.mitrovic said:
Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
Click to expand...
Click to collapse
Hey you dont need to flash HSPL2, search for the HSPL3 and flash that one after following fred_up's instruction and magldr 1.11 dont work for wp7 you need to flash 1.12 before you can flash wp7 into your hd2 dont forget that is the only bootloader that works for windows phone 7 dude, be care, dont brick your phone, dont forget to hit the "Thanks Button" happy flashing
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
goran.mitrovic said:
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
Click to expand...
Click to collapse
I think the stock rom should be there in the wiki

[Q] Will winmob7 be possible for me?

Hey everybody,
I have
SPL-3.03.0000 XE
R 2.15.50.14
on my HD2.
The Problem is, that no flash worked for me.
I can run Coustom-Roms[SD] with this stock-rom perfectly, but everything else isn't possible for me...
I hope someone can help me out my misery.
Sorry for my bad english and thanks for every help
You should really read all the threads on here about WP7. If you did you would know that you need HSPL 2.08 on your device for magldr to run.
The radio you have is fine, but you need to install an older stock ROM to downgrade your SPL first.
Check out Cotulla's MAGLDR thread
http://forum.xda-developers.com/showthread.php?t=893618
Beany69 said:
You should really read all the threads on here about WP7. If you did you would know that you need HSPL 2.08 on your device for magldr to run.
The radio you have is fine, but you need to install an older stock ROM to downgrade your SPL first.
Check out Cotulla's MAGLDR thread
http://forum.xda-developers.com/showthread.php?t=893618
Click to expand...
Click to collapse
Thanx for your help,
but the problem is, that i can't downgrade. It always stucks in the "loading..."-screen...
you should really go and read the threads. There are tons of threads on how to downgrade SPL.
Kailkti said:
you should really go and read the threads. There are tons of threads on how to downgrade SPL.
Click to expand...
Click to collapse
I know how to downgrade. I have done it about 10 times on HD2.
but my HD is the first I failed.

hi! i upgrade my hd2 to android but........

i upgrade my hd2 to android i use 2.3.3 HyperDroidGBX11 everything goes ok..
but when i install any games from the market the sound on airpiece change to robotic sounds...
i aready try to flash the radio to
Radio 2.10.50.28_2
Radio 2.11.50.26
Radio 2.12.50.02_2
Radio 2.14.50.04
flash also the rom to
2.12
2.15
but the problem is still same?
whats wrong..? help !
NamiscA said:
i upgrade my hd2 to android i use 2.3.3 HyperDroidGBX11 everything goes ok..
but when i install any games from the market the sound on airpiece change to robotic sounds...
i aready try to flash the radio to
Radio 2.10.50.28_2
Radio 2.11.50.26
Radio 2.12.50.02_2
Radio 2.14.50.04
flash also the rom to
2.12
2.15
but the problem is still same?
whats wrong..? help !
Click to expand...
Click to collapse
I am using Hyperdroid GBX too and I have not had that issue. I am using Hyperdroid v9.0 and radio 2.15.50.14. Try flashing the same radio as I have and see if that helps.
Recommend using the latest 2.15.50.14 + hspl2.08, and cancel buttons voice, to see if solve the problem
leyong121 said:
Recommend using the latest 2.15.50.14 + hspl2.08, and cancel buttons voice, to see if solve the problem
Click to expand...
Click to collapse
Hey leyong and welcome to XDA-Developers. I see you are still daily new to XDA so I say this to you with much respect. Please read all post of a thread if it is still fairly short like this thread is as you maycfind your suggestion has already been posted. I understand if the thread is huge but if it is only one to three pages long read them all. I had already told the OP to try upgrading to radio 2.15.50.14 as this is the radio I use and I also use Hyperdroid on my HD2 and do not have those issues he they do.
Also if you use MAGLDR you have to have HSPL 2.08 cause MAGLDR will not work with any other HSPL right now. Now if you are using cLK to boot Android you don't have to have HSPL 2.08 but it is recommended or HSPL 3.03. Just trying to help you out some.
Cheers
T-Macgnolia said:
Hey leyong and welcome to XDA-Developers. I see you are still daily new to XDA so I say this to you with much respect. Please read all post of a thread if it is still fairly short like this thread is as you maycfind your suggestion has already been posted. I understand if the thread is huge but if it is only one to three pages long read them all. I had already told the OP to try upgrading to radio 2.15.50.14 as this is the radio I use and I also use Hyperdroid on my HD2 and do not have those issues he they do.
Also if you use MAGLDR you have to have HSPL 2.08 cause MAGLDR will not work with any other HSPL right now. Now if you are using cLK to boot Android you don't have to have HSPL 2.08 but it is recommended or HSPL 3.03. Just trying to help you out some.
Cheers
Click to expand...
Click to collapse
HSPL 2.08
magldr 1.13
clock recovery
is installed on my hd2...
anyway may problem is solve but still under observation......
because some application when i try to instal cost the android sound......

Categories

Resources