An update for G3 (i5801) was released on 28th Aug and i heard some of you had trouble updating via Kies so i uploaded the factoryfs.rfs file
Here is the link
http://www.mediafire.com/?i3iq97i7acko83m
darksyde18 said:
An update for G3 (i5801) was released on 28th Aug and i heard some of you had trouble updating via Kies so i uploaded the factoryfs.rfs file
Here is the link
http://www.mediafire.com/?i3iq97i7acko83m
Click to expand...
Click to collapse
here goes a thanx button on your way .. how to flash it tho??
but its not a .tar file ... u need to use total commander ..
satyamsit said:
here goes a thanx button on your way .. how to flash it tho??
Click to expand...
Click to collapse
use total commander to convert it to .tar and flash it
satyamsit said:
but its not a .tar file ... u need to use total commander ..
Click to expand...
Click to collapse
How to use Total Commander?
Please help.
sekhargreen said:
How to use Total Commander?
Please help.
Click to expand...
Click to collapse
download it from the link below
http://www.ghisler.com/download.htm
install it and open factoryfs.rar with tot comm.. on the left pane of tot comm u can see the factoryfs file.. just select it and choose pack file from toolbar above... select tar format then ok ... it will save at temp location ..
plzz get back once flashing done successfully ... cheers !!
satyamsit said:
download it from the link below
http://www.ghisler.com/download.htm
install it and open factoryfs.rar with tot comm.. on the left pane of tot comm u can see the factoryfs file.. just select it and choose pack file from toolbar above... select tar format then ok ... it will save at temp location ..
plzz get back once flashing done successfully ... cheers !!
Click to expand...
Click to collapse
Is it safe to flash?
Any Soft brick or hard brick chances ?
darksyde18 said:
An update for G3 (i5801) was released on 28th Aug and i heard some of you had trouble updating via Kies so i uploaded the factoryfs.rfs file
Here is the link
http://www.mediafire.com/?i3iq97i7acko83m
Click to expand...
Click to collapse
Dude could you please backup the ROM via g3mod kernel's multiboot and upload system.img?
Sent from my GT-I5800 using Tapatalk
"cannot open the serial port error" while flashing the .tar ..........
system.img please
Hindi is supported now
Dont see much change in the new update but now the phone supports hindi as not seeing the blocks in apps. Anybody noticed any major change?
Not sure But I feel battery backup is better than JP4 ... earlier i used to drop to 90 from full charged in a blink of an eye after getting fully charged.. it never happened on JP6 as of now ..
guys,,,,by d above method
for installing ddjp6,, i did, but whn checked d .tar file created,,, it isn't having modem.bin, datafs.rfs nd zImage files...is it still safe to flash..??? also if nt.... is dere any oder download link fr a .tar file wid a safe flash?? plz help out guys... nd do rply soon...
prads5801 said:
guys,,,,by d above method
for installing ddjp6,, i did, but whn checked d .tar file created,,, it isn't having modem.bin, datafs.rfs nd zImage files...is it still safe to flash..??? also if nt.... is dere any oder download link fr a .tar file wid a safe flash?? plz help out guys... nd do rply soon...
Click to expand...
Click to collapse
u have to download ddjp2/ddjp4 first .. then use total commander to open it .. delete the factory.fs from jp4 .tar .... and drag this downloaded factoryfs to jp4 .. ur JP6 is ready ... with a much linear and stable battery ..
and do flash eclair first before u flash this .. cheers !!
satyamsit said:
u have to download ddjp2/ddjp4 first .. then use total commander to open it .. delete the factory.fs from jp4 .tar .... and drag this downloaded factoryfs to jp4 .. ur JP6 is ready ... with a much linear and stable battery ..
and do flash eclair first before u flash this .. cheers !!
Click to expand...
Click to collapse
Could you do all the things we need to do before uploading?
thanks I have updated to JP6
satyamsit said:
u have to download ddjp2/ddjp4 first .. then use total commander to open it .. delete the factory.fs from jp4 .tar .... and drag this downloaded factoryfs to jp4 .. ur JP6 is ready ... with a much linear and stable battery ..
and do flash eclair first before u flash this .. cheers !!
Click to expand...
Click to collapse
thanz..... flashd successfully..... cheers...
Hi guys. I dint find an update for my phone to ddjp6 on kies,but found a new firmware i5801 dxjpc 2.2(asia). Any1 else tried it?
DDJP6 is good as far as performance is concerned........it is lot more faster than DDJP4....using launcher pro makes it lot more usable
raja4sure said:
DDJP6 is good as far as performance is concerned........it is lot more faster than DDJP4....using launcher pro makes it lot more usable
Click to expand...
Click to collapse
yes,
this one is faster
BUT I am facing click sounds during calls with stocked kernel. Anyone facing same?
Works fine with fugumod kernel. but somehow I feel performance is degrading.
Any suggestions ?
Related
Hi to everybody
i am posting this noob question for a friend of mine. could somebody explain the difference between 5360 and 5369 ? cause we are trying to root the 5639 with no success and wondering whether files for 5360 could be used for 5369
thanks in advance
Troubleshooter
Download compatible superuser from market ...
download the zip file i gave you
extract it
put superuser in this folder system > app > here
zip it up
and flash it from Recovery
there... you rooted your phone
Hit thanks
Ironandroid said:
Hi to everybody
i am posting this noob question for a friend of mine. could somebody explain the difference between 5360 and 5369 ? cause we are trying to root the 5639 with no success and wondering whether files for 5360 could be used for 5369
thanks in advance
Click to expand...
Click to collapse
i think the model 5639 was released in only some specific regions....its carrier locked...
i think its for european region....
anmolsharma1293 said:
i think the model 5639 was released in only some specific regions....its carrier locked...
i think its for european region....
Click to expand...
Click to collapse
As matter of fact we are european (italy). Btw are you aware of rom compatibility between these two phones ?
Imranabbas22 said:
Download compatible superuser from market ...
download the zip file i gave you
extract it
put superuser in this folder system > app > here
zip it up
and flash it from Recovery
there... you rooted your phone
Hit thanks
Click to expand...
Click to collapse
Thanks. Btw, what do you mean by zip it up ? Thanks
Ironandroid said:
Hi to everybody
i am posting this noob question for a friend of mine. could somebody explain the difference between 5360 and 5369 ? cause we are trying to root the 5639 with no success and wondering whether files for 5360 could be used for 5369
thanks in advance
Click to expand...
Click to collapse
Galaxy Y 5369 is an Italian galaxy Y Branded. Install a stock rom of 5360 with odin, then root your phone. you can root galaxy y 5369, but it is preferable to install the stock rom of 5360. you can root your phone with SuperSu: http://forum.xda-developers.com/showthread.php?t=1538053
Or you can try with this Zip (superuser): https://hotfile.com/dl/153908281/648b884/updates5360.zip.html
Try!
Sorry my bad english!!!
Zip it up means compress it using winrar... make sure you select 2 folders > META-INF na dSystem and then right click on them and then add to archive
select zip compress method and zip it up my friend
Imranabbas22 said:
Zip it up means compress it using winrar... make sure you select 2 folders > META-INF na dSystem and then right click on them and then add to archive
select zip compress method and zip it up my friend
Click to expand...
Click to collapse
Thank you very much . I will try and report to you
Imranabbas22 said:
Zip it up means compress it using winrar... make sure you select 2 folders > META-INF na dSystem and then right click on them and then add to archive
select zip compress method and zip it up my friend
Click to expand...
Click to collapse
Tried but did not work. I think that is carrier locked and so the only way is odin flash a stock rom for 5360 and root i. Thanks anyhow
Ironandroid said:
Tried but did not work. I think that is carrier locked and so the only way is odin flash a stock rom for 5360 and root i. Thanks anyhow
Click to expand...
Click to collapse
Root your device with this flashable zip!
Imranabbas22 said:
Root your device with this flashable zip!
Click to expand...
Click to collapse
tried but did not work. it says installation aborted. with the others flashable zip the procedure went fine but when checked the phone was still not rootedthanks for the effort anyhow.
Extract the file first ... You will find update.zip in it ... Flash that one ... Not the galaxy s5369 ...
Sent from my GT-S5360 using xda app-developers app
Done but did notte work
Imranabbas22 said:
Extract the file first ... You will find update.zip in it ... Flash that one ... Not the galaxy s5369 ...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Done but with no result
R: difference between 5630 and 5639
Flash a stock rom (gt-s5360) and then root your phone.
~Tapatalk2~
Imranabbas22 said:
Extract the file first ... You will find update.zip in it ... Flash that one ... Not the galaxy s5369 ...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
here it is
R: difference between 5630 and 5639
If you flash a stock rom of 5360, when you're going to root your phone you won't have any problem. Then you can also change kernel or install a custom rom. The brand cause conflicts with custom mod.
Sorry my bad english!
~Tapatalk2~
and your phone will be completely s5360
R: difference between 5630 and 5639
Yes! Exactly!
~Tapatalk2~
hey guys my friend downloaded the 4.3.3 firmware for i9500,but the problem is that he extracted it,now i have 4 files but i dont know how to flash it via odin,,i mean where to put which file ,, the files i have are
AP_I9500XXUEMJ5_1875800_REV00_user_low_ship.tar.md5 and the file size is 21,46,971 KB
BL_I9500XXUEMJ5_1875800_REV00_user_low_ship.tar.md5 2121 KB
CSC_ODD_I9500ODDEMJ5_1870108_REV00_user_low_ship.tar.md5 78381 KB
MODEM_I9500DDUEMJ5_REV01_CL1413829_SIGNED.tar.md5 15631 KB
plzz help
Nexsss1 said:
hey guys my friend downloaded the 4.3.3 firmware for i9500,but the problem is that he extracted it,now i have 4 files but i dont know how to flash it via odin,,i mean where to put which file ,, the files i have are
AP_I9500XXUEMJ5_1875800_REV00_user_low_ship.tar.md5 and the file size is 21,46,971 KB
BL_I9500XXUEMJ5_1875800_REV00_user_low_ship.tar.md5 2121 KB
CSC_ODD_I9500ODDEMJ5_1870108_REV00_user_low_ship.tar.md5 78381 KB
MODEM_I9500DDUEMJ5_REV01_CL1413829_SIGNED.tar.md5 15631 KB
plzz help
Click to expand...
Click to collapse
You just need to compress these 4 files into a tar archive. There are a few software out there that you can use to do this. Do a search and you'll find.
srry put can u plzz post a link
Nexsss1 said:
hey guys my friend downloaded the 4.3.3 firmware for i9500,but the problem is that he extracted it,now i have 4 files but i dont know how to flash it via odin,,i mean where to put which file ,, the files i have are
AP_I9500XXUEMJ5_1875800_REV00_user_low_ship.tar.md5 and the file size is 21,46,971 KB
BL_I9500XXUEMJ5_1875800_REV00_user_low_ship.tar.md5 2121 KB
CSC_ODD_I9500ODDEMJ5_1870108_REV00_user_low_ship.tar.md5 78381 KB
MODEM_I9500DDUEMJ5_REV01_CL1413829_SIGNED.tar.md5 15631 KB
plzz help
Click to expand...
Click to collapse
i think this is what you need to do. not sure.
http://forum.xda-developers.com/attachment.php?attachmentid=2029794&stc=1&d=1370803390
taken from this thread http://forum.xda-developers.com/showthread.php?t=2317105
resitm said:
i think this is what you need to do. not sure.
http://forum.xda-developers.com/attachment.php?attachmentid=2029794&stc=1&d=1370803390
taken from this thread http://forum.xda-developers.com/showthread.php?t=2317105
Click to expand...
Click to collapse
odin just hangs when i use the tar file created from the app...
I tihnk you know what to do with those :
Code:
PIT if you **** something up :
NOTE.pit
[url]http://www50.zippyshare.com/v/47648425/file.html[/url]
BL :
[B]BL_N8000XXUDND5.tar[/B]
[url]http://www13.zippyshare.com/v/45313724/file.html[/url]
MODEM :
[B]MODEM_N8000XXUDND2.tar[/B]
[url]http://www64.zippyshare.com/v/59505193/file.html[/url]
CSC :
[B]CSC_OXA_N8000OXADND5.tar : [/B]
CSC_OXA_N8000OXADND5.zip
[url]http://www67.zippyshare.com/v/82582924/file.html[/url]
CSC_OXA_N8000OXADND5.z01
[url]http://www48.zippyshare.com/v/56875063/file.html[/url]
CSC_OXA_N8000OXADND5.z02
[url]http://www39.zippyshare.com/v/97261232/file.html[/url]
AP:
[B]AP_N8000XXUDND5.tar [/B]:
AP_N8000XXUDND5.zip
[url]http://www57.zippyshare.com/v/73873394/file.html[/url]
AP_N8000XXUDND5.z01
[url]http://www3.zippyshare.com/v/46722430/file.html[/url]
AP_N8000XXUDND5.z02
[url]http://www30.zippyshare.com/v/47884001/file.html[/url]
AP_N8000XXUDND5.z03
[url]http://www32.zippyshare.com/v/39571794/file.html[/url]
AP_N8000XXUDND5.z04
[url]http://www65.zippyshare.com/v/21536434/file.html[/url]
AP_N8000XXUDND5.z05
[url]http://www69.zippyshare.com/v/78725952/file.html[/url]
AP_N8000XXUDND5.z06
[url]http://www35.zippyshare.com/v/63192076/file.html[/url]
Total size is 1.7 GB
cd693fa332ba726865f2a4c9deb8bcf8 *AP_N8000XXUDND5.z01
7bb5c3d04a78ce33a25d290e9e94449f *AP_N8000XXUDND5.z02
930b5e9b9967ce8bbe86636300306a11 *AP_N8000XXUDND5.z03
efed7941769df605fbe6688c90ab81ba *AP_N8000XXUDND5.z04
cc5e7392fd478c5ef5f323ec51670abc *AP_N8000XXUDND5.z05
84717273ef520fd5c0ca75a606744bf9 *AP_N8000XXUDND5.z06
e125605342807fe474903fef7ca9c873 *AP_N8000XXUDND5.zip
806c518c6e1ceb508c469f7a607dd753 *BL_N8000XXUDND5.tar
e88023c8350a74bb78ba6412aa8f71bb *CSC_OXA_N8000OXADND5.z01
1b7a5a5c93508c3b8ba5e5c094ba0307 *CSC_OXA_N8000OXADND5.z02
ab7450381eef3797c009c264081d9d78 *CSC_OXA_N8000OXADND5.zip
09c4f509d471d857f292c603d147ffe1 *MODEM_N8000XXUDND2.tar
Thanks!!
Great neeew!! Now we need 4.4.2 for the 8010/8013!!
Thanks !! And what about the 8010/8013 version ?
You can add the N8010?
These files are not very heavy, do not think they are the roms, as installed? works with odin?, my to install my tablet stays in download mode
1.86 mb? This isn't the full update file, it didn't upload properly
Sent from my SM-N900P using Tapatalk
This clearly isnt a samsung rom or any rom of any sort, not at those file sizes, what is this junk?
Guys, can you read?
It clearly says :
CSC :
CSC_OXA_N8000OXADND5.tar
uploading...
AP:
AP_N8000XXUDND5.tar
uploading...
CSC and AP tomorrow/saturday
Click to expand...
Click to collapse
AP is the whole operating system to flash! This file may be over 1Gb .
i will believe it when i see if, nothing anywhere about any kitkat leaks, no explanation from OP where it came from... very suspect.
Could someone post screenshots please?
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
da.trute said:
i will believe it when i see if, nothing anywhere about any kitkat leaks, no explanation from OP where it came from... very suspect.
Click to expand...
Click to collapse
Because you totaly cant check someones thread history and thanks meters
where it comes from?
izap said:
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
Because you totaly cant check someones thread history and thanks meters
Click to expand...
Click to collapse
Izap, thanks sharing this files, could you explain where the files come from?
izap said:
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
Because you totaly cant check someones thread history and thanks meters
Click to expand...
Click to collapse
I would try to flash it on my n8010. But if it fails, can i flash back to 4.1.2 or a rom?
beginner said:
Izap, thanks sharing this files, could you explain where the files come from?
Click to expand...
Click to collapse
Santa Claus
Akeel1994 said:
I would try to flash it on my n8010. But if it fails, can i flash back to 4.1.2 or a rom?
Click to expand...
Click to collapse
Probably
If you put BL, AP and CSC in good places in Odin it shouldn't fail.
If it fails on the very beginning then it's just not compatible with N8010 and nothing bad should happen.
Okay, I see there are different parts of AP for example. How can I make one zip of them?
Akeel1994 said:
Okay, I see there are different parts of AP for example. How can I make one zip of them?
Click to expand...
Click to collapse
You unpack them into 1 tar file.
If you dont know what you are doing please dont do it. I posted it here on developers forum for people who know what to do.
Why parts? Because zippyshare has 200MB limit.
That is not a problem. I already flashed a lot of roms and worked with odin. But I never used zip files which were splited. So to make it clear: I download and mark the parts and zip them to a .tar archive. Right?
izap said:
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
Because you totaly cant check someones thread history and thanks meters
Click to expand...
Click to collapse
should have, didnt really have time, made an incorrect assumption, apologies. Holding my hands up !
Akeel1994 said:
That is not a problem. I already flashed a lot of roms and worked with odin. But I never used zip files which were splited. So to make it clear: I download and mark the parts and zip them to a .tar archive. Right?
Click to expand...
Click to collapse
LOL, Not quite. You would download them all, then use 7-Zip or something like that to unpack the first one in the series. It will unpack them all, and the result should be one .tar file
Sent from my GT-N8013 using Tapatalk
Thank you!
Can someone make a screenshot?
Verstuurd vanaf mijn GT-I9300 met Tapatalk
Hello everyone ..... my phone wont turn on wifi or bluethoot, i change the rom the modem and nothing happens , I did the data reset the wipes and nothing at all happens ...any help will be grateful ,now i have the TTT trinidad and tobago rom
es_loq_hay said:
Hello everyone ..... my phone wont turn on wifi or bluethoot, i change the rom the modem and nothing happens , I did the data reset the wipes and nothing at all happens ...any help will be grateful ,now i have the TTT trinidad and tobago rom
Click to expand...
Click to collapse
Hi ,
Wifi is kernel control , change kernel or reflash it , Perseus had some issues in the past with wifi
MAX 404 said:
Hi ,
Wifi is kernel control , change kernel or reflash it , Perseus had some issues in the past with wifi
Click to expand...
Click to collapse
yes i have perseus now ,and i change the kernel before anything happens to me Recommend me some? sorry if you do not understand I 'm copying and pasting from google translator
es_loq_hay said:
yes i have perseus now ,and i change the kernel before anything happens to me Recommend me some? sorry if you do not understand I 'm copying and pasting from google translator
Click to expand...
Click to collapse
Hi ,
No problem .
you could try Omega kernel
download Omega Files free
https://play.google.com/store/apps/details?id=net.indieroms.OmegaFilesJB&hl=en
Select i9500 / 4.4.2 / all rooted roms/kernel/ Omega Kernel / download ......flash from recovery
or Maxfour from here
http://forum.xda-developers.com/showthread.php?t=2668170
MAX 404 said:
Hi ,
No problem .
you could try Omega kernel
download Omega Files free
https://play.google.com/store/apps/details?id=net.indieroms.OmegaFilesJB&hl=en
Select i9500 / 4.4.2 / all rooted roms/kernel/ Omega Kernel / download ......flash from recovery
or Maxfour from here
http://forum.xda-developers.com/showthread.php?t=2668170
Click to expand...
Click to collapse
thanks but nothing happens another idea?
es_loq_hay said:
thanks but nothing happens another idea?
Click to expand...
Click to collapse
Hi
Switch wifi power saving off
Dial *#0011#
This will take u into the Service Mode
Press the left bottom key... A menu will popup....
Select Wifi... Once in the Wifi settings , turn it off...
Exit
Hope it works!
MAX 404 said:
Hi
Switch wifi power saving off
Dial *#0011#
This will take u into the Service Mode
Press the left bottom key... A menu will popup....
Select Wifi... Once in the Wifi settings , turn it off...
Exit
Hope it works!
Click to expand...
Click to collapse
nothing yet :crying:
es_loq_hay said:
nothing yet :crying:
Click to expand...
Click to collapse
what custom rom do you have? maybe is a rom problem
---------- Post added at 05:15 PM ---------- Previous post was at 05:11 PM ----------
es_loq_hay said:
nothing yet :crying:
Click to expand...
Click to collapse
Check this
Go to /system
Open the built.prop
search for ro.securestorage.support
If it says true , change to false
Save and reboot
Maybe is not saving the passwords..
MAX 404 said:
what custom rom do you have? maybe is a rom problem
Click to expand...
Click to collapse
Original rom from ttt trinidad and tobago rooted ... if de mac is wrong ? What can i do
MAX 404 said:
what custom rom do you have? maybe is a rom problem
---------- Post added at 05:15 PM ---------- Previous post was at 05:11 PM ----------
Check this
Go to /system
Open the built.prop
search for ro.securestorage.support
If it says true , change to false
Save and reboot
Maybe is not saving the passwords..
Click to expand...
Click to collapse
either and i think we're out of ideas :silly:
es_loq_hay said:
either and i think we're out of ideas :silly:
Click to expand...
Click to collapse
Hi ,
If it was working fine before rooting , maybe something went wrong , you could try to flash again your stock rom with Odin..or flash a custom rom and try, I am using Omega Rom is as close as you can get to stock , fast and stable.
Before you do anything , backup first , do not forget to backup your EFS folder.
MAX 404 said:
Hi ,
If it was working fine before rooting , maybe something went wrong , you could try to flash again your stock rom with Odin..or flash a custom rom and try, I am using Omega Rom is as close as you can get to stock , fast and stable.
Before you do anything , backup first , do not forget to backup your EFS folder.
Click to expand...
Click to collapse
this happened through the ota update, no when i decide be root
es_loq_hay said:
this happened through the ota update, no when i decide be root
Click to expand...
Click to collapse
+1 with @MAX 404
Reflash stock rom for your phone.. and let us know..
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
+1 with @MAX 404
Reflash stock rom for your phone.. and let us know..
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
es_loq_hay said:
this happened through the ota update, no when i decide be root
Click to expand...
Click to collapse
now i have the trinidad and tobago ariginal rom, i ve note in the efs folder in wifi folder I have nothing .....
if someone passes me without imei efs folder and I put my imei file... its work?
es_loq_hay said:
now i have the trinidad and tobago ariginal rom, i ve note in the efs folder in wifi folder I have nothing .....
if someone passes me without imei efs folder and I put my imei file... its work?
Click to expand...
Click to collapse
Hi ,
Mate , can you register in you carrier network , can you make phone calls?? if so your efs folder is fine , may be is just your explorer or that you are not root...dial *#06# or go to settings/more/about/status do you see the right imei there?
In the wifi folder is only the mac info check the settings/more/about/status do you see your mac there?
MAX 404 said:
Hi ,
Mate , can you register in you carrier network , can you make phone calls?? if so your efs folder is fine , may be is just your explorer or that you are not root...dial *#06# or go to settings/more/about/status do you see the right imei there?
In the wifi folder is only the mac info check the settings/more/about/status do you see your mac there?
Click to expand...
Click to collapse
yes.. the mac address is in there and the imei is fine
es_loq_hay said:
yes.. the mac address is in there and the imei is fine
Click to expand...
Click to collapse
Hi ,
check this out
http://forum.xda-developers.com/showpost.php?p=52989594&postcount=4899
Flash the param.bin file in PDA, to see if it help.
MAX 404 said:
Hi ,
check this out
http://forum.xda-developers.com/showpost.php?p=52989594&postcount=4899
Flash the param.bin file in PDA, to see if it help.
Click to expand...
Click to collapse
when i flash de param.bin the phone restarts in recovery mode y nothing nothing else happens
es_loq_hay said:
Hi ,
check this out
http://forum.xda-developers.com/showpost.php?p=52989594&postcount=4899
Flash the param.bin file in PDA, to see if it help.[/QUOT
when i flash de param.bin the phone restarts in recovery mode y nothing nothing else happens
Click to expand...
Click to collapse
Hi ,
You flashed the param.bin file and now you end up in recovery , cant boot?
What rom do you have now , from the pictures in your first post i assume you were in stock , flash a custom rom again or stock to get it back to work.
After that if you are skill and now how check if the antenna cable is well connected inside the phone
MAX 404 said:
Hi ,
You flashed the param.bin file and now you end up in recovery , cant boot?
What rom do you have now , from the pictures in your first post i assume you were in stock , flash a custom rom again or stock to get it back to work.
After that if you are skill and now how check if the antenna cable is well connected inside the phone
Click to expand...
Click to collapse
yes i have the trinidad and tobago rom rooted and the blue cable is well,and the rom is reinstaled now and no solution for now
Hey guys i need want to revert back to stock rom.help me !!!
I am currently on Lineage os .
I have found some stock roms that states its for asus zenfone max pro m2 and i want to get expertise advice on it and please provide with some tutorials !!!!
Please Help ASAP
Anson Varghese said:
Hey guys i need want to revert back to stock rom.help me !!!
I am currently on Lineage os .
I have found some stock roms that states its for asus zenfone max pro m2 and i want to get expertise advice on it and please provide with some tutorials !!!!
Please Help ASAP
Click to expand...
Click to collapse
Try this..
X10MINISTER said:
Im also new to asus series.btw u can try flashing this https://firmwarex.net/asus-zenfone-max-pro-m2-x01bd-zb630kl-zb631kl-official-firmware/ by fastboot.. but its version is .158 stock firmware. I've try this n its succeed.
Extract the file first.
Click to expand...
Click to collapse
Try downloading from the official Asus website:- https://www.asus.com/Phone/ZenFone-Max-Pro-M2/HelpDesk_Download/
X10MINISTER said:
Try this..
Click to expand...
Click to collapse
its .rar file not flashable file how to install ...anyone
theigk said:
its .rar file not flashable file how to install ...anyone
Click to expand...
Click to collapse
Does placing it on the root of your Memory not do anything? Like what you did in pie beta?
theigk said:
its .rar file not flashable file how to install ...anyone
Click to expand...
Click to collapse
Yeah..its not flashable using twrp ..extract the .rar file first.. Flash this by using fastboot mode..simply click on "flash" file then the flashing will start n ur data will erased
X10MINISTER said:
Yeah..its not flashable using twrp ..extract the .rar file first.. Flash this by using fastboot mode..simply click on "flash" file then the flashing will start n ur data will erased
Click to expand...
Click to collapse
What is the commands?
Hardbricked Asus zenfone max pro m2
Guyzz i have updated pie and there was bugs so i tried to revert back into oreo but my phone Hardbricked, it doesnt turns on but it is detecting by computer as qualcom 9008 comm , i have tried to flash through QFIL with a raw firmware i got from firmware27 website, but sahara error showing, i placed the firmware on qpst folder, i tried programmer emmc , 8916,633,660 emmc none of them solved, how can i get the correct firmware file for qfil and how can i get my phone's life back. . . Help me plz guyz. . .