Hello professionals ;-)
i have to delete some registry keys during an softwareinstall with a cab file.
Can anybody tell me how to make an installationfile (like *.cab ore something else) deletes some keys in the registry!
whatfor?
i want to install some programs (like pocket plus) and make some configuration during cab file installation. so i looked into the registry what changes when i configurate pocket plus.
as i noticed there where som keys changed i can overwrite with the new values BUT there are some registry keys deleted also. How get them out???
is there any way ??
Have a look at creating a custom setup.dll file to include in the cab file.
You can certainly delete registry entries using it.
I don't know about deleting registry using cab files.
I think there is only options to allow or not to replace a registry key if exists during install.
Here a good link for .cab files Cab files
Apart that you can make your own install from PC to Pocket using RAPI. With that no problem to delete keys, copy files, add new keys ...
want to delete some keys bevore install
Thank's for your tips!
Have a look at creating a custom setup.dll file to include in the cab file. You can certainly delete registry entries using it.
Click to expand...
Click to collapse
is there more information about this ?
how it works?
how to do?
as i looked at the CABFiles Website this looks very complicated to me ;-(
i am an absolute beginner in developing software!
i need an easy way to delete some regkeys during installation.
I think you can use the excellent scripting utility called nScriptM to achieve your goal. Simply run a search on this in google and you will come across a number of resources including the download location.
k_kirk said:
I think you can use the excellent scripting utility called nScriptM to achieve your goal.
Click to expand...
Click to collapse
i will try this, Thanks!
Hello. I dont want remove the cab from my SD after installation. I saw in somewhere that it is possible, but i didnt find again. Can you send me the link? Or the cab to do the registry change.
Tks.
Easy, go here with any registry editor:
HKCR\cabfile\Shell\open\command
It should looks like: wceload.exe "%1" /nodelete
Just remove /nodelete.
yes, that's the proper way to do it. If, like me, you always need* the latest ROM and are often reflashing, remember you could also make your cabs read-only.
I found it was easier to do this in the long term as I have many cabs stored on my PC and sometimes I was forgetting to edit reg. in newly installed ROM and losing cabs!
*like a fish needs a bicycle, I sometimes think...
Hello,
I'd like to introduce new registry editor CeRegEditor for WindowsCE, WindowsMobile
It works on desktop PC but operates on PDA's registry.
Main features:
- keys/values create and edit
- fast search
- export/import keys to/from REG file
- create "image" registry with compare and restore service
- free for private and commercial use
- registry compare to CAB or REG files
- open REG/RGU, CAB, HV as regular registry, with all edit functions available
...and many more
link to web site: http://ceregeditor.mdsoft.pl?lang=en
link to software: http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
It is still during test period, but basic features are well tested and stable
It is Polish software but with english interface
edit
If You find any error in the application or mistake in English interface please send an email to [email protected] or write it within thread
nice one! thanks!
It looks very nice! thanks
Hi!
Thanks a lot! The compare service makes it even easier to build OEM packages when kooking ROMs. Great software!
Regards,
PK
nice app.
good tool, many of cookers want to edit the registries using the PC
Nice software I have one suggestion: since this works on the desktop, one feature that would be neet was that if we install a CAB, it detects what's changed on the PPC, regarding the registry. That would be great to know what are the registry keys needed for the instalation of OEM packages!
dferreira said:
Nice software .... if we install a CAB, it detects what's changed on the PPC, regarding the registry. That would be great to know what are the registry keys needed for the instalation of OEM packages!
Click to expand...
Click to collapse
You can use compare tool embedded into CeRegEditor.
First, create registry image(Images->Create image or F2 key) and after cab instalation perform compare registry, Images->Compare registry. It will show only differences/changes between the image and the current registry
I hope this will be useful for You
Great Work
Great work, sounds cool...thanks !
Yes, very thanks so much!
NIce Progie thanx
New version 0.0.2.2
+ added UNICODE support for export/import data to/from REG file
+ fixed header in REG file. The string in header changed to REGEDIT4. Previous string was not compatible with some other registry tools (WinCE Cab Manager)
+ fixed format of path to directory/file in REG file.
...and some minor fixes
Thank you, I was using Mobile Registry Editor to edit registry directly from Desktop but your app look nice
New version 0.0.3.0 available
Some fixes and new features!
Now, compare tool handles CAB and REG files
So, it is possible to compare registry to CAB file or REG file, CAB to CAB, CAB to REG, REG to registry image, etc.
It's possible to check what changes will be made by CAB before CAB instalation
Update details: http://ceregeditor.mdsoft.pl/index.php?id=4&lang=en
Download: http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
cool... I will check this out soon.
@mdziedzic, curious how you are implementig the cab compare function... are you just looking at reg entries stored in the cab? Cos sometimes the complicated ones involve self-registering dlls and setup.dll files that make reg entries also. Prime examples of this are voice command, mark all as read, and some SPB apps. For those we always have to do a reg diff before/after cab install to see what the setup.dll did (or see the self-registered dll additions).
I have been wondering if it's possible to write an app that examines a setup.dll to see what reg entries it would create. So far I don't know of any way to do that other than reg dump->install cab->reg dump->compare.
Anyway your app will be very useful! Thanks for your hard work.
congratz.
widzisz? docenią....
luv2chill said:
@mdziedzic, curious how you are implementig the cab compare function... are you just looking at reg entries stored in the cab? {...cut...}
Click to expand...
Click to collapse
Yes, I compare only reg entries stored in cab!
luv2chill said:
I have been wondering if it's possible to write an app that examines a setup.dll to see what reg entries it would create.
Click to expand...
Click to collapse
I think it is not possible! Each developer/provider creates it's individual setup.dll for CABs. Each DLL could has different structure (written in C++ or Pascal). Trying to "decode" setup.dll will be always "guessig"!
luv2chill said:
So far I don't know of any way to do that other than reg dump->install cab->reg dump->compare.
Click to expand...
Click to collapse
IMO, for CABs with setup.dll or exe instalators it's the best metod. In CeRegEditor, just create registry image (F2)-> do instalations-> compare registry with image(F3). After compare You can save differences to REG file
luv2chill said:
Anyway your app will be very useful! Thanks for your hard work.
Click to expand...
Click to collapse
Great
New version 0.0.3.1 available
http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
Updates:
- fix in CAB-> REG conversion
great looking ap...
I particularly like the little status monitor...nice touch.
It would be great if you could also map registry files from a dumped rom. This way you could easily extract registry settings from other phones without the need of the actual device. At this moment you still need the phone.
is this possible
How do you add the SRS enhancer to the iPAQ 110? I tried messing around with the registry, because the installer and reg key didn't work. I uploaded a copy of the driver area (HKLM>Drivers>BuiltIn) of the registry where this is concerned. The key directories that the iPAQ 110 has audio related drivers (corresponding drivers in parenthesis) are:
AudioPath (audiopaht.dll)
WAPIMAN (waveapi.dll)
WaveDev (btcedrivers.dll).
Hope someone can figure it out. Your guys' help will be greatly appreciated.
My Registry File (BuiltIn)
Sorry, ignore this post. I hope I am not too ignorant for this site. I am willing to learn and to be taught. I will try to not to be too much of a bother.
My Registry File (BuiltIn)
Attached is the corresponding reg file (in a zip file).
Close This Topic! I Fixed It! Just Needed To Be Reset A Few Times After Fixing The Reg Keys.
Hi, i have an Herald with the original windows mobile 6 executable i downloaded on a website and i extracted the RUU_signed.nbh, then i used Hypercore to get the OS.nb and then i got the OEM and SYS folders to start building my ROM the way i like it. First i thought about including my own registry modifications and i know those modification have to be installed in the device at the end of everything to over write the default that get install first so in the OEM folder i created a sub folder i called zzz_My_registry_OEM. As you can see, my attempt there is to put the .rgu file in there and because the name of the folder start by zzz, it will obviously be installed at the end. Is that right? Because if i'm wrong please tell me, i never did that before, its my first time cooking a ROM. Then, i face a new problem. I have the complete list of all the registry tweak i want to put in the .rgu file, i know i have to begin the file by REGEDIT4, the lines starting by ";" are not recognise so i can put a note of what the registry is for (for personnal reminder), then at the end of all my registry tweaks, i have to leave a blank line but... I just dont know how to write the lines properly because i know its some sort of code and i have to write in code. I'll show you precisely what i mean. Here i have a tweak to change the temp file to the storage card and it goes like this:
HKEY_LOCAL_MACHINE\System\FileSys
edit temp path key \Storage card\Volatile
Here an other one to change the language of the slide out keyboard to US:
HKEY_CURRENT_USER\ControlPanel\Keybd
create a new string
Name: Locale
Value: 0409
The problem as you can see, that is good if i tweak the registry of my already installed ROM from a registry editor, thats not valid for a .rgu file while cooking a ROM. But i have no idea how to write those codes properly and i found absolutely no instruction no where. And i have a lot more tweaks like that that i want to do. Is there any one here willing to link me to a detailed and intelligent tutorial or to translate my reg tweaks for me so i can finally nail that once for all? I thank you all in advance for your help. Anything could help because even if you dont have a complete answer, i'll do the job of reading the post and take all the bits together and figure it out. Some of you know a little bit that will complete some that an other one know to finally form the big picture.