[Q] How to flash cm7 from honeycomb. - Nook Color Q&A, Help & Troubleshooting

Im usually pretty good with this, but this one has me stumped. I am running Deeper Blue's preview v04. It is not rooted, and honestly too slow to run as a daily driver. I was wanting to flash cm7, but I have not been able to find any specific help regarding that. How can I achieve this? Any assistance you could give would be greatly appreciated.

If you are wanting to flash a rom to the emmc, this is the guide you want.
http://forum.xda-developers.com/showthread.php?t=1030227
For running a rom from a usd card, use this guide.
http://forum.xda-developers.com/showthread.php?t=1000957

thevaristy said:
Im usually pretty good with this, but this one has me stumped. I am running Deeper Blue's preview v04. It is not rooted, and honestly too slow to run as a daily driver. I was wanting to flash cm7, but I have not been able to find any specific help regarding that. How can I achieve this? Any assistance you could give would be greatly appreciated.
Click to expand...
Click to collapse
Try this and make sure you use the latest CWR version (3.2.0.1): http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Note, this is for an internal flash. I don't have a experienced preference for flashing to a SD card. Someone else can add their opinion for that.....

Related

Need some help with an Andoird build for my dad.

Hi
First off all I want to say: I can probably find everything here in the forum but I'll spend hours and hours reading and most off the time I'll read useless info that I don't need so if you have the knowledge and it just takes 5 minutes to share it please help me out I'll be thankful.
I myself have a HTC legend and have read LOTS off posts before finally rooting and flashing custom roms. Now my dad has asked me if I could help him to get android on his HD2.
He needs to be able to sync his agenda with outlook (for work (Calendar and contacts) I read something about HTC sync should be working on newer kernels is it included in some builds then?), and have a stable build (its not a ROM if I'm correct?) one that he could use for daily use. Don't need anything too special (not even root but its not a problem if it does have root access)
So I've started reading around in the development section and from what I read I don't need to root or flash anything, just extract a zip to the SD and name it Android. Is that correct? (then why do you have special android roms?)
So is there someone who can link me to a good stable (no OC kernels and stuff please) Android Build and tell me if there are known bugs with HD2 builds that don't get mentioned in those threats because they are known as general knowledge.
Thanks in advance
If I could ever help you back with HTC legend problem or something I'll gladly do it for you.
grts
Jonas (sorry for the pour English it's not my main language)
I'm reading topics and If I find answers I'll update this but please if you have the knowledge to help me in a few minutes PLEASE do so.
Never mind found this post: http://forum.xda-developers.com/showthread.php?t=782930
and solved most of my questions looks like its not as fully operating as I thought :s.
So It's not just as easy as unzipping and renaming that would have been too easy.
It isn't very complicated to run android on the HD2. I don't know what feature you suspect isn't working that scared you from attempting. Every feature I could want is working. You also don't need to sacrifice windows mobile if you try android. Give it a shot and post again if you have trouble.
Problem is that I need to root and flash other wm Rom if I want everything to work as it should. Or isn't that really necessary? I'll just try a build and see what it does. Thx for th reply
Sent from my Legend using XDA App
JonasDroid said:
Problem is that I need to root and flash other wm Rom if I want everything to work as it should. Or isn't that really necessary? I'll just try a build and see what it does. Thx for th reply
Sent from my Legend using XDA App
Click to expand...
Click to collapse
if you have to hspl your hd2 depends on your stock radio rom version. it should be a newer one like 2.10 or 2.12 to avoid most issues with android. flashing another winmo rom is only necessary if you have robot voice and/or faster playback of music (just to mention 2 problems)... you don't have anything to loose if you try android from stock hd2. if it's not working fine, you may think of flashing a new radio and/or rom!
So if I unzip the file I can dowload here put it into android folder in the root of my SD, I'm good to go? What about that kernel do I need to flash it??
if he uses it for work then i'd suggest laying off android for now
he could still use the WM? It's just like a program no? So by just removing the folder it would be back to normal?
JonasDroid said:
he could still use the WM? It's just like a program no? So by just removing the folder it would be back to normal?
Click to expand...
Click to collapse
You basically reboot the phone and it goes back to wmo. Its almost like running a live linux cd...
When you run HaRet Android takes over the phone. When you reboot it will come back to WinMo. Then you run HaRet again and you back in Android. And so on. WinMo 'lives' on the phone, Android on sd.
So the kernel they are talking about is a fake kernel? (not flashed to the actual ROM)
So if anything goes wrong at first boot with the android I can just pull out the battery without bricking the phone?
JonasDroid said:
So the kernel they are talking about is a fake kernel? (not flashed to the actual ROM)
So if anything goes wrong at first boot with the android I can just pull out the battery without bricking the phone?
Click to expand...
Click to collapse
Its not a fake kernel...it is real but it resides on the sd card so your original wmo stuff will still be there in case you ever need to use wmo again.
new to xda and looking for the build for my hd2
Hello I am new to xda and i have a hd2 it is new and have had it about 5 wks am looking for a way to unlock it and also to put the android os on it. I had a friend of mine try this past wknd to do it and it kept flashing a error code and wouldn't allow us to proceed. Can someone please help direct me in the right direction much appreciated.
pierreg34 said:
Hello I am new to xda and i have a hd2 it is new and have had it about 5 wks am looking for a way to unlock it and also to put the android os on it. I had a friend of mine try this past wknd to do it and it kept flashing a error code and wouldn't allow us to proceed. Can someone please help direct me in the right direction much appreciated.
Click to expand...
Click to collapse
You s should start your own thread. There are many different unlock so specify which one you're after, sim unlock? This section is only for android so if you need help on something else, post it in the hd2 general section, not here. Unless it is android related, you won't find help here.
Ok so if I install this:
http://forum.xda-developers.com/showthread.php?t=773790
I can just remove the file on the SD when it doesn't work like we want it too and everything will be back to normal right?
You are correct.
If it doesnt work for you just erase the android folder. I would recommend flashing hard spl, and changing your radio to 2.12.50.02_2. Then load the hyperdroid 1.6 rom. You will have the best luck with that probably without having to change anything in winmo.
JonasDroid said:
Ok so if I install this:
http://forum.xda-developers.com/showthread.php?t=773790
I can just remove the file on the SD when it doesn't work like we want it too and everything will be back to normal right?
Click to expand...
Click to collapse
I'd recommend using a spare SD card. When you run Android it creates a ton of folders on it, so it's easier to have a dedicated one than to try and delete everything later (if he decides not to stick with Android).
Also, I read through the thread and couldn't see anywhere... did you tell us what radio is on the HD2? It needs to be (I believe) 2.08 or higher, and it's VERY recommended to have a 2.x.50 and not a 2.x.51 radio.
If you flash a 2.x.51 radio on a t-mobile US HD2 you will brick it. Try flashing radio 2.12.50.02_2
johncmolyneux said:
I'd recommend using a spare SD card. When you run Android it creates a ton of folders on it, so it's easier to have a dedicated one than to try and delete everything later (if he decides not to stick with Android).
Also, I read through the thread and couldn't see anywhere... did you tell us what radio is on the HD2? It needs to be (I believe) 2.08 or higher, and it's VERY recommended to have a 2.x.50 and not a 2.x.51 radio.
Click to expand...
Click to collapse
Yeah dno the radio version or the bootloader version.
Do i need root to see that?? Is it just booting while pressing volume down to get the bootloader and the info I need?
Also I read that the HyperDroidV1.6 is overclocked and undervolted and I drather not do that. Just want it as stable as can be. (I know my overclocked legend is stable but if he has a really crappy processor,..)
BTW: I know what overclocking does but what's good about undervolting?? better batterylife?
I think I'll just give this a try this weekend (when my dad (and his phone xD)are home)
JonasDroid said:
Yeah dno the radio version or the bootloader version.
Do i need root to see that?? Is it just booting while pressing volume down to get the bootloader and the info I need?
Click to expand...
Click to collapse
Just reboot the phone. The radio version is shown at the bottom left of the first white HTC screen (R,G,D - R is the radio version).
JonasDroid said:
Also I read that the HyperDroidV1.6 is overclocked and undervolted and I drather not do that. Just want it as stable as can be. (I know my overclocked legend is stable but if he has a really crappy processor,..)
BTW: I know what overclocking does but what's good about undervolting?? better batterylife?
Click to expand...
Click to collapse
I'm assuming undervolting is for better battery life, but have never bothered with it myself. Just have a read of the most popular Android builds to see which you think will work for you. I can recommend FroyoStone Sense v3.1, but I would because that's what I use!
It's so easy to try the different builds that it's no big deal if you play with one and don't like it, so don't be shy - give em all a go if that's what it takes!
Edit: Just noticed your edit from when I was posting. lol

Are you new to the HD2 and want android? Heres an easy way to flash it.

http://quazen.com/shopping/consumer-electronics/how-to-get-android-on-hd2-nand/
Its a walkthrough!
Going to try this now, thanks a lot, makes it super simple
Hi, I downloaded the sense rom, but where is the setup.exe in it? I don't see it anywhere
Thanks!!!......
This guide does not work
looks useful, thx... but the radio changing part is missing
Why would you guys use this guide when there are better ones here on XDA? Most likely, they took that from here too. There are better ROM's on here too v
suweet i will try this out thanks!!
This guide is OK at best (basic) and using this guide only allows you to use DFT builds which are becoming more and more unpopular. CWM is the much perferred and easiest way.
Its been updated to be even easier
I can confirm it works

V6 Supercharger

Has anyone tried this on the NC? http://forum.xda-developers.com/showthread.php?t=991276 I have done some research, but cannot find any threads about running this on the NC. Any help would be greatly appreciated!
Read the bottom of the first post,http://forum.xda-developers.com/showthread.php?t=1344873. Great instructions. I'm installed it on my bootable sd card running CM7 7.1.0 and have seen a great improvement in stability.
I've been using it since day one. It works very well.
Here's a thread from awhile back: http://forum.xda-developers.com/showthread.php?t=1191747
Sent from space
Thanks guys for the reply, but this looks to be Way over my head to accomplish.

ics on galaxy tab sch 1800

Hi all
I am trying to install ICS on my Verizon original Galaxy Tab. I have rooted it. and it's running galaxy cubed. (actually a friend did this so i don't know exactly what he did) we found several different roms for ICS but none worked.
Does anyone have any idea? or know how to do this?
oops
oh yeah i have cmw 2 running. i think i need a newer version of this. any idea where i can find that? i am really new at this! thanks for any help
Good to see more users on here with sch-i800. I have 2 of them one i put cm9.1 and the other is having some issues which i am trying to resolve.You can get cm9.1 stable you can get it from http://get.cm. The Verizon tab it the p1c also download the gapps from http://goo.im/gapps. you will need these 2 files to get things working properly with ics on your verizon galaxy tab. You need CMW 5 or better to flash it. i suggest following this guide to get to cm9 http://geekniggle.blogspot.com/2011/12/loading-ice-cream-sandwich-on-verizon.html
if you have any futher questions please feel free to ask.
thanks
Thanks! I have ICS up and running and love it so far. However the TV out doesnt recognize the cable any more. Do you know a way to resolve this or is it the bug i have to deal with?
thanks again for your help!
ok.. So I am asking... lol
Let me start off by saying I am extremely new to this whole process, but I do have a SCH-I800 and I would like to see about updating it. and I noticed on the post you had a link to an blog posting on a guide to do this, but that link doesn't seem to work. Any chance I could get that link from you? I am not sure what all the abbreviations are listed below (CMW5, p1c, etc). Does this "guide" also tell you what you need to download to make this work?
Thanks for helping a Newbie out...
I have had the tab since May 2011 and have ran every Rom imaginable. I never could get the video out to work on any cyanogenmod roms. I am back to running 2.3.4 rooted since it seems to run smoother and everything works.
Sent from my SCH-I800 using xda app-developers app

What's stable and available for Nook Color right now?

I'd really love to install Nougat, but I know that LineageOS isn't ready for Nook Color yet. I'm stuck running Jellybean, and it's too outdated for my needs. I've been researching for hours with few useful leads.
Does anyone have advice?
Batshua said:
I'd really love to install Nougat, but I know that LineageOS isn't ready for Nook Color yet. I'm stuck running Jellybean, and it's too outdated for my needs. I've been researching for hours with few useful leads.
Does anyone have advice?
Click to expand...
Click to collapse
Cm11 will be the best you get given the limited hardware of the device. Just get it from the cyanogen mod archive server
cyanogen mod archive server???? where would I find that?
I still have a nookHD+: BNRV200 that's stuck at the update page and I lost the microsd card that was in it(any help here would be great). But here's what I need help on - I bought A BNRV200 and 2 BNTV250-A I'd love to put CM10 in them but I can't find the files or even what files are needed to do that. I did find the sideload_update_1-1 yesterday but I still need to know where ans what else to get. Please help, thanks
Cm7.2
After fighting with cm10 and cm11 for a month, I tried cm7.2 and it worked first try. I wasted/spent many hours searching for matching cm gapp
cwm generics files
RerunNook said:
Cm7.2
After fighting with cm10 and cm11 for a month, I tried cm7.2 and it worked first try. I wasted/spent many hours searching for matching cm gapp
cwm generics files
Click to expand...
Click to collapse
do you still have links by chance? i keep getting 404s and files not found
vertigon said:
do you still have links by chance? i keep getting 404s and files not found
Click to expand...
Click to collapse
See: https://forum.xda-developers.com/t/archive-roms-recoveries-more.4107239/
nmyshkin said:
See: https://forum.xda-developers.com/t/archive-roms-recoveries-more.4107239/
Click to expand...
Click to collapse
awesome, thanks!

Categories

Resources